GAZETTE NOTICE NO. 1440

PURSUANT to section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the Schedule hereto, to be Kenya Standards, with effect from the date of publication of this notice. Number Title of Specification or Code of Practice Chemical KS EAS 127-2:2023 Kenya Standard — Synthetic detergent powder — Specification — Part 2: Machine wash, Second Edition KS EAS 788:2023 Kenya Standard — Synthetic laundry detergent paste — Specification, Second Edition KS EAS 812:2023 Kenya Standard — Synthetic and combined (soap and synthetic) liquid hand wash — Specification, Second Edition KS EAS 815:2023 Kenya Standard — Soap noodles/chips — Specification, Second Edition KS EAS 816:2023 Kenya Standard — Synthetic liquid laundry detergent — Specification, Second Edition KS EAS 817:2023 Kenya Standard — Stain remover for tableware — Specification, Second Edition KS EAS 335:2023 Kenya Standard — Cologne, hydrosols and toilet waters — Specification, Third Edition KS EAS 339:2023 Kenya Standard — Hair creams, lotions and gels — Specification, Third Edition KS EAS 425-2:2023 Kenya Standard — Skin powders — Specification — Part 2: Baby powder, Third Edition KS EAS 1102:2023 Kenya Standard — Engine coolant — Specification, First Edition KS EAS 1103:2023 Kenya Standard — Base oil — Specification, First Edition KS EAS 1104:2023 Kenya Standard — Heavy fuel oils — Specification, First Edition KS EAS 789:2022 Kenya Standard — Alcohol based instant hand sanitizer — Specification, Second Edition KS EAS 791:2022 Kenya Standard — Kitchen equipment cleaner and grease remover — Specification, Second Edition KS EAS 792:2022 Kenya Standard — Carpet and upholstery shampoo — Specification (Second Edition KS EAS 793-1:2022 Kenya Standard — Toilet cleanser ― Specification ― Part 1: Acidic liquid, Second Edition KS EAS 794:2022 Kenya Standard — Determination of the microbial inhibition of cosmetic soap bars and liquid hand and body washes — Test method, Second Edition KS EAS 1051:2022 Kenya Standard — Two-pack epoxy solvent- based primer — Specification, First Edition KS EAS 1052:2022 Kenya Standard — Two-pack epoxy zinc phosphate weldable primer — Specification, First Edition KS EAS 1053:2022 Kenya Standard — Etch primers (single-pack and two-pack) — Specification, First Edition KS EAS 1054:2022 Kenya Standard — Black bituminous paint for cold application — Specification, First Edition KS EAS 1055:2022 Kenya Standard — Water based undercoat — Specification, First Edition KS EAS 122:2022 Kenya Standard — Sulfuric acid — Specification, Second Edition KS EAS 345:2022 Kenya Standard — Toluene — Specification, Second Edition KS EAS 384:2022, Kenya Standard Disinfectants and antiseptics — Vocabulary, Second Edition KS EAS 361:2022 Kenya Standard — Carbaryl dusting powder- Specification, Second Edition 406 406 KS ISO 14644-4:2022 Kenya Standard — Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up extrusion materials — Part 2: Preparation of test specimens and determination of properties, Second Edition KS ISO 17088:2021 Kenya Standard — Plastics — Organic recycling — Specifications for compostable plastics, Second Edition KS ISO 20200:2023 Kenya Standard — Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory- scale test, Second Edition KS ISO 1628-2:2020 Kenya Standard — Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly (vinyl chloride) resins extrusion materials — Part 2: Preparation of test specimens and determination of properties (indicate the edition) Second Edition KS ISO 16929:2021 Kenya Standard — Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot- scale test, Second Edition KS ISO 527-1:2019 Kenya Standard — Plastics — Determination of tensile properties — Part 1: General principles, Third Edition KS ISO 177:2016 Kenya Standard — Plastics — Determination of migration of plasticizers, Second Edition KS EAS 1082:2023 Kenya Standard — Toilet brush — Specification, First Edition KS EAS 1083:2023 Kenya Standard — Sweeping broom (push brush), First Edition KS EAS 1084:2023 Kenya Standard — Cobweb duster — Specification, First Edition KS EAS 1085:2023 Kenya Standard — Squeegee (rubber squeezer), First Edition KS EAS 1086:2023 Kenya Standard — Plastics — Codes for resin identification on plastic products, First Edition KS ISO 21305-1:2019 Kenya Standard — Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specification, First Edition KS ISO 21305-2:2019 Kenya Standard — Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties, First Edition KS ISO 1183 -1:2019 Kenya Standard — Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method, Second Edition KS ISO 1183-2:2019 Kenya Standard — Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method, Second Edition KS ISO 8655-5:2022 Kenya Standard — Piston-operated volumetric apparatus — Part 5: Dispensers, First Edition KS ISO 8655-6:2022 Kenya Standard — Piston-operated volumetric apparatus — Part 6: Gravimetric reference measurement procedure for the determination of volume, First Edition KS ISO8655-7:2022 Kenya Standard — Piston-operated volumetric apparatus — Part 7: Alternative measurement procedures for the determination of volume, First Edition KS ISO 8655-8:2022 Kenya Standard — Piston-operated volumetric apparatus — Part 8: Photometric reference measurement procedure for the determination of volume, First Edition KS ISO 8655-9:2022 Kenya Standard — Piston-operated volumetric apparatus — Part 9: Manually operated precision laboratory syringes, First Edition KS ISO 21067-1:2016 Kenya Standard — Packaging- Vocabulary — Part 1-General terms, Second Edition KS ISO 11418-1:2016 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 1: Drop- dispensing glass bottles, Second Edition KS ISO 11418-2:2016 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups, Second Edition KS ISO 11418-3:2016 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms, Second Edition KS ISO 11418-4:2005 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles, Second Edition KS ISO 16495:2022 Kenya Standard — Packaging — Transport packaging for dangerous goods — Test methods, Second Edition KS ISO 9198:2020 Kenya Standard — Paper, board, and pulps — Determination of water -soluble sulfates, Second Edition KS ISO 699:2015 Kenya Standard — Pulps— Determination of alkali resistance, Second Edition KS ISO 9197:2016 Kenya Standard — Paper, board, and pulps — Determination of water- soluble chlorides, Second Edition KS ISO 776:2011 Kenya Standard — Pulps — Determination of acid-insoluble ash, Second Edition KS ISO 12830:2019 Kenya Standard — Paper, board, pulps, and cellulose nanomaterials- Determination of acid- soluble magnesium, calcium, manganese, iron, copper, sodium, and potassium, Second Edition KS ISO 536:2019 Kenya Standard — Paper and board — Determination of grammage, Second Edition KS ISO 18889:2019 Kenya Standard — Protective gloves for pesticide operators and re-entry workers — Performance requirements, First Edition KS ISO 21067-2:2015 Kenya Standard — Packaging — Vocabulary — Part 2: Packaging and the environment terms, Second Edition KS ISO 4180:2019 Kenya Standard — Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules, Second Edition KS ISO 11418-5:2015 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies, Second Edition KS ISO 11418-7:2016 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 7: Screw neck vials made of glass tubing for liquid dosage forms, Second Edition KS ISO 12821:2019 Kenya Standard — Glass packaging — 26 H 180 crown finish — Dimensions, Second Edition Food KS EAS 1003:2021 Kenya Standard — Cashew butter — Specification, First Edition KS ISO 21033:2016 Kenya Standard — Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES), First Edition 9th February, 2024 THE KENYA GAZETTE KS ISO 27608:2010 Kenya Standard — Animal and vegetable fats and oils — Determination of Lovibond colour — Automatic method, First Edition KS ISO 27608:2010 Amd 1:2016 Kenya Standard — Animal and vegetable fats and oils — Determination of Lovibond colour — Automatic method, AMENDMENT 1 KS EAS 13:2023 Kenya Standard — Packaged mineral water — Specification, Fourth Edition Financial Services KS ISO 37444:2023 Kenya Standard — Electronic fee collection — Charging performance framework, First Edition KS ISO 11568:2023 Kenya Standard — Financial services — Key management (retail), First Edition KS ISO 19092:2023 Kenya Standard — Financial services — Biometrics — Security framework, Second Edition KS ISO 8000-117:2023 Kenya Standard — Data quality — Part 117: Application of ISO 8000-115 to identifiers in distributed ledgers including blockchains, First Edition KS ISO/TR 3242:2022 Kenya Standard — Blockchain and distributed ledger technologies — Use cases systems, First Edition KS ISO/TR24374:2023Kenya Standard — Financial services — Security information for PKI in block chain and DLT implementations, First Edition KS ISO/TR 23644:2023 Kenya Standard — Blockchain and distributed ledger technologies (DLTs) – Overview of trust anchors for DLT-based identity management, First Edition KS ISO/TR 6039:2023Kenya Standard — Kenya Standard — Blockchain and distributed ledger technologies – Identifiers of subjects and objects for the design of blockchain systems, First Edition KS ISO 19299:2020 Kenya Standard — Electronic fee collection — Security framework, First Edition KS ISO/TR 19639:2015 Kenya Standard — Electronic fee collection — Investigation of EFC standards for common payment schemes for multi-modal transport services, First Edition KS ISO 8583:2023 Kenya Standard — Kenya Standard — Financial-transaction-card-originated messages — Interchange message specifications, First Edition KS ISO/TS 23526:2023Kenya Standard — Security aspects for digital currencies, First Edition Leather and Textile KS 508:2023 Kenya Standard — Absorbent cotton wool — Specification, Fourth Edition KS 638:2023 Kenya Standard — Absorbent cotton gauze and gauze bandages-Specification, Fourth Edition KS ISO 18890:2018 Kenya Standard — Clothing — Standard method of garment measurement, First Edition KS ISO 12952-1:2010 Kenya Standard — Textiles — Assessment of the ignitability of bedding items — Part 1: Ignition source: smouldering cigarette, First Edition KS ISO 12952-2:2010Kenya Standard — Assessment of the ignitability of bedding items — Part 2: Ignition source: match-flame equivalent, First Edition KS ISO 21420:2020 Kenya Standard — Protective gloves — General requirements and test methods, First Edition KS ISO 21420:2020/Amd1:2022 Kenya Standard — Protective gloves — General requirements and test methods, AMENDMENT 1 KS ISO/TR 12116:2008 Kenya Standard — Textiles — Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests, First Edition KS ISO 12945-2:2020 Kenya Standard — Textiles — Determination of fabric propensity to surface pilling, fuzzing or matting — Part 2: Modified martindale method, First Edition KS ISO 12945-4:2020 Kenya Standard — Textiles — Determination of fabric propensity to surface pilling, fuzzing or matting — Part 4: Assessment of pilling, fuzzing and matting by visual analysis, First Edition KS ISO 7211-5:2020 Kenya Standard — Textiles — Methods for analysis of woven fabrics construction — Part 5: Determination of linear density of yarn removed from fabric, First Edition KS ISO 20158:2018 Kenya Standard — Textiles — Determination of water absorption time and water absorption capacity of textile fabrics, First Edition KS ISO 4484-1:2023 Kenya Standard — Textiles and textile products — Micro plastics from textile sources — Part 1: Determination of material loss from fabrics during washing, First Edition KS ISO 4484-3:2023 Kenya Standard — Textiles and textile products — Microplastics from textile sources — Part 3: Measurement of collected material mass released from textile end products by domestic washing method, First Edition KS ISO 14184-1:2011 Kenya Standard — Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction method), First Edition KS ISO 14184-2:2011 Kenya Standard — Textiles — Determination of formaldehyde — Part 2: Released formaldehyde (vapour absorption method), First Edition KS ISO 9073-1:2023 Kenya Standard — Nonwovens — Test methods — Part 1: Determination of mass per unit area, Second Edition KS ISO 12958-1:2020 Kenya Standard — Geotextiles and geotextile- related products — Determination of water flow capacity in their plane — Part 1: Index test, First Edition KS ISO 12958-2:2020 Kenya Standard — Geotextiles and geotextile- related products — Determination of water flow capacity in their plane — Part 2: Performance test, First Edition KS ISO 12960:2020 Kenya Standard — Geotextiles and geotextile- related products — Screening test methods for determining the resistance to acid and alkaline liquids, First Edition KS ISO 13438:2018 Kenya Standard — Geosynthetics — Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation, First Edition KS ISO 22182:2020 Kenya Standard — Geotextiles and geotextile- related products — Determination of index abrasion resistance characteristics under wet conditions for hydraulic applications, First Edition KS ISO 25619-1:2021Kenya Standard — Geosynthetics — Determination of compression behaviour — Part 1: Compressive creep properties, First Edition 408 408 KS ISO 25619-2:2015Kenya Standard — Geosynthetics — Determination of compression behaviour — Part 2: Determination of short-term compression behaviour, First Edition Agriculture KS EAS 58-2:2023 Kenya Standard — Compounded dog food — Specification — Part 2: Complementary food, First Edition KS EAS 1091:2023 Kenya Standard — Compounded cat food — Specification, First Edition KS EAS 1092:2023 Kenya Standard — Compounded rabbit feed — Specification, First Edition KS EAS 1093:2023 Kenya Standard — Compounded horse feed — Specification, First Edition KS EAS 1094:2023 Kenya Standard — Poultry feed premix — Specification, First Edition KS EAS 1095:2023 Kenya Standard — Dairy cattle feed premix — Specification, First Edition KS EAS 1096-1:2023 Kenya Standard — Hay as animal feed — Specification — Part 1: Grass hay, First Edition KS EAS 1096-2:2023 Kenya Standard — Hay as animal feed — Specification — Part 2: Legume hay, First Edition KS EAS 1097:2023 Kenya Standard — Cattle feedlot operations — Specification, First Edition KS EAS 888:2023 Kenya Standard — Raw, roasted, and fried groundnuts kernels — Specification, Second Edition KS EAS 889:2023 Kenya Standard — Groundnut kernels for oil extraction — Specification, Second Edition KS EAS 1006:2021 Kenya Standard — Sesame seed — Specification, First Edition KS EAS 1007:2021 Kenya Standard — Chia seed — Specification, First Edition KS ISO 11035:1994 Kenya Standard — Sensory analysis — Identification and selection of descriptors for establishing a sensory profile by a multidimensional approach, First Edition KS ISO 16657:2023 Kenya Standard — Sensory analysis — Apparatus — Olive oil tasting glass, Second Edition KS EAS 1035:2023 Kenya Standard — Banana seed — Requirements for certification, First Edition KS EAS 1101:2023 Kenya Standard — Cassava seed — Requirements for certification, First Edition KS EAS 128:2023 Kenya Standard — Milled rice — Specification, Fourth Edition KS EAS 327:2023 Kenya Standard — Barley for brewing — Specification, Second Edition KS EAS 738:2023 Kenya Standard — Fresh sweet cassava root — Specification, Second Edition KS EAS 771:2023 Kenya Standard — Fresh sweet potato — Specification, Second Edition KS EAS 775:2023 Kenya Standard — Production and handling ware potato tuber — Code of practice, Second Edition KS EAS 776:2023 Kenya Standard — Production and handling of fresh cassava root — Code of practice, Second Edition KS EAS 778:2023 Kenya Standard — Fresh bitter cassava root, Second Edition KS EAS 780:2012 Kenya Standard — Fresh cassava leaves — Specification, Second Edition Engineering KS ISO 1920-8:2009 Kenya Standard — Testing of concrete — Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory, First Edition KS ISO 1920-9:2009 Kenya Standard — Testing of concrete — Part 9: Determination of creep of concrete cylinders in compression,First edition KS ISO 1920-10:2010 Kenya Standard — Testing of concrete — Part 10: Determination of static modulus of elasticity in compression, First Edition KS ISO 1920-11:2013 Kenya Standard — Testing of concrete — Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion, First Edition KS ISO 1920-12:2015 Kenya Standard — Testing of concrete — Part 12: Determination of the carbonation resistance of concrete — Accelerated carbonation method, First Edition KS ISO 1920-13:2018 Kenya Standard — Testing of concrete — Part 13: Properties of fresh self-compacting concrete, First Edition KS ISO 1920-14:2019 Kenya Standard — Testing of concrete — Part 14: Setting time of concrete mixtures by resistance to penetration, First Edition KS ISO 24516-1:2016Kenya Standard — Guidelines for the management of assets of water supply and wastewater systems — Part 1: Drinking water distribution networks, First Edition KS ISO 24516-2:2019Kenya Standard — Guidelines for the management of assets of water supply and wastewater systems — Part 2: Waterworks, First Edition KS ISO 24516-3:2017Kenya Standard — Guidelines for the management of assets of water supply and wastewater systems — Part 3: Wastewater collection networks, First Edition KS ISO 24516-4:2019Kenya Standard — Guidelines for the management of assets of water supply and wastewater systems — Part 4: Wastewater treatment plants, sludge treatment facilities, pumping stations, retention and detention facilities, First Edition KS 2129-1:2023 Kenya Standard — Tile adhesive for marble, granite, ceramic and porcelain — Part 1: Requirements, assessment and verification of constancy of performance, classification and marking, Second Edition KS 2129-2:2023 Kenya Standard — Tile adhesive for marble, granite, ceramic and porcelain — Part 2: Test methods, Second Edition KS 1948:2023 Kenya Standard — Round strand galvanized steel wire ropes for shipping purposes — Specification, Second Edition KS ISO 4427-1:2019 Kenya Standard — Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General, Second Edition KS ISO 4427-2:2019 Kenya Standard — Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes, Second Edition KS ISO 4427-2:2019 Amd 1:2023 Kenya Standard - Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes, AMENDMENT 1 9th February, 2024 THE KENYA GAZETTE KS ISO 4427-3:2019 Kenya Standard — Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings, Second Edition KS ISO 4427-5:2019 Kenya Standard — Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system, Second Edition KS ISO 11922-1:2018 Kenya Standard — Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series, Second Edition KS ISO/TR 4191:2014 Kenya Standard — Plastics piping systems for water supply — Un-plasticized poly (vinyl chloride) (PVC-U) and oriented PVC-U (PVC- O) — Guidance for installation, Second Edition KS ISO 5894:2018 Kenya Standard — Ships and marine technology — Manholes with bolted covers, First Edition KS ISO 8469:2021 Kenya Standard — Small crafts — Non-fire- resistant fuel hoses, First Edition KS ISO 8099-1:2018 Kenya Standard — Small crafts- Waste systems — Part 1: Waste-water retention, First Edition KS ISO 8099-2:2020 Kenya Standard — Small crafts — Waste systems — Part 2: — Sewage treatment system, First Edition KS ISO 13590:2022 Kenya Standard — Small crafts — Personal watercraft — Construction and system installation requirements, First Edition Services KS ISO 14100:2022 Kenya Standard — Guidance on environmental criteria for projects, assets and activities to support the development of green finance, First Edition KS ISO 14055-1:2017 Kenya Standard — Environmental management — Guidelines for establishing good practices for combatting land degradation and desertification — Part 1: Good practices framework, First Edition KS ISO/TR 14055-2:2022Kenya Standard — Environmental management — Guidelines for establishing good practices for combatting land degradation and desertification — Part 2: Regional case studies, First Edition KS ISO 14083:2023 Kenya Standard — Greenhouse gases — Quantification and reporting of greenhouse gas emissions arising from transport chain operations, First Edition KS ISO 14093:2022 Kenya Standard — Mechanism for financing local adaptation to climate change — Performance-based climate resilience grants — Requirements and guidelines, First Edition KS ISO 14065:2020 Kenya Standard — General principles and requirements for bodies validating and verifying environmental information, First Edition KS IWA 42:2022 Kenya Standard — Net zero guidelines, First Edition KS ISO 14067:2018 Kenya Standard — Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification, First Edition ISO 14002-2:2023 Kenya Standard — Environmental management systems — Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area — Part 2: Water, First Edition KS ISO 17043:2023 Kenya Standard — Conformity assessment — General requirements for the competence of proficiency testing providers, Second Edition KS ISO 8124-1:2022 Kenya Standard — Safety of toys — Part 1: Safety aspects related to mechanical and physical properties, Sixth Edition KS ISO 31030:2021 Kenya Standard — Travel risk management — Guidance for organizations, First Edition KS ISO 44004:2021 Kenya Standard — Collaborative business relationship management — Guidelines for larger organizations seeking collaboration with Micro, Small and Medium sized Enterprises (MSMEs), First Edition KS ISO 18513:2021 Kenya Standard — Tourism services — Hotels and other types of tourism accommodation — Vocabulary, Second Edition KS ISO 22483:2020 Kenya Standard — Tourism and related services — Accommodation: Hotels — Service requirements, First Edition KS ISO/TR 12296:2012 Kenya Standard — Manual handling of patients in the healthcare sector, First Edition KS ISO 9241-394:2020Kenya Standard — Ergonomics of human- system interaction — Part 394: Ergonomic requirements for reducing undesirable biomedical effects of visually induced motion sickness during watching electronic images, First Edition KS ISO 26800:2011 Kenya Standard — Ergonomics — General approach, principles and concepts, First Edition KS ISO/TR 9241-610:2022 Kenya Standard — Ergonomics of human- system interaction — Part 610: Impact of light and lighting on users of interactive systems, First Edition KS ISO 45002:2023 Kenya Standard — Occupational Safety and Health management system — General guidelines for implementation of ISO 45001:2018, First Edition KS ISO 13849-1:2023 Kenya Standard — Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design, Fourth Edition KS ISO 7010:2019 Amd 7:2023 Kenya Standard — Graphical symbols — Safety colours and safety signs — Registered safety signs — AMENDMENT 7 KS ISO/TS 20559:2020 Kenya Standard — Graphical symbols – Safety colours and safety signs — Guidance for development and use of a safety signing system, First Edition KS ISO/TR 14121-2:2012Kenya Standard — Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods, Second Edition KS ISO 17420-1:2021 Kenya Standard — Respiratory protective devices — Performance requirements — Part 1: General, First Edition KS ISO 17420-4:2021Kenya Standard — Respiratory protective devices — Performance requirements — Part 4: Requirements for supplied breathable gas RPD, First Edition KS ISO/TS 16975-4:2022Kenya Standard — Respiratory protective devices — Selection, use and maintenance — Part 4: Selection and usage guideline for respiratory protective devices under pandemic/epidemic/outbreak of infectious respiratory diseases, First Edition KS ISO 16972:2020 Kenya Standard — Respiratory protective devices — Vocabulary and graphical symbols, Second Edition Electrotechnical and ICT 410 410 KS ISO/IEC 27005:2022Kenya Standard — Information security, cybersecurity, and privacy protection — Guidance on managing information security risks, Second Edition KS ISO/IEC 27013:2021Kenya Standard — Information security, cybersecurity, and privacy protection — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1, Second Edition KS ISO/IEC TS 27022:2021 Kenya Standard — Information technology — Guidance on information security management system processes, First Edition KS ISO/IEC 27032:2023Kenya Standard — Cybersecurity — Guidelines for internet security, Second Edition KS ISO/IEC 27035-1:2023 Kenya Standard — Information technology — Information security incident management — Part 1: Principles and process, Second Edition KS ISO/IEC 27035-2:2023 Kenya Standard — Information technology — Information security incident management — Part 2: Guidelines to plan and prepare for incident response, Second Edition KS ISO/IEC 27036-1:2021 Kenya Standard — Cybersecurity — Supplier relationships — Part 1: Overview and concepts, Second Edition KS ISO/IEC 27036-3:2023 Kenya Standard — Cybersecurity — Supplier relationships — Part 3: Guidelines for hardware, software, and services supply chain security, Second Edition KS ISO/IEC 27050-4:2021 Kenya Standard — Information technology — Electronic discovery — Part 4: Technical readiness, First Edition KS ISO/IEC TS 27110:2021Kenya Standard — Information technology, cybersecurity, and privacy protection — Cybersecurity framework development guidelines, First Edition KS ISO/IEC 27070:2021 Kenya Standard — Information technology — Security techniques — Requirements for establishing virtualized roots of trust, First Edition KS ISO/IEC 27071:2023 Kenya Standard — Cybersecurity — Security recommendations for establishing trusted connections between devices and services, First Edition KS ISO/IEC 27099:2022 Kenya Standard — Information technology — Public key infrastructure — Practices and policy framework, First Edition KS ISO/IEC 27551:2021 Kenya Standard — Information security, cybersecurity, and privacy protection — Requirements for attribute-based unlinkable entity authentication, First Edition KS ISO/IEC 27555:2021 Kenya Standard — Information security, cybersecurity, and privacy protection — Guidelines on personally identifiable information deletion, First Edition KS ISO/IEC 27556:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — User- centric privacy preferences management framework, First Edition. KS ISO/IEC 27557:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Application of ISO 31000:2018 for organizational privacy risk management, First Edition KS ISO/IEC 27559:2022 Kenya Standard — Information security, cybersecurity, and privacy protection – Privacy enhancing data de-identification framework, First Edition KS ISO/IEC TS 27560:2023 Kenya Standard — Privacy technologies — Consent record information structure, First Edition KS ISO/IEC TR 27563:2023 Kenya Standard — Security and privacy in artificial intelligence use cases — Best practices, First Edition KS ISO/IEC TS 27570:2021 Kenya Standard — Privacy protection — Privacy guidelines for smart cities, First Edition KS ISO/IEC 24392:2023 Kenya Standard — Cybersecurity — Security reference model for industrial internet platform (SRM- IIP), First Edition KS ISO/IEC 23837-1:2023 Kenya Standard — Information security — Security requirements, test and evaluation methods for quantum key distribution — Part 1: Requirements, First Edition KS ISO/IEC 29128-1:2023Kenya Standard — Information security, cybersecurity, and privacy protection — Verification of cryptographic protocols — Part 1: Framework, First Edition KS ISO/IEC 29134:2023Kenya Standard — Information technology — Security techniques — Guidelines for privacy impact assessment, First Edition KS ISO/IEC 29192-8:2022 Kenya Standard — Information security — Lightweight cryptography — Part 8: Authenticated encryption, First Edition KS ISO/IEC 9797-2:2021 Kenya Standard — Information security — Message authentication codes (MACs) — Part 2: Mechanisms using a dedicated hash-function, Second Edition KS ISO/IEC 11770-3:2021 Kenya Standard — Information security — Key management — Part 3: Mechanisms using asymmetric techniques, Second Edition KS ISO/IEC 11770-7:2021 Kenya Standard — Information security — Key management — Part 7: Cross-domain password-based authenticated key exchange, First Edition KS ISO/IEC 18014-2:2021 Kenya Standard — Information security — Time-stamping services — Part 2: Mechanisms producing independent tokens, Second Edition KS ISO/IEC 18033-1:2021 Kenya Standard — Information security — Encryption algorithms — Part 1: General, Second Edition KS ISO/IEC 23264-1:2021 Kenya Standard — Information security — Redaction of authentic data — Part 1: General, First Edition KS ISO/IEC TS 23532-1:2021 Kenya Standard — Information security, cybersecurity, and privacy protection — Requirements for the competence of IT security testing and evaluation laboratories — Part 1: Evaluation for ISO/IEC 15408, First Edition KS ISO/IEC TS 23532-2:2021 Kenya Standard — Information security, cybersecurity, and privacy protection — Requirements for the competence of IT security testing and evaluation laboratories — Part 2: Testing for ISO/IEC 19790, First Edition KS ISO/IEC 4922-1:2023 Kenya Standard — Information security — Secure multiparty computation — Part 1: General, First Edition KS ISO/IEC 15408-1:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Evaluation criteria for IT security — Part 1: Introduction and general model, First Edition KS ISO/IEC 15408-2:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Evaluation criteria for IT security — Part 2: Security functional components, First Edition 9th February, 2024 THE KENYA GAZETTE KS ISO/IEC 15408-3:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Evaluation criteria for IT security — Part 3: Security assurance components, First Edition KS ISO/IEC 15408-4:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Evaluation criteria for IT security — Part 4: Framework for the specification of evaluation methods and activities, First Edition KS ISO/IEC 15408-5:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Evaluation criteria for IT security — Part 5: Pre- defined packages of security requirements, First Edition KS ISO/IEC 15946-5:2022 Kenya Standard — Information security — Cryptographic techniques based on elliptic curves — Part 5: Elliptic curve generation, Second Edition KS ISO/IEC 18033-7:2022 Kenya Standard — Information security — Encryption algorithms — Part 7: Tweakable block ciphers, First Edition KS ISO/IEC 18045:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Evaluation criteria for IT security — Methodology for IT security evaluation, Second Edition KS ISO/IEC 20009-3:2022 Kenya Standard — Information security — Anonymous entity authentication — Part 3: Mechanisms based on blind signatures, First Edition KS ISO/IEC 20897-2:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Physically unclonable functions — Part 2: Test and evaluation methods, First Edition KS ISO/IEC TR 24485:2022 Kenya Standard — Information security, cybersecurity, and privacy protection — Security techniques — Security properties and best practices for test and evaluation of white box cryptography, First Edition KS ISO/IEC 19944-1:2020 Kenya Standard — Cloud computing and distributed platforms ─ Data flow, data categories and data use Part 1: Fundamentals, Second Edition KS IEC 61850-8-1:2020Kenya Standard — Communication networks and systems for power utility automation — Part 8-1: Specific communication service mapping (SCSM) — Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802- 3, First Edition KS IEC 61850-8-2:2018 Kenya Standard — Communication networks and systems for power utility automation — Part 8-2: Specific communication service mapping (SCSM) — Mapping to Extensible Messaging Presence Protocol (XMPP), First Edition KS IEC 61850-9-2:2020 Kenya Standard — Communication networks and systems for power utility automation — Part 9-2: Specific communication service mapping (SCSM) — Sampled values over ISO/IEC 8802-3, First Edition KS IEC/IEEE 61850-9-3:2016Kenya Standard — Communication networks and systems for power utility automation — Part 9-3: Precision time protocol profile for power utility automation, First Edition KS IEC 61850-10:2012 Kenya Standard — Communication networks and systems for power utility automation — Part 10: Conformance testing, First Edition KS IEC/TR 61850-10-3:2022 Kenya Standard — Communication networks and systems for power utility automation — Part 10-3: Functional testing of IEC 61850 systems, First Edition KS IEC/TS 61850-80-1:2016 Kenya Standard — Communication networks and systems for power utility automation — Part 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5- 104, First Edition KS IEC/TR 61850-80-3:2015 Kenya Standard — Communication networks and systems for power utility automation — Part 80-3: Mapping to web protocols — Requirements and technical choices, First Edition KS IEC/TS 61850-80-4:2016 Kenya Standard — Communication networks and systems for power utility automation — Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model, First Edition KS IEC 60296:2020 Kenya Standard — Fluids for electrotechnical applications — Mineral insulating oils for electrical equipment, Second Edition KS IEC 60034-5:2020 Kenya Standard — Rotating electrical machines — Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) — Classification, Second Edition KS IEC 60034-7:2020 Kenya Standard — Rotating electrical machines — Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code), Second Edition KS IEC 62055-41:2018 Kenya Standard — Electricity metering — Payment systems — Part 41: Standard transfer specification (STS) — Application layer protocol for one-way token carrier systems, Second Edition KS IEC 62093:2022 Kenya Standard — Photovoltaic system power conversion equipment — Design qualification and type approval, Second Edition KS ISO 50006:2023 Kenya Standard — Energy management systems — Evaluating energy performance using energy performance indicators and energy baselines, Second Edition KS ISO 6469-1:2019 Amd 1:2022 Kenya Standard — Electrically propelled road vehicles — Safety specifications — Part 1: Rechargeable energy storage system (RESS), AMENDMENT 1 KS ISO 6469-2:2022 Kenya Standard — Electrically propelled road vehicles — Safety specifications — Part 2: Vehicle operational safety, Second Edition KS ISO 6469-3:2021 Kenya Standard — Electrically propelled road vehicles — Safety specifications — Part 3: Electrical safety, Second Edition KS IEC 60060-1:2010 Kenya Standard — High-voltage test techniques — Part 1: General definitions and test requirements, First Edition KS IEC 60060-2:2010 Kenya Standard — High-voltage test techniques — Part 2: Measuring systems, First Edition KS IEC 60060-3:2006 Kenya Standard — High-voltage test techniques — Part 3: Definitions and requirements for on-site testing, First Edition KS IEC/TS 61936-0:2023 Kenya Standard — Power installations exceeding 1 kV AC and 1,5 kV DC — Part 0: Principles to be observed in the design and erection of high voltage installations - Safety of high voltage installations, First Edition 412 412 KS IEC 61936-2:2023 Kenya Standard — Power installations exceeding 1 kV AC and 1,5 kV DC — Part 2: DC, First Edition KS IEC 61083-1:2021 Kenya Standard — Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests, First Edition KS IEC 61083-2:2013 Kenya Standard — Instruments and software used for measurement in high-voltage and high- current tests — Part 2: Requirements for software for tests with impulse voltages and currents, First Edition KS IEC 61083-3:2020 Kenya Standard — Instruments and software used for measurement in high-voltage and high- current tests — Part 3: Requirements for hardware for tests with alternating and direct voltages and currents, First Edition KS IEC 61326-1:2020 Kenya Standard — Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 1: General requirements, First Edition KS IEC 61326-2-1:2020 Kenya Standard — Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-1: Particular requirements — Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications, First Edition KS IEC 61326-2-2:2020 Kenya Standard — Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-2: Particular requirements — Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems, First Edition KS IEC 61326-2-4:2020 Kenya Standard — Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-4: Particular requirements — Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9, First Edition KS IEC 60688:2021 Kenya Standard — Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals, First Edition KS ISO 17640:2018 Kenya Standard — Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment, Second Edition KS ISO 3452-1:2021 Kenya Standard — Non-destructive testing — Penetrant testing — Part 1: General principles, Second Edition KS ISO 3452-2:2021 Kenya Standard — Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials, Second Edition KS ISO 23243:2020 Kenya Standard — Non-destructive testing — Ultrasonic testing with arrays — Vocabulary, First Edition KS ISO 12749-6:2020 Kenya Standard — Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 6: Nuclear medicine, First Edition KS ISO 19443:2018 Kenya Standard — Quality management systems — Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS), First Edition KS ISO 4064-1:2014 Kenya Standard — Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements, First Edition KS ISO 4064-2:2014 Kenya Standard — Water meters for cold potable water and hot water — Part 2: Test methods, First Edition KS ISO 4064-3:2014 Kenya Standard — Water meters for cold potable water and hot water — Part 3: Test report format, First Edition KS ISO 4064-4:2014 Kenya Standard — Water meters for cold potable water and hot water — Part 4: Non- metrological requirements not covered in ISO 4064-1, First Edition KS ISO 4064-5:2014 Kenya Standard — Water meters for cold potable water and hot water — Part 5: Installation requirements, First Edition KS IEC 61672-1:2013 Kenya Standard — Electroacoustics — Sound level meters — Part 1: Specifications, First Edition KS IEC 61672-2:2013 Kenya Standard — Electroacoustics — Sound level meters — Part 2: Pattern evaluation tests, First Edition KS ISO 2922:2020 Kenya Standard — Measurement of airborne sound emitted by vessels on inland waterways and harbours, First Edition KS ISO 3381:2021 Kenya Standard — Railway applications — Acoustics — Noise measurement inside rail bound vehicles, First Edition KS ISO/IEC/IEEE 23026:2023Kenya Standard — Systems and software engineering — Engineering and management of websites for systems, software and services information, First Edition KS ISO/IEC 24773-3:2021 Kenya Standard — Software and systems engineering — Certification of software and systems engineering professionals — Part 3: Systems engineering, First Edition KS ISO/IEC 24773-4:2023 Kenya Standard — Software and systems engineering — Certification of software and systems engineering professionals — Part 4: Software engineering, First Edition KS ISO/IEC/IEEE 42010:2022 Kenya Standard — Software, systems and enterprise — Architecture description, First Edition KS ISO/IEC 25059:2023 Kenya Standard — Software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality model for AI systems, First Edition KS ISO/IEC 30105-8:2022 Kenya Standard — Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 8: Continual performance improvement (CPI) of ITES-BPO, First Edition KS ISO/IEC 30105-3:2016/Amd 1:2020 Kenya Standard — Information technology — IT Enabled Services- Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 3: Measurement framework (MF) and organization maturity model (OMM) — AMENDMENT 1 The following standards are confirmed forthwith; Chemical KS 2791:2019 Kenya Standard — Painting of buildings — Code of practice KS EAS 926:2019 Kenya Standard — Varnishes for interior surfaces — Specification 9th February, 2024 THE KENYA GAZETTE KS EAS 927:2019 Kenya Standard — Road marking paints — Specification KS EAS 928-1:2019 Kenya Standard — Hot applied thermoplastic road marking paint — Specification — Part 1: Constituent material and mixtures KS EAS 928-2:2019 Kenya Standard — Hot applied thermoplastic road marking paint — Specification — Part 2: Road performance KS EAS 929:2019 Kenya Standard — Solvent-based paint remover — Specification KS EAS 848:2016 Amd 1:2019 Kenya Standard — Water-thinned priming paints for wood — Specification, AMENDMENT 1 KS EAS 849:2016 Amd 1:2019 Kenya Standard — Silk (sheen) emulsion paint for interior use — Specification, AMENDMENT 1 KS EAS 850:2016 Amd 1:2019 Kenya Standard — Matt solvent- borne paint for interior and exterior use — Specification, AMENDMENT 1 KS EAS 851:2016 Amd 1:2019 Kenya Standard — Matt emulsion paint for interior and exterior use — Specification, AMENDMENT 1 KS EAS 852:2016 Amd 1:2019 Kenya Standard — Air-dried roofing paint — Specification, AMENDMENT 1 KS EAS 853-1:2016 Amd 1:2019 Kenya Standard — Auto-refinishing paint — Specification — Part 1: Synthetic resin based, AMENDMENT 1 KS EAS 853-2:2016 Amd 1:2019 Kenya Standard — Auto-refinishing paint — Specification — Part 2: Nitrocellulose resin based, AMENDMENT 1 KS EAS 856:2016 Amd 1:2019 Kenya Standard — 2-Pack acrylic resin-based auto-refinishing paint — Specification, AMENDMENT 1 KS 928:1997 Kenya Standard ─ Glossary of terms relating to disinfectants KS 1290-1:1999 Kenya Standard — Specification for bleaching agents — Part 1: Sodium hypochlorite solutions KS 1290-3:1999 Kenya Standard — Specification for bleaching agents — Part 3: Chlorinated lime bleaching powder for water treatment KS 1290-2:1999 Kenya Standard — Specification for bleaching agents — Part 2: Sodium hypochlorite solution for water treatment KS ISO 12757-2:1998 Kenya Standard — Ball point pens and refills — Part 2: Documentary use KS ISO 14145-1:2017 Kenya Standard — Roller ball pens and refills — Part 1: General use KS 422:2001 Kenya Standard — Specification for exercise books KS 2121:2008 Kenya Standard — Fountain pen — Specification KS 397:1997 Kenya Standard — Specification for graphite for black lead pencil KS 1025: 2003 Kenya Standard — Metre rules and rulers for schools and office use — Specification KS 397:1997 Kenya Standard — Specification for graphite for black lead pencil KS 90:2006 Kenya Standard — Black lead pencil — Specification KS 2042:2013 Kenya Standard — Wax crayons for drawing — Specification KS 1993: 2014 Kenya Standard — Marking pens for text highlighting — Specification KS 89:2015 Kenya Standard — Specification for school chalks KS ISO 12757-1:2017 Kenya Standard — Ball point pens and refills — Part 1: General use KS ISO 14145-2:1998 Kenya Standard — Roller ball pens and refills — Part 2: Documentary use (DOC) KS ISO 27668-1:2017 Kenya Standard — Gel ink ball pens and refills — Part 1: General use KS ISO 12756:19 Kenya Standard — Drawing and writing instruments ball point pens and roller ball pens — Vocabulary KS 2359:2012 Kenya Standard — Polystyrene (crystal and high impact) for its safe use in contact with foodstuffs, pharmaceuticals and drinking water — Specification KS 2360:2012 Kenya Standard — Positive list of constituents of polyalkylene tetrephthalates (pet and pbt) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water KS 2361:2012 Kenya Standard — Positive list of constituents of polystyrene (crystal and high impact) in contact with foodstuffs, pharmaceuticals and drinking water KS 2387:2012 Kenya Standard — Polyyalkylene terephthalates (PET and PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water — Specification KS ISO 8256:2004 Kenya Standard — Plastics — Determination of tensile-impact strength KS ISO 20200:2015 Kenya Standard — Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test KS ISO 14855-1:2012 Kenya Standard — Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved KS ISO 14855-2:2018 Kenya Standard — Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test KS 1710:2001 Kenya Standard — Glossary of terms relating to vitreous enamelware and ceramic — Metal systems KS 1749:2002 Kenya Standard — Bar coding terminology KS 25:2008 Kenya Standard — Matches — Specification KS 1100:2010 Kenya Standard — Scouring pads — Specification KS 156:1980 Kenya Standard — Specification for caustic soda, pure and technical KS 2273:2011 Kenya Standard — Steelwool — Specification KS 2294:2011 Kenya Standard — Aluminium foil — Specification KS 2437:2013 Kenya Standard — Stretch cling film — Specification KS 2519:2014 Kenya Standard — Shoe brush — Specification KS 2607:2015 Kenya Standard — Baby feeding bottles — Specification KS 1024-1:2010 Kenya Standard — Vitreous china water closet pans — Specification — Part 1: Vitreous china washdown water closet pans 414 414 KS 1024-2:2010 Kenya Standard — Vitreous china water closet pans — Specification — Part 2: Vitreous china squatting washdown water closet pans KS ISO 10523:2008 Kenya Standard — Water quality — Determination of pH KS 85:2007 Kenya Standard — Chemicals used for treatment of water intended for human consumption — Aluminium sulphate — Specification KS ISO 5667-11:2009 Kenya Standard — Water quality — Sampling — Part 11: Guidance on sampling of groundwaters KS ISO 5667-12:2017 Kenya Standard — Water quality — Sampling — Part 12: Guidance on sampling of bottom Sediments KS ISO 5667-13:2011 Kenya Standard — Water quality — Sampling — Part 13: Guidance on sampling of sludges KS ISO 5667-14:2014 Kenya Standard — Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling KS ISO 5667-15:2009 Kenya Standard — Water quality — Sampling — Part 15: Guidance on preservation and handling of sludge and sediment samples KS ISO 5667-16:2017 Kenya Standard — Water quality — Sampling — Part 16: Guidance on biotesting of samples KS ISO 5667-17:2008 Kenya Standard — Water quality — Sampling — Part 17: Guidance on sampling of bulk suspended solids KS 1290-4:2007 Kenya Standard — Chemical used for treatment of water intended for human consumption — Part 4: Calcium hypochlorite KS ISO 3696:1987 Kenya Standard — Water for analytical laboratory use — Specification and test methods KS ISO 15705:2002 Kenya Standard — Water quality — Determination of the chemical oxygen demand index (ST-COD) — Small-scale sealed-tube method KS 1924:2007 Kenya Standard — Chemicals used for treatment of water intended for human consumption — Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulphate — Specification KS 1923:2007 Kenya Standard — Application of liquid polyaluminium-based coagulants in potable water treatment — Guidelines KS 2159:2008 Kenya Standard — Chemicals used for treatment of water intended for human consumption — Chlorine dioxide — Specification KS 2158:2008 Kenya Standard — Chemicals used for treatment of water intended for human consumption — Liquefied chlorine gas — Specification KS 2161:2008 Kenya Standard — Products used for treatment of water intended for human consumption — Bone charcoal KS 2407:2012 Kenya Standard — Swimming pools water — Quality tolerances KS ISO 14644-9:2012 Kenya Standard — Cleanrooms and associated controlled environment — Part 9: Classification of surface cleanness by particle concentration KS ISO 14644 12:2018 Kenya Standard — Cleanrooms and associated controlled environment — Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration KS EAS 290-3:2002 Kenya Standard — Polishes — Specification Part 3: Floor polish water emulsion buffable type KS EAS 290-2:2002 Kenya Standard — Polishes — Specification ⎯ Part 2: Floor polish solvent type (liquid and paste) KS EAS 462:2007 Kenya Standard — Shoe polish wax solvent paste type — Specification KS 807-4:2010 Kenya Standard — Floor polish, water emulsion self shining type KS 807-5:2010 Kenya Standard — Floor polish pigmented paste type KS 807-6:2010 Kenya Standard — Automobile polish, wax- solvent paste type KS 807-7:2010 Kenya Standard — Wooden furniture polish paste KS 807-8:2010 Kenya Standard — Automobile polish — Liquid KS EAS 326:2002 Kenya Standard — Copper/chromium/arsenic composition for the preservation of timber — Specification KS EAS 345:2004 Kenya Standard — Toluene — Specification KS EAS 122:1999 Kenya Standard — Sulphuric acid — Specification KS EAS 216:1999 Kenya Standard — Ethanol for industrial use — Methods of test — Part 11: Test for detection of furfural. KS EAS 324:2002 Kenya Standard — Copper / chromium / arsenic compositions for the preservation of timber — Method for timber treatment KS 2351:2019 Kenya Standard — Surgical spirit — Specification KS 2838:2019 Kenya Standard — Denatured technical alcohol for use as cooking and appliance fuel — Specification KS 87:2019 Kenya Standard — Hydrochloric acid — Specification KS 2450:2013 Kenya Standard — Tripod stand — Specification KS 2837:2019 Kenya Standard — Glass jars — Specification KS ISO 9359:1989 Kenya Standard — Air quality — Stratified sampling method for assessment of ambient air quality KS ISO 17179:2016 Kenya Standard — Stationary source emissions — Determination of the mass concentration of ammonia in flue gas — Performance characteristics of automated measuring systems KS ISO 17733: 2015 Kenya Standard — Workplace air — Determination of mercury and inorganic mercury compounds — Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry KS ISO 18158: 2016 Kenya Standard — Workplace air — Terminology KS ISO 18466: 2016 Kenya Standard — Stationary source emissions — Determination of the biogenic fraction in CO2 in stack gas using the balance method KS ISO 20581: 2016 Kenya Standard — Workplace air — General requirements for the performance of procedures for the measurement of chemical agents 9th February, 2024 THE KENYA GAZETTE KS ISO 4221:1980 Kenya Standard — Air quality — Determination of a mass concentration of sulphur dioxide in ambient air — Thorin spectrophotometric method KS ISO 7934:1989 Kenya Standard — Stationary source emissions — Determination of the mass concentration of sulphur dioxide — Hydrogen peroxide/barium perchlorate — Thorin method KS EAS 751:2010 Kenya Standard — Air quality — Specification KS EAS 752:2010 Kenya Standard — Air quality — Tolerance limits of emissions discharged to the air by factories KS ISO 4219:1979 Kenya Standard — Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment KS ISO 4220:1983 Kenya Standard — Ambient air — Determination of a gaseous acid air pollution index — Titrimetric method with indicator or potentiometric end point detection KS ISO 8760:1990 Kenya Standard — Workplace air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication KS ISO 8761:1989 Kenya Standard — Workplace air — Determination of mass concentration of nitrogen dioxide — Method using detector tubes for short-term sampling with direct indication KS ISO 13752:1998 Kenya Standard — Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference KS ISO 14956:2002 Kenya Standard — Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty KS ISO 16362:2005 Kenya Standard — Ambient air — Determination of particle phase polycyclic aromatic hydrocarbons by high performance liquid chromatography KS ISO 10498:2004 Kenya Standard — Ambient air — Determination of sulfur dioxide — Ultraviolet fluorescence method KS ISO 11222:2002 Kenya Standard — Air quality — Determination of the uncertainty of the time average of air quality measurements KS ISO 20988:2007 Kenya Standard — Air quality — Guidelines for estimating measurement uncertainty KS ISO 16107:2007 Kenya Standard — Workplace atmospheres — Protocol for evaluating the performance of diffusive samplers. KS ISO 16000-1:2004 Kenya Standard — Indoor air — Part 1: General aspects of sampling strategy KS ISO 16000-5:2007 Kenya Standard — Indoor air — Part 5: Sampling strategy for volatile organic compounds (VOCs) KS ISO 7168-2:1999 Kenya Standard — Air quality — Exchange of data — Part 2: Condensed data format KS EAS 750.2010 Kenya Standard — Air quality — Emissions to the air by cement factories guidelines KS EAS 751:2010 Kenya Standard — Air quality — Specification KS EAS 752:2010 Kenya Standard — Air quality —Tolerance limits of emissions discharged to the air by factories KS ISO 21438-3:2010 Kenya Standard — Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides KS ISO 9486:1991 Kenya Standard — Workplace air — Determination of vaporous chlorinated hydrocarbons — Charcoal tube/solvent desorption/gas chromatographic method KS ISO 9487:1991 Kenya Standard — Workplace air — Determination of vaporous aromatic hydrocarbons — Charcoal tube/solvent desorption / gas chromatographic method KS ISO 4219:1979 Kenya Standard — Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment KS ISO 8756:1994 Kenya Standard — Air quality — Handling of temperature, pressure and humidity data KS ISO 10313:1993 Kenya Standard — Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method KS ISO 21438-2:2009 Kenya Standard — Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) KS ISO 11564:1998 Kenya Standard — Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Naphthylethylenediamine photometric method KS ISO 10780:1994 Kenya Standard — Stationary Source emissions — Measurement of velocity and volume flowrate of gas streams in ducts KS ISO 12141:2002 Kenya Standard — Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric KS ISO 11338-1:2003 Kenya Standard — Stationary source emissions — Determination of gas and particle-phase polycyclic aromatic hydrocarbons — Part 1: Sampling method KS ISO 11338-2:2003 Kenya Standard — Stationary source emissions — Determination of gas and particle- phase polycyclic aromatic hydrocarbons — Part 2: Sample preparation, clean-up and determination KS ISO 11041:1996 Kenya Standard — Workplace air — Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour — Method by hydride generation and atomic absorption spectrometry KS ISO 11632:1998 Kenya Standard — Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method KS ISO 12039:2019 Kenya Standard — Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characteristics of automated measuring systems KS ISO 15202-3:2004 Kenya Standard — Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Anal KS ISO 14164:1999 Kenya Standard — Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method KS ISO 16200-1:2001 Kenya Standard — Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography — Part 1: Pumped sampling method 416 416 KS ISO 17734-1:2006 Kenya Standard — Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 1: Isocyanates using dibutylamine derivatives KS ISO 16740:2005 Kenya Standard — Workplace air — Determination of hexavalent chromium in airborne particulate matter — Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide KS ISO 16702:2007 Kenya Standard — Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography KS ISO 16200-2:2000 Kenya Standard — Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography — Part 2: Diffusive sampling method KS ISO 16622:2002 Kenya Standard — Meteorology — Sonic anemometers/thermometers — Acceptance test methods for mean wind measurements. KS ISO 14965:2000 Kenya Standard — Air quality — Determination of total non-methane organic compounds — Cryogenic preconcentration and direct flame ionization detection method KS ISO 20552:2007 Kenya Standard — Workplace air — Determination of mercury vapour — Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry KS ISO 10498:2004 Kenya Standard — Ambient air — Determination of sulfur dioxide — Ultraviolet fluorescence method KS ISO 12884:2000 Kenya Standard — Ambient air — Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses KS ISO 16362:2005 Kenya Standard — Ambient air — Determination of particlephase polycyclic aromatic hydrocarbons by high performance liquid chromatography KS ISO 14956:2002 Kenya Standard — Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty KS ISO 13752:1998 Kenya Standard — Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference KS ISO 20988:2007 Kenya Standard — Air quality — Guidelines for estimating measurement uncertainty KS ISO 11222:2002 Kenya Standard — Air quality — Determination of the uncertainty of the time average of air quality measurements KS ISO 16000-11:2006 Kenya Standard — Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens KS ISO 16000-10:2006 Kenya Standard — Indoor air — Part 10: Determination of the emission of volatile organic compounds from building products and furnishing -Emission test cell method KS ISO 16000-8:2007 Kenya Standard — Indoor air — Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions KS ISO 16000-9:2006 Kenya Standard — Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing— Emission test chamber method KS ISO 16017-2:2003 Kenya Standard — Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption/capillary gas chromatography — Part 2: Diffusive sampling KS ISO 16017-1:2000 Kenya Standard — Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling KS ISO 15713:2006 Kenya Standard — Stationary source emissions — Sampling and determination of gaseous fluoride content KS ISO 16000-2:2004 Kenya Standard — Indoor air — Part 2: Sampling strategy for formaldehyde KS ISO 13964:1998 Kenya Standard — Determination of ozone in ambient air — Ultraviolet photometric method KS ISO 10473:2000 Kenya Standard — Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method KS ISO 8186:1989 Kenya Standard — Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method KS ISO 7996:1985 Kenya Standard — Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method KS ISO 6767:1990 Kenya Standard — Ambient air — Determination of the mass concentration of sulfur dioxide — tetrachloromercurate (TCM)/pararosaniline method KS ISO 7708:1995 Kenya Standard — Air quality — Partied size fraction definitions for health-related sampling KS ISO 4224:2000 Kenya Standard — Ambient air — Determination of carbon monoxide — Non- dispersive infrared spectrometry method KS ISO 10397:1993 Kenya Standard — Stationary Source emissions — Determination of asbestos plant emissions — Method by fibre count measurement KS ISO 10155:1995 Kenya Standard — Stationary Source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications KS ISO 4178:1980 Kenya Standard — Complete filled transport packages — Distribution trails information to be recorded KS ISO 7023:1983 Kenya Standard — Packaging sacks — Method of sampling empty sacks for testing — Part 1: Paper sacks KS ISO 2248:1985 Kenya Standard — Packaging — Complete filled transport packages — Vertical impact test by dropping KS ISO 2876:1985 Kenya Standard — Packaging — Complete filled transport packages and unit loads — Rolling test KS ISO 8474:1986 Kenya Standard — Packaging — Complete filled transport packages — Water immersion test KS ISO 8768:1987 Kenya Standard — Packaging — Complete filled transport packages — Toppling test 9th February, 2024 THE KENYA GAZETTE KS ISO 6590-2:1986 Kenya Standard — Packaging sacks — Vocabulary and types — Part 2: Sacks made from thermoplastic flexible film KS ISO 6591-1:1984 Kenya Standard — Packaging sacks — Description and method of measurements — Part 1: Empty paper sacks KS ISO 6591-2:1985 Kenya Standard — Packaging sacks — Description and method of measurements — Part 2: Empty sacks made from thermoplastic flexible film KS ISO 6599-1:1983 Kenya Standard — Packaging sacks — Conditioning for testing — Part 1: Paper sacks KS ISO 8351-2:1994 Kenya Standard — Packaging — Method of specification for sacks — Part 2: Sacks made from thermoplastic flexible film KS ISO 8367-1:1993 Kenya Standard — Packaging — Dimensional tolerances for general purpose sacks — Part 1: Paper sacks KS ISO 8367-2:1993 Kenya Standard — Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film KS ISO 15119:2000 Kenya Standard — Packaging sacks — Determination of the friction of filled sacks KS ISO 2233:2000 Kenya Standard — Packaging — Complete filled transport packages and unit loads — Conditioning for testing KS ISO 2234:2000 Kenya Standard — Packaging — Complete filled transport packages — Stacking tests using static load KS ISO 2244:2000 Kenya Standard — Packaging — Complete filled transport packages — Horizontal impact tests horizontal or inclined plane test — Pendulum test KS ISO 2247:2000 Kenya Standard — Packaging — Complete filled transport packages — Vibration test at fixed low frequency KS ISO 2873:2000 Kenya Standard — Packaging — Complete filled transport packages and unit loads — Low pressure test KS ISO 2875:2000 Kenya Standard — Packaging — Complete filled transport packages and unit loads — Water spray test KS ISO 8318:2000 Kenya Standard — Packaging — Complete filled transport packages and unit loads — Sinusoidal vibration test using a variable frequency KS 1706-1:2001 Kenya Standard — Glossary of packaging terms — Part 1: General including auxiliary materials KS 1706-2:2001 Kenya Standard — Glossary of packaging terms — Part 2: Paper and board packaging KS 2482:2013 Kenya Standard — Packaging — Products manufactured from corrugated or solid fibreboard — Types and construction KS 575:2013 Kenya Standard — Corrugated fibreboard boxes — Specification KS EAS 859:2017 Kenya Standard — Paper bags — Specification KS ISO 18601:2013 Kenya Standard — Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment KS ISO 18603:2013 Kenya Standard — Packaging and the environment — Reuse KS ISO 18604:2013 Kenya Standard — Packaging and the environment — Material recycling KS ISO 18605:2013 Kenya Standard — Packaging and the environment — Energy recovery KS ISO 18606:2013 Kenya Standard — Packaging and the environment — Organic recycling KS ISO 3035:2011 Kenya Standard — Corrugated fibreboard — Determination of flat crush resistance KS ISO 3676:2012 Kenya Standard — Packaging — Complete filled transport packages and unit loads — Unit load dimensions KS ISO 780:2015 Kenya Standard — Packaging distribution — Packaging graphical symbols for handling and storage of packages KS ISO 18616-2:2016 Kenya Standard — Transport packaging — Reusable rigid plastic distribution boxes — Part 2: General specifications for testing KS ISO 2206:1987 Kenya Standard — Packaging — Complete filled transport packages — Identification of parts when testing KS ISO 11897:1999 Kenya Standard — Packaging — Sacks made from thermoplastic flexible film — Tear propagation on edge folds KS ISO 90-1:1997 Kenya Standard — Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 1: Open-top cans KS EAS 879:2018 Kenya Standard — Aluminium cans for beverages — Specification KS EAS 880:2018 Kenya Standard — Waxed paper for packaging of confectionery — Specification KS EAS 881:2018 Kenya Standard — Packaging — Flexible tubes — Determination of the air tightness of closures — Test method KS EAS 882:2018 Kenya Standard — Packaging — Flexible carrier bags — Specification KS EAS 884:2018 Kenya Standard — Packaging — Flexible tubes — Determination of puncture resistance — Test method KS EAS 886:2018 Kenya Standard — Packaging — Flexible packaging material — Determination of residual solvents by headspace gas chromatography — Test method KS 2874:2019 Kenya Standard — Portable rigid plastic hermetic grain silo — Specification KS EAS 930:2019 Kenya Standard — Paper and board food contact packaging material — Specification KS EAS 931:2019 Kenya Standard — Packaging ancillary materials — Code of practice — Desiccants KS EAS 934:2019 Kenya Standard — Packaging — Flexible laminate tubes — Test method to assess the strength of the side seam KS EAS 935:2019 Kenya Standard — Packaging — Code of practice — Glass containers KS EAS 857:2017 Kenya Standard — Carbon paper — Specification KS EAS 858:2017 Kenya Standard — Base paper for carbon paper — Specification KS EAS 862:2017 Kenya Standard — Facial tissue paper — Specification KS EAS 863:2017 Kenya Standard — Paper and board cut size for general purpose — Specification KS EAS 865:2017 Kenya Standard — Corrugated fibre board boxes for general packaging — Specification 418 418 KS EAS 867:2017 Kenya Standard — Waxed paper for bread wrap — Specification KS EAS 868:2017 Kenya Standard — Natural and extensible sack kraft paper — Specification KS EAS 869:2017 Kenya Standard — Wrapping paper — Specification KS EAS 860:2017 Kenya Standard — Base paper for waxed bread wrap — Specification KS EAS 864:2017 Kenya Standard — Photocopy paper — Specification KS EAS 866:2017 Kenya Standard — Paper sacks for packaging of cement — Specification KS 24-5:2003 Kenya Standard — Tissue paper and tissue products — Part 5: Determination of wet tensile strength KS 2242-2:2010 Kenya Standard — Particleboards specification — Part 2: Requirements for general purpose boards for use in dry conditions KS 2567:2014 Kenya Standard — Paper towel rolls for centre feed dispensing devices — Specification KS 2586:2016 Kenya Standard — Jumbo tissue roll plus size toilet paper — Specification KS 2618:2016 Kenya Standard — Commercial stationery books — Specification KS 23:1976 Kenya Standard — Specification for mailing envelopes KS 2663:2017 Kenya Standard — Paper kitchen towel — Specification KS 2664:2017 Kenya Standard — Toilet paper in sheet form interfolded toilet paper — Specification KS 2665:2017 Kenya Standard — Medical tissue paper towel — Specification KS 2669:2017 Kenya Standard — Paper hand towel sheets folded hand towels — Specification KS 389:1984 Kenya Standard — Specification for waxed paper for bread wrap KS 5:1976 Kenya Standard — Glossary of terms used in paper industry and trade KS 603:2002 Kenya Standard — Specification for files and folders KS 605:1987 Kenya Standard — Specification for duplicating papers KS 948:1999 Kenya Standard — Specification for corrugated fibreboard boxes for export of horticultural produce KS EAS 355:2017 Kenya Standard — Toilet paper — Specification KS EAS 859:2017 Kenya Standard — Paper bags — Specification KS ISO 11093-1:1994 Kenya Standard — Specification for paper and board testing of cores — Part 1: Sampling KS ISO 11093-2:1994 Kenya Standard — Specification for paper and board testing of cores — Part 2: Conditioning of test samples KS ISO 11093-3:1994 Kenya Standard — Specification for paper and board testing of cores — Part 3: Determination of moisture content using the oven drying method KS ISO 11093-6:2005 Kenya Standard — Paper and board testing of cores — Part 6: Determination of bending strength by the three-point method KS ISO 14487:1997 Kenya Standard — Pulps — Standard water for physical testing KS ISO 4046-1:2016 Kenya Standard — Paper board pulps and related terms — Vocabulary — Part 1: Alphabetical index KS ISO 4046-2:2016 Kenya Standard — Paper board pulps and related terms — Vocabulary — Part 2: Pulping terminology KS ISO 4046-3:2016 Kenya Standard — Paper board pulps and related terms — Vocabulary — Part 3: Paper making terminology KS ISO 4046-4:2016 Kenya Standard — Paper board pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products KS ISO 4046-5:2016 Kenya Standard — Paper board pulps and related terms — Vocabulary — Part 5: Properties of Pulp Paper and Board KS ISO 4119:1995 Kenya Standard — Pulps — Determination of stock concentration KS 582:1987 Kenya Standard — Specification for paperboards for packaging KS 2790:2018 Kenya Standard — Paper used for maps and architectural drawings —Specification KS 604:2018 Kenya Standard — Stencil papers — Specification KS ISO 15318:1999 Kenya Standard — Pulp, paper and board — Determination of 7 specified polychlorinated biphenyls (PCB) KS ISO 15360-1:2000 Kenya Standard — Recycled pulps — Estimation of stickies and plastics — Part 1: Visual method KS ISO 22414:2004 Kenya Standard — Paper — Cut-size office paper — Measurement of edge quality KS ISO 23713:2005 Kenya Standard — Pulps — Determination of fibre coarseness by automated optical analysis — Polarized light method KS EAS 933:2019 Kenya Standard — Paper and board intended to come into contact with foodstuffs — Determination of formaldehyde in an aqueous extract KS EAS 932:2019 Kenya Standard — Paper plates and cups for food packaging — Specification KS 421:2018 Kenya Standard — Specification for newsprint Food KS 2829:2019 Kenya Standard — Food animals’ welfare — Code of practice KS 2830:2019 Kenya Standard — Marinated meat — Specification KS 2831:2019 Kenya Standard — Deep fried meat — Specification KS 2844:2019 Kenya Standard — Fresh coarsely ground meat products — Specification KS 2845:2019 Kenya Standard — Fermented sausages (salami) — Specification KS 2829:2019 Kenya Standard — Food animals’ welfare — Code of practice KS ISO 3509:2005 Kenya Standard — Coffee and coffee products — Vocabulary KS EAS 130:1999 Kenya Standard — Green coffee bean — Specification KS ISO 20481:2008 Kenya Standard — Coffee — Determination of caffeine content (Reference method) 9th February, 2024 THE KENYA GAZETTE KS ISO/TR 12591:2013 Kenya Standard — White tea — Specification KS ISO 7513:1990 Kenya Standard — Instant tea in solid form — Determination of moisture content (loss in mass at 103 degrees C) KS ISO 14502-1:2005 Cor 1:2006 Kenya Standard — Determination of substances characteristic of green and black tea — Part 1: Content of total polyphenols in tea — Colorimetric method using Folin-Ciocalteu reagent, CORRIGEDUM 1 KS ISO 14502-2:2005 Cor 1:2006 Kenya Standard — Determination of substances characteristic of green and black tea — Part 2: Content of catechins in green tea — Method using high-performance liquid chromatography, CORRIGEDUM 1 KS EAS 28:2019 Kenya Standard — Black tea — Specification KS EAS: 921:2019 Kenya Standard — Green tea — Definition and basic requirements KS EAS 922:2019 Kenya Standard — Flavoured black tea — Specification KS EAS 923:2019 Kenya Standard — Instant tea — Specification KS 998:2019 Kenya Standard — Chocolates ― Specification KS 2862:2019 Kenya Standard — Cocoa butter ― Specification KS ISO 2292:2017 Kenya Standard — Cocoa beans — Sampling Financial Services KS ISO/TR 21941:2017 Kenya Standard — Financial services — Third-party payment service providers KS ISO/TR 14742:2010 Kenya Standard — Financial services — Recommendations on cryptographic algorithms and their use KS ISO 22222:2005 Kenya Standard — Personal financial planning — Requirements for personal financial planners KS ISO 21188:2018 Kenya Standard — Public key infrastructure for financial services - Practices and policy framework KS ARS 1651:2018 Kenya Standard — Good Financial Grant Practice — Requirements KS 2318:2011 Kenya Standard — Security screening of individuals employed in a security environment — Code of practice KS ISO 9144:1991 Kenya Standard — Securities — Optical Character recognition line — Position and structure KS ISO 20022-7:2013 Kenya Standard — Financial services — Universal financial industry message scheme — Part 7: Registration KS ISO 20022-8:2013 Kenya Standard — Financial services — Universal financial industry message scheme — Part 8: ASN.1 generation KS ISO 20275:2017 Kenya Standard — Financial services — Entity legal forms (ELF) Leather and Textile KS EAS 156-2:2000 Kenya Standard — Woven bags made from natural fibres for milled products — Specification KS ISO 105-J02:1997 Kenya Standard — Textiles — Tests for colour fastness — Part J02: Instrumental assessment of relative whiteness KS ISO 105-Z01:1993 Kenya Standard — Textiles — Tests for colour fastness — Part Z01: Colour fastness to metals in the dye-bath: Chromium salts KS ISO 105-Z02:1993 Kenya Standard — Textiles — Tests for colour fastness — Part Z02: Colour fastness to metals in the dye-bath: Iron and copper KS ISO 105-Z03:1996 Kenya Standard — Textiles — Tests for colour fastness — Part Z03: Intercompatibility of basic dyes for acrylic fibres KS ISO 105-Z04:1995 Kenya Standard — Tests for colour fastness — Part Z04: Dispersibility of disperse dyes KS ISO 105-Z05:1996 Kenya Standard — Textiles — Tests for colour fastness — Part Z05: Determination of the dusting behaviour of dyes KS ISO 105-Z06:1998 Kenya Standard — Textiles — Tests for colour fastness — Part Z06: Evaluation of dye and pigment migration KS 2857:2019 Kenya Standard — Cotton industry — Code of practice KS 2858:2019 Kenya Standard — Sisal industry — Code of practice KS 2174:2019 Kenya Standard — Measurement of physical properties of raw cotton by cotton classification instruments — Standard test methods KS ISO 18074:2015 Kenya Standard — Textiles — Identification of some animal fibres by DNA analysis method — Cashmere, wool, yak and their blends KS ISO 18103:2015 Kenya Standard — Superfine woven wool fabric labelling — Requirements for Super S code definition KS ISO 18254-1:2016 Kenya Standard — Textiles — Method for the detection and determination of alkylphenol ethoxylates (APEO) — Part 1: Method using HPLC-MS KS ISO 1130:1975 Kenya Standard — Textile fibres — Some methods of sampling for testing Agriculture KS 2841:2019 Kenya Standard — Arrowroot (Taro) crisps — Specification KS 2842:2019 Kenya Standard — Fresh arrowroot (Taro) — Specification KS 2843:2019 Kenya Standard — Production and handling of arrowroots (Taro) — Code of practice KS 2859:2019 Kenya Standard — Sweet potato bread — Specification KS 2860:2019 Kenya Standard — Sweet potato puree — Specification KS 2861:2019 Kenya Standard — Production and handling of sweet potatoes — Code of practice KS EAS 128:2017 Kenya Standard — Milled rice — Specification Services KS ISO/IEC17023:2013 Kenya Standard — Conformity assessment — Guidelines for determining the duration of management system certification audits KS ISO/IEC 17065:2012 Kenya Standard — Conformity assessment — Requirements for bodies certifying products, processes and services KS ISO/IEC17021-4:2013 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management systems KS ISO 7730:2005 Kenya Standard — Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using 420 420 calculation of the PMV and PPD indices and local thermal comfort criteria KS ISO 10075-3:2004 Kenya Standard — Ergonomic principles related to mental workload — Part 3: Principles and requirements concerning methods for measuring and assessing mental workload KS ISO 17724:2003 Kenya Standard — Graphical symbols — Vocabulary KS ISO 15534-1:2000 Kenya Standard — Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery KS ISO 15534-2:2000 Kenya Standard — Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings KS ISO 9355-2:1999 Kenya Standard — Ergonomic requirements for the design of displays and control actuators — Part 2: Displays KS ISO 10075-2:1996 Kenya Standard — Ergonomic principles related to mental workload — Part 2: Design principles KS ISO 11428:1996 Kenya Standard — Ergonomics - Visual danger signals — General requirements, design and testing KS ISO 10075:1991 Kenya Standard — Ergonomic principles related to mental work-load — General terms and definitions KS ISO 15535:2012 Kenya Standard — General requirements for establishing anthropometric databases KS ISO 17398:2004 Kenya Standard — Safety colours and safety signs — Classification, performance and durability of signs KS ISO 22727:2007 Kenya Standard — Graphical symbols — Creation and design of public information symbols — Requirements KS 2867:2019 Kenya Standard — Occupational safety and health — Demolition of buildings — Code of practice KS ISO 45001:2018 Kenya Standard — Occupational health and safety management systems — Requirements with guidance for use, First Edition KS ISO 17776:2016 Kenya Standard — Petroleum and natural gas industries — Offshore production installations — Major accident hazard management during the design of new installations KS ISO 13702:2015 Kenya Standard — Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines KS ISO 15544:2000 Kenya Standard — Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response KS ISO 15544:2000/Amd 1:2009 Kenya Standard — Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response, AMENDMENT 1 KS ISO 13857:2008 Kenya Standard — Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs KS ISO 10418:2019 Kenya Standard — Petroleum and natural gas industries — Offshore production installations — Process safety systems KS ISO 13577-1:2016 Kenya Standard — Industrial furnaces and associated processing equipment — Safety — Part 1: General requirements KS ISO 13577-2:2014 Kenya Standard — Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems KS ISO 7250-1:2017 Kenya Standard — Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks Electrotechnical and ICT KS ISO/IEC TR 29154:2013 Kenya Standard — Software engineering guide for the application of ISO IEC 24773 2008 Certification of software engineering professionals comparison framework KS ISO/IEC 33001:2015 Kenya Standard — Information technology — Process assessment — Concepts and terminology KS ISO/IEC 25000:2014 Kenya Standard — Software engineering — Systems and Software Quality Requirements and Evaluation (SQuaRE) — Guide to SQuaRE KS ISO/IEC TS 25011:2017 Kenya Standard — Software engineering — Systems and Software Quality Requirements and Evaluation (SQuaRE) — Service quality models KS ISO/IEC 25012:2008 Kenya Standard — Software engineering — Systems and Software Quality Requirements and Evaluation (SQuaRE) — Data Quality Model KS ISO/IEC 19788-3:2011 Kenya Standard — Information processing systems — Vocabulary Part 3: Equipment technology KS 2847-1:2019 Kenya Standard — Software engineering — Antivirus — Fundamental principles and vocabulary KS 2847-2:2019 Kenya Standard — Software engineering — Antivirus — Protection against targeted attacks KS 2847-3:2019 Kenya Standard — Software engineering — Antivirus — Sampling KS 2847-4:2019 Kenya Standard — Software engineering — Antivirus — Test methods KS 2794:2018 Kenya Standard — Information technology — Learning, education and training — Quality management and quality assurance in eLearning — Code of practice KS ISO/IEC 19788-1:2011 Kenya Standard — Information technology — Learning, education and training – Metadata for learning resources — Part 1: Framework KS ISO/IEC 19788-5:2012 Kenya Standard — Information technology — Learning, education and training – Metadata for learning resources — Part 5: Educational elements KS ISO/IEC 24751-1:2008 Kenya Standard — Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 1: Framework and reference model KS ISO/IEC 24751-2:2008 Kenya Standard — Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 2: Access for all” personal needs and preferences for digital delivery KS ISO/IEC 24751-3:2008 Kenya Standard — Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 3: Access for all” digital resource description KS ISO/IEC 19788-2:2011 Kenya Standard — Information technology — Learning, education and training 9th February, 2024 THE KENYA GAZETTE — Metadata for learning resources — Part 2: Dublin core elements KS ISO/IEC 19788-2:2011 Amd 1:2016 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources — Part 2: Dublin core elements, AMENDMENT 1 KS ISO/IEC 19788-5:2012 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources — Part 5: Educational elements KS ISO/IEC 19788-1:2011 Amd 1:2014 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources — Part 1: Framework KS OIML R 22:1975 Kenya Standard — Alcoholometry “International alcoholometric tables’’ KS OIML R 35-1:2007 Kenya Standard — Material measures of length for general use — Part 1: Metrological and technical requirements KS OIML R 50-1:2014 Kenya Standard — Continuous totalizing automatic weighing instruments (belt weighers) — Part 1: Metrological and technical requirements — Tests KS OIML R 50-2:2014 Kenya Standard — Continuous totalizing automatic weighing instruments (belt weighers) — Part 2: Metrological controls and performance tests KS OIML R 50-3:2014 Kenya Standard — Continuous totalizing automatic weighing instruments (belt weighers) — Part 3: Test report format KS OIML R 76-1:2006 Kenya Standard — Non-automatic weighing instruments — Part 1: Metrological and technical requirements – Tests KS OIML R 76-2:2007 Kenya Standard — Non-automatic weighing instruments — Part 2: Test report format KS OIML R 61-1:2017 Kenya Standard — Automatic gravimetric filling instruments — Part 1: Metrological and technical requirements KS OIML R 61-2:2017 Kenya Standard — Automatic gravimetric filling instruments — Part 2: Test method KS OIML R 61-3:2017 Kenya Standard — Automatic gravimetric filling instruments — Part 3: Report format for type evaluation KS OIML R 134-1:2006 Kenya Standard — Automatic instruments for weighing road vehicles in motion and measuring axle loads — Part 1: metrological and technical requirements — Tests KS OIML R 134-2:2009 Kenya Standard — Automatic instruments for weighing road vehicles in motion and measuring axle loads — Part 2: Test report format KS OIML R 85-1 & 2:2008 Kenya Standard — Automatic level gauges for measuring the level of liquid in stationary storage tanks Part 1: Metrological and technical requirements — Tests — Part 2: Test report format KS OIML R 85-3:2008 Kenya Standard — Automatic level gauges for measuring the level of liquid in fixed storage tanks — Part 3: Report format for type evaluation KS OIML R 47:1979 Kenya Standard — Standard weights for testing of high capacity weighing machines KS OIML R 66:1985 Kenya Standard — Length measuring instruments KS OIML R 111-1:2004 Kenya Standard — Weights of Classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3 Part 1: Metrological and technical requirements KS OIML R 111-2:2004 Kenya Standard — Weights of Classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3 Part 2: Test report format KS OIML R 92:1989 Kenya Standard — Wood-moisture meters — Verification methods and equipment: General provisions KS OIML R133:2002 Kenya Standard — Liquid-in-glass thermometers KS OIML R 23:1975 Kenya Standard — Tyre pressure gauges for motor vehicles KS OIML R 52:2004 Kenya Standard — Hexagonal weights — Metrological and technical requirements KS OIML R 55:1981 Kenya Standard — Speedometers, mechanical odometers and chronotachographs for motor vehicles — Metrological regulations KS OIML R 88:1998 Kenya Standard — Integrating-averaging sound level meters KS OIML R 91:1990 Kenya Standard — Radar equipment for the measurement of the speed of vehicles KS OIML R 130:2001 Kenya Standard — Octave-band and one-third-octave-band filters KS OIML R 102:1992 Kenya Standard — Sound calibrators KS OIML R 44:1985 Kenya Standard — Alcoholometers and alcohol hydrometers and thermometers for use in alcoholometry KS ISO 17638:2016 Kenya Standard — Non-destructive testing of welds — Magnetic particle testing KS ISO 3452-3:2013 Kenya Standard — Non-destructive testing — Penetrant testing Part 3: Reference test blocks (pending revision) KS ISO 3452-4:1998 Kenya Standard — Non-destructive testing — Penetrant testing Part 4: Equipment KS ISO 3452-5:2008 Kenya Standard — Non-destructive testing — Penetrant testing Part 5: Penetrant testing at temperatures higher than 50 degrees C KS ISO 3452-6:2008 Kenya Standard — Non-destructive testing — Penetrant testing Part 6: Penetrant testing at temperatures lower than 10 degrees C KS ISO 18490:2015 Kenya Standard — Non-destructive testing — Evaluation of vision acuity of NDT personnel KS ISO 11699-1:2008 Kenya Standard — Non-destructive testing — Industrial radiographic film Part 1: Classification of film systems for industrial radiography KS ISO 11699-2:2018 Kenya Standard — Non-destructive testing — Industrial radiographic films Part 2: Control of film processing by means of reference values (pending revision) KS ISO 5579:2013 Kenya Standard — Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules The following standards are withdrawn forthwith; Chemical KS EAS 127-2:2013 Kenya Standard — Synthetic detergent powder — Specification; to be replaced by KS EAS 127-2:2013 KS EAS 812:2014 Kenya Standard — Synthetic and combined (soap and synthetic) liquid hand wash ― Specification; to be replaced by KS EAS 812:2023 422 422 KS EAS 812:2014 Kenya Standard — Synthetic and combined (soap and synthetic) liquid hand wash ― Specification; to be replaced by KS EAS 812:2023 KSEAS 815:2014 Kenya Standard — Soap noodles/chips — Specification; to be replaced by KS EAS 815:2023 KS EAS 816:2014 Kenya Standard — Synthetic liquid laundry detergent — Specification; to be replaced by KS EAS 816:2023 KS EAS 817:2014 Kenya Standard — Stain remover for tableware — Specification; to be replaced by KS EAS 817:2023 KS EAS 335:2013 Kenya Standard — Cologne, hydrosols and toilet waters — Specification; to be replaced by KS EAS 335:2023 KS EAS 339:2013 Kenya Standard — Hair creams, lotions and gels — Specification; to be replaced by KS EAS 339:2023 KS EAS 425-2:2017 Kenya Standard — Skin powders — Specification — Part 2: Baby powder; to be replaced by KS EAS 425-2: 2023 KS EAS 789:2013 Kenya Standard — Alcohol based instant hand sanitizer — Specification; to be replaced by KS EAS 789:2022 KS EAS 791:2013 Kenya Standard — Kitchen equipment cleaner and grease remover — Specification; to be replaced by KS EAS 791:2022 KS EAS 792:2013 Kenya Standard — Carpet and upholstery shampoo — Specification; to be replaced by KS EAS 792:2022 KS EAS 793-1:2013 Kenya Standard — Toilet cleanser ― Specification ― Part 1: Acidic liquid to be replaced with KS EAS 793-1:2022 KS EAS 794:2013 Kenya Standard — Determination of the microbial inhibition of cosmetic soap bars and liquid hand and body washes — Test method; to be replaced by KS EAS 794:2022 KS EAS 122:1999 Kenya Standard — Sulfuric acid — Specification; to be replaced by KS EAS 122:2022 KS EAS 345:2004 Kenya Standard — Toluene — Specification; to be replaced by KS EAS 345:2022 KS EAS 384:2005 Kenya Standard — Disinfectants — Glossary of terms; to be replaced by KS EAS 384:2022 KS EAS 361:2004 Kenya Standard — Carbaryl dusting powder — Specification; to be replaced by KS EAS 361:2022 KPAS 2950:2022 Kenya Standard — Cosmetics — Petroleum jelly for cosmetic use; to be replaced by KS EAS 126:2022 KS ISO 14644-4:2001 Kenya Standard — Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up; to be replaced by KS ISO 14644-4:2022 KS ISO 17088:2012 Kenya Standard — Plastics — Organic recycling — Specifications for compostable plastics; to be replaced by ISO 17088:2021 KS ISO 20200:2015 Kenya Standard — Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory- scale test; to be replaced by KS ISO 20200:2023 KS ISO 1628-2:1998 Kenya Standard — Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly (vinyl chloride) resins; to be replaced by KS ISO 1628-2:2021 KS ISO16929:2013 Kenya Standard — Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot- scale test; to be replaced by KS ISO 16929:2021 KS ISO 527-1:2012 Kenya Standard — Plastics — Determination of tensile properties — Part 1: General principles; to be replaced by KS ISO 527-1:2019 KS ISO 177:1988 Kenya Standard — Plastics — Determination of migration of plasticizers; to be replaced by KS ISO 177:2016 KS ISO 7391-1:2006 Kenya Standard — Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications; to be replaced by KS ISO 21305- 1:2019 KS ISO 7391-2:2006 Kenya Standard — Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties; to be replaced by KS ISO 21305-2:2019 KS ISO 1183-1:2012 Kenya Standard — Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method; to be replaced by KS ISO1183-1:2019 KS ISO 1183-2:2004 Kenya Standard — Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method; to be replaced by KS ISO 1183-2:2019 KS 807-2:2010 Kenya Standard — Polishes — Specification — Part 2: Floor polish solvent type (Liquid and Paste); to be replaced by KS EAS 290-2:2002 KS 807-3:1996 Kenya Standard — Specification for polishes — Part 3: Floor polish water emulsion buffable type; to be replaced by KS EAS 290-3:2002 KS ISO 11418-1:1996 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 1: Drop- dispensing glass bottles; to be replaced by KS ISO 11418-1:2016 KS ISO 11418-2:1996 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups; to be replaced by KS ISO 11418-2:2016 KS ISO 11418-3-1996 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms; to be replaced by KS ISO 11418-3:2016 KS ISO 11418-4:1996 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles; to be replaced by KS ISO 11418-4:2005 KS ISO 16495:2013 Kenya Standard — Packaging — Transport packaging for dangerous goods — Test methods; to be replaced by KS ISO 16495:2022 KS ISO 9198: 2001 Kenya Standard — Paper, board, and pulps — Determination of water-soluble sulfates, to be replaced by KS ISO 9198:2020 KS ISO 699:1982 Kenya Standard — Pulps — Determination of alkali resistance; to be replaced by KS ISO 699:2015 KS ISO 9197:1998 Kenya Standard — Paper, board, and pulps — Determination of water-soluble chlorides; to be replaced by KS ISO 9197:2016 9th February, 2024 THE KENYA GAZETTE KS ISO 776:1982 Kenya Standard — Pulps — Determination of acid-insoluble ash; to be replaced by KS ISO 776:2011 KS ISO 12830:1982 Kenya Standard — Paper, board, pulps, and cellulose nanomaterials — Determination of acid- soluble magnesium, calcium, manganese, iron, copper, sodium, and potassium; replaced with KS ISO 12830:2019 KS ISO 536:1995 Kenya Standard — Paper and board — Determination of grammage; to be replaced by KS ISO 536:2019 KS ISO 21067:2007 Kenya Standard — Packaging — Vocabulary — Part 1:General terms; to be replaced by KS ISO 21067-1:2016 and KS ISO 21067-2:2015 KS ISO 4180-1:1980 Kenya Standard — Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules; to be replaced by KS ISO 4180:2019 KS ISO 4180-2:1980 Kenya Standard — Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules; to be replaced by KS ISO 4180:2019 KS ISO 11418-5:1997 Kenya Standard — Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies; to be replaced by KS ISO 11418-5:2015 KS ISO 11418-7:1998 Kenya Standard — Containers and Accessories for Pharmaceutical Preparations— Part 7: Screw neck vials made of glass tubing for liquid dosage forms; to be replaced by KS ISO 11418- 7:2016 KS ISO 12821:2013 Kenya Standard — Glass packaging — 26 H 180 crown finish — Dimensions; to be replaced by KS ISO 12821:2019 Food KS CODEX STAN 26:1981 Kenya Standard — Codex standard for edible sesame seed oil, to be replaced by KS EAS 333:2023 KS 436-1:2013 Kenya Standard -Cocoa powder — Specification — Part 1: Unsweetened cocoa powder, to be replaced by KS EAS 1031:2021 KS 436-2:2019 Kenya Standard — Cocoa powder — Specification — Part 2: Cocoa-sugar mixtures, to be replaced by KS EAS 1031:2021 KS ISO 8294:1994 Kenya Standard — Animal and vegetable fats and oils — Determination of copper, iron and nickel contents, to be replaced by KS ISO 21033:2016 KS 459-9:1996 Kenya Standard — Code of hygienic practice for collecting, processing and labelling of natural mineral water, mineral water and bottled drinking water, to be replaced by KS EAS 13:2023 and KS EAS 153:2018 KS 459-1:2007 Kenya Standard — Requirements for drinking water, to be replaced by KS EAS 12:2018 and KS EAS 153:2018 KSEAS 13:2018 Kenya Standard — Packaged mineral water — Specification, to be replaced by KS EAS 13:2023 Financial Services KS ISO 19092:2008 Kenya Standard — Financial services — Biometrics — Security framework, to be replaced by KS ISO 19092:2023 KS ISO 11568-1:2005 Kenya Standard — Banking — Key management (retail) — Part 1: Principles/Banking and other related financial services, to be replaced by KS ISO 11568:2023 KS ISO 11568-2: 2012 Kenya Standard — Banking — Key management (retail) — Part 2: Key management techniques for symmetric ciphers, to be replaced by KS ISO 11568:2023 KS ISO 9992-1:1990 Kenya Standard — Financial transaction cards — Messages between the integrated circuit card and the card accepting device — Part 1: Concepts and structures, withdraw without replacement, scope has been covered by KS ISO 8583:2023 KS ISO 9992-2:2011 Kenya Standard — Financial transaction cards — Messages between the integrated circuit card and the card accepting device — Part 2: Functions, messages (commands and responses), data elements and structures, withdraw without replacement, scope has been covered by KS ISO 8583:2023 KS ISO 10126-2:1991 Kenya Standard — Banking — Procedures for message encipherment (wholesale) — Part 2: DEA algorithm, withdraw without replacement KS ISO 7982-1:1998 Kenya Standard — Bank telecommunication — Funds transfer messages — Part 1: Vocabulary and universal set of data segments and data elements for electronic funds transfer messages, withdraw without replacement. scope of this standard has been sufficiently covered by KS ISO 20022 series KS ISO 10126-2:1991 Kenya Standard — Banking — Procedures for message encipherment (wholesale) — Part 2: DEA algorithm, withdraw without replacement. scope has been sufficiently covered by KS ISO 20022 series KS ISO/TS 19299:2015 Kenya Standard — Electronic fee collection — Security framework, to be replaced by KS ISO 19299:2020 KS ISO 8583-1:2003 Kenya Standard — Financial transaction card originated messages — Interchange message specifications — Part 1: Messages, data elements and code values, to be replaced by KS ISO 8583:2023 KS ISO 8583-2:1998 Kenya Standard — Financial transaction card originated messages — Interchange message specifications — Part 2: Application and registration procedures for Institution Identification Codes (IIC), to be replaced by KS ISO 8583:2023 KS ISO 8583-3:2003 Kenya Standard — Financial transaction card originated messages — Interchange message specifications — Part 3: Maintenance procedures for messages, data elements and code values, to be replaced by KS ISO 8583:2023 KS ISO 15782-1:2009 Kenya Standard — Certificate management for financial services — Part 1: Public key certificates, to be replaced by KS ISO 21188:2018 Leather and Textile KS 508:2009 Kenya Standard — Absorbent cotton wool for medical use — Specification, to be replaced by KS 508:2023 KS 638:2018 Kenya Standard — Absorbent cotton gauze — Specification, to be replaced by KS 638:2023 KS 639-1:1989 Kenya Standard — Specification for bandages — Part 1: Cotton gauze bandages, to be replaced by KS 638:2023 KS ISO 9073-1:1989 Kenya Standard — Textiles-Test methods for nonwovens — Part 1: Determination of mass per unit area, to be replaced by KS ISO 9073- 1:2023 424 424 KS ISO 12958:1999 Kenya Standard — Geotextiles and geotextile- related products — Determination of water flow capacity in their plane, to be replaced by KS ISO 12958-1:2020 Geotextiles and geotextile- related products — Determination of water flow capacity in their plane — Part 1: Index test and KS ISO 12958-2:2020 KS ISO/TR 12960:1998 Kenya Standard — Geotextiles and geotextile-related products - Screening test method for determining the resistance to liquids, to be replaced by KS ISO 12960:2020 Agriculture KS EAS 738:2010 Kenya Standard — Fresh sweet cassava root — Specification, to be replaced by KS EAS 738:2023 KS EAS 778:2012 Kenya Standard — Fresh bitter cassava root — Specification, to be replaced by KS EAS 778:2023 KS ISO 16657:2006 Kenya Standard — Sensory analysis — Apparatus — Olive oil tasting glass, to be replaced by KS ISO 16657:2023 KS 2325-1:2021 Kenya Standard — Rabbit feed — Specification — Part 1: Complete feed, to be replaced by KS EAS 1092:2023 KS 1742:2013 Kenya Standard — Horse feed supplement — Specification, to be replaced by KS EAS 1093:2023 KS 2500:2022 Kenya Standard — Dairy cattle feed premix — Specification, to be replaced by KS EAS 1095:2023 KS 2508:2022 Kenya Standard — Poultry feed premixes — Specification, to be replaced by KS EAS 1094:2023 KS EAS 58:2000 Kenya Standard — Dog feed — Specification, to be replaced by KS EAS 58-2:2023 and KS EAS 58-1:2023 KS 2832-2:2019 Kenya Standard — Fodder hay — Specification — Part 2: Legume hay, to be replaced by KS EAS 1096-2:2023 KS 2832-1:2019 Kenya Standard — Fodder hay — Specification — Part 1: Grass hay, to be replaced by KS EAS 1096-1:2023 KS EAS 888:2018 Kenya Standard — Raw, roasted and fried groundnuts kernels — Specification, to be replaced by KS EAS 888:2023 KS EAS 889:2018 Kenya Standard — Groundnut kernels for oil extraction — Specification, to be replaced by KS EAS 889:2023 Engineering KS 4427-1:2007 Kenya Standard — Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General, to be replaced by KS ISO 4427-1:2019 KS 4427-2:2007 Kenya Standard — Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes, to be replaced by KS ISO 4427-2:2019 KS 4427-3:2007 Kenya Standard — Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings, to be replaced by KS ISO 4427-3:2019 KS 4427-5:2007 Kenya Standard — Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system, to be replaced by KS ISO 4427-5:2019 KS ISO 11922-1:1997 Kenya Standard — Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series, to be replaced by KS ISO 11922-1:2018 KS ISO/TR 4191:1989 Kenya Standard — Unplasticized polyvinyl chloride (PVC-U) pipes for water supply- Recommended practice for laying, to be replaced by KS ISO/TR 4191:2014 KS 1948:2019 Kenya Standard — Round strand galvanized steel wire ropes for shipping purposes — Specification, to be replaced by KS 1948:2023 Services KS ISO/IEC 17043:2010 Kenya Standard — Conformity assessment -— General requirements for proficiency testing, to be replaced by KS ISO/IEC 17043:2023 KS ISO/TS 14067:2013 Kenya Standard — Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and communication, to be replaced by KS ISO 14067:2018 KS ISO/PAS 17005:2008 Kenya Standard — Conformity assessment — Use of management systems — Principles and requirements, withdrawal without replacement KS ISO/PAS 17002:2004 Kenya Standard — Conformity assessment — Confidentiality principles and requirements, withdrawal without replacement KS ISO/PAS 17003:2004 Kenya Standard — Conformity assessment — Complaints and appeals — Principles and requirements, withdrawal without replacement KS ISO/IEC TS 17022:2012 Kenya standard — Conformity assessment — Requirements and recommendations for content of third-party audit report on management systems, withdrawal without replacement KS ISO 18513:2003 Kenya Standard — Tourism services — Hotels and other types of tourism accommodations — Terminology, to be replaced by KS ISO 18513:2021 KS ISO 8124-1:2014 Kenya Standard — Safety of toys — Part 1: Safety aspects related to mechanical and physical properties, to be replaced by KS ISO 8124-1:2022 KS ISO 10075:1991 Kenya Standard — Ergonomic principles related to mental work-load — General terms and definitions, to be replaced by KS ISO 1005- 1:2017 KS ISO 16069:2004 Kenya Standard — Graphical symbols — Safety signs — Safety way guidance systems (SWGS), to be replaced by KS ISO 16069:2017 KS ISO 3864 -3:2006 Kenya Standard — Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs, to be replaced by KS ISO 3864:2012 KS ISO 13857:2008 Kenya Standard — Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs and examples of methods, to be replaced by KS ISO 13857:2019 KS ISO 13849-1:2015Kenya Standard — Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design, to be replaced by KS ISO 13849-1:2023 9th February, 2024 THE KENYA GAZETTE Electrotechnical and ICT KS ISO 17640:2017 Kenya Standard — Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment, to be replaced by KS ISO 17640:2018 KS ISO 3452-1:2013 Kenya Standard — Non-destructive testing — Penetrant testing — Part 1: General principles, to be replaced by KS ISO 3452-1:2021 KS ISO 3452-2:2013 Kenya Standard — Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials, to be replaced by KS ISO 3452- 2:2021 KS OIML R49-1:2013Kenya Standard — Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements, to be replaced by KS ISO 4064-1:2014 KS OIML R49-2:2013Kenya Standard — Water meters for cold potable water and hot water — Part 2: Test methods, to be replaced by KS ISO 4064-2:2014 KS OIML R49-3:2013Kenya Standard — Water meters for cold potable water and hot water — Part 3: Test report format, to be replaced by KS ISO 4064- 3:2014 KS OIML R58:1998 Kenya Standard — Sound level meters, to be replaced by KS IEC 61672 Parts 1-3 KS OIML R 120:2010 Kenya Standard — Kenya Standard — Standard capacity measures for testing measuring systems for liquids other than water, scope covered under KS ISO 5167 series Dated the 30th January, 2024. ESTHER NGARI, PTG 1515/23-24 Secretary, National Standards Council.