GAZETTE NOTICE NO. 11094

PURSUANT to section 9(1) of the Standards Act, the National Standards Council declares the specifications or codes of practice 21st November, 2008 THE KENYA GAZETTE 3003 . appearing in, the schedule hereto to be Kenya Standards with effect from the date of publication of this notice. Number Title of $pecOcation or Code of Practice Chemical KS 1797: 20(!8 softeners—Specification: first Edition Kenya Standard—Household' fabric KS ISO 111513: 1997 Kenya Standard—Lubricants: industrial oils and related (class L)—Family H (hydraulic systems)— Specifications for categories /1H: HL: HM: HR: HV and HG First Edition KS ISO 12922: 1999 Kenya Standard—Lubricants: industrial oils and related products (class L)—Family H (hydraulic systems)—Specifications for categories HFAE: HFAS: HFB: HFC: HFDR and HFDU: First Edition KS ISO 15380: 2002 Kenya Standard—Lubricants: industrial oils and related products (class L)—Family H (hydraulic systems)— Specifications for- tategories HETG: HEPG: HESS and HEPR: First Edition KS ISO 10155: 1995 Kenya Standard—Stationary source emissions —Automated monitoring of mass concentrations of particles—Performance characteristicr test methods and specfficatimis: First Edition KS ISO 10397: 1993 Kenya Standard—Stationary source emissions—Determination of asbestos plant emissions—Method by fibre count measurement: first Edition KS ISO 770811995 Kenya Standard—Air quality—Particle size fraction definitions for health- related sampling: first Edition KS ISO 4224: 2000 Kenya Standard—Ambient air— Determination of carbon monoxide —Non- dispersive infrared spectrometric method: First Edition KS ISO 6767: 1990 Kenya Standard—Ambient air— Determination of the• mass concentration of sulfur dioxide —Tetrachlotomercumte (TCM)/pararesaniline method: First. Edition KS ISO 7996: 1985 Kenya Standard—Ambient air— Determination of the mass concentration of nitrogen oxides — Chemiluminescence method: first Edition KS ISO 8186:11989 Kenya Standard —Ambient air— Determination of the mass concentration of carbon monoxide—Gas chromatographic method: First Edition KS ISO 10312: 1995 Kenya Standard—Ambient air— Determination of asbestos fibres— Direct transfer transmission electron microscopy method: First Edition KS ISO 10473:2000 Kenya Standard—Ambient air— Measurement of the mass of • particulate matter on a filter medium—Beta-ray absorption method: First Edition KS ISO 13964: 1998 Kenya Standard—Air quality— Determination of ozone in ambient air- . Ultraviolet photometric method: First Edition KS ISO 7168-1: 1999 Kenya Standard—Air quality—Exchange of data Part I : General data format: First Edition KS ISO 7168-2: 1999 Kenya Standard—Air quality— Exchange of data Part 2: Condensed data format: First Edition Kenya Standard—Air quality—Definition and determination of performance characteristics of an automatic measuring system: first Edition Kenya Standard—Indoor air Part 3: Determination of formaldehyde and other carbonyl compounds —Active sampling method: First Edition • KS 1808:2008: Kenya Standard—Composite Flour — Specification: Second Edition KS ISO 9648: 1988 Kenya Standard—Sorghum - Determination of tannin compounds: First Edition Kenya Standard—Determination of trypsin inhibitor activity of soya products: First Edition Kenya Standard—Energy Drinks— Specification Part I: Ready to Drink: Fifth Edition Kenya Standard-Substitute vinegar — Specification: Second Edition Kenya Standard—Whole dried and ground nutmeg—Specification : Second Edition Kenya Standard—Animal and vegetable fats and oils —Determination of conventional mass per Volume (litre weight in air. First Edition Kenya Standard—Determination of tocopherol and tocotrienol contents by HPLC—Animal and vegetable fats and oils—Determination of tocopherol and tocotrienol contents by high-performance liquidehromatography: first Edition, KS ISO 12228: 1999 Kenya Standard—Animal and vegetable fats and oils —Determination of individual and total sterols contents—Gas chromatographic method: First Edition KS 241: 2008 Kenya Standard—Biscuits—Specification: Fourth Edition KS 2164: 2008 Kenya Standard—Biscuits—Test methods: First Edition KS 552:2008 Kenya Standard Grapefruit Juice Preserved Exclusively by Physical Means— Specification: Second Edition KS 1176: 2008 Kenya Standard—Specification For Canned Peaches: Second Edition KS 319-4: 2008 Kenya Standard—Sugar confectionery— Specification Part 4: Other Sugar Confectionery Products: Second Edition Agriculture KS 672: 2008 Kenya Standard Fresh Mushrooms Specification Second Edition KS 2151: 2008 Kenya Standard—Groundnut for Oil Milling — Specification: First Edition KS 2132-1: 2008 Kenya Standard—Cat foods —Specification Part I: Complete meal: First Edition KS 674-1: 2008 Kenya Standard—Dog foods—Specification Part I : Complete meal: Third Edition KS ISO 17372: 2008 Kenya Standard—Animal feeding stuffs — Determination of zeamlenone by immunoaffinity column chromatography and high performance liquid chromatography: First Edition KS ISO 9169: 2006 KS ISO 16000-3: 2001 Food KS ISO 14902: 2001 KS 1054-1: 2008 KS 1284: 2008 KS 1155: 2008 KS ISO 6883: 2007 KS ISO 9936: 2006 KS ISO 17604: 2003 Kenya Standard—Microbiology of food and animal feeding stuffs—Carcass sampling for microbiological analysis: First Edition KS ISO 18593: 2004 Kenya Standard—Microbiology of food and animal feeding stuffs—Horizontal methods for sampling techniques from surfaces using contact plates and swabs: First Edition KS ISO 21528-2: 2004 Kenya Standard—Microbiology of food and animal feeding stuffs—Horizontal methods for the detection and enumeration of Enterobacteriaceae Part 2: Colony-count method: First Edition KS ISO 21807: 2004 Kenya Standard—Microbiology of food and animal feeding stuffs—Determination of water activity: First Edition KS ISO 16140: 2003 Kenya Standard—Microbiology of food and animal feeding stuffs—Protocol for the validation of alternative methods: First Edition KS ISO 15213: 2003 Kenya Standard—Microbiology of food and animal feeding stuffs—Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions: First Edition KS ISO 7218: 1996 Kenya Standard—Microbiology of food and animal feeding stuffs - General rules for microbiological examinations: First Edition KS ISO 10273: 2003 Kenya Standard—Microbiology of food and animal feeding stuffs Horizontal method for the detection of presumptive pathogenic Yersiniaenterocolitica: First Edition KS ISO 8607: 2003 Kenya Standard—Artificial insemination of animals—Frozen semen of breeding bulls— Enumeration of living aerobic microorganisms: First Edition Mechanical KS ISO 17454: 2005 Kenya Standard—Plastic piping systems- Multilayer pipes—test methods for adhesion of the different layers using a pulling rig: First Edition KS ISO 15975: 2002 Kenya Standard—Closed end blind rivets with break pull mandrel and protruiling head—AVAIA: First Edition KS ISO 15976: 2002 Kenya Standard—Closed end blind rivets with break pull mandrel and protruding head—St/St: First edition KS ISO 15977: 2002 Kenya Standard—Open end blind rivets with break pull mandrel and protruding head —AIA/St: First Edition KS ISO 15978: 2002 Kenya Standard—Open end blind rivets with break pull mandrel and countersunk head —AIA/St: First Edition KS ISO 15979: 2002 Kenya Standard—Open end blind rivets with break pull mandrel and protruding head—St/St: First Edition KS ISO 15980: 2002 Kenya Standard—Open end blind rivets with break pull mandrel and countersunk head—St/St: First Edition KS ISO 15981: 2002 Kenya Standard—Open end blind rivets with break pull mandrel and protruding head —AIA/AIA: First Edition KS ISO 15982: 2002 Kenya Standard—Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA: First Edition KS ISO 15983: 2002 Kenya Standard—Open end blind rivets with break pull mandrel and protruding head—A2/A2: First Edition KS ISO 15984:2002 KS 2122: 2008 KS 2121: 2008 KS 2155: 2008 KS 574: 2008 KS ISO 11119-1: 2002 KS ISO ISO 11119-2: KS ISO 11119-3: 2002 KS ISO 11623: 2002 KS ISO 14245: 2006 KS ISO 15995: 2006 KS ISO 14246: 2001 KS ISO 11117: 1998 • KS ISO 11621: 1997 KS ISO 11622: 2005 KS ISO 6520-1: 2007 KS ISO 6520-2: 2001 Civil KS 516:2008 KS 573: 2008 KS 2130: 2008 Kenya Standard—Open end blind rivets with break pull mandrel and countersunk head—A2/A2: First Edition Kenya Standard —Ccide of practice: the storage and handling of liquid fuel—Large consumer installations: First Edition Kenya Standard—Fountain pen — Specification: First Edition Kenya Standard—File fastener— Specification: First Edition Kenya Standard—Steel fabric for the reinforcement of concrete —Specification: Third Edition ' Kenya Standard—Gas cylinders of composite construction—Specification and test methods Part 1: Hoop wrapped composite cylinders: First Edition 2002 Kenya Standard—Gas cylinders of composite construction—Specification and test methods Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners: First Edition Kenya Standard—Gas cylinders of composite construction—Specification and test methods Part 3: Fully wrapped fibre reinforced composite gas cylinders with non- load:sharing metallic or non-metallic liners. First Edition Kenya Standard—Transportable gas cylinders—Periodic inspection and testing of composite gas cylinders: First Edition Kenya Standard —Gas • cylinders— Specification and testing of LPG cylinder valves—Self closing: First Edition Kenya Standard—Specifications and testing of LPG cylinder valves—Manually operated: First Edition Kenya Standard —Transilortable gas cylinders —Gas cylinder valves— Manufacturing tests and inspections: First Edition Kenya Standard —Gas cylinders—Valve protection caps and valve guards for industrial and medical gas cylinders— Design: construction and tests: First Edition Kenya Standard—Gas cylinders—Procedure for change of gas service: First Edition Kenya Standard —Gas cylinders— Conditions for filling gas cylinders: First Edition Kenya Standard—Welding and allied processes —Classification of geometric imperfections in metallic materials Part I: Fusion welding: First Edition Kenya Standard—Welding and allied processes —Classification of geometric imperfections in metallic materials Part 2: welding with pressure: First Edition Kenya Standard —Woodpoles for power and telecommunication lines — Specification: Second Edition Kenya Standard—Specification for high yield steel bars for the reinforcement of concrete: Third Edition Kenya Standard—Grout for jointing marble: 21st November, 2008 THE KENYA GAZETTE 3005 granite: 'ceramic and porcelain tiles— Cement based—Specification: Rrst Edition Kenya Standard—Adhesives for tiles Part 1: Determination of transverse deformation for cementitious adhesives and grouts: Rrst Edition Kenya Standard—Adhesives and grouts for tiles Part 2: Determination of chemical resistance of reaction resin mortars: First Edition Kenya Standard—Adhesives and grouts for tiles Part 3: Determination of resistance to abrasion for grouts: First Edition Kenya Standard—Adhesives and grouts for tiles Part 4: Determination of flexural and compressive strength for grouts: First Edition Kenya Standard—Adhesives and grouts for tiles Part 5: Determination of shrinkage for grouts: First Edition Kenya Standard—Adhesives and grouts for tiles Part 6: Determination of water absorption for grouts: First Edition Kenya Standand—Adhesives and grouts for tiles—Test Methods Part 7: Concrete slab for test: Rrst Edition Kenya Standard—Adhesives and grouts for tiles—Test Methods Part 8: Determination of slip for adhesives: First Edition Kenya Standard—Adhesives and grouts for tiles—Test Methods Part 9: Determination of shear adhesion strength of dispersion adhesives: First Edition - Kenya Standard—Adhesives and grouts for tiles—Test Methods Part 10: Determination of wetting capability for adhesives: First Edition Kenya Standard—Adhesives and grouts for tiles—Test Methods Part 11: Determination of tensile adhesion strength for cementitious adhesives: First Edition KS ISO 12957-1' 2003 Kenya Standard--Geosynthetics - Determination of friction characteristics Part 1:Direct Shear test: First Edition KS ISO 12957-2: 2005 Kenya Standard —Geosynthetics - Determination of friction characteristics Part 2:Inclined plane test: First Edition KS ISO 13426-I: 2003 Kenya Standard —Geotexti les and leotextile-related prorlucts-strength of internal structural juctions Part 1: Geocells: First Edition KS ISO 13426-2: 2005 Kenya Standard-Geotextiles and geotextile-related products-strength of internal structural juctions Part 2: Geocomposites: First Edition KS ISO/TR 13434: 1998 Kenya Standard —Geotextiles and geotextile-related ,products - Guidelines on durability: First Edition KS ISOrfR 12960: 1998 Kenya Standard — Geotextiles and geotextile-related products - Screening test method for determining the resistance to liquids: First Edition KS ISO 10834:1992 Kenya Standard—Textile floor coverings Non-destructive measurement of pile thickness above the backing- WRONZ gauge method: First Edition KS ISO 10965: 199 Kenya Standard—Textile Floor Coverings —Determination of electrical resistance: First Edition KS ISO 13746: 2000 Kenya Standard—Textile floor coverings - Guidelines for installation and use on stairs: First Edition KS ISO 13750: 2000 Kenya Standard—Textile floor coverings - Determination of resistance to staining by acid food colours: First Edition KS ISO 17504: 1999 Kenya Standard—Textile floor coverings - Determination of wool fibre integrity using an abrasion machine: First Edition KS ISO 13936-1: 2004 Kenya Standard—Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics Part 1: Fixed seam opening method: First Edition KS ISO 13936-2: 2004 Kenya Standard—Textiles - Determination of the slippage resistance of yams at a seam in woven fabrics Part 2: Fixed load method: First Edition KS ISO 13936-3: 2005 Kenya Standard—Textiles . - Determination of the slippage resistance of yarns at a seam in woven fabrics Part 3: Needle clamp method: First Edition KS ISO 1140:2004 Kenya Standard—Fibre ropes - Polyamide- 3-:4-and 8- strand ropes: First Edition KS ISO 1141: 2004 Kenya Standard—Fibre ropes - Polyester-3- :4- and 8- strand ropes: First Edition KS ISO 1181: 2004 Kenya Standard—Rbre ropes - Manila and sisal 3-smnd: 4-strand and 8-strand ropes: First Edition KS ISO 2417: 2002 Kenya Standard—Leather - Physical and mechanical tests - Determination of static absorption of water: First Edition KS ISO 2588: 1995 Kenya Standard—Leather - Sampling - Number of items for a gross sample: First Edition KS ISO 4044: 2008 Kenya Standard—Leather - Preparation of chemical test samples: First Edition KS ISO 4045: 2008 Kenya Standard—Leather - Determination of pH: First Edition KS ISO 1833-I: 2006 Kenya Standard—Textiles - Quantitative chemical analysis Part I: General principles of testing: First Edition KS ISO 1833-2: 2006 Kenya Standard—Textiles - Quantitative chemical analysis Part 2:Temary fibre mixtures: First Edition KS ISO 1833-3: 2006 Kenya Standard—Textiles - Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibres (method using acetone): First Edition KS ISO 1833-4: 2006 Kenya Standard—Textiles - Quantitative chemical analysis Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite): First Edition KS ISO 1833-5: 2006 Kenya Standard—Textiles - Quantitative chemical analysis Part. 5: Mixtures of viscose: cupro or modal and cotton fibres (method using sodium zincate): First Edition KS ISO 1833-6:2006 Kenya Standard—Textiles - Quantitative chemical analysis Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using fdrmic acid and zinc chloride): First Edition KS ISO 1833-7: 2006 Kenya Standard—Textiles = Quantitative chemical ,analysis Part 7: Mixtures of KS 2167-1: 2008 KS-2167-2: 2008 KS 2167-3: 2008 KS 2167-4: 2008 KS 2167-: 2008 KS 2167-6: 2008 KS 2167-7: 2008 KS 2167-8: 2008 KS 2167-9: 2008 KS 2167-10: 2008 KS 2167-11: 2008 Textile polyamide and certain other fibres (method using formic acid): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 8: Mixtures of acetate and triacetate fibres (method using acetone): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol): First Edition Kenya Standard—Textiles-quantitative chemical analysis: Part 10 :Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 12: Mixtures of acrylic: certain modacrylics: certain chlorofibres: certain elastanes and certain other fibres (method using dimethylformamidek First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 13: Mixtures of chlorofibres and certain- other fibres (method using carbon disulfide/acetone): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 14: Mixtures of acetate and chlorofibres (method using acetic acid): First Edition Kenya Standard—Textiles - Quantitative chemical analysis: Part 15: Mixtures of jute and certain animal fibres (method using nitrogen content): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (method using sulfuric acid): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 19: Mixtures of cellulose. fibres and asbestos (method by heating): First Edition Kenya Standard—Textiles - Quantitative chemical analysis Part 21:Mixtures of chlorofibres: certain modacrylics: certain elastanes: acetates: triacetates and certain other fibres (method using cyclohexanone): First Edition Kenya Standard—Optics and optical instruments—Reference wavelengths: First Edition Kenya Standard—Optics and Optical instruments - Optical transfer function - Definitions and mathematical relationships: First Edition KS ISO 1833-8: 2006 KS ISO 1833-9: 200 KS ISO 1833-10:2006 KS ISO 1833-11: 2006 KS ISO 1833-12: 2006 KS ISO 1833-13: 2006 KS ISO 1833-14: 2006 KS ISO 1833-15: 2006 KS ISO 1833-16: 2006 KS ISO 1833-17: 2006 KS ISO 1833-18: 2006 KS ISO 1833-19: 2006 KS ISO 1833-21: 2006 ELKO°technical KS ISO 7944: 1998 KS ISO 9334: 1995 KS ISO 9039: 2008 Kenya Standard—Optics and optical instruments - Quality evaluation of optical systems - Determination of distortion: First Edition KS ISO 15529: 2007 Kenya Standard—Optics and optical instruments—Optical transfer function— Principles of measurement of modulation transfer function (MTF) of sampled imaging systems: First Edition KS ISO 11421: 1997 Kenya Standard—Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement: First Edition KS ISO 13653: 1996 Kenya Standard—Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field: First Edition KS ISO 15368: 2001 Kenya standard—Opiics and optical instruments—Measurement of reflectance of plane surfaces and transmittance of plane parallel elements: First Edition KS ISO/CE 10526: 2007 Kenya Standard—CIE standard illuminants for colorimetry: First Edition KS IEC 61966-2-2: 2003 Kenya Standard—Multimedia systems and equipment - Colour measurement and management - Part 2-2: Colour management - Extended RGB colour space - scRGB: First Edition KS ISO 9849: 2000 Kenya Standard—Optics and optical instruments -- Geodetic and surveying instruments - Vocabulary: First Edition KS ISO 12858-1: 1999 Kenya Standard—Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 1: Invar levelling staffs: First Edition KS ISO 12858-2: 1999 Kenya Standard—Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 2: Tripods: First Edition KS ISO 17123-1: 2002 Kenya Standard—Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 1:Theory: First Edition KS ISO 17123-2: 2001 Kenya Standard—Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 2:Levels: First Edition KS ISO 17123-3: 2001 Kenya Standard: Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 3:Theodolites: First Edition KS ISO 17123-4: 2001 Kenya Standard—Optics and optical instruments -- Field, procedures for testing geodetic and surveying instruments -- Part 4:. Electro-optical distance meters (EDM inst-uments) First Edition KS ISO 17123-6: 2003 Kenya Standard—Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 6: Rotating lasers: First Edition Services KS ISO 11193-I: 2002 Kenya Standard—Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or rubber solution: First Edition KS ISO 11193-2: 2006 • Kenya Standard—Single-use medical examination gloves Part 2: Specification for gloves made from poly (vinyl chloride): First Edition KS ISO 13666: 1998 Kenya Standard Ophthalmic optics- 21st November, 2008 THE KENYA GAZETTE Spectacle lenses—Vocabulary: First Edition KS ISO 24214: 2006 Kenya Standard—Skin barrier for ostomy aids —Vocabulary: first Edition KS ISO 4135: 2001 Kenya Standard—Anaesthetic and respiratory - equipment—Vocabulary (INTERNATIONALE): First Editron KS ISO 22609: 2004 Kenya Standard Clothing for protection against infectious agents—Medical face masks—Test method for resistance against penetration by synthetic blood (fixed volume: horizontally projected): First Edition KS ISO 3534-1: 2006 Kenya Standard —Statistics—Nocabulary and Symbols Part 1: Probability4nd general statistical ferms: first Edition KS ISO 3534-2: 2006 Kenya Standard—Statistics—Vocabulary and, symbols Part 2: Applied statistics: First Edition KS ISO 3951-2: 2006 Kenya Standard—Sampling procedures for inspection by variables Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics: First. Edition KS ISO 3951-3: 2007 Kenya Standard—sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance . quality limit (AQL) for lot-by-lot inspection: First Edition KS ISO 395 1-5: 2006 Kenya Standard—Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation): First Edition KS ISO 2859-10: 2006 Kenya Standard—Sampling procedures for inspection by attribute *Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes: First Edition KS ISO TIC 23081-2: 2003 Kenya Standard—Information and, documentation —ReCords management processes - Metadata for records Part 2: Conceptual and implementation issues: First Edition KS ISO/PS 12029: 2007 Ktnya Standard—Electronic imaging- Formi design optimization for electronic image management: First Edition KS ISO 1 1428: 1996 Kenya Standard—Ergonomics—Visual danger signals — General requirements: design and testing: First Edition KS ISO 13406-1: 1999 Kenya Standard—Ergonomic requirements for work with visual displays based on flat panels Part 1: Introduction: First Edition KS ISO 13406-2: 2001 Kenya Standard— Ergonomic requirements for work with visual displays based on flat panels Part 2: Ergonomic requirements for flat panel displays: First Edition KS 2041: 2008 KS 2040: 2008 KS 1180:1994 KS 1295: 1996 Kenya Standard—Ethanol for industrial use—Specification, First Edition Kenya Standard—Calcium chloride — Specification, First Edition Kenya Standard-Specification for diabetone alcohol for industrial use, First Amendment September 2008 Kenya Standard—Specification for diacetone alcohol. First Amendment September 2008 KS 1942: 2005 Kenya Standard—Bathing bats— Specification. first Amendment September KS ISO 2007: 2007 Kenya Standard— Rubber, unvulcanized — Determination of plasticity - Rapid plastimeter method, Second Edition KS ISO 6101-5: 2006 Kenya Standard—Rubber—Determination of metal content by atomic absorption spectrometry Part 5: Determination of iron content,Second Edition KS ISO 1437: 2007 Kenya Standard—Rubber compounding ingredients—Carbon black ,—Determination of sieve residue, Second Edition KS ISO 1138: 2007 Kenya Standard— Rubber compounding ingredients—Carbon black—Determination of sulphur. Second Edition KS ISO 1795: 2007 Kenya Standard—Rubber, raw natural and raw synthetic—Sampling and further preparative procedures, Second Edition KS ISO 4097:2007 Kenya Standard—Rubber. ethylene- propylene-diene (EPDM)— Evaluation procedure, Second Edition Kenya Standard—Products used for treatment of water intended for human consumption —Bone charcoal — Specification, First Edition KS 2158: 2008 Kenya Standard—Chemicals used for treatment of water intended for human consumption—Liquefied chlorine gas — Specification. First Edition Kenya Standard—Chemicals used for treatment of water intended for human consumption —Chlorine Dioxide — Specification, first Edition KS ISO 10780: 1994 Kenya Standard—Stationary source emissions—Measurement of velocity and volume flow rate of gas streams in ducts, First Edition KS ISO 11338-1: 2003 Kenya Standard—Stationary source emissions—Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part I: Sampling. First Edition KSISO 11338-2: 2003 Kenya Standard—Stationary source emissions —Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 2: Sample preparation. clean-up and determination, First Edition KS ISO 7870-I:2007 Kenya Standard—Control charts Part L: General guidelines: First Edition KS ISO 8422: 2006 Kenya Standard—Sequential sampling plans Environment for inspection by attributes: First Edition KS 2161: 2008 KS ISO 19005-1: 2005 Kenya Standard—Document management —Electronic document file format for long- term preservation Patti:- Use of PDF 1.4 (PDF/A-I): First Edition KS ISO 2033: 2001 Kenya Standard—Electronic imaging— Guidance and selection of document image compression methods: First Edition KS ISO 10196: 2003 Kenya - Standard—Document imaging KS 2159:2008 application —Recommendations for the creation of original document: first Edition KS ISOITR 18492: 2005 Kenya Standard—Long-term preservation of electronic document-based information: First Edition KS ISO 11564: 1998 Kenya Standard—Stationary source emissions—Determination of the mass concentration of nitrogen oxides- Naphthylethylenediamine photometric method, First Edition KS ISO 11632: 1998 Kenya Standard—Stationary source emissions—Determination of mass concentration of sulfur dioxide—Ion chromatography method, First Edition KS ISO 12039: 2001 Kenya Standard—Stationary source emissions—Determination of carbon monoxide, carbon dioxide and oxygen — Performance characteristics and calibration of automated measuring systems, First Edition KS ISO 12141:2002: Kenya Standard—Stationary source emissions—Determination of mass concentration of particulate matter (dust) at low concentrations—Manual gravimelric method, First Edition 2008 KS ISO 14164: 1999 Kenya Standard—Stationary source emissions—Determination of the volume flowrate of gas streams in ducts— Automated method, First Edition KS ISO 15713: 2006 • Kenya Standard—Stationary source emissions—Sampling and determination of gaseous fluoride content, First Edition KS ISO 11041: 1996 Kenya Standard—Workplace air— Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour—Method by hydride generation and atomic absorption spectrometry, First Edition KS ISO 111-74: 1996 Kenya Standard—Workplace air—. Determination of particulate cadmium and cadmium compounds—Flame and electrotherrnal atomic absorption spectrometric method, First Edition KS ISO 15202-1: 2000: Kenya Standard— Workplace air— Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 1: Sampling, First Edition KS ISO 15202-2: 2001 Kenya Standard—Workplace air— Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation, First Edition KS ISO 15202-3: 2004 Kenya Standard—Workplace air— Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Analysis, First Edition KS ISO 15767:2003: Kenya Standard—Workplace atmospheres— Controlling and characterizing errors in weighing collected aerosols, First Edition KS ISO 16107: 1999 Kenya Standard—Workplace atmospheres—Protocol for evaluating the performance of diffusive samplers, First Edition KS ISO 16200-1: 2001 Kenya Standard—Workplace air quality— Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 1: Pumped sampling method, First Edition KS ISO 16200-2: 2000 Kenya Standard—Workplace air quality— Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 2: Diffusive sampling method, First Edition KS ISO 16702: 2001 Kenya Standard—Workplace air quality— Determination of total isocyanate groups in air using 2-(1-methoxyphenyl)piperazine and liquid chromatography, First Edition KS ISO 16740: 2005 Kenya Standard—Workplace air— Determination of hexavalent chromium in airborne particulate matter—Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide, First Edition KS ISO 17733: 2004 Kenya Standard—Workplace air— Determination of mercury and inorganic mercury compounds—Method by cold- vapour atomic absorption spectrometry or atomic fluorescence spectrometry, First Edition KS ISO 17734-1:2006 Kenya Standard— Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 1: Isocyanates using dibutylamine derivatives, First Edition KS ISO 17734-2: 2006 Kenya Standard—Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives, First Edition • KS ISO 20552: 2007 Kenya Standard—Workplace air— Determination of mercury vapour Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry, First Edition KS ISO 10498: 2004 Kenya Standard—Ambient air— Determination of sulfur dioxide -- Ultraviolet fluorescence method, First Edition KS ISO 12884: 2000 Kenya Standard—Ambient air— Determination of total (gas and particle- phase) polycyclic aromatic hydrocarbons— Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses, First Edition KS ISO 13794: 1999 Kenya Standard—Ambient air— Determination of asbestos fibres —Indirect- transfer transmission electron microscopy method, First Edition KS ISO 14965: 2000 Kenya Standard—Air quality— Determination of total non-methane organic compounds—Cryogenic preconcentration and direct flame ionization detection method, First Edition KS ISO 14966: 2002 K"nya Standard—Ambient air— Determination of numerical concentration of inorganic fibrous particles—Scanning electron microscopy method, First Edition KS ISO 16362: 2005 Kenya Standard—Ambient air— Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography, First Edition KS ISO 11222: 2002 Kenya Standard —Air quality— Determination of the uncertainty of the time average of air quality measurements, First Edition KS ISO 13752: 1998 Kenya Standard—Air quality—Assessment of uncertainty of a measurement method under field conditions using a second method as reference, First Edition 21st November, 2008 KS ISO 14956 2002 Kenya Standard—Air quality—Evaluation of the suitability of a measurement procedure by comparison with a • required measurement uncertainty, First Edition KS ISO 20988: 2007 Kenya Standard—Air quality — Guidelines for estimating measurement uncertainty, First Edition KS ISO 16622: 20b2 Kenya Standard—Meteorology Sonic anemometers/thermometers— Acceptance test methods for mean wind measurements, First Edition KS ISO 17713-1: 2007 Kenya Standard—Meteorology—Wind measurements Part I: Wind tunnel test methods for rotating anemometer performance, First Edition Kenya Standard—Meteorology—Air temperature measurements—Test methods for comparing the performance of thermometer shields/screens and defining important characteristics, First Edition KS ISO 16000-1: 2004 Kenya Standard—Indoor air Part 1: General aspects of sampling strategy, First Edition KS ISO 16000-2:2004 Indoor air Part 2: Sampling strategy for formaldehyde, First Edition KS ISO 16000-4: 2004 Kenya Standard—Indoor air Part 4: Determination of formaldehyde -- Diffusive sampling method, First Editioh KS ISO 16000-5: 2007 Kenya Standard—Indoor air Part 5: Sampling strategy for volatile organic compounds (VOCs), First Edition KS ISO 16000-6: 2004 Kenya Standard— Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID, First Edition KS ISO 16000-8:2007 Kenya Standard—Indoor air Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions, First Edition KS ISO 16000-9: 2006 Kenya Standard—Indoor air Part 9: Determination of the emission of volatile organic compounds from building products and furnishing Emission test chamber method, First Edition KS ISO 16000-10:2006 Kenya Standard—Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing -- Emission test cell method, First Edition KS ISO 16000-11: 2006 Kenya Standard—Indoor air Part 11: • Determination of the emission of volatile organic compounds from building products and furnishing -- Sampling, storage of samples and preparation of test specimens, First Edition KS ISO 16017-1: 2000 Kenya Standard—Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/themial desorption/capillary gas chromatography Part I: Pumped sampling, First Edition KS ISO 16017-2: 2003 Kenya Standard—Indoor, ambient and workplace air — Sampling and 'analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Part 2: Diffusive sampling, First Edition KS 03-809-1: 19: Kenya Standard—Specification for toilet cleansers Part 1: Powder toilet bowl cleanser KS 03-927: -1997 Kenya Standard—Specification for disinfecting general purpose detergents KS 03-928: 1997 Kenya Standard—Glossary of terms relating to disinfectants KS 03-698-1: 1998 Kenya Standard—Specification for liquid detergents Part 1: Detergents for household hand dish washing KS 698-2: 1999 Kenya Standard—Specification for liquid synthetic detergent Part 2: General purpose liquid synthetic detergent KS 1290-1: 1999 Kenya Standard—Specification for bleaching agents Part I: Sodium hypochlorite solutions • KS 1695: 2001 Kenya Standard—Specification for solvent- emulsion degreasers KS 1696:2001 Kenya Standard—Specification for detergent for industrial dishwashing equipment KS 92-3: 2003 Kenya Standard— Synthetic detergent powders—Specification Part 3: Determination of surfactants—Test methods Food KS CODEX STAN 193:1995 Kenya Standard—Codex general standard for contaminants and toxins in foods, First Edition KS CAC/RCP 60: 2005 Kenya Standard—Code of practice for the prevention and reduction of inorganic tin contamination in canned foods, First Edition KS CAC/RCP 56: 2004 Kenya Standard—Code of practice for the prevention and reduction of lead contamination in foods, First Edition KS 998: 2008 Kenya_ Standard — Chocolates — Specification, Second Edition KS 702: 2008 Kenya Standard —Vinegar — Specification, Second Edition Mechanical engineering KS ISO 3633: 2002 Kenya Standard—Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings- Unplasticized poly(vinyl chloride) (PVC-U), First Edition KS ISO 265-1: 1988 Kenya Standard—Pipes and fittings of plastics materials —Fittings for domestic and industrial waste pipes—Basic dimensions: Metric series. Part I: Unplasticized poly (vinyl chloride) (PVC- U), First Edition KS ISO 4427-1: 2007 Kenya Standard—Plastics piping systems— Polyethylene (PE) pipes and fittings for water supply Part 1: General, First Edition KS ISO 4427-2: 2007 Kenya Standard—Plastics piping systems— Polyethylene (PE) pipes and fittings for water supply Part 2: Pipes, First Edition KS ISO 4427-3: 2007 Kenya Standard—Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply Part 3: Fittings, Mit Edition KS ISO 4427-5: 2007 Kenya Standard—Plastics piping systems— Polyethylene (PE) pipes and fittings for water, supply Part 5: Fitness for purpose of the system, First Edition KS ISO 15874-1: 2003 Kenya Standard—Plastics piping systems for hot and cold water installations- KS ISO 17714: 2007 Polypropylene (PP) Part I: General, First Edition KS ISO 15874-2: 2003 Kenya Standard—Plastics piping systems for hot and cold water installations— Polypropylene (PP) Part 2: Pipes, First Edition KS ISO 15874-3: 2003 Kenya Standard—Plastics piping systems for hot and cold water installations— Polypropylene (PP) Part 3: Fittings, First Edition KS ISO 15874-5: 2003 Kenya Standard—Plastics piping systems for hot and cold water installations— Polypropylene (PP) Part 5: Fitness for purpose of the system, First Edition KS ISO/TS 15874-7: 2003 Kenya Standard—Plastics piping systems for hot and cold water installations—Polypropylene (PP) Part 7: Guidance for the assessment of conformity, First Edition KS ISO 9999: 2007 Kenya Standard—Assistive products for persons with disability—Classification and terminology, First Edition KS ISO 9635-1: 2006 Kenya Standard—Agricultural irrigation equipment—Irrigation valves Part 1: General requirements, First Edition KS ISO 9635-2: 2006 Kenya Standard—Agricultural irrigation equipment—Irrigation valves Part 2: Isolating valves, First Edition KS ISO 9635-3: 2006 Kenya Standard—Agricultural irrigation equipment—Irrigation valves Part 3: Check valves, First Edition KS ISO 9635-4: 2006 Kenya Standard—Agricultural irrigation equipment—Irrigation valves Part 4: Air valves, First Edition KS ISO 9635-5: 2006 Kenya Standard—Agricultural irrigation equipment—Irrigation valves Part 5: Control valves, First Edition KS ISO 15077: 2008 Kenya Standard—Tractors and self- propelled machinery for agriculture— Operator controls—Actuating forces, displacement, location and method of operation, First Edition KS ISO 24347: 2005 Kenya Standard—Agricultural vehicles— Mechanical connections between towed and towing vehicles—Dimensions of ball-type coupling device (80 mm), First Edition KS ISO 26402: 2008 Kenya Standard—Agricultural vehicles— Steering systems for agricultural trailers— Interface for articulated steering device of semi mounted trailers, First Edition KS Boas 28923: 2007 Kenya Standard— Agricultural machinery—Guards for moving parts of power transmission—Guard opening with tool, First Edition KS ISO/TS 28924:2007 Kenya Standard—Agricultural machinery— Guards for moving parts of power transmission—Guard opening without tool, First Edition KS ISO 1129: 1980 Kenya Stanuard—Steel tubes for boilers, superheaters and heat exchangers— Dimension, tolerances and conventional masses per unit length, First Edition KS ISO 3500: 2005 Kenya Standard—Gas cylinders—Seamless steel CO2 cylinders for fixed fire-fighting installations on ships , First Edition KS ISO 14520-1: 2006 Kenya Standard —Gaseous fire-fighting systems —Physical properties and system design Part 1: General requirements, First Edition Electro technical. Kg ISO 226: 1987 Kenya Standard—Acoustics—Normal equal-loudness-level contours, First Edition KS ISO 266: 1997 Kenya Standard—Acoustics—Preferred frequencies, First Edition KS ISO 389-1: 1998 Kenya Standard — Acoustics— Reference zero for the calibration of audiometric equipment Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones, First Edition KS ISO 389-2: 1994 Kenya Standard—Acoustics—Reference zero for the calibration of audiometric equipment Part 2: Reference equivalent threshold sound pressure levels for pur tones +-- insert earphones, First Edition KS ISO 389-4:1994 Kenya Standard—Acoustics—Reference zero for the calibration of audiometric equipment Part 4: Reference levels for narrow-band masking noise, First Edition KS ISO 389-5:1998 Kenya Standard — Acoustics— Reference zero for the calibration of audiometric equipment Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz, First Edition KS ISO 389-7:1996 Kenya Standard—Acoustics— Reference zero for the calibration of audiometric equipment Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions, First Edition Kenya Standard—Single-use sterile rubber surgical gloves, First Edition KS ISO 21171:2006 Kenya Standard—Medical gloves— Determination of removable surface powder, First Edition KS ISO 22882: 2004 Kenya Standard—Castors and wheels— Requirements for castors for hospital beds, First Edition KS ISO 18153: 2003 Kenya Standard—In vitro diagnostic medical devices - Measurement of quantities in biological samples— Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials, First Edition KS ISO 7998: 2005 Kenya Standard—Ophthalmic optics - Spectacle frames - Lists of equivalent terms and vocabulary, First Edition KS ISO 18513 Kenya Standard—Tourism servicesHotels and other types of tourism accommodation- terminology, First Edition KS OHSAS 18001: 2007 Kenya Standard—Occupational health and safety management systems—Requirements, First Edition KS ISO 16069: 2004 Kenya Standard—Graphic symbols—Safety signs—Safety way guidance systems (SWGS), First Edition The following standards are hereby withdrawn forthwith KS 08-127:1979 Kenya Standard—Methods for the quantitative chemical analysis of binary fibre mixtures KS 08-441: 1983 Kenya Standard—Method for quantitative analysis of tertiary fibre mixtures KS 1524-2: 1999 Kenya Standard—Specification for gloves Part 2: Sterile surgical and examination gloves, First Edition KS 217: 1981 Kenya Standard—Specification • for unplasticized PVC pipes and fittings for buried drain and sewer KS 06-478-1: 1993 (Confirmed, 1999) Kenya Standard— Specification for polyethylene plastic pipes for water supply (low and high density) Part I: Requirements KS 06-478-2: 199 3 (Confirmed, 1999) Kenya Standard— Specification for polyethylene plastic (PE) pipes for water supply - (low and high density) Part 2: Test methods Dated the 27th October, 2008. KIOKO MANG'ELI, Secretary, National Standards Council. GAZETTE NOTICE. No. 11096 Services KS ISO 10282: 2002 21st November, 2008 THE KENYA GAZETTE 3011 THE COMPANIES ACT (Cap. 486) IN THE HIGH COURT OFKENYA AT NAIROBI (MILIMANI COMMERCIAL COURTS) MISCELLANEOUS CAUSE NO. 625 OF .2008 iN THE MATTER OF VIRANI (KENYA) LIMITED NOTICE NOTICE is given that a petition Dated the 18th August, 2008, was on the 8th September, 2008 presented to the High Court of Kenya at Nairobi, Milimani Commercial Courts (vide miscellaneous cause number 625 of 2008 aforequated)ior the confirmation of the reduction of the Capital of the above named Vimni (Kenya) Limited from Kenya Shillings Ten Million fl(Sh. 10,000.000.00) divided into 100.000 ordinary shares of Kenya Shillings One Hundred (Ksh. 100.00) each to Kenya Shillings Otie Hundred Thousand (KSh. 100,000.00) divided into 100,000 otdinary shares of Kenya Shillings One (KSh. 1.00) each . by returning paid up capital to the extent of Kenya Shillings Ninety Nine (KSh. 99.00) upon each of the issued 96,000 shares of Kenya Shillings Qne Hundred (Ksh. 100.00) each and by reducing the nominal amount of the, said 100,000 Ordinary Shares from Kenya Shillings One Hundred (Ksh. 100.00) to Kenya Shillings One (KSh. 1.00) each and which capital sought to be reduced is in excess of the wants of the above named Virani (Kemya) Limited. AND notice is further given that the said petition is directed to be heard on Thursday, the 18th December. 2008 at 9.00 o'clock in the forenoon, Or soon thereafter at the High Court of Kenya at Nairobi. Milimani Commercial Courts. ANY creditor or shareholder of the said company desiring to oppose the making of an order for the confirmation of the, said reduction of capital should appear at the time of hearing in Person or by counsel for that purpose. A copy of the said Petition will be furnished to any such person requiring the same by the under-mentioned advocates upon payment of the regulated charge for the same. Dated the 10th November, 2008. SHAH & SHAH, Advocates for Virani (Kenya) Limited.