GAZETTE NOTICE NO. 9251

IN EXERCISE of the powers conferred by section 12 of the County Governments, Act, 2012 as read together with section 9 (2) and the First Schedule of tlre County Assembly Services Act,20l7, and upon approval by the Busia County Assembly in its session held on Wednesday, 8th November, 2017 at 230 p.m., the Busia County Assembly Service Board appoints the persons named below to be the 4th and 5th Members of the Busia County Assembly Service Board- Bonface Mamai Ekada Miriam Wakaya Obura Dated the 13th November, 2017. ALLAN W. MABUKA, Clerk to the County Assembly.MR/3483283 GAzEmENoTIcENo. 11434 THE CONSTITUTION OF KENYA THE COUNTY GOVERNMENTS ACT (No. 17 of2012) KIRII\IYAGA COI.INTY EXECUTIVE COMMITTEE APPoINTMENT IN EXERCISE of the powers conferred by Article 179 (2) (b) ot the Constitution as read with section 30 (D @, k) of the County Governments Act and upon approval by the County Assembly of Kirinyaga in its sitting of the First Session of the Second County Assembly held on Wednesday, I l th October, 2017 , l, Anne Munbi Waiguru, Govemor, Kirinyaga County appoint the persons named in the first column of the Schedule to be members of ttre Kirlnyaga County Executive Committee responsible for the matters respectively spccified in the second column of the Schedule. SCHEDULE Name Responsibilities Agnes Wanjiku Gachoki (Dr.)Medical Services, Public Health and Sanitation James Kinvua Mutuei Education and Public Service Moses Migwi Maina Finance, Marketing, Economic Plannins and ICT Jackan Mureithi Gutu (Dr.)Agriculture, Livestock, Veterinary and Fisheries Iacqueline Wanjiku Njogu Environment, Water and Natural Resources Margaret Kibuchi Mith4mo (Dr.) Co-operative Development, Tourism Trade, Industrialization and F.nfemrise l-)evelonment Peter Mucira Karugumi Transport, Roads and Publtc Works Samuel Peter Murimi Kanjobe (Rev.) Land, Physical Planning and Housirt Dennis Gichobi Muciimi Youths and Sports Judy Wathata Kinyua Gender Culture and Social Services Dated the 31st October, 2017. MR/3483289 ANNE MUMBI WAIGURU. Gov ernor, Kirinvo ga C oun t.v. GAZETTE NoTIcE No. I 1435 THE COUNTY ASSEMBLY OFKIAMBU THE COUNTY ASSEMBLY STANDING ORDERS CALENDER oF ASSEMBLY SITTINGS, 2OI7 IT IS notified for general information that, pursuant to the provisions of Standing Order 39 of the Kiambu County Assembly Standing Orders, by a resolution made on Thursday, 28th September, 2017, tJ:r, Second County Assembly approved the calendar of the Asscmbly (First Assembly Regular Sessions) for 2017 as set out in the Schedule. SCHEDI.,LE Period Days First Session, First Part lhursday, 7th Septembcr- lhursday, 12th October, 2017 litting Days: fhursday, 7th September- lhursday, 12ttr October, 2017 lhort Recess: rriday, l 3th October, 2017- Vlonday, 30th October, 2017 lucsdays (aftemmn), Wednesdays (moming and rftemoon) and Thursdays .afternoon) rirst Session, Second Part fuesday, 3lst Octobcr, 2017 - lhursday, 7th Decembcr, 2017 litting Days: luesday, 3 1st October, 2017 - fuesdays (afternoon), Wednesdays (morning and rftemoon) and Thursdavs I I I I ,7t1 pgsernb( rr,2017 Recess: , 8th December, 2t ) 17 - , 12thFcbruary,2l0l8 of the First Session of the Secorrd Assembly Dated thc 6th October, 11017. MR/3556671 JOHNM. MUTIE, Clerk of the County Assembly ol Kiambu. GAzErrE NcrncE No. I I 436 THE CONSTI TUTION OF KI]NYA THE COUNTY (}OVERNMEN'TS ACT (No.1t7 of20l2) BARINGO COTINTY E XECUTIVE C)OMMITTEE APPON\TMENT IN EXERCISE of the powers conferred to ,me by Article 179 (2) (b) ofthe Constitution as read witlt sections 30 (2) (d), (e) and 35 of the County Govemments Act,2012, and upon agrproval by the Baringo County Assembly in its session held on the 9th November, 2017, I Stanley K. Kiptis, Govemor of Baringo Counq', appoint the persons named in the first column of the Schedule, to be members of the Baringo County Executive Committee responsible for matters respectively specified in the second column ofthro Schedule. Name of Member Responsibilities Richard Kipter Rotich (Dr.)Agriculture, Liverstock and Fisheries Manaqement Thomas ole Nong'onop Education, Sports, Culture, Gender and Social Servic;es )avid Serson Chesire (Dr.)Finance and Ecornomic Plannins V{arv Chebet Panca (Ms.) Health Services V{aureen Jemutai Rotich (Dr-)Devolution, Pub lic Service, Adminisfiation and ICT Philemon Kipkosgei Rono Transport, Publi.c,Works and lnfrastructure Ioel Kibiwott Koima (Dr.) Water and Irioration Elijah Kipkoros Lands, Housing and Urban Develonmertt 3lement Lomaring'oria Industrialization, Commerce and Co- onemtive Develonmenf Scholar J. Kimeli (Ms.) Environment Natural Resource, Tourism and Wildlife Manacement STANLEY K. KIPTIS, Governor, GAzErrE No[cE No. 1 1437 THE CONSTITUTION OF KENYA THE COUNTY GOVERNMENTS ACT (No. 17 of20l2) MOMBASA COLTNTY ATTORNEY ACT (No.2 of20t7) THE COUNTY GOVERNMENT OF MOMBASA APPoINTMENT IN EXERCISE of the powers conferred by section 30 (2) (a) of the County Govemments Act as read with section 4(2) of the Mombasa County Attomey Acl 2017 and upon approval by the County Assembly of Mombasa in its special sitting held on Thursday, 9th November, 2017,l, Ali Hassan Joho, Govemor of Mombasa County, appoint- JoSEPH MWASHIMBA MTALAKI to be the County Attomey of the County Govemment of Mombasa. Dated the l3th November,2017. ALI HASSAN JOHO, Governor, Mom bas a County. MR/3483100 MFJ3483214 MR/3483218 GAZETTENcnCENo. 11438 THE CONSTITUTION OF KENYA THE COUNTY GOVERNMENTS ACT (No.L7 ol20l2) THE MOMBASA COI.JNTY EXECUTIVE COMMITTEE APPoINTMENT IN EXERCISE of the powcrs confcrrcd by Article 179 (2) (b) of the Constitution of Kcnya as rcad with scctions 30 (D (A,@) and 35 of the County Govemmcnts Act, 2012 and upon approval by the County Asscmbly of Mombasa in its special sitting of thc First Scssion of the Second County Asscmbly hcld on 9th Novembcr, 2017, I, Ali Hassan Joho, Governor of Mombasa County, appoint the pcrson named in the first column of thc Schcdule bclow, to bc membcr of thc Mombasa County Executivc Committcc rcsponsiblc for the matters respectivcly spccificd in the sccond column of the Schedulc. SCHEDULE Narne Responsibilities Taufiq Mohamed Balala Transport, Infrastructure and Publil Works Kevin Munyoki Kyalo Youth, Gender, Sports and Cultura Affairs Godfrcy Nyongesa Nalo Environment, Waste Management anr Fncrov Edward Dzilla Nvale Lands. Plannins and Housins Hazel J. Koitaba Health Services Fatma A. Awale Water- Sanitetion and Nahrral Resources Marvam Abdillahi MbarulFinance and Economic Plannins Dated the 13th November,2017 MR/3483214 ALI HASSAN JOHO, G ov e rnor, Mombasa C o unty. GAzE'r'rE NsncE No. I 1439 THE CONSTMUTION OF KENYA THE COUNTY C,OVERNMENTS ACT (No.17 oJ2012) THE TAITA TAVETA COI,]NTY EXECUTTVE COMMITTEE APPoINTMENT IN EXERCISE of the powers confcrred by Article 179 (2) (b) of thc Constitution of Kenya as read with sections 30 (2) (d), (e) nd section 35 of the County Govemments Act,20l2 and upon approval by the County Assembly of Taita Taveta in its I lth sitting of the First Session of thc Second County Assembly held on Thursday, 2nd November, 2017, I, Granton Graham Samboja, Govemor of Taita Taveta County, appoint the persons named in the first column of the Schedule below, to be members of the Taita Taveta County Executive Committee responsible for the matters respectively specified in the second column ofthe Schedule. SCHEDULE Name Responsibilities Majala Delina Mlagui (Ms.)Ollice of the Deputy Governor County Transformation, Mining Industrialization and ICT Vincent Masawi (Dr.) Finance and Economic Planning Frank Mwaneemi (Dr.) Health Services Daniel Makoko Mwakisha Education and Libraries Getrude Nawoti Shuwe (Ms.)Trade, Tourism and Co-operativr f)evelonment Bigvai Mwailemi Youth, Gender, Sports, Culture anr Social Serwices uavls Mwangoma Agriculturc, Livcstock an( Fichericc Clarice Gombe Mnyambo (Ms.)Land, Environment and Natura Resources Dated 9ttt November 2017. GRANTON GRAHAM SAMBOJA, Governor, Taita Taveta County. l7th November,2017 THE KENYA GAZETTE 5927 GAZETTE No[cE No.1 I44O T}IE CONSTITUTION OF KENYA THE COUNTY GOVERNMENTS ACT, 2OI2 TTIE PUBLIC APPOINTMENTS (COI.JNTY ASSEMBLIES APPROVAL) ACT,2017 THE NAROK COUNTY ASSEMBLY STANDING ORDERS NCIIFICAIIoN To NOMINEES AND THE PUBLIC ON NOMINATION AND APPROVAL HEARING/VETTING OF COU}.ITY EXECUTIVE COMMTTME NoMINEES IT IS NOTIFIED for the information of nominees and the public that persons listed in the table below have been nominated by the Governor of Narok County for appointment as Members of the County Executive Committee in various departments and their names submitted for vetting/approval. Consequently, pursuant to provisions of Article 179 (2) (b) of the Constitution of Kcnya, 2010, sections 8 (1) (a) and 35(2) of the County Govemments Act, No. l7 of ?.012, section 7 of ttre Public Appointrnens (County Assemblies Approval) Act, No. 5 of 2017 and in particular, the specific requirements of subsections (2), (4) and (5) thereof, and Standing Order No. 42 and 185 of the Narok County Assembly Standing Orders, the following listed nominees to the respective departrncnts in the aforementioned capacity are invited to appear before the Assembly's Committee on Appointments at thc County Assembly Chambers, Narok, for approval hearings/vetting on Monday,2Tth November,20l7 as indicated below: Name of NominetDepartnenl Time Everlync Cherotich Koiyar Agriculture, Livestock and Fisherics10.00 a.m. Konnxo ole Koisamau Lands, Housing and Urban Development 10.30 a.m. Ezekiel Rono Public Works, Roads and TransportI1.00 a.m. Cecilia Saayioi Wuapari Trade, Industrialization and Co- operative Development I l 30 a.m The nominees are required to collect thc relevant Questionnaire from ttre Offrce of the Clerk of the County Assembly during official working hours or download from County Assembly website www.narokassembly.or.ke. eight copies of the fillcd questionnaire should be retumed together with 8 copies of the curriculum vitac, national identity cfid and certificd copies of personal credentiaVacademic certificates and other testimonials to the Offrcc of the Clerk of the County Assembly at County Assembly Buildings not later than Friday, 24th November, 2017 at 4.30 p.m. The nominees should also enclose 8 ccrtified copies of current clcarance cenificates from the following bodies: 1. National Police Service 2. Higher Education loans Board 3. R gietered Credit Reference Bureau 4. Konya Revenue Authority 5. Ethics and Anti-Comrption Commission Nominecs with foreign degrees must obtain accreditation from the Commission of Higher Education of Kcnya. The originals of the aforementioned documents should be availed to fie Committee during the approval hearing. Mombers of thc public arc invit€d to attend thc approval hcaring scssions.-Mombers of thc public are also invited to submit any infornretion or commcnt on the suitability or othcrwise of any of the nominccs for appointrncnt to the rEspectivc position. The submissions may bo.mrde by way of swom statcmcnts or affrdavits and may be accompanied by any documentary evidence. The submissions may be sent or hrnd'dclivered !o the following addrcss so as to bc reccivcd by Friday, 24th Novcmbcr, 2017 at4.30 p.m.- Thc Clc,rk, Narok County Asscmbly, P. O. Box 19-20500, Narck. Datcd the 13th Novembcr,2017 SHEDDD. SMOTWO, Clerk, Narok County Assembly.MR/3483201 GAzErrENo[cENo. I 1441 THE CONSTITUTION OF KENYA TIIECOUNTYGOVERNMENTS ACI, (No.t1 of20r2) ASSUMmON OF OFFICE oF TIiE GovERNoR, NyenI COUI,ITY PLIRSUANT to Articles 182 (1) (a) and 182 (2) of th c Constitution of Kenya, 2010, Edward Mutahi Kahiga, assumed office as the fbunh Govcrnor of Nyeri County and undertook the oath of o ff,rce on l3th Novcmber, 2017 in accordance with the provisions of Art icle 74 of the Constitution, 2010, hence being confirmed as the Gover, nor of Nyeri County. Dated the 14th November,2017. BENJAMIN WACHIRA GACH ICHIO, MR/3483288 County SecretarylHead of County Pub lic Sen'ice. GAzE-mE Nol]cE No. I 12142 THE CONSTITUTION OF KENYA THE COUNTY GOVERNMENTS ACT (No. 11 of20l2) APPOINTMENT IN EXERCISE of the powers conferred by Article 179 (2),) ol the Constitution as read with sections 30 (D (A, (i) aud 35 o f the County Governments Act, 2012, and upon approval by the It {yeri County Assembly in its First Session held on the Monda1,, 1 23rd October, 2017, I, Edward Mutahi Kahiga, Govemor of Nyeri (lou, rtY' appoint the persons named in the first column of the Scheduk', to be mcmbers of the Nyeri County Executive Committee responsrble 1 'or thc matters respectively specified in the second column of tl 'le Schedule. SCHEDULE Name of Member Responsibilities Kmyua tsredncl( Wan iohi Department of Water, Environment, Natural Resources and Sanitation Beth Karimi NjeruDepartment of County Public Service, Administration and Youth Affairs runyua fienry Gichuhi Departrnent of Agriculture, Livestock and Fisheries Mwangi Robert Thuo Department of Finance and Eronomic Planning Rachcl Kamau (f)r.) Department of Health, Public Hcalth und Sanitation Services Mrcnana Margarct Wanqcchi Department of Education, Sciencc and Tcchnology Muthui KariukiDepartment of Transport, Public Works, Infrastructure and Communication Wanjaria Daniel Kwai Department of Lands, Housing, Physical Plannino anrl I Jrhanizetinn I ancBla Lrrana Kcndi ljepafiment oI I raoe, uultur€, I ounsm ano uo- ooeratives Develooment Darcd thc l5th November,2017. MR/3483288 EDWARD MUTAHI KAHIGA, Governor, Nyeri County GAzE'nENo[cENo. 11443 TTIE CONSTITUTION OF KENYA THE COUNTY GOVERNMENTS ACT (No. t7 of20l2) KIAMBU COLTNTY EXECUTIVE COMMITTEE APPOINTMENT IN EXERCISE of the powers conferred by Article 179 (2) (b) ot the Conrtitution as read with sections 30 (D (4, (e) and 35 of the County Govcmments Act, 2012, ail upon ap,proval by the County Assombly of Kiambu in its sessions on the lst November, 2017,2nd Novcmber, 2017 and 8th Novcmbcr, 20,17, l, Ferdinard Waititu Name of the Member Responsibilities Martin Nioeu Mbueua (Dr.) County Secretary Wilson Mburu Kang'ethe Finance and Economic Planning Joseoh Np'ans'a Muresa (Dr.)Health Services Marsaret Waithira Ruinse (Dr.)Administration and Public Service Isabel Nyambura Waiyaki (Dr.)Trade, Tourism, Co-operatives and F.ntemrise I)evelnnmenf James Mitambo Maina Lands, Housing, Physical Planning and Urban Develooment John Gdthisi Muswe Roads. Transoort and Public Works David Kimani Kuria Water, Environment, Energy and Natural Resources Mary Wanjiku Kamau Youth Sports, ICT and Communication Jeremiah Nyori Mbugua Agriculture, Livestock and Fisheries Babayao, Govemor of Kiambu County, appoint the persons named in the first column of the Schedule, to be members of the Kiambu County Executive Committee responsible for the matters respectively specified in the second column of the Schedule. SCHEDULE Dated the l3th November,2017. MR/3483258 TERDINARD WATTITU BABAYAO, Governor, Kiambu County. GAZETTENoTIcENo. II44 THE LEADERSHIP AND INTEGRITY ACT (No.19 of20l2) LEADERSHIP AND INTEGRITY CODE FOR STATE OFFICERS INTHE COI,JNTY EXECTrTIVE COMMITTEE OF MOMBASA PART I_STATEMENT OF INTENT The l,eadership and Integrity Code for State Officers in the County Executive Committee of Mombasa is made pursuant to section 37 of the lradership and Integrity Act,20l2 and to give effect to Chapter Six of the Constitution of Kenya. The Code is intended to establish standards of integrity and ethical conduct in the leadership and managemcnt of public affairs of the County Executive Committpe by ensuring that the State Officers respect the values, principles and provisions of the Constitution and other applicable laws or policies on the standards of conduct and performance expected of holders of public offrce in the discharge of their duties. PART II_ PRELIMINARY PROVISIONS Citation l. This Code may be cited as the Iradership and Integrity Code for State Officers in the County Executive Committee of Mombasa. Commencement 2. This Code shall come into operation upon its publication in the Kenya Gazette. Interpretation 3. In this Code, unless the context otherwise requires- "Act" means the Leadership and Integrity Act,2012; (No. 19 of 2012) "Accounting Officer" means the County Secretary of the County Govemment of Mombasa "Authorized Offrcer" means the Govemor of the County of Mombasa and includes his designate. "Bank Account" has the meaning assigned to it under section 2 of the Actl "Code" means the Leadership and Integrity Code for State Officers in the County Executive Committee of Mombasa. "Commission" means the Ethics and Anti-Comrptron Commission established under section 3 of the Ethics and Anticomrption commission Act, No. 22 of 20ll; "Gazette" means the Kenya Gazette "His" includes the expression "her" "Office" means the office the County Executive Committee of Mombasa. "Personal Interest" means a matter in which a State Officer has a direct or indirect pecuniary or non-pecuniary interest and includes the interest of his or her spouse, child, business associate or agent; "Public Officer" has the meaning assigned to it under Article 260 of the Constitution; "Regulations" means the Regulations made by the Ethics and Anti- Comrption Commission pursuant to scction 54 of the Act; "Serving State Officer" means a State Officer who is in office at the time of commencEment of this Code; "State Officer" means a Member of the County Executive Committee of Mombasa; Application oJ Chapter Six oJ the Constitution, the kadership and Integrity Act,2012 and the Public Officer Ethics Act,200i 4. (1) The provisions of Chapter Six of the Constitution, thc lradership and Integrity Act, the Public Officer Ethics Act, 2003 and shall form part of the Code. (2) In the event that any provision of this Code is .inconsistent with the General Lcadership and Integrity Code prescribed under part II of the lradership and Integrity Act,2012 or a provision of any written law, the latter shall prevail. Commifinent to the Code 5. (1) A State Officer elected or appointed to the County Executive Committee shall sign and commit to this Code at the time of taking oath of office or within seven (7) days of assuming office. (2) A serving State Officer shall sign and commit to this Code within seven (7) days of the publication of the Code in the Gazette. (3) The declaration of commitment to the Code shall take the form and structure set out in the First Schcdule to this Code. PART II _ REQI,JIREMENTS Rule of Law 6. (l) A State Officer shall respect and abide by the Constitution and all other laws. (2) A State Officer shall carry out the duties of his or her office in accordance with the law. (3) In carrying out the duties of his or her office, a State Officer shall not violate the rights and fundamental freedoms of any person. Public Trust 7. A State Office is a position ofpublic trust and the authority and responsibility vested in a State Officer shall be exercised by ttre State Officer in the best interest of the office and the people of Kenya. Re sponsibility and Dutie s 8. Subject to the constitution and any other law, a State Officer shall take personal responsibility for the reasonably foreseeable consequences of any actions or omissions arising from the discharge of the duties of his or her office. Performance of Duties 9. A State Officer shall, to the best of his or her ability - (a) carry out the duties of the office efficiently and honestly; (b) carry out the duties of the office in a transparent and accountable manner; (c) keep accurate records and documents relating to the functions of the office; and (d) report truthfully on all matters of the offrce. Professionalisnt 10. A State Officer shall- (a) carry out the duties of his or her office in a manner that maintains public confidence in the integrity ofthe officel lTth November,2OlT THE KENYA GAZETTE 5929 (b) treat members of the public, staff and other state and public officers with courtesy and respect; (c) to the extent appropriate to the office, maintain high standards of performance and level of professionalism within the office; and (d) if the State Officer is a member of a professional body, observe and subscribe to the ethical and professional requirements of that body in so far as the requirements do not contravene the Constitution, any other law or this Code. Confidentiality 11. A State Officcr shall subjcct to Anicle 35 of the Constitution and any other relevant law, a State Offrccr shall not disclose or causc to be disclosed any information in his or her cuslody to any unauthorized person. Financial Integrity 12. (1) A State Officcr shall not usc his or her office to unlawfully or wrongfully enrich himsclf or herself or any other person. (2) Subject to Article 76 (2) (b) of thc Constitution a State Officer shall not accept a personal loan or bcncfit which may compromise the Starc Officcr in carrying out his or her duties. (3) a State Officer shall submit an initial dcclaration of income, assets and liabilities within thirty days of assuming office and thcreafter make biennial declarations to the office, and a final dcclaration within. thirty (30) days of ccasing to bc a State Officer. (4) The Declaration under sub-paragraph (3) shall be submitrcd to the County Public Servicc Board. (5) A declaration filed by a State Officcr in accordancc with the provisions of sub-paragraph (3) shall bc accessible to the Commission and any othcr person, subject to the provisions of section 30 of the Public OfFrcer Ethics Act, 2003. (6) A Statc Officer shall pay any taxcs, loans or other debts due from him within the prescribed period (7) A State Officer shall not neglcct their financial or legal obligations. Moral and Ethical Requirements 13. (l) A State Offlrccr shall obscrve and maintain thc following ethical and moral requicmcnts- (a) demonsrate honesty in thc conduct of his or hcr public and private affairs; (b) not to cngage in activities that amount to abuse of offrcc; (c) accurately and honcsty rcprcsent information to thc public; , (d) not engagc in wrongful conduct in furtherancc of pcrsonal benefit; (c) not misuse public rcsourc€s; A not fakiry any rccords; @ not sexually harass or have inappropriate sexual rclations with other State Officers, staff of the officc or any other person; (h) not engage in actions which would lead to the Statc Officers removal from the membcrship of a professional body in accordance with the law; 0 not commit offences and in particular, any of the offcnces under parts XV and XVI of the Pcnal Codc, Sexual offcnces act,2006, the Counter-Trafficking in Pcrsons Act, 2008, and the Children Act; (j) not engage in fighting or physical confrontation with any person; and (k) maintain high standards of etiqucttc at all timcs; (2) A person who wishes to be appointcd thc Offrcc shall for the purposes of this Code, submit to the Commissiona sclf-declaration in the form set out in the First Schedule to thc Act. (3) In respect to a person wishing to be elected to the office, the Declaration under sub-paragraph (2) shall be submitted to the Independent Electora.l and Boundaries Commission. Gifts or Benefits in Kind 14. (1) A gift or donation given to a State Officer on a public or official occasion shall be treated as a gift of donation to the office. (2) Nonvithstanding subparagraph (1) a State Officer may receive a gift given to the State Officer in official capacity, provided that- (a) the gift is within the ordinary bounds of propriety, a usual expression of courtesy or protocol and within the ordinary standards of hospitality ; (b) thc gift is not monetary; (c) the gift does not exceed the value ofKenys Shillings twcnty thousand or such other amount as may be prescribed by thc Commission through Regulations. (3) A Statc Officer shall not- (a) rccept or solicit gifts, hospitality or other bencfits from a person who- (i) has an intcrcst in any matter under considcration by thc Offrce; (ii) has a contractual relationship with the office; (iii) has any intercst that is directly or indirectly connected with the State Officers dutics; (iv) reccivc a gift which has the potential of compromising his or hcr integrity, objectivity or impartiality; or (b) Accept any type of gift expressly prohibited undcr the Act. (4) A Statc Offrccr who receives a gift or donation shall declare the gift or donation to thc Authorized Offrcer within (7) seven days of reccipt of the gift. (5) The Ofhce shall maintain a r€gister of all gifts received by thc State Officers scrving in the Office and another register of all gifts given by the offrcc to othcr State or Public Offlrcers. Wrongfiil or Unlawful Acquisition of Property 15. A State Officcr shall not use the ofFlce to wrongfully or unlawfully acquirc or influcnce the acquisition of public or other Propcrty. Conflict of Interest 16. (l) A Statc Officer shall use the best efforts to avoid being in a conflict of intercst a situation where his or hcr personal interests conflict or appear to conflict with the State Officers official duties. (2) Without Iimiting the gcnerality of subparagraph (l) a State Of6cer shall not hold sharcs or have any other intcrest in a corporation, panncrship or othcr body, directly or through anothcr person, if holding thosc shares or having that interest would result in a conflict of the Starc Officen and thc officcrs official dutics. (3) A State Officcr whose pcrsonal intcrest's conflict with thcir official duties shall declare thc pcrsonal intercst to the offrce. (4) The Office may give directions on the appropriate action to thc taken by thc Stat€ Officer to avoid thc conflict of intcrcst and thc Sterc Officer shall comply with thc directions, and refrain from participating in any deliberations with respcct to thc mattcr. (5) Any direction issued by the office undcr sub pamgraph (4) shall be in writing. (6) Notwithstanding any directions to thc contrary undcr subparagraph (4) a State Officer shall not influcncc thc award of a conEact to- (a) himself or hcrself; (b) the State Officers spouse or child; (c) a business associate or agcnt; or (d) a corporation, private company, partrrership or other body in which the officer has a substantial or controlling interest. (7) Where a State Officer is present at a meeting, and an issue which is likely to result in a conflict of interest is to be discussed, the State Officer shall declare the interest at the beginning of the meeting or before the issue is deliberated upon. (8) A declaration of a conflict of interest under subparagraph (7) shall be recorded in the minutes of that meeting. (9) The Offrce shall maintain a register of conflicts of interest in the prescribed form in which an affected State Officer shall register the paniculars of the regisnable interests, stating the natrre and cxtcnt of the conflict. (10) For purposes of subparagraph (9), the rcgistrable interests shall include- (a) the interests set out in the second schedule of the Act; (b) any conncction with a penon, hrm or a company, whether by rclation, friendship, holding of shares or otherwise, which is subjcct of an investigation by the Constitution; (c) any application for employment or other form of engagement with thc office by a family member or friend of the State Officer or by a law firm or corporation associated with ttre State Officer; (d) any application to the office, by a family member or friend of the State Officer, for clearance with respect to appointment or election to any public office; or (e) any othcr matter which, in the opinion of the State Officer, taking into account the circumstances thereof, is necessary for regisEation as a conflict of interest. (ll) The Office shall keep the register of conflicts of interest for five (5) years after the last entry in each volume of the register. (12) The Office shall prepare a report of the registered interests within thirty (30) days after the close of a financial year. (13) A State Offrcer shall ensure that an entry of regisrable interests under subparagraph (9) is updated and to notify the office of any changes in thc registrable interests, within one month of each change occurring. Gainful Employment 17. (l) State Officer who is serving on a full-time basis shall not participate in any other gainful employment. (2). In this section, "gainful employment" means work that a pcrson can pursue and perform for money or other form of compcnsation or remuneration which is inherently incompatible with thc responsibilities of the State office or which results in the impairment of the judgement of the State officcr in the execution of the functions of the State offrce or results in a conflict of interest in terms of scction 16. Participation inTenders Invited by the Ofice 18. (l) A State Officer shall not participate in a tender for the supply of goods or services to the office. (2) Norwithstanding subparagraph (1) a company or entity associated with the State Officer shall not be construed as nading with the officc, unless. (a) 0le Statc Officer has a controlling shareholding in the company or entity; or (b) the State Officer is a director of the company; or (c) thc Strtc Officer is a managing partner in a law firm providing scrvices to the office. Public Collections 19. (1) A State Officer shall not solicit for contributions from the officc or any other person or, public entiry for a public purpose unless the President has, by notice in the Gazette, declared a national disaster and allowcd a public collection for the purpose of the national disaster in accordance with the law. (2) A State Officer shall not participate in a public collection of funds in a way that reflccts adversely on the State Officers',inrcgrity, impaftiality or interfercs with the Performance of the officialduties. (3) Nothing rn this clause shall be constructed as prohibiting a State Officer from making voluntary contribution. Bank Accounts Outside Kenya 20. (l) Subject to Article 76(2) of the Constitution or any other written law, a State Officer shall not open or continue to operate a bank account outside Kenya witlrout the approval of the Commission. (2) A State Officer who has reasonable gmunds for opening or operating a bank account outside Kenya shall apply to thc commission for approval to open or operate a bank account outside Kenya. (3) A StBte Officer who operatcs or con$ols the operation of a bank account outside Kenya shall submit statements of the accouht annually to the commission and authorize the commission to verify thc statements and any other relevant information from the forcign frnancial institution in which the account is held. (4) Subject to subparagraph (l) and (2), a person who is appointcd or elected as a State Officer in the offrce and has a bank account outside Kenya shall, upon such appointrncnt or clectiori close the bank account within three (3) months or such other period as the Commission may prescribe by notice in the Gazette. (5) Subject to subparagraph (4) a State Officer may open or continue to operate a bank account outside Kenya as may bc authorized by the Commission in writing. Citizenship 21. (l) Subject to Article 78 (3) of the Constitution, a Statc officer who acquires dual citizenship shall lose his or her position as a Statc Offrcer. (2) A person who holds dual citizenship shall, upon election or appoinfinent to a State office, not takc ofFrce before ofFrcially renouncing their other citizenship in accordance with the provisions of the Kenya Citizenship and Immigration Act, 2011, (No. 12 of 2011.) Actingfor Foreigners 22. (l) A State Officer shall not be an agent of, or firrther the interests of a forcign government, organization or individual in a manger that may be detrimental to the security interests of Kenya, except when acting in the course of official duty. (2) For the purposes of this paragraph- . (a) an individual is a foreigner if the individual is not a citizcn of Kenya; and (b) an organization is foreign if it is established outside Kenya or is owncd or controlled by a forcign govemment, organization or individual. Care of Property 23. (l) A State Officer shall takc all reasonable steps to cnsurc that public property in his or her custody, possession or confol is taken care of and is in good repair and condition. (2) A State Offrcer shall not use public property, funds or services that are acquired in the course of or as a result of the official duties, for private activities of activities that are not relatcd to thc official work of the State Officer. (3) A State Officer shall retum to the officc all the public prcpcrty in his or her custody, possession or control at the end of the clection or contract term. (4) A Statc Officer who contsavencs subparagraph (2) or (3) shall, in addition to any other penalties providcd for undcr the Constitution, the Act or any other law, be personally liable for any loss or damagc to the public property. Misuse of Official Information 24. (l) A State Officer shall not directly or indirectly usc or jh,rv any person under the officers authority to use any Informrtion obtained through or in connection with the office, which is not available in the public domain, for the furthering of any private interest, whether financial or otherwise. (2) A State Officer shall not bc deemed to have violated thc requircments of subparagraph (l), if the information given- lTth November,2017 THE KENYA GAZETTE 5931 (a) pursuanttoacourtorder; (b) for purposes of educational, research, literary, scientific or other purposcs not prohibit€d by law; or (c) in compliance with Article 35 of the Constitution and the relevant Iaw. Impartiality 25. A State Officer shall, at all times, carry out the duties.of the Office with impartiality and objectivity in accordance with principles and values set out in Articles 10, 27,73 (2) (b) nd 232 of the Constitution and shall not practice favouritism, nepotism, tribalism, cronyism, religious bias or engage in other preferential treatment of another State Officer, Public Officer or a member of the public. Giving of Advice 26. A Statc Officer who has a duty to give advice shall give honest, accurate and impanial advice without fear or favour. Affers of Future Employment 27. (l) A State Offlrcer shall not allow himsclf of herself to be influenced in thc performance of his or her duties by plans or expectations for or offen of future employment or beneflts. (2) A State Officer shall disclose, in writing, to the Commission, all offers of firture employment or benefits that muld place the State Officer in a situation of conflict of interest. Former State Offrcer acting in a Government or Public Office 28. A former State Officer shall not be engaged by the Office in a matter in which the Statc Officer was originally engaged in as a State Officer, for at least two (2) years after leaving the offrce. Miskading the Public 29. A State Officer shall not knowingly give false or misleading information to any person. F alsific ation of Re c ords 30. A State Officer shall not falsify any records or misrepresent information to the public. Conduct of Private Affairs 31. A State Officer shall conduct their private affairs in a manner that maintains public confidcnce in the intcgrity of the Offlice. Bullying 32. (l) A State Officer shall not bully ano0rer State or Public Officer or any othcr person. (2) For putposcs of subparagraph (1) "bullying" includes blackmail, coerci,on, threats, intimidation or repeated offensive behaviour whictr is vindictive, crucl, malicious or humiliating whether or not is intendcd to undermine a person and includes physical assault. Acting through Others 33. (1) A St{e Officcr shell not- (a) cauce enything to be done through another person that would constitute a contravention of this Code, the Constitution or any, other law if done by the Statc OfErcer; or (b) allow or dircct a person under their supervision or control to do mything that is in contravention of this Code, the Constitution or any other law. (2) Subpragnph (1) (D) shall not apply whcre anything is done without the Sitc Offlrcer's knowledgc or consent or if the State 0fficer has taken rcasurble stcps to prcvent it. Reporting Improper Orders 34. (1) If,a Statc Officer considers that anything required of him or her is in ccntrrvcntion of thc Code or is otherwise improper or unethical, thc'Srue Officer shall report the matter to the Commission. (2) The ,Commission shall investigate the report and take appropriat€ aotion within ninety (90) days of receiving the rcport. Duty to Prevent Occurrence oJ Corruption or Unethical Practice in the Ofice 35. A Stat€ Officer who believes or has reason to believe comrpt act or unethical malpractice has occurred or is about to occur in the office shall take all necessary measur€s to prevent it from continuing or materializing in addition to any other apprcpriate action. Use of Social Media 36. A State Officer shall not use social media in a manner that is prejudicial to public interest, national cohesion or that otherwise constitutes a breach of any law. Dress Code 37. A State Officer shall maintain appropriate standard of dress and personal hygiene at all times. Political and other Influence 38. (1) A State Officer shall exercise independence in the discharge of his duties and shall not allow himself to be subjected to political or any other intemal or external influence that is detrimental to public interest. (2) A State Officer shall not influence of attempt to influence the decision of any other State or Public Officer or public entity on any matter. (3) A State Officer shall not in any way interfere with the duties of any other State Officer Public Officer or public entity. Iiplementation of Developmmt Projects 39. (l) A State Officer shall exercise prudence in the undertaking of development projects and shall at times prioritize projects that are most urgent for the public. (2) For the purposes of sub-paragraph (1), a State Officer shall, before planning for any project, !o the ext€nt applicable, undertake and facilitate public and stakeholder participation in the determination of the projects to be implemented at any given time. (3) A State Officer shall not undertake any project without prior planning or budgeting. (4) A State Officer shall not demand or accept any kickbacks, gifts, benefits or othcr favours from contractors. (5) A State Officer shall not compromise or abet comprising of standards of any project implemented for the office. (6) A State Officer shall, subject to the law, disclose all relevant information regarding any project to any person requiring such information. Pr efe r e nt ial Tr e atne nt 40. A State Officer shall ensure equal and equitable disribution of r€sources to all pemons and any section of the population in his area of jurisdiction and shall not confer any undue advantagc to any person or section of the population. PART IU_ENFORCEMENT OFTHE CODE 41. (l) Any person may lodge a complaint alleging a breach ofthis code by a State Officer to the Office or to the commission. (2) Breach of this Code amounts to misconduct for which the State Of[rcer may be subjected to disciplinary proceedings including removal from office; (3) Where a breach of this code amounts to violation of the Constitution, the State Officer may be removed from the offrce in accordance with the applicablc laws. (4) Whcre an allegation of breach is made to the Offrce, the person alleging the breach shall submit a petition scning out the grounds and facts of the alleged violation to the Authorized Officer of the Offrce. (5) Upon receipt of the complaint, the Office shall register and carry out investigations into the complaint, and may take action against the State. Oficer in Accordance with the Act and any Regulations nwde by the Cotnmission under the Act (6) If upon investigation into the alleged breach of the Code, the Offlrce is of ttre opinion that civil or criminal proceedings out to be preferred against the respective State Officer, it shall refer the matter to- (a) the Commission, with respect to civil matters; and (b) the Director of Public Prosccutions with respect to criminal matters. (7) Where the complaint is made to the Commission, the Commission shall take such action against the State Offrcer as it deems necessary in accordance with is mandate under the law. (8) Notwithstanding sub-paragraph (5), the Commission may, subject to the law, take any additional action it deems appropriate in relation to any breach of the Code or require the Office to take any action against a State Office who has breached the Code. Victimization 42. A State OfFrcer shall not in any way victimize any other State Officer or Public Officer or any other person for any lawful action or omission. Duty of Authorized Ofrcer and Accounting Oficer to Comply with Directives of the Commission in Implementation of the Code 43. Thc Authorized Officcr or Accounting Officer of the Office shall at all timcs comply with such orders or directives as may be issued by the Commission from time to time towards the implementation of this Codc. PART TV - GENERAL PROVISIONS Advisory Opinion 44. A State Officer or the office may request the Commission to give an advisory opinion on any issue relating to, but not limited to- (a) the application of Chapter Six of the Constitution; (b) the application of the Act or any other applicable law or regulations dealing with the ethics and integrity of State Officers; (c) the application of the Public Officer Ethics Act 2003, or any other law or regulations dcaling with tre ethics and integrity of public officen; the application of this Codc; an ethical dilemma; or any other matter incidental to the promotion of the ethics and integrity of State Officers and public off,rcers generally. Training on lzadership and Integrity 45. The ofFrcc shall collaborate with the Commission to ensure that the State OfFrcers and public officers serving in the Offrce are sensitized on leadcrship and integrity issues at least once a year. Personal Respo nsibility for Comp liance 46. Each State Officer shall take personal responsibility or compliance with thc provisions of this Code. Annual Report 47. The Authorized OfFrce or his designate shall cause to be prepared and submitted to the Commission an Annual Report on the progress made in implementation and enforcement of the Code in a prescribed format by the Commission. Amendment oJ the Code 48. The Office may with approval of the Commission amend this Code where appropriate. FIRST SCHEDULE (Para.6 (3)) COMMITMENT TO THE LEADERSHIP AND INTEGRMY CODE FOR STATE OFFICERS IN TIIE COTINTY EXECUTIVE COMMITTEE OF MOMBASA I................... .......holdcr ofNational ID/Passport No............................and Post Office Box No. ..................having been clcctcd or appointcd as il;;;; ; M;;;;; ;; h.Ji ."ii,-i t"1", *",. *""r"'Ifl underslood ilre lradership and Integrity Codc for State Officers in thc County Executive of Mombasa and hcrcby solcmnly declare and commit myself to abide by the provisions of thc Codc at all times. SIGNEDat................. .......... ) ) ) Bythesaid ........) ) ) Deponent This.........day of............................20......... ) ) ) Before Me ) ,......................... ) MR/3483136 Judgel Magistratel Commissioner for Oaths (d) (e) (f) GAZErIENONCENO. I1ZI45 THE STANDARDS ACT (Cap.496) IN EXERCISE of the powen confcned by section 6 (D (A of the Standards Act, the Cabinet Secrctary for Industry, Trade and Co-operatives, on the advice of the National Standards Council, makes thc following Order- THE STANDARDS ORDER, 2017 1. This Order may be cited as the Standards Order,2017. 2. Kenya Standards having been declared as set out in the first and second column of the schedule, no person shall manufacture or sell the commodities or use the methods and procedure on or after forty two (42) days of the date of publication of this Order unless the commodities, mcthods or procedures comply with the requirements of the relevant Kenya Standard. ScHEDI.ILE Title oJ Specification or Code of Practice KS 2158:2008 KS 2159:2008 KS 2l6l:2008 KS 2258:2010 KS2afr7:2012 Chemicals used for treatrnent of water intended for human consumption - Liquefied chlorine gas - Spccification. Chemicals used for treatrnent of water inlended for human consumption - Chlorine dioxide - Specification. Products used for treatment of water intended for human consumption - Bone charcoal. Specihcation for Water for lead-acid batteries Swimming pools water- Quality tolerances lTth November,2017 THEKENYA GAZETTE 5933 K52564:2014 KS 2565: 2014 KS 2587: 2015 KS 2588: 2015 KS 85:2007 KS 88:1979 KS EAS 123:1999 KS ISO 10229:1994 KS 1433:2001 KS 1738-1:2001 KS 1738-2:2001 KS 1738-3:2001 KS 1738-4:2001 KS 1738-5:2001 KS 1738-6:2001 KS 1738-7:2001 KS 1738-8:2001 KS 1738-9:2001 KS 2130:2008 KS 240:1997 KS 289:1981 K52332:2013 KS ISO 10964: 1993 KS ISO 13445:2003 KS ISO 20152-1: 2010 KS 1027-1:2012 KS 1027-2:2012 KS 1101:1991 KS 1102:1991 KS 1103:1994 KS 1104:1992 KS 1105:1994 KS 1266:1995 KS 1274:1996 KS 1275:1995 KS 1276:2012 KS 159:1979 KS 160:1980 KS 1332-4:1996 KS 1332-6:1996 KS 1332-7:1996 KS EAS 207:20O1 KS EAS 361:2004 KS EAS 751:2OlO KS EAS 752:2OlO KS ISO 10155:1995 KS 1289:1996 KS 1309-1:2010 KS 1309-2:1996 KS 1310:1996 KS 1424:1997 KS 1426:1997 KS 142'7:1997 KS 1968:2006 KS 2269:2010 KS 2270:2010 KS 2489:2013 KS 2490:2013 KS249l:2013 KS 275-1:2003 K5275-2:20O3 KS 515:2010 KS EAS 158:2012 KS EAS 177:2O12 KS ISO 8217:2005 KS 1265:2009 KS 1454:1997 KS 1578-1:2010 KS 1578-2:1999 Chemicals used for treatrnent of water intended for human consumption- Chemicals for emergency use Trichloroisocyanuric acid, Specification Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid - Specification Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous Chemicals used for treatment of water intended for human consumption - Aluminium sulphate - Specification (Third Edition). Specifrcation for distilled water. Distilled water - Specification. Water quality - Determination of the prolonged toxicity of substances to freshwater fish - Method for evaluating the effects of the growth rate of rainbow trout [Oncorhynchus mykiss walbaum (Telcostei Specifications for marble tiles and slabs. Specifications for ceramic floor and wall tiles - Part 1: Definitions, classification, characteristics and marking. Specifications for ceramic floor and wall tiles - Part 2: Extruded ceramic tiles with low water absorption E <=3 perccnt. Specifications for ceramic floor and wall tiles - Part 3: Exruded ceramic tiles with low water absorption 3 percent <=E<=6 percent. Specifications for ceramic floor and wall tiles - Part 4: Extruded ceramic tiles with low water absorption of 6<=10 percent. Specifications for ceramic floor and wall tiles - Part 5: Extruded ceramic tiles with low water absorption E>10 perccnt. Specifications for ceramic floor and wall tilcs - Part 6: Dust-pressed tiles with low water absorption (E<=3 pcrcent). Specifications for ceramic floor and wall tiles - PartT: Dust-pressed tiles with low water absorption 3 pcrcent <=E<=6 percent. Specifications for ceramic floor and wall tiles - Part 8: Dust-prcssed tiles with low water absorption 6<= 10 percent. Specifications for ceramic floor and wall tilcs - Part 9: Dust-pressed tiles with low water absorption E >10 percent. Grout for jointing marble, granite, ceramic and porcelain tiles - Cement-based - Specification. Specification for glazed earthenware tiles. Specification for unbacked flexible PVC floor covering. Glue stick-Specifi cation strength of anaerobic adhesives on thrcadcd fasteners Adhesives Determination of shear srength of adhesive bonds between rigid substrates by the block-shear method Timber structures Bond performance ofadhesives Part 1: Basic requirements Specification for auto-refinishing paints - Part 1: Synthetic resin based (Second Edition). Specification for auto-refinishing paints - Part 2: Nitrocellulose resin based Specification for titanium dioxide pigments for paints. Specification for lithopone pigments for paints. Specification for aluminium pigments for paints. Specifrcation for iron oxide pigments for paints. Specification forZinc dust pigment for paint. Specification for polyester body fillers. Specification for epoxy paint for coffee fermentation tanks. Specifi cation for distempers. Specification for Air dried roofing paints. Specification for zinc oxide for paints. Specification for whiting for paints. Specification for photographic chemicals - Part 4: Photographic grade sodium bisulphite. Specification for photographic chemicals - Part 6: Photographic grade hydroquinone. Specification for photographic chemicals - Part 7: Photographic potassium metabisulphite. Radiography of welds and viewing conditions for frlms - Utilization of recommended patterns of image quality indicators (r.Q.r). Carbaryl dusting powders - Specification Air quality-Specifi cation Air quality-Tolerance limits of emissions discharged to the air by factories Stationary Source ernissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test mcthods and specifications. Specification for illuminating kerosene. Diesel fuels - Specification - Part 1: Automotive gas oil (Third Edition) Specification for diesel fuels - Part 2: Industrial diesel oil (IDO). Specification for fuel oils. Colour code for identification of petroleum products supply, storage and distibution systems. Specification for paraffin wax. Specifrcation for microcrystalline wax of petroleum origin. The petroleum industry - Electrical installations in the distribution and marketing sector - Code of practice. Application of liquefied petroleum and compressed natural gases as engine fuels for internal combustion engines - Code of practice Bulk LPG road tankers - Vehicle, equipment and accessories - Assembly Engine coolant-Specifrcation Automatic transmission fluid- Specification Base oil- Specification Motor petrol (motor gasoline and motor spirit) - Specification - Part 1: [raded motor petrol. Motor p€trol (motor gasoline or motor spiri| - Specification - Part 2: Unleaded motor peEol. Gasohol 10 (V/V) - Specification (SecondEdition). Automotive gasoline (premium motor spirit) Specification Automotive gas oil (automotive diesel) Specification Petroleum products - Fuels (class F) - Specifications of marine fuels. Paraffin wax based candles - Specification (Second Edition). Specification for shoe cream. Metal polishes - Specification - Part 1: Ord.inary Iiquid metal polishes (Second Edition). Specification for metal polishes - Part 2: Special metal polishes. 5934 THE KENYA GAZFTTE lTth November,2017 KS 807-2:2010 KS 807-3:1996 KS 8074:2010 KS 807-5:1997 KS 807-6:1996 KS 807-7:1997 KS 807-8:1996 KS EAS 290-2:2002 KS EAS 2X)-3:2002 KS EAS 462:2007 KS ISO 1561:1995 KPAS 2355:2011 KS ll80:2012 KS 1181:2015 KS I182:1994 KS 1183:2013 KS 1184:2011 KS 1291:2013 KS 1292:2015 KS 1293:2013 KS 1294:2015 KS 1295:1996 KS 1296:2015 KS 155:2015 KS 156:2014 KS 2040:2008 KS 2041:2008 K52272:2011 KS 2350:2012 KS 2351:2012 KS 242:1980 KS 2436:2013 KS 2470:2013 K52471:2013 K52472:2013 KS 400:1983 KS 591:2011 KS 666:201I KS 87:2012 KS 914:2013 KS EAS 122:1999 KS EAS 326:2O02 KS EAS 345:2OO4 KS ISO 5280:1979 KS 1290-1:1999 KS 1290-2:1998 KS 1290-3:1998 KS 1796:2003 KS223l:2012 KS 2501:2013 KS 2502:2013 KS 809-3:2013 K5927:1997 KS l0l3:2001 KS 1026:1990 KS 1106:1994 KS 1281:1996 KS 1422:1998 KS 1522-2:1999 KS 1567:2005 KS l58l-l:2001 KS 1581-2:2001 KS 1794:2007 KS 1821:2005 K52322:20ll KS 2323:2011 K52359:2O12 K52362:2O12 K52387:2012 KS 2388:2012 KS 243:1980 KS 2453:2013 KS 2454:2013 K52534:2O14 Polishes - Specification - Part 2: Floor polish solvent rype (Liquid and Paste) (Second Edition). Specification for polishes - Part 3: Floor polish water emulsion buffablc type. Polishcs - Spccification - Part 4: Floor polish, water emulsion self shining type (Second Edition). Specification for polishes - Part 5: Floor polish pigmcnted paste type. Specification for polishes - Part 6: Automobile polish, wax solvent pastc type. Specification for polishes - Part 7: Wooden fumiturc polish paste. Spccification for polishes - Part 8: Automobile polish - liquid. Polishcs - Specification - Part 2: Floor polish solvent type (liquid and paste). Polishes - Spccification - Part 3: Floor polish watcr cmulsion buffablc type. Shoc polish wax solvent paste typ€ - Specification. Dental casting wax. Powdcrcd diatomaceous earth(diatomite) -pecifi cation Ethyl mcthyl ketone(butanone for industrial use) - Specification Specification for methyl isobutyl ketonc (4-Methyl penta-n-2-one). Spccification for butyl alcohol (Butonal for industrial use). Isobutyl alcohol (2-methyl propan-l -ol) -Specification Specification for isopropyl alcohol (propan-2-ol) for industrial use. Specification for butyl acetate for industrial use. Specification for ethyl acetate for industrial use. Isobutyl acetate (methyl propyl acetate) for industrial use - Specification Specification for isopropyl acetate for industrial use. Diacctone alcohol for industrial use - Specification (Second Edition). Specification for ethyl glycol (2-ethoxycthanol) for industrial use. Sodium carbonate (Technical grade) - Specification (Third edition) Caustic soda, analytical and technical - Specification Calcium chloride - Specification. Ethanol for industrial use - Specification. Nitric acid - Specification Sodium silicate- specification Surgical spirit- specifi cation Specification for sulphuric acid for use in lead-acid batteries. Formldehyde Solution for Indusrial Use - Specification Hexane for industrial use- Specification Methanol for industrial use-Specifi cation Food gradc hexanc- Specification Specification for acetic acid. Denatured spirits Specification Specification for white spirit (mineral turpentine). Hydrochloric acid- Specifi cation Acetone for industrial use-Specification Sulphuric acid-Specification Copper/chromium / arsenic composition for the preservation of timber - Specification. Toluene- Specifrcation Xylene for industrial use - Specification Specification for blcaching agents - Part 1: Sodium hypochlorite solutions (Second Edition). Spccification for bleaching agents - Part 2: Sodium hypochlorite solution for water treatment. Specification for blcaching agents - Part 3: Chlorinated limc bleaching powdcr for wrter trcatment. Spccification for domcstic chlorine based sterilizing fluids. Antibactcrial bathing bars - Specification. Dctergcnt- disinfcctant liquid toilet clcansers-Spccification Liquid oxygen bascd bloech for domestic use- Spccification Spccification for toilet clcaners - Part 3 :Alkalinc and neural liquid toilct cleaners Specification for disinfccting general purpose detergents. Code of practice for layilg of flexible PVC shect and tile flooring. Specification for protractors and set squares for use in schools. Specification for water Elosct (WC) plastic seats and covcrs Specification for WC flushing cistems Positivc list of contentsof polyvinyl chloride (PVC) and its contact with foodstuffs, pharmaceuticals and drinking watcr. Specification for rubbei.bascd.adhesives for tyres and tubcs - Part 2: Curing. Rotational moulded polyothylene water storagc tanks - Specification. Specification for thermophctic dustbins and lids - Part l: Thcrmoplastic dustbins. Specification for thermoplastic dustbins and lids - Part 2: Plastic and rubbcr dustbin lids. Polyethylene and polypropylone bags for general purposes - Specification (Sccond Edition). Plastic monobloc chairs -.Spccifidation. Polyhtylcne for its use in contact with foodstuffs, pharmaccuticals and drinking water- Spccification Polypropylcne and its copolymers for its safe use in contact with foodstuffs, pharmaccuticals and drinking watcr- Specification Polystyrenc (crysul and'high impact) for its safe use in contact with fmstuffs, pharmaccuticals and drinking warcr- specification Polyvinyl chloridc (PVC) and its copolymers for its safc usc in contact with foodstuffs, Pharmaccuticals and Drinking Water- spccification Polyyalkylenc tcrcphthalatcs ( PET and PBT) for their safc use in contact with foodstuffs, pharmaccuticals and drinking water- Specification Disposable cxpanded polystyrcne food containers-Specification Specification for PVC (vinyl) asbestos floor tiles. Disposable polystryrenc cudery-Specifi cation Plastic tableware- Specifieation Positive list of constituonts of melamine-formaldehydc resins in contact with foodstuffs, pharmaccuticals and drinking water 17th November,2Ol7 THE KENYA GAZETTE 5935 KS 2535:2014 Mclaminc-formaldchyde resins for its safc usc in contact with foodstuffs, pharmaceuticals and drinking water Spccification KS 2598:2015 Plastic posts-spccification Part 1: Fcncing post KS 379:1982 Spccification for melaminc plastic tablewarc KS398:1983 Specificationforthcrmosettingplasticbuttons. KSISO6486-l:1981 Ceramic ware, glass-ceramic ware and glass dinncrwarc in contact with food - Release of lcad and cadmium - Part 1: Test method. KSISO6486-2:1999 Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of lcad and cadmium -Part2: Ks Iso 8391-1:1986 "Irffi:tt3:?lHln contact with food - Release of lead and cadmium - Part l: Mcthod of tcst. KS ISO 8391-2:1986 Ceramic cookware in contact with food - Releasc of lead and cadmium - Pan 2: Permissible limits. KS 353:1985 Specification for crown finish glass bottlcs. KS 649-1:1989 Specification for toughened automobile windscrccns - Part 1: Spccification for toughed windscrecns. KS 649-2:1989 Specification for automobile windscreens - Part 2: Laminated automobilc windscrecns. KS 650:2001 Specification for glass globcs for paraffin lighting appliances for domestic use KS 2497:2013 Multi-wall papcr sacks for packaging of cement-Specification KS 2578:2015 Specification forbeveragcs KS ISO 18606: 2013 Organic recycling cnvironmcnt - KS ISO 8768:1987 Packaging - Complerc, fillcd transport packagcs - Toppling tcst. KS l8l5-l:2005 Symbolic safcty signs - Part 1: Standard signs and general requircments. KS 814:2015 Specification for rctroreflectivc shecting matcrials for raffrc signs. KS 815:2012 Specilication for portablc retroreflective waming triangles for motor vehicles (Second Edition). KS 924:,2012 Specification for motor vehicle chevrons, decals and strips KS 942:2010 Process colours fortraffrc signs- Specification KS 2170-1:2009 Medical gases - Specification - Pan 1: Medical oxygen. KS 2170-2:2008 Mcdical gases - Specification - Pan 2: Medical air. KS 2170-3:2008 Medical gases - Specification - Part 3: Medical nitrous oxide. KS 2170-4:2009 Medical gases - Specification - Part 4: - Medical carbon dioxide. KS 2200-1:2009 Nitrogen - Specification - Part 1: High purity nitrogen. KS 22N-2:2009 Nirogen - Specification - Part 2: - Industrial Nitrogen. KS 2201:2009 Brcathing oxygen for airborne application - Specification. KS 2202-L:2009 Breathing gases for diving and hyperbaric applications - Specification - Part 1: Breathing oxygen. KS 2203:2009 Compressed airforbreathing apparatus - Specification. KS 2266-l:2011 Argon - Specification KS 2266-2:2011 Argon-Specification-Part 2:High-purity argon K52266-3:2011 Specification for Argon KS 226'7 -l:2011 Helium-Specification. Part I :Ultra high purity helium K52267-2:2011 Helium-Specification.Part2:Highpurityhclium KS 2268,,201L Specification of Ethylene Oxide KS 234O-l: 20 I I Hydrogen- Specification Part 1: Industrial hy&ogen KS 234O-1:201 I Hydrogen-Specification Part 1: Industrial hydrogen KS 23at0-2:2011 hydrogen- specification part 2:high purity hydrcgcn KS 2341:201 I Industrial Liquid chlorine- Specification K52342l'2011 Liquid sulphur dioxide - specification - Part 2: Refrigeration grade liquid sulphur dioxide K52342-l:2O11 Liquid sulphurdioxide - Specification - Part 1 :Technical grade liquid sulphurdioxide KS24l3:2012 High purity nitrous oxide - Specification KS 2414:2012 Ultra high purity nitrous oxide- Specification KS 2438:2013 High purity compressed air-Specification KS 2439:2013 Ultra high purity compressed air- Specification KS 2440:2013 High purity oxygen- Specification KS244l:2013 Ultrahighpurityoxygen-Specification KS 375:2010 Industrial liquid carbon dioxide - Specification (Second Edition). KS 647:2010 Industrial oxygen - Specification (Second Edition). KS 648:2010 Industrial acetylene gas - Specification (Second Edition). KS EAS I 50 : 2000 Carbon dioxidc for carbonation of beverages - Methods of test. KS ISO 10083:2006 Oxygen concentrator supply systems for use with medical gas pipeline systems. KS ISO 11760:2005 Classification ofcoals KS ISO 14175:2008 Welding consumables- Gases and gas mixtures for firsion welding and allied processes KS ISO 14687:1999 Hydrogen fuel - Product specification. KS ISO 1552:1976 Liquid chlorine for industrial use - Method of samptng (for determining only the volumetric chlorine content) KS ISO 2121:1972 Liquid chlorine for industrial use- Detcrmination of water content- Gravimetric method KS ISO 4633: 2002 Rubber seals Joint rings for water supply, drainage and sewerage pipclines Specification for materials KS ISO 4706:2008 Refillable weldcd stecl gas cylinders. KSISO6448:1985 RubberscalsJointringsusedforPetroleumproductsupplypipesandfittingsSpecifrcationformaterial KS 203 I :2007 Radioactive waste - Disposal by the user - Code of practice. K52067-2:.2O09 Specific industrial effluent standards - Part 2: Sugar industry. K52493-2:2O13 Management of healthcare waste Part 2: Managcment of healthcare risk waste for healthcare facilities and healthcare providers in rural and remote settings KS 2530: 2014 Transport ofdangerous goods - Packaging and large packaging for road and rail transport KS 2591 -5: 2015 Predisposal managemcnt of radioactive waste Part 5: General safety requirements KS 26O5: 2015 Globally Harmonized Syslem of classification and labelling of chemicals (GHS) KS 983:1 999 Specification for performance requirement for incineration plant for the destruction of hospital waste. KS ISO I 1 932:1 996 Activity measurements of solid materials considered for reeycling, re-use, or disposal as non-radioactive waste. KS 1267-2:20ll Pillows for domestic use - Part 2: Synthetic fibre filled (Second Edition) KS 1267-3:2011 Pillows for domestic use - Part 3: Plumage filled (Second Edition) KS 2114:2007 Spring matresses - Specifrcation. KS 3764:2013 Flexible polyurethane (polyether)foams-Spccification Part 0: General requirements KS 376-2:1999 Specification for flexible polyurethane foams - Part 2: Reconstituted flexible polyurethane foam. KSISo 11158:1ee7 tlifi:iff,;lr:HUJXl._rtlated products (class L) - Family H (hydraulic systems) - Specifications for categories KS ISO 12922:1999 KS 1100:2010 K52273:20t1 K52294:2011 K52437:2O13 KS 25:2008 KS 2519:2014 KS 2607: 2015 KS EAS 295:2002 KS 1406-1:1997 KS 1406-3:1997 KS 1407-2:1998 KS 1408-1:1998 KS 1410-1:1998 KS 1410-2:1998 KS 1410-3:1998 KS 1411-1:1998 KS 1411-2:1998 KS 381:1983 KS 653:2010 KS 654:2010 K52443-l:2013 K52324-l:2011 K52324-3:2011 K52324-4:2011 K52324-5:2011 K52324-6:2011 K52324-7,,2011 K52382-t:20r2 K52382-2:2012 K52382-3:2012 KS 2383-l:2012 K52383-2:2012 K52384:2012 KS2417-l:2013 K52529:2014 KS 65 1-l:1996 KS ISO 4586-1:1999 KS 509:1997 KS 589-l:1996 KS 1809:2006 K52242-l:2010 K52242-2:?.OlO K52242-3:2010 KS 23:1976 KS 421:2010 KS 582:1987 KS 603:2002 KS 604:1987 KS 605:1987 KS 802-1:1989 KS 802-2:2001 KS 921:1991 KS 948:1999 KS EAS 344:2N4 KS EAS 483:1984 KS ISO 11093-1:1994 KS ISO 6590-l:1999 KS 1150:1995 KS 1524-3:2007 KS 1524-4:2001 KS 1783:2004 KS 1846:2007 KS 2053-l:2007 KS 2053-2:2007 KS 2053-3:2007 KS 2053-4:2007 KS 2053-5:2007 KS 2054:2007 KS 377:1983 KS 391:1983 KS 512:2001 KS 700:1990 HFDU.cants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR ANd Scouring pads -Specification Steel wool - Specification Aluminium foil - Specification Stretch cling film- Specification Matches Specification (Third Edition). Shoe brush Specification Baby feeding bottles - Specification. Sodium hypochlorite solutions for domestic use - Specification. Specification for carbaryl - Part 1: Technical grade. Specification for carbaryl - Part 3: Water dispersible powders. Specification for chlorpyrifos Part 2: Emulsifiable concentrates. Specification for technical grade - _Part 1: Dimethoate. Specification for marathion - Part 1: Technical grade. Specification for marathion - Part 2: Emulsifiable concentrates. Specification for Marathion - Part 3: Dusting powders. Specification for diazinon - Part 1: Technical Grade. Specification for diazinon - Part 2: Emulsifiable Concentrates. General methods of test for pesticides and their formulations. Specification for household insecticidal aerosols (Second edition) Mosquito coils - Specification (Second Edition). Fireworks Part I :Classification Identification and classification of dangerous goods for Eansport part l:introduction,classification system Identification and classification of dangerous goods for Eansport part 3:special provisions relating to articles or substances and numerical list of dangerous goods Identification and transport of dangerous goods for transport part 4:alphabetical list of dangerous goods identification and classifrcation of dangerous goods for tmnsport part 5:alphabetical list ofbasic radionuclide values for individual radionuclides Identifrcation and classification of dangerous goods for transport part 6:alphabetical list of pesticides(technical)toxicity Identification and classification of dangerous goods for transport part 7:list of generic or N.O.S proper shipping names Transport of dangerous goods- Emergency information systems Part: Emergency information system for road transport Transport of dangerous goods- Emergency information systems - Part 2: Emergency information system for rail transport Transport of dangerous good - Emergency information systems Part 3: Emergency response guides The warehousing of dangerous goods Part I : General requirements The warehouse of dangerous goods Part 2: The storage and handling of gas cylinders Transport of dangerous goods- Operational requirements for road vehicles Storage tank facilities for hazardous chemicals part l: Above-ground storage tank facilities for non-flammable The classification of hazard locations and the selection of apparatus for use in such locations Specification for footwear adhesives - Part l: Rubber based adhesives. High pressure decorative laminates sheets made from thermosetting resins - Part l: Classification and specifications. Specification for adhesives for woodworking. Specification for carton adhesives - Part 1: Comrgated fibreboard boxes - PVA adhesives. Paper punch - Spccification. Particlcboards - Specification - Part 1: General requirements for all board types Particleboards - Specification - Part 2: Requirements for general purpose boards for use in dry conditions Particleboards - Specification - Part 3: Requirements for boards for interior fitments (including fumiture) for use in dry conditions Specification for mailing envelopes. Newsprint- Specifi cation Specification for paperboards for packaging. Specification for files and folders (Second Edition). Specifrcation for stencil papers. Specification for duplicating papers. Specification for cut-size office papers - Part 1: General purpose paper (Second Edition). Specification for cut-size office papers - Part 2: Photocopy paper (Second Edition). Specification for kraft liner. Specification for comrgatcd fibreboard boxes for export of horticultural produce (Second Edition). Exercise books - Specification. Specification for basc papcr for carbon paper Specification for paper and board - Testing of cores - Part I : Sampling. Packing - sacks - vocabulary and typcs - Part 1: Paper sacks. Specification for condenser rubbers for cards. Specification for gloves - Part 3: Artificial lnsemination (A.I.) gloves. Specification for gloves- Part 4: Rubber glovcs for household or beautician use. Rubbcr and plastic conlainers for lead-acid storage batteries - Specification. Rubbcr bands - Specification. Carbon black used in rubber products - Specification - Part 1: lntermediate super abrasion fumace carbon black (ISAF) - N2l9 grade. Carbon black used in rubber products N220 gradc. Carbon black used in rubber products N23 I grade. - Specification - Part 2: Intermcdiate super abrasion fumacc cfibon black (ISAD - - Specification - Part 3: Intermcdiate super abrasion fumace carbon black (ISAD - Carbon black used in rubber products - Specification - Part 4: High abrasion furnace carbon black (HAD - N330 grade. Carbon black used in rubber products - Specification - Part 5: Fast extnrsion fumace carbon black (FEF) - N550 grade, Rubbcr erasers - Specification. Specification for industrial and safety rubbcr knce boots. Specification for gencral purpose rubber knee boots. Specification for rubbcr-based flooring tiles (Sccond Edition). Specification for inncr tyrc tubcs for motorised vehiclcs. 17th November,2OlT THE KENYA GAZETTE 5937 KS 701:1990 KS 823: 1993 KS 163:2000 KS 162:1997 KS l7l6:2012 KS l717:2003 KS 1718:2003 KS I719:2003 KS 1822:2007 KS 1823:2007 KS 1831:2007 KS 1985-1:2007 KS 1985-10:2007 KS 1985-21:2007 KS 1985-3:2007 KS 1985-4:2007 KS 1985-5:2007 KS 1985-6:2007 KS 1985-7:2007 KS 1985-8:2007 KS 1992:2007 KS 2157-1:2009 KS 2157-2:2009 KS 2516:2014 KS 2581:2015 KS 621:1986 KS 622:1987 KS 667:2013 KS 811:2013 KS 812:2012 KS 813:2013 KS 83:1978 KS 909:1991 KS 910:1999 KS 9l l:1990 KS EAS 289:2007 KS 1455-l:1999 KS 1508: 1998 KS 1696:2001 KS 1767-l:2006 KS 1795:2003 KS 1921 KS l94l-l:2005 KS l94l-2:2005 KS 2l 15:2007 KS 2l l7:2013 KS 2l l8:2014 KS 2l l9:2013 KS 2230:2010 KS 2408:2012 KS2415.'2012 K52434-l:2013 K52434-2t2013 KS 2568:2014 KS 2575:2015 KS 2589: 2015 KS 386:1982 KS 44-2:2005 KS 655:1987 KS 803-1:1988 KS 803-2:1988 KS 803-3:1988 KS 804:2010 KS 805:1988 KS 809-1:1988 KS92-2:2011 KS 92-3:2003 KS EAS 127-l:2013 KS EAS 186:2013 KS EAS 294:2OOl KS EAS 296:2N2 KS EAS 3l,,2013 KS EAS 383:2013 KS EAS 484:2008 KS EAS 487:2008 KS EAS 766-lt2013 KS EAS 766-2: 2013 KS EAS 787:2013 KS EAS 788: 2013 KS EAS 789:2013 Specification for tyre valves Specification for v-belts for industrial machines Colours for ready mixed paints (Second Edition). Specification for road marking paints (First Revision). Specification for 2-pack acrylic resin based auto rcfinishing paint. Specification for thinner for synthetic resin based autorefinishing paints. Specification for thinner for nitocellulose resin based paints and lacquers. Specification for thinner for acrylic rcsin based auto-rcfinishing paint. Solvent-based universal undercoat - Specification. Water-based universal undercoat - Spccification. Solvent-based paint rcmover - Specification. Marine paints - Specification - Part 1: Two-pack epoxy primer marine paint. Marine pains - Specification - Part 10: Hydrolysing organosilyl polymer-based antifouling marine paint. Marine paints - Specification -Part2L: Rcady mixcd exterior finishing pains for ships. Marine paints - Specification - Part 3: Vinyl paints-primer, high build and gloss marine paints. Marine paints - Specilication - Part 4: Two pack epoxy enarnel. Marine paints - Specification - Part 5: Watcrbome primer for galvanized, zinc / aluminium alloy-coated. Marinc paints - Specification - Part 6: Two-pack full gloss polyurethanemarine paint. Marine paints - Spccification - Part 7: Etch primcrs (Single pack and two-pack). Marine paints - Spccification - Part 8: Non-slip deck paint. Two-pack cpoxy zinc phosphate wcldable primer - Specification. Hot applied thcrmoplastic road marking paint - Spccification - Part 1: Constituent matcrial and mixtures. Hot applied thermoplastic road marking paint - Spccification - Part 2: Road performance. Shellac varnish-Spccification Paints and varnishes Vamish for wooden surface Specification Spccification for black bituminous paints for cold application Specification for aluminium priming paints for woodwork. Specification for water thinned priming paints for wood. Specification for semi-gloss emulsion paints for cxterior use. Specification for matt emulsion paint for exterior use. Specification for matt solvent borne paints for interior and exterior use. Glossary of terms relating to paints. Specification for semi-gloss solvent bome paints for interior and exterior use. Specification for super-gloss solvent bome paints for interior and extcrior use (Second Edition). Specification for flat paint brushes. Aluminium pigments for paints - Specification. Specification for glass cleaner - Part 1: Liquid glass cleaner. Specification for automotive multipurpose lithium soap grasses Specification for detergent for industrial dishwashing equipment. Bath preparations - Specification - Part l: Foam baths and shower gels (Second Edition). Ncem herbal soap - Specification. Gel soap - Specification. Scouring compounds - Part 1: Dishwashing paste - Specification. Scouring compounds - Part 2: Antibacterial dishwashing pastc - Spccification. Soap powder or chips - Specification. Acidic detergents for'cleaning -in-placc' in food and bcverage industry - Specification Sodium hypochlorite solution for use in food and beverage industry Specification Heavy-duty alkaline detergents for'cleaning-in-place' in food and beverage indusry-Specification Soap noodles - Specification. Soap starch-Specification Liquid hand wash- Specification Synthetic liquid laundry detergents-Specification Part l: Hand wash Synthetic liquid laundry detergants- Specification Part 2: Machinc wash Powder sanitizers Alkaline drain cleaner/unblocking agcnt Speoification Liquid drilling detergent/foam Specification Specification for carbolic toilet soap. Toilct soaps - Specification - Part 2: Baby soaps (Sccond Edition). Specifi cation for scouring powders. Specification for liquid soaps - Part 1: Toilet soap. Spccification for Iiquid soaps - Part 2: Liquid floor soap. Specification for liquid soaps - Part 3: l,otion soap. Spccification for antibacterial toilet soap Spccification for a waterlcss hand cleaner. Specification for toilet clcansers - Part l: Powdcr toilet bowl cleanser. Synthetic detcrgcnt powders- Spccification Synthctic detcrgent powders - Specification - Part 3: Determination of biodcgradability of surfactants - Tcst mcthods. Synthctic dctcrgcnt powders Specification Part 1: Houschold hand use Toilet soap - Specification. Scouring powder - Spccification. Liquid household hand dishwashing and light duty detergent - Specification. laundry soap Specification Synthetic organic liquid detergent for houschold use Spccification Analysis of soaps - Determination of unsaponifiable, unsaponified and unsaponifiedsaponifiable matter, Soaps - Dercrmination of moisture and volatilc mattcr cont€nt - Oven mcthod. Antibacterid toilct soap Specification pt 1: Solid Antibacrcrial toilet soap Specification part 2: Liquid Synthetic industrial detergent powder Spccification Syn*retic detcrgcnt paste Specification Instant hand sanitizcrs Specification KS EAS 790:2013 KS EAS 791:2O13 KS EAS 792:2013 KS EAS 793-t:2013 KS 1748:2001 KS 1999:2007 KS 2000:2007 KS 2044:2011 KS 24:2001 K52567:2014 K52597:2015 KS 3:1976 KS 388:1984 KS 389:1984 KS 4:1976 KS 483:1984 KS 484:1984 KS EAS 355:2N4 KS ISO 6907:1994 KS ISO 8789:1994 KS 1222:1992 KS 1799-l:2003 KS 1799-2:2004 KS 1800:2003 KS l80l-l:2003 KS 1801-2:2003 KS 1805:2004 KS 1806:2004 KS 1807:2005 KS 1830:2005 KS 1832:2005 KS 1833:2006 KS 1934:2006 KS 1935:2005 KS 1936-1:2005 KS 2381:2013 KS 518:2005 KS 810:2013 KS2042:.2013 KS 2121:2008 KS 397:1997 KS 421:201 KS 422:2OOl KS 517-l:2014 KS 89:2015 KS 90:2006 KS l2X)4:2O07 KS 1918:2005 KS 1919:2005 KS 1920:2005 KS 1273:1995 KS 1518:1999 KS 1519:1999 KS 1520:1999 KS 1522-1:1999 KS 1530:1999 KS EAS 127-2:2O14 KS EAS 812-l:2O14 KS EAS 815:2014 KS EAS 816-l:2014 KS EAS 816-2:2O14 KS EAS 817:2014 KS 2618:2016 KS 2586:2016 KS ISO 3925:2014 KS ISO 2919:2012 KS ISO 18188:2016 K5927:2O16 KS 1942:2016 KS223l:2016 K52639:2O16 KS 2637:2016 KS 2638:2016 Liquid soap Spccifi cation Oven cleaner and grease remover Spccification Carpet and upholstery shampoo -Specification Toilet cleansers Specification part l: Acidic liquid toilet cleanscrs Specification for folded continuous stationery for impact printcrs. Facial tissue paper - Spccification. Paper serviettes / napkins - Specification. Field and shorthand note books, writing pads and message pads- Specification Specification for toilet paper (Fourth Edition). Paper-towel rolls for centre-feed dispensing devices - Specification Carbonless copy paper Specification Spccification for trimmed sizes of paper for writing and printing Specification for base paper for waxed bread wrap. Specification for waxed paper for bread wrap. Specification for substance of paper and boards. Specification for base paper for carbon paper. Specification for carbon paper. Toilet paper - Specification. Rubber footwear - Vulcanized resin rubber and vulcanircd high-hardncss rubbcr soling materials - Spccification, Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification. Specification for ink paste - Black (stencil, duplicating-machine) Indelible ink - Specification - Part 1: Indelible ink for use on marking voters' fingen. lndelible ink - Specification - Part 2: Indelible ink for use on marking textile fabrics. Black finger printing ink - Specification. Waterproof drawing ink - Specification - Part 1: Black waterproof drawing ink for architectural, engineering and survey use. Waterproof drawing ink - Specifrcation - Part 2: Coloured waterproof drawing ink for architectural, engineering and survey use. Gallic acid for use in the ink industry - Specifrcation. Tannic acid for use in the ink industry - Specification. Numbering ink - Specification Black metal stamp ink - Specification Stencil correcting fluid - Specifrcation Dyes for water-based writing inks - Specification. Specification for Black Web Offset Ink Stamp pad ink - Specification Black letterpress ink - Specification - Part 1: Black letterpress ink for general purposes. Two-tone securiry ink (TISD - Specification Fountain pen inks - Specification Specification for printing inks for use on food wrappers, packagcs and reccptacles (Includes Amendment Slip No l:2005). Wax crayons for drawing- Spccification Fountain pen - Specification. Specification for graphite for black lead pencil . Specification for newsprint (Second Edition) Specifrcation for exercise books (Third Edition). Ball point pens - Specification - Part l: Gencral use (Second Edition). Specification for school chalks. Black lead pencil - Specification (Second Edition). Chemical used for Eeatment of water intended for human consumption - Part 4: Calcium hypochlorite (Second Edition). Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides - Specification. Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)\{polyDADMAC\} - Specification. Chemicals used for treatment of water intended fgr human consumption - Cationic polyacrylamidcs - Spccification. Specification for unsaturated polyester resin for body frllers. Specification for sunflower oil based long oil alkyd resin. Specification for sayabean oil based long oil alkyd resin. Specification for safflower oil based long oil alkyd resin. Specification for rubber-based adhesives for tyres and tubes - Part 1: Non-curing. Specifications for adhesives for use with ceramic tiles. Kcnya Standard - Synthetic detergent powders - Specification Part 2: Machinc wash, Second Edition Kenya Standard - Liquid hand wash - Specification - Part 1: Synthctic and combined (soap and synthetic) hand wash, Second Edition Kenya Standard - Soap noodles - Specification, Second Edition Kenya Standard - Synthetic liquid laundry detergents - Specification Part 1: Hand wash, Second Edition Kenya Standard - Synthetic liquid laundry detergents - Specification Part 2: Machine wash, Second Edition Kenya Standard - Stain remover for tableware - Specification, Second Edition Kenya Standard - Commercial stationery books - Specification, First Edition Kenya Standard - Jumbo tissue roll (plus size toilet paper ) - Specification, First Edition Kenya Standard - Unsealed radioactive substances - Identifrcation and documcntation, First Edition Kenya Standard - Radiological protection - Sealed radioactive sources - General requirements and classification, First Edition Kenya Standard - Specification of polypropylene drinking straws, First Edition Kenya Standard - Disinfecting general purpose liquid synthetic detergents - Specification, Second Edition Kenya Standard - Bathing bars - Specification, Second Edition Kenya Standard - Antibacterial bathing bars - Specification, Second Edition Kenya Standard - Copper sulphate - Specification, First Edition KS 2637:2016 Kenya Standard - Chlorine tablets - Specification, First Edition Kenya Standard - Stable bleaching powder - Specification, First Edition lTth November,2017 THE KENYA GAZETTE 5939 i KS 590:2016 KS 2635:2016 KS 2606:2016 KS EAS 750:2010 KS 1452-10:1999 KS 1452-2:1999 KS 1452-3:1999 KS 14524:1999 KS 1452-5:1999 KS 1452-6:L999 KS 1452-7:1999 KS 1494:2001 KS 1535-l:2000 KS 1535-2:200t) KS 1535-3:2000 KS 15354:2000 KS 1535-5:2000 KS 1535-6:2000 KS 1535-7:2000 KS 1535-8:2001 KS ISO 10293:1999 KS ISO 12543-l:1998 KS ISO 12543-3:1998 KS ISO 12543-4:1998 KS ISO 12543-5:1998 KS ISO 12543-6:1998 KS ISO 12944-1:1998 KS ISO 12944-2:1998 KS ISO 12944-3:1998 KS ISO 12944-4:1998 KS ISO 12944-5:2007 KS ISO 12944-6:1998 KS ISO 12944-7:1998 KS ISO l29zl4-8:1998 KS ISO 9882:1993 KS ISO 9883:1993 KS ISO 9699:1994 KS ISO 6241:1984 K52287-l:2Oll KS 1452-8:1999 KS 1452-9:2005 KS 450:1985 KS 100:1982 KS 769:1990 KS 624:1986 KS 1235:1994 KS ISO 9050:1999 KS ISO 10291:1999 KS ISO 9051:2001 KS 105:1982 KSEAS l8-1 and KS EAS 18-2 KS 682:1982 KSEAS 18-l and KS EAS 18.2 1725-l and2) KS l610:2000 KS 1256:1994 KS 774:2000 KS 443:1984 KS 18:2010 KS ISO 6934-2:1991 KS ISO 6934-3:1991 KS ISO 6934-4:1991 KS ISO 6934-1: 1991 KS ISO 15630-2:2002 Kenya Standard - Screw thread hnish glass bottle - Specification, Second Edition Kenya Standard - Retroreflective sheeting materials for number plates of motorized vehicles and trailers - Specification, Firs t Edition Kenya Standard - Globally Harmonized System of classification and labelling of chemicals (GHS), First Edition Air quality-Emissions to the air by cement factories guidelines Code of practice for road lighting - Part l0: Code of practice for lighting of motorways. Code of practice for road lighting - Part 2: Code of practice for lighting of trafflc routes. Code of practice for road lighting - Part 3: Code of practice for lighting subsidiary roads and associated pedestrian areas. Code of practice for road lighting - Part 4: Code of practice for lighting of single-level road junctions including roundabouts. Code of practice for road lighting - Part 5: Code of practice for lighting of grade - separated junctions. Code of practice for road lighting - Part 6: Code of practice for lighting of bridges and elevated roads. Code of practice for road lighting - Part 7: Code of practice for lighting of runnels and underpasses. Code of practice for storage and on-site treatment of solid waste from buildings. Glass for use in building - Part l: Definitions and general physical and mechanical properties. Glass for use in building - Part 2: Specification for float glass. Glass for use in building - Part 3: Specifrcation for polished wired glass. Glass for use in building - Part 4: Specification for drawn sheet glass. Glass for use in building - Part 5: Specification for pattemed glass. Glass for use in building - Part 6: Specification wired pattemed glass. Glass for use in building - Part 7: Specification for wired or unwired channel shaped glass. Glass for use in building - Pafl 8: Specification for safety glazing materials. Glass in building - Determination of steady-state U values (thermal transmittance) of multiple glazing - Heat flow metre method. Glass in building - Laminated glass and laminated safety glass - Part l: Definitions and descriptions of component parts. Glass in building - Laminated glass and laminated safety glass - Part 3: Lamihated glass. Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durabiliry. Glass in building - Laminated glass and laminated safety glass - Pa( 5: Dimensions and edge finishing. Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance. Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part l: General introduction. Paints and vamishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments. Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations. Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation. Paints and varnishes - Corrosion protection of steel sm,rctures by protective paint systems - Part 5: Protective paint systems. Paints and vamishes - Corrosion protection performance test methods. Paints and vamishes - Corrosion protection supervision of pa.int work. Paints and vamishes - Corrosion prctection of steel structures by protective paint systems - Part 8: Development of specifications for new work and mailtenance. Performance Standards in building - Performance test for precast concrete f loors - Behaviour under nonroncentrated 1oad. Performance Standards.in building - Performance test for precast concrete floors - Behaviour under concentrated load. Performance standards in buildings - Checklist for briefrng - Contents of brief for building design. Performance standards in buildings - Principles for their preparation and factors to be considered. Reuse of treated wastewater Specification :Part 1: Irrigation Road lighting - Part 8: Code of practice for lighting that may affect the safe use of aerodromes, railways, harbours and navigable inland waterways. Road lighting - Part 9: Code of practice for lighting of urban centres and public amenity areas (Second Edition). Specifrcation for asbestos-cement building and sanitary pipes. Specification for asbestos-cement comrgated sheets for roofing and cladding. Specification for bitumen road emulsions (anionic and cationic). Specification for bitumen roofing felts. Specification for concrete highway barriers. Specification for glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, and related glazing factors. Specification for glass in building - Determination of steady-state U values (thermal transmittance) of multiple glazng - Guarded hot plate method. Specification for glass in building - Glazed assemblies containing fre-resistant transparent or translucent glass, for use in building. Specification for hard drawn steel wire for reinforcement of concrete Specification for ordinary portland cement. Specification for oxidized (Brown) Bitumen adhesive for roofing purposes. Specification for Portland cement (ordinary and rapid hardening). Specification for portland-pozzolana cement. Specification for road marking materials - Drop on material - Glass beads, antiskid aggregates and mixtures of the two. Specifrcation for road retroreflective delineators for pavement application. Specification for road speed bumps. Specification for rolled asphalt (hot-process) for roads and other paved areas. Specification for steels for building and construction. Steel for the prestressing of concrete - Part 2: Cold-drawn wire. Steel for the prestressing of concrete - Part 3: Quenched and tempered wire. Steel for the prestressing of concrete - Part 4: Strand. Steel for the prestressing of concrete Part 1: General requirements AMMENDMENT I Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric. of steel structures by protective paint systems - Part 6: Laboratory of steel structures by protective paint systems - Part 7: Execution and KS ISO 15630-3:2002 KS ISO 6935-2:2007 KS ISO 2604-2:1975 KS ISO 2604-3: I 975 KS 828-l:2009 KS 1464-l:2010 KS 1464-2:2O10 KS 1464-3:2010 KS 1464-4:2010 KS 574:2015 KS ISO 15630-1:2010 KS ISO 15630-2:2010 KS 22:1990 KS 231:1980 KS 554:2004 KS COD STAN 240:2003 KS 1311:1996 KS 522-1 :1987 KS 522-2:198'7 KS 522-3:1987 KS ISO 5561:1990 KS EAS 174.,2007 KS EAS 28:2000 KS EAS 231:2OOl KS 616:2007 KS 172:2010 KS 230:1980 KS 2218:2010 KS COD STAN 62:1981 KS 1093:2008 KS EAS 743:2010 KS EAS'740:2010 KS EAS 741:2010 KS ISO 6574:1986 KS 1317:2007 KS ISO 10621:1997 KS ISO 972:1997 KS 618:2007 KS 436-l:2003 KS 436-2:2003 KS 436-2:2013 KS 429:2003 KS 1552:2000 KS l516:2000 KS3'7:1977 KS 1551-l-3::2001 KS CAC RCP 5l:2003 KS 458:2010 KS EAS 55:20O0 KS EAS 90:2000 KS ISO 10621:1997 KS ISO 5567:1982 KS ISO 5559:1995 KS EAS 58:2000 KS EAS'739:2010 KS ISO 5537:2004 KS ISO 2256:1984 KS 425:2010 KS ISO 6755:2001 KS ISO 7908:1991 KS EAS 49:200'1 KS EAS 44:1999 KS EAS 298:2002 KS EAS 321:2002 KS EAS 300:2O02 KS 340:2007 KS EAS 3O2:20O2 KS EAS 299:2013 KS 1991:2006 KS 1054-l:2008 KS 1054-2:2006 KS 232:2009 KS EAS 62-2:2O00 KS EAS 62-1:2O00 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel. Steel for the reinforcement of concrete - Pan 2: Ribbed bars- Steel products for pressure purposes - Quality requirements - Part 2: Wrought seamless tubes. Steel products for pressure purposes - Quality requirements - Part 3: Electric resistance and induction-welded tubes. Structural use of timber - Part l: Permissible stress design, materials and workmanship - Code of practice (Second Edition). Waste stabilization ponds - Code of practice - Part 1: Anaerobic type. Waste stabilization ponds - Code of practice - Pan2i Facultative type. Waste stabilization ponds - Code of practice - Part 3: Maturation type. Waste stabilization ponds - Code of practice - Part 4: Operation, maintenance, safety and monitoring Kenya Standard - Steel fabric for reinforcement of concrete - Specification, First Edition Kenya Standard - Steel for the reinforcement and prestrcssing of concrete - Test methods Part 1: Reinforcing Bars wire rod and wire, First Edition Kenya Standard - Steel for the reinforcement and prestressing of concrete - Test methods Part 2: Welded fabric, First Edition Kenya Standard specification for ho rolled mild steel bars for concrete reinforment of concrete. Aorubine (carmoisine), food grade - Spec;fi:::tion (First Edition). Apple frurtjuice preserved exclusively by physrcal means - Specification. Aqueous coconut products. Specrficatlon for canned beans in tomato sauce (Baked beans). Specification for canned fish - Part l: Fish canned in tomato sauce. Specification for canned fish - Part 2: Fish canned in brine. Specification for canned fish - Part 3: Fish canned in oil. Black caraway and blond caraway (Carumcarvil-inaeus), whole - Specification. Black currant conc€ntrate (preserved exclusively by physicaI means) - Specification. Black tea - Specification. Bone meal for compounding animal feeds - Specification. Brandy - Specihcation. Bread - Specification (Fourth Edition). Brilliant Blue, FCF, food grade - Specif,rcation (First Edition). Calcium nitrate fertilizer - Specification. Canned Strawberries. Cardamon powder - Specification (Second Edition). Cassava crisps - Specification. Cassava flour - Specification. Cassava wheat composite flour - Specification. Cclery seed (Apiumgraveolens Linnaeus) - Specification. Cereal based alcoholic bevcrages - Specification (Second Edition). Degydrated green pepper(piper nigrum L ) - Specification Chillies and capsicums, whole or ground ( powdered) - Specrf,rcation Cider and perry - Specification. Cocoa and cocoa products - Specification - Part 1: Unsweetened cocoa powder. Cocoa and cocoa products - Specification - Part 2: Cocoa-sugar mixtures. Cocoa powder-Specifi cation Code for marketing of breastmilk substitutes (Third Edition). Code of hygienic practice for production, handling and distribution of milk and milk products. Code of hygienic practice for the handling, processing, storage and the placing on the market of fish and fishery products (Second Edition). Code of hygienic practices rn the dairy industry for milk carriers. Code of practice for handling and distribution of fresh fruits and fresh fruit products. Code of practice for the prevention and reduction of mycotoxin contamrnation in cereals, including annexes on ochratoxinA, zearalenone, fumonisins and trichothecenes. Common salt and mineral supplements for livestock - Specification (Second Edition). Compounded pig feeds - Specification. Compounded poultry feeds - Specification. Degydrated green pepper(piper nigrum L ) - Specification Dehydrated garlic Determination of volatile organic sulphur compounds Dehydrated onion( Allium Cepa Linnaeus) - Specification Dog feeds - Specification. Dried cassava chips - Specification Dried milk - Determination of moisture content (Reference method). Dried mint (spearmint) (Menthaspicata Linnaeus syn. Menthaviridis Linnaeus) - Specification. Dried prawns (shrimps) - Specification (Second Edition). Dried sour cherries - Specification. Dried sweet cherries - Specification. Dried whole milk and skimmed milk powder - Specification. Dry milled maize meal products - Specifrcation. Edible cottonseed oil - Specification. Edible fats and oils (General) - Specification. Edible groundnut oil - Specification. Edible maize starch - Specification (Third Edition). Edible palm kemel oil - Specification. Edible sunfl ower oil-Specifi cation Electrolytic drinks - Specification. Energy drinks - Specification - Part l: Ready-to-drink energy drinks (Frfth Edition). Energy drinks - Specification - Part 2' Cereal malt extract based energy drinks (First Edition). Fat spread and blended spreads - Specification (Second Edition). Fish handling, processing and distribution - Code of practice - Part storage and placing of fish and fishery products. Fish handling, processing and distribution - Code of practice - Part 1: : 1: Code of hygiene for the handling, processing, Fresh fish handling and processing. i I lTth November,2OlT THE KENYA GAZETTE 5941 KS EAS'742:2010 Food grade cassava starch - Specification. KS I122:2007 Fortified wines - Specification. KS EAS'738:2010 Fresh sweetcassava - Spccification KS 1565:2010 Frozen fillets ofcuttle fish and tubes ofsquids - Specification (Second Edition). KS 1642:2010 Fmzen tuna loin - Specification (Second Edition). KS 611:2007 Fruit wines - Specification. KSCODSTAN146:1985 Generalstandardforthelabellingofandclaimsforpre-packagedfoodsforspecialdietaryuses. KS 614:2007 Gin - Specification. KS136:2007 Gradesofwheatgrain-Specification(SecondEdition). KS 552:2008 Grapefruitjuice preserved exclusively by physical mcans - Specification (Third Edition). KSEAS5T:2000 Groundnuts (peanuts) - Specification - Part l: Raw groundnuts for table use and for oil milling and - Part 2: Roasted groundnuts (peanuts). KS EAS 129:1999 Guide on essential requirements for storage of ccrcals and pulses. KS 1051:1997 Guide on the maximum limits of pesticidcs residues. KS CAC GL 23:1997 Guidelines for usc of nutrition claims KS 1931:2005 High protein mixes for use as food supplements - Specification. KS EAS 36:2000 Honey - Specification. KS 1758 -l:2015 Horticulture industry Code ofpractice Part 1: Floriculturc KS CODEX STAN 249 Instant noodles. KS ISO 6079:1990 Instant tea in solid form - Specification. KS COD STAN 94:1981 Kenya Codex specification for canned sardines and sardine-type products. KS CODEX STAN 147 Kenya Codex Standard for Cocoa butter confectionery. KS COD STAN I I l:198 I Kenya Codex Standard for quick frozen cauliflower. KS ISO 6576:2004 Laurel (l.aurusnobilis L) - whole and ground leaves - Specification. K52220:2010 Magnesiumsulphatefertilizers-Specification. KS EAS 230:2001 Maize bran as livestock feed - Specification. KS EAS 232:20{)l Maize gluten feed - Specification. KS EAS l4:2W Margarine - Specification. KS 610:2001 Methods of test for alcoholic beverages (wincs, spirits and brandies). KS 1074:2007 Millet flour - Specification (Second Edition). KS 157:2010 Monoammonium phosphate (MAP) and diammonium phosphate (DAP) fertilizers - Specification (4th Edition). KS226O:2010 Naturalcalciumphosphate(formanufacturcoffertilizer)-Specifibation KS 1930:2010 Nuuient-rich conccntrated foods - Specification (Second Edition). KS EAS 287:20O2 Oil-secd cakes for compounding livcstock fccds - Specification. KS EAS 233:2001 Ostrich fecd - Spccification. KS 524:2010 Pasta products - Spccification (Fourth Edition). KS 2062:2007 Pasteurized camel milk - Spccification. KS 1838:2006 Pineapple and passion fruitjuicc - Spccification. KS EAS 745l.2010 Potato crisps - Specification. KS CODEX STAN 54 Powdered dextrose (icing dexrose). KS CAC RCP 66:2008 Powdered formulae for infants and young children - Code of hygienic practice. KS COD STAN 36:1995 Quick frozen finfish, unevisceratcd and cviscerated - Specification. KS COD STAN 166:1995 Quick frozen fish sticks (fish fingers) and fish portions - breaded or in batter. KS COD STAN 191: 1995 Quick frozen raw squid - Specification. KS CAC RCP 25:1979 Recommended code of practice for smoked fish. KS 1701:2009 Refined white sugar - Specif,rcation (Third Edition) KS EAS 5:2009 Refined white sugar- Specification KS CODEX VOL 3:1995 Rcsidues of veterinary drugs in foods. KS1690:2010 Rockphosphatefertilizer-Specification. KS 615:2007 Rum- Specification (Second Edition). KS 2l5l:2008 Shelled ground nuts for oil milling - Specification. KS ISO 6479:1984 Shelled sweet kemels of apricots - Specification. KS 1715:2008 Smoked fish - Specification (Second Edition). KS 1932:2006 Sodium benzoate, food grade - Specification. KS 1073:2007 Sorghum flour- Specification (Second Edition). KS 2050:2007 Soy sauce - Specification. KS 2049:2007 Soya drink - Specification. AMENDMENT 1:2014 KS 287:2010 Specification for ammonium sulphate (sulphate of ammonia), fertilizer grade flhnd Edition), KS 428:1984 Specification for ascorbic acid, food grade. KS 225:1996 Specification for beer. KS 13 I 1:1996 Specification for canned beans in tomato sauce (Baked beans). KS 522-1:1987 Specification for canned fish - Part 1: Fish canned in tomato sauce. KS 522-2:1987 Specification for canned fish - Part 2: Fish canned in brine. KS 522-3:1987 Specifrcation forcanned hsh - Part 3: Fish canned in oil. KS 1 179:1996 Specification for canned fruit cocktail. KS I 177:1996 Specification for canned grapefruits. KS 342:1981 Specification for canned green beans and canned wax beans. KS 341:1980 Specification for canned green peas. KSl175:1994 Specificationforcannedguava. KS COD STAN 68:1981 Specification for canned mandarin oranges. KS 343:198 I Specification for canned mushrooms. KSl174:1996 Specificationforcannedpears. KSl173:1995 Specificationforcannedplums. KS COD STAN 18:1981 Specification for canned sweet com. KS l178:1995 Specificationforcannedtropicalfruitsalad. KS COD STAN 70:1995 Specification for canned tuna and bonito in water or oil. KSl550:1999 Specificationforcarbondioxideforcarbonationof-beverages KS 358:1999 Specification for carbonated and non-carbonated beverages (Second Edition). KS 1078:1990 Specificationforchillies KS 998:2008 Specification for chocolates (First Edition). KS 592:2000 Specification for cigarcttes (Second Edition). KS CODEX STAN63: 198 I Specification for concentrated apple juice preserved exclusively by physical means. KS COD STAN 83: l98l Specification for concentrated grape juice preserved exclusively by physical means. KS COD STAN 64:198 I Specification for concentrated orange juice preserfed exclusively by physical means. KS 1094-3:1997 Specification for Crisps - Part 3: Banana Crisps. KS 35:1999 Specif,rcation fordairy creamfordirectconsumption (SecondEdition). KS 36:1999 Specifrcation for dairy ice cream and milk ice (Second Edition). KS ISO 5560:1998 Specification for dehydrated garlic (Allium sativum L.). KS 435:.1992 Specification for dehydrated vegetables. KS 424:1986 Specification for dried salted fish. KS 459-9:1996 Specification for drinking water - Part 9: Code of hygienic practice for the collecting, processing and labellng of naoral mineral water, mineral water and bottled drinking water. KS 326-8:2003 Specifrcation foredible fats and oils - Part 8: Edible tallow (Third Revision). KS 1756:2001 Specification for flavoured milk KS 1367:1997 Specificationforfruitchutney. KS 1773:2003 Specification for fruit flavoured drink in solid form. KS 405-3:1993 Specification for fruit nectars preserved exclusively by physical means - Part 3: Specification for passion fruit nectar. KS 224:1999 Specification for fruit squashes (Second Edition). KS1090:1993 SpecificationforGlutenfreefoods. KS1172:1995 Specificationforgradingchickeneggs. KS 555:1985 Specification for grape juice preserved exclusively by physical means. KS 557:1985 Specification for guava nectar pr€served exclusively by physical means. KS 1772:2003 Specification for jelly powder and jelly crystals. KS 3 I 7-1:1 980 Specification for meat grades and meat cuts - Part 1: Beef grades and cuts, veal grades. KS 317 -2:1982 Specihcation for meat grades and meat cuts - Pafi2:Larrb, Mutton and Goat meat. KS 29:2001 Specification for milk powders and cream powders (Third Edition). KS 608:2001 Specification for neutral spirit for manufacture of alcoholic beverages (Second Edition). KS1041:1994 Specificationforopaquebeers. KS 1650:2000 SpecificationforOstrichfeed KS 703:1993 Specification for pasteurized reconstitut€d / recombined milk. KS 2243-l:2010 Specification for Puppy food-Part 1:Complete meal KSCODSTAN165:1995 Specificationforquickfrozenblocksofhshfillet,mincedfishfleshandmixturesoffilletsandmincedfishflesh. KS 1703:2001 Specification for ri* ,ug-. KS 693:2010 Specification for seeds for bulb vegetables. KS 690:2010 Specification for seeds for legumes. KS226l:2010 SiecificationforSinglesuperphosphatefertilizer(powder) KS 328-1&2:1999 Specification for soft fruit based soft drinks - Parts I and 2 (Second Edition) KS 1088-1:2001 Specification for soups and broths - Part l: Dehydrated soups (Second Edition). KSl121:1994 Specificationforsparklingwine. KS 609:1990 Specification for still grape table wines. KS 788:1987 Specification for strawberries. KS 283:2002 Specification for UHT milk (Second Edition). KS 1447:2001 Specification for unmalted beer. KS 2616:1996 Specification for wheat bran. KS 139:1993 Specifications for jams, jellies and marmalades. KS 1088-2:2001 Specifications for soups and broths - Part 2: Canned soups and brotlrs (Second Edition). KS 2150: 2008 Spiritbased ready to drink alcoholic beverage - Specification. KS COD STAN I 16: 1998 Standard for canned canots. KS COD STAN 90:1981 Standard for canned crab meat. KS COD STAN I 59: I 987 Standard for canned mangoes. KS CODEX STA 37:1981 Standard for canned shrimbs or prawns. KS COD STAN 96:1991 Standard for cooked cured ham. KS CODEX STAN 89 Standard for luncheon meat. KS COD STAN 180: 1991 Standard for the labelling of and claims for foods for special medical purposes. KS 1284:2008 Substitute vinegar - Specification (Second Edition). KS 319-4:2008 Sugar confectionery - Specification - Part 4: Other sugar confectionery products (Third Edition). KS EAS 35L2004 Toffee - Specification. KS 39-2:2006 Tomato products - Specification - Part 2: Preserved tomato (Third Edition) - KS 39-3:2N6 Tomalo products - Specifrcation - Part 3: Tomato concentrate (puree and paste) (Third Edition) KS EAS 66:2000 Tomato products - Specification - Parts l-4: Canned tomaloes lst edition). KS EAS 76l.2001 Tomato products - Test methods. KS 1839:2006 Tropical fruit drink - Specification. KS ISO 5565-1:199 Vanilla [Vanilla fragrans (Salisbury) Ames] - Part 1: Specification KS 613:2fi)7 Vodka - Specification (Second Edition). KS EAS 353:2N4 Wheat bran for animal feeds - Specification. KS 612:2007 Whisky - Specification (Third Edition). KS I 164:2007 Whole dried and ground paprika - Specification (Second Edition). KS22I9:201O Zinc sulphate fertilizer - Specification. KS EAS 352:2014 Chewing gum and bubble gum - Specification. (second edition) KS EAS 35O:2014 Hard-boiled sugarconfectionery - Specification (secondedition) KS EAS 349:2014 Liquid glucose (glucose syrup) - Specification. (second edition) KS 2193:2010 Mozzarclla cheese - Specification. KNWA2485:2013 coconutvinegar-specification KS 2376:2O12 Copper sulphate (penta hydrate) fertilizer- Specification KS 1159:2007 Whole dried and ground caraway seeds - Specification (Second Edition). KS 5 I :2013 Ammonium sulphate nitrate (ASN) fertilizer-Specification KS EAS 104:2014 and test. beverages - Methods of sampling lTth November,2OlT THE KENYA GAZETTE 5943 KS 2307:.20ll Animal casings- Specifications KS 1790:2015 Animal ghee - Specification. KS EAS 63:2O14 Beer -Specification KS EAS 781:2012 Biscuits- Specification KS EAS l'1:2O02 Black currantjuice (preserved exclusively by physical means)-Specification KS 65:2013 Black tea - Specification KS 2435:2013 Blended edible oils - Specification KS 786:2013 Blood Meal for compounding animal feeds- Specifrcation KS EAS L43.,2014 Brandy Spccification KS EAS 43:2012 Bread - Specification. KS 523-l:2007 Breakfast cereals - Specification - Part 1: Rolled / flaked oats (Quick-cooking type). , KS 523-2:2015 Breakfast cereals - Specification - Part 2: Flaked / puffed cereals (ready to eat). KS EAS 165:2013 Brown rice Specification KS EAS 749:2010 Brown sugars- Specifications KS I123:2007 Buns - Specification. KS EAS 22:2007 Butter - Specification. KS 1042:2007 Cakes - Specification (Second Edition). KS 47:2013 Calcium ammonium nitrate(CAN) fertilizer-Specification KS EAS 26:2N0 Canned comed beef - Specification. KS I 176:2008 Canned peaches - Specification (Second Edition). KS EAS 50:2000 Canned pineapples - Specification. KS EAS 149:2OO0 Carbon dioxide for beverage industry-Specification KS EAS 29:2000 Carbonated (beverages) soft drinks - Specification. KS ISO 882-l:1993 Cardamom [(Elettariacardamomum (Linnaeus) Maton var. minusculaBurkill)] - Specification Part 1: Whole capsules. KS ISO 882-2:1993 Cardamom [(Elettariacardamomum (Linnaeus) Maton var. minusculaBurkill)] - Specification Part 2: Seeds. KS 227-2:2014 Cashew kemels Specifrcation Part 2: Roasted cashew kemels KS 2063:2009 Cassava chips - Specification. KS 2064:2009 Cassavapellets - Specification. KS 2132-l:2008 Cat foods - Specification - Part 1: Complete meal. KS 28-1:2015 Cheese - Specification - Part 1: General requirements (3RD Edition). KS 28-3:2015 Cheese - Specification - Part 3: Gouda Cheese( 3rd Edition). KS 284:2015 Cheese - Specification - Part 4: TilsiteCheese(3rd Edition). KS 28-5:2015 Cheese - Specification - Part 5: Cottage cheese (3rd Edition). KS 28-2:2015 Cheese - Specification- Part 2: Cheddar 3RD Edition). KSISO6539:2014 Cinnamon(CinnamomumzeylanicumBlume)Specification KS ISO 2254;2004 Clove, whole and ground (powdered)-Specification KNWA 2488: 2013 Coconut milk and coconut cream- specification KNWA 2484: 2013 Coconut syrup( ngizi)- specification KS 1499:2012 Code ofpractice forprocessing, handling and distribution ofalcoholic beverages. KS CAC RCP 62:2006 Code of practice for the prevention and reduction of dioxin and dioxin-like PCB contamination in foods and feeds. KS222l:2oll Coffee packaging-specification KS EAS 782:2012 Composite flour-Specification KS 2427: 2014 Compound soluble fertilizer Specification KS 2451-l: 2015 Compounded catfish feeds- Specification Part 1: Complete feed KS 61:2009 Compoundedpoultry feeds - Specification (ThirdEdition). K52533:2014 CompoundedquailfeedsSpecification K52289-2:2O15 Compounded tilapia feeds Specification Part 2: Supplementary feed KS 2451-2:2015 Compounded Catfish Feeds - Specification Part 2: Supplementary Feed KS 661:2007 Cookies - Specifrcation (Second Edition). KS ISO 2255:1996 Coriander (CoriandrumSativum L.), whole dried and ground (powdered)-Specification KS 2541: 2014 Crude and semi refined crude palm oil products Specification KS ISO 2253:1999 Curry powder-Specification KS 2500:2014 Dairy cattle feed premix- Specification KS 62:2009 Dairy cattle feed supplements - Specification (Third Edition). KS EAS 7O:2O07 Dairy milk ices and dairy ice creams- specification KS EAS 820:2014 Dexffose monohydrate (glucose powder) - Specifrcation. KS 674-1:2008 Dog foods - Specification (Third Edition). KS ISO 7925:1999 Dried oregano (Origanum vulgare L.) - Whole or ground leaves - Specification KS 1470:2011 Dried rastrineobolaargentea (Omena/ Dagaa/ Mukene) KS ISO 11164:1995 Dried rosemary (Rosmarinus officinalis L.) - Specification KS ISO 1 1 165:1995 Dried sage (Salvia officinalis L.) - Specifigation. KS ISO I I 163:1995 Dried sweet basil (Ocimumbasilicum L.) - Specification. KS EAS 46:2013 Dry beans -Specification KS EAS 282:2002 Durum Wheat semolina KS EAS 3O4:2013 Edible corn oil-Specification KS 2544:2014 Edible egg albumen powder Specification K5326-ll:2O12 Edible fats and oils - Specification - Part 1l: Palm olein. K5326-12:2012 Edible fats and oils - Specifrcation -Part12: Palm stearin. KS 326-l:2009 Edible fats and oils - Specification - Parts 1: Animal fats and oils (Fourth Edition). KS 326-3:20O9 Edible fats and oils - Specification - Parts 3: Vegetable and animal ghee. KS 326-10:2003 Edible fats and oils-specification - Part l0: Rendercd pork fat KS EAS 799:2013 Edible tull fat soya flour Specification KS 229:20O9 Edible salt - Specification (Third Edition). KS 2460: 2014 Egg powder Specification KS 551:2012 Emulsified Sauces- Specification KS I 162:2008 Fenugreek seed powder - Specification (Second Edition). KS 941: 2014 Fermented (cultured) milk - Specification K52377:2O12 Ferrous sulphate ( hepta hydrate ) fertilizers- Specifrcation KS 2135 Finger millet - Specification. KS EAS 758:2013 Finger Millet grains -Specification KS EAS 97: 1999 Fishmeal - Specification KS 2469:2O13 Flavoured black tea- Specification KS 2228:2014 Foliar fertilizer (inorganic) Specification KS 2571: 2014 Food fortification premix Requirements for supply in Kcnya KS 1095:201I food seasoning mixtures -specification KS EAS '768:2O12 Fortified milled maize (corn) products - Specification. KS EAS '770:2012 Fortified sugar Specification KS EAS '767:2012 Fortified wheat flour - Specification. KS EAS 139:2014 Fortified wine - Specification KS 2580:201 5 Fruit-based soft drink with milk Specification KS 2432:2012 Garam masala- Specification KS 2431:2012 Garlic paste- Specihcation KS 2455:2013 General standard - Food safety KS 46:2012 Granulated superphosphate fertilizer- Specification KS 593:201 1 Green coffee bean specification- KS EAS 130:1999 Green coffee beans - Specification. KS ISO 7540:2006 Ground paprika (Capsicum annuum L.) - Specification. KS 1842:2006 Guava fruit &ink - Specifrcation. KS 146:201 1 Guidance standards on sto4gc ofcereals and pulses - Essential requirements KS 2305:2011 Ham- Specification KS EAS 779:2012 High quality cassava flour-Specification KS EAS 39:2000 Hygiene in the food and drink manufacturing indusrry - Code of practice. KS 2573:2015 Hygiene requirements in food service establishments and catering operations KS 2166:2009 Icing sugar - Specification. KS 384:1982 Indigo carmine, food grade colour - Specification (First Edition). KS EAS 4: 2013 Infantformula Specification KS2405:2015 Instanttea insolidformSpecification (secondedition) KS CODEX STAN 124 Kenya Codex Standard for edible coconut oil. KS CODEX STAN 26 Kenya Codex Standard for edible sesameseed oil. KS 2087:2009 Kenya pishori milled ricc - Specification (Second Edition). KS 1841:2006 Lime fruit drink - Specification. KS2l96:2012 Liqueurs- Specification KS 1835:2006 Litchi fruit drink - Specification. KS 868:2014 Macadamia kernels Specification K52423:2O12 Magnesium nitrate fertilizcr, tcchnical grade - Specification KS 2358:2012 Maize gluten meal - Specification KS EAS 2:2013 Maize grains -Specification KS 1753: 2014 Maize semolina Specification KS 1792- 1:2013 Malt-based cocoa products- Specification Part l: Granulated products. KS 1792-2:2O13 Malt-based cocoa products- Specification Part l: Granulated products KS 23'78:2012 Manganess sulphate (monohydrate ) fertilizer Specification KS 1836:2006 Mango fruit &ink - Specifrcation. KS EAS 52:2OOO Mango juicc preserved exclusively by physical means - Spccification. I *t CAC/IvIRL 2:201I Maximum reiiduc limits for veterinary drugs in food KS 838:2013 Meat and bone meal for compounding animal feeds- specification KS EAS 84-1 :2000 Meat grades and meat cuts - Specification - Pan 1: Beef grades and cuts, veal grades. KS 943:2013 Meat meal for compounding animal feeds-Specification KS2514:2013 Micronutrientpowder-Specification KS EAS 78:2000 Milk-based baLy foods - Specification. KS 2271:2011 Milled cercals and pulses products - Specification KS EAS 128:2013 Milled rice -Specification KS EAS 89:2011 Millet flour - Specification. KS 18z10:2006 Mixed berrics fruit drink - Specification. KS 938: 2014 Mixed nut kemels Specification K52424.,2O12 Monoammnium phosphate ( MAP)and diammonium phosphate ( DAP) FERTILITER, TECHNICAL GRADE- Specification K52426:.2012 Monopotassium phosphate fertilizer, tcchnical grade-Specification KS EAS 144:2014 Neutral spirit - Specification. KS ISO 3065:1974 Oil ofAustralian Eucalyptus,80 to 85 perccnt cineole content. KS ISO 3044:1997 Oil ofeucalyptus citriodora Hook. KS ISO 3054:1987 Oil of lavandinabrialis (lavandulaangustifolia P. Miller X l-avandulalatifolia (Linnacus f.) Mcdikus], Frrnce. KS ISO 3064:1977 Oil ofpetitgrain, paraguay. KS ISO 3043:1975 Oil of iimento berry. KS ISO 3033-l:20O5 Oil of spearmint - Part l: Native rype (Menthaspicata L.). KS EAS 6l:2014 Opaque beer -Specification. KS 1837:2006 Orangc and pineapple fruit juice - Specification. KS EAS 3'1:2OfJrO Orange juice preserved exclusively by physical means - Specification. KS 22X):?,0ll Organic fcrtilizer-Spccification KS EAS 153:2014 Packaged drinking water - Specification. KS EAS 13:2014 Packaged natural mineral water - Specifrcation. KS EAS 48:2000 Passion fruitjuicc preserved exclusively by physical means - Specification. KS EAS 69:.2OO7 Pasteurized milk - Specification. KS EAS 60:.2O13 Pcanut butter-Specification KS EAS 284:2O13 Pearl millet-Specification KS ISO 1 1 162:201I Peppercoms (piper nigrum) in brine- Specification and test methods KS 1097:2013 Pickles-specification KS 25zlo: 2014 Pig fced premixes Specification KS EAS l0:200O Pineapplejuice prcserved exclusively by physical means - Specification. KS EAS 16:2010 Plantation (mill) white sugar- Specification RS2L76:2OO9 Popcorn - Specification. lTth November,2Ol7 THE KENYA GAZETTE 5945 KS EAS 12:2014 KS 350:2013 K52425:2012 KS 351:2013 K52422:2012 KS 2508:2014 KS EAS 72:2013 KS 2509: 2014 KS 175:201I KS COD STAN I l2:1981 KS COD STAN 140:1983 KS COD STAN 104:1981 KS COD STAN '7'7:1981 KS COD STAN 52:.1981 KS EAS 8:2010 KS EAS 67:2007 KS 2061:2007 KS 2147:2007 KS CAC RCP 2:1969 KS CAC RCP 5:1971 KS CAC RCP 21:1979 KS CAC RCP 36:1999 KS 1089: 2014 KS 1052:2011 KS EAS 146:2014 KS 59-l:2014 KS 59-2:2014 KS 2306:2011 K52379:2012 K52375:2012 KS EAS 77-l:2000 KS EAS 77-2:2000 KS 158:2012 KS EAS 95:20ll KS EAS 800:2013 KS EAS 801:2013 KS EAS 140:2O74 KS 684:1988 KS 346:2000 KS 785:2012 KS 227-1:1980 KS 28-6:2015 KS 753:1989 KS 871-1:1992 KS 2289-1:2015 KS 1313:1997 KS 1398:2013 KS 17,10:2001 KS 1517:2013 KS 2310: 2012 KS 385: 1982 KS 1168:201I KS 1399-2:2012 KS 1399-l:2012 KS 1285:2012 KS 1486:2012 KS 1643:2012 KS 1485:2011 KS 405-l&2:1984 KS 954:2012 KS ISO 959-l:1998 KS COD STAN ll0:1981 KS COD STAN 41:1981 K52325:2O12 KS 949:1995 KS 2308:2012 KS ISO 3632-l:201 I KS COD STAN 129:1981 KS CODEX STAN I3O KS EAS 138:2014 KS 1483:2007 KS 330:1981 KS EAS 774:2O72 KS EAS 773:2012 Potable water - Specification. Potassium chloride (muriate of potash) fertilizer- specification Potassium nitrate fertilizer, technical grade -Specification Potassium sulphate (sulphate of potash) fertilizer grade-specification Potassium sulphate, technical grade- Specification Poultry feed premixes-Specification Processed cereal-based foods for infants and young children Specification Processed chcese Spccification pure instant coffee - specification Quick frozen Brussels sprouts. Quick frozen carrots. Quick frozen leek. Quick frozen spinach. Quick frozen strawberries. Raw cane sugar-Specifi cation Raw cow milk - Specification. Raw whole camel milk - Specification. Raw whole goat milk - Specification. Recommended intemational code of hygienic practice for canned fruit and vegetable prducts. Recommended intemational code of hygienic practice for dehydrated fruits and vegetables including edible fungi. Recommended intemational code of hygienic practice for food for infants and children. Recommended intemational code of practice for the storage and transport of edible fats and oils in bulk. Reduced salt-content foods - Specification Roasted coffee beans and roasted ground coffee- Specification Rum - Specification. Sausages Specification pt l: Raw or cooked red meat sausages Sausages Specification pt 2:Raw or cooked poultry sausages Smoked bacon(pork)-Specifi cation Sodium molybdate (Dihydrate) fertilizer-Specification Sodium tetra borate(borax) fertilizer-Specification Soft fruit juice - Specification - Part I : Soft drinks and fruit juice. Soft fruit juice - Specifioation - Part 2: Comminuted soft fruit drinks. Solid compound fertilizers - Specification. Sorghum fl our-Specifi cation Soya milk Specification Soya protein products Specifrcation Sparkling wine -Specifi cation Specification for bakers yeast. Specification for baking powder (First revision, 2000). Specification for bone meal Specihcation for cashew kemels. Specification for cheese - Part 6: Cream cheese (Rahmfrisckase). Specification for chilli sauce. Specification for compounded fish feeds - Part l: Trout feeds. Specification for compounded tilapia feeds Pan l: Complete feeds diet . Specrfication for desiccated coconut. Specifrcation for dressed poultry. Specification for dried mangoes. Specification for edible ices and ice mixes. Specification for edible meat co-products Specification for erythrosine,food grade colour Speciircation for food grade meat (beef ) extract Specification for fresh and frozen fin fish - Part 2: Fresh and frozen fish fillet (Third Edition). Specification for fresh fin fish - Part l: Fresh and frozen whole fish. Specification for fresh frozen prawns / shrimps. Specification for frozen lobsters. Specification for frozen octopus. Specifrcation for fruit flavoured drinks. Specification for fruit nectars preserved_exclusively by physical means - Part l: Mango nectar - Part 2 : Nectars of certain citrus fruits. Specification for maize gluten feed Specification for pepper - Paft l: Black pepper. Specification for quick frozen broccoli. Specification for quick frozen peas. Specification for rabbit feed supplement Specification for rice bran Specification for soup stock medium(bee0 Spices- Saffron (Crocus sativus L.) Part l: specification Standard for canned apricots. Standard for dried apricots. Still table wine - Specifrcation. Sugar cane jaggery - Specification. Sunset yellow, FCF, food grade-specification Sweet potato crisps-Specifi cation Sweet potato flour- Specification s946 THE KENYA GAZETTE 17th November,2OlT KS 80:1978 KS2l3l:2o12 KS 383:1982 KS 2128:2015 KS 1927:2012 Tea sacks - specification KS ISO 9884-1:1994 KS EAS 802:20t3 K52543:2014 KNWA 2192:2013 K52326:2011 KS EAS 27:2007 KS 2510: 2014 KS 288:2013 KS 2527:2O14 KS 2086:2009 KS 702:2008 KS EAS 797:2013 KS EAS 142:2014 KS 1270:2007 KS EAS 57t20r3 KS EAS l4l:2014 KS 1155:2008 KS 1160:2007 KS 1154:1996 KS 1163:2007 KS 1092:2006 KS EAS 352:2O14 KS EAS 818 :2014 KS EAS 819:20t4 KS CODEX STAN 33 KS 2l9l:2016 KS 2193:2016 KS CAC/RCP 59:2010 KS 2218:2016 KS2219:2016 KS2220:2O16 K52228:2016 K52425:2016 KS 458:2016 K52263:2016 KS 2264:2O16 K52265:2016 K52430:2012 KS 2640:2016 KS 1758-2:2016 K52657:2016 K52260:2016 KS226l:2016 KS226l:2O16 KS ISO 17323:2015 KS 219l:2010 KS ISO 4250-l:2006 KS ISO 6182-7:2004 KS 9-3:20O9 KS ISO 8442-1:1997 KS 1006:1999 KS ISO 13341:1997 KS ISO 7176-8:1998 K52232:2OlO KS ISO TS 28923:2O12 KS ISO TS 28924:2007 KSISO 4254-12:2O12 KSISO 4254-13:2O12 KS ISO 4254-10:2009 KS ISO 4254-5:2008 KS ISO 4254-9:2008 KS ISO 4254-8:2009 KS ISO 4254-l l:2010 KS ISO 4254-7:2008 KS ISO 4254-1:2008 KS ISO 4254-6:2009 KS ISO 500-l:20O4 KS ISO 789-4:1986 Synthetic food colour preparations and mixtures- specification Tamarind concentrate Specifi cation Tartrazine, food grade - Specification (First Edition). Tea industry - Code of practice (Third Edition). Tea packets and containers - Specification, Part 2: performance specification for sacks for palletized and containerised transport of tea Tea sacks specification - Part 1 : Reference sack for palletized and containerized transport of tea. Textured soya protein prodtrcts Specification The animal feed industry - Code of practice Toddy(palm wrne)- Speciircation Traditional spirit(Chan g'aa)-Specifi cation UHT milk- Specification Unsweetened condensed milk Specification Urea fertilizer grade-Specification Urea phosphate fertilizer -Specification Variety blend milled rice - Specifrcation (Third Edition). Vinegar - Specification. Vitamin and mineral food supplements -Requirements Vodka - Specification. Wafers - Specification (Second Edition). Wheat grains- Specification Whisky - Specification. Whole and ground nutmeg - Specification (Second Edition). Whole dried and ground cumin - Specification (Second Edition). Whole dried and ground ginger - Specification (Second Edition). Whole dried and ground thyme - Specification (Second Edition). Whole turmeric rhizomes - Specification (Second Edition). Specification for sugar confectionery - Part 3: Chewing gum and bubble gum (Third Edition) Sugarcane jaggery -specification (First edition) Molasses Specifrcation - Fist edition Standard for olive oils and olive pomace oils, First Edition Pasteurized goat milk - Specification, Second Edition Mozzarella cheese - Specification, Second Edition Code of practice for the prevention and reduction of aflatoxin contamination in tree nuts, First Edition Calcium nitrate fertilizer - Specification, First Edition Zinc sulphate fertilizer - Specification, First Edition Magnesium sulphate fertilizer - Specification, First Edition Foliar fertilizer - Specification, First Edition Potassium nitrate feftrlizer - Speciircation, First Edition Common salt and mineral supplements - Specification, Fourth Edition Kenya Standard -Bay leaf - Specification, Second Edition Kenya Standard -Parsley -Specification, Second Edition 3 Kenya Standard -Mixed herbs - Specification, Second Edition Ginger paste-specification (Fint edition) Kenya Standard - Fruits and nectars - Specif,rcation, First Edition Kenya Standard - Horticulture industry code ofpractice Part 2: Fruits and vegetables, First Edition Kenya Standard - Warehouse and warehousing for bagged storage Edition of cereals and pulses - Requirements, First Kenya Standard - Natural calcium phosphate for manufacture of fertilizer - Specification, Second Edition Kenya Standard - Single superphosphate (powder) fertilizer - Specification, Second Edition Kenya Standard - Single superphosphate (powder) fertilizer -Specification, Second Edition Kenya Standard - Fertihzers and soil conditioners - Sulfur Coated Urea (SCU) - General requirements, First Edition Pasteurized goat milk - Specification. Earth-mover ryres and rims - Part 1: Tyre designation and dimensions. Fire protection - Automatic Sprinkler Systems - Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers. Gas cylinders - Refrllable welded low carbon cylinders for liquefied petroleum gass (LPC}) exceeding s-Litres water capacity - Part 3: Code of practice for frlling, distribution and retailing of liquef Materials and articles in contact with foodstuffs - Cutlery and table hollowware - Part l: Requirements for cutlery for the Preparation of food. Recommendations for buildlngs and facilities for the physically handicapped. Transportable gas cylinders - Fitting of valves to gas cylinders. Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths. Adjustable metal axillary crutches - Specification Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool Agricultural machinery - Guards for moving parts of power transmission - Guard opening without tool. Agricultural Machinery - Safety Part 12: Rotary disc and drum mowers and flail mowers Agriculnrral machinery - Safety Part l3:Large rotary mowers Agricultural machinery- Safety- Part l0: Rotary tedders and rakes Agricultural machinery- Safety- Part 5:Power-driven soil-working machines Agricultural machinery- Safety- Part 9:Seed drills Agricultural machinery- Safety-Part 8: Solid fertilizer distributors Agricultural machinery-Safety- Part I l: Pick-up balers Agriculflrral machinery-Safety - safety - Part 7: Combine harvesters, forage and cotton hawesters. Agricultural machinery-Safety- Part: I General requirements Agricultural machinery-Safety-Part 6: Sprayers and liquid fertilizer distributors Agricultural tractors - Rear-mounted power take-off types l, 2 and 3 - Part l: General specifrcations, safety requirements, dimensions for master shield and clearance zone. Agricultural tractors - test procedures - Part 4: measurement of exhaust smoke. THE KENYA GAZETTE 594',7 KS ISO 24347:2005 Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of ball-type couphng device (80 mm). KS ISO 3324-1:1997 Aircraft tyres and rims - Part 1: Specifications. KS 1666:2001 Alarm systems for road vehicles - Passenger cars. KS ISO 13770:1997 Aluminrum alloy gas cylinders Operational requirements for avoidance of neck and shoulder cracks. KS 476- I :2015 Aluminium hollowware utensils - Specificatron - Part l: Sufurias and lids (4th Edition). KS 2055- I :2007 Aluminium kettles and tea pots for domestic use - Specificatron - Pat 1 : Aluminium kettles. KS 2O55-2:20O"1 Aluminium kettles and tea pots for domestic use - Specificatron - Pat 2: Aluminium tea pots. KS EAS l'16-l:2007 Aluminrum hollowware uncoated utensils - Specification - Part l: Sufurias and lids. KS EAS l'16-2:2007 Aluminrum hollowware uncoated utensils - Specification - Part 2: Uncoated aluminium pans. KS EAS 465:2007 Anchorages for automobile seat belts - Specification. KS ISO 13064-l:2012 Battery-elecmc mopeds and motorcycles Performance Part 1: Reference energy consumption and range . KS ISO 5775- I : I 997 Bicycle tyres and rims - Part 1: Tyre designations and dimensions. KS EAS 4'7 4-l:2008 Bicycle tyres and rims - Part I :Tyre designations and dimensions. KS ISO 5775-2:1996 Bicycle tyres and rims - Part 2: Rims. KS 1814- l:2014 Biomass stoves - Performance requirements and test methods - Part 1 : Household biomass stoves. KS ISO 16528-1:2007 Boilers and pressure vessels - Part 1: Performance requirements. KS l44l:2005 Boiling bumers - Commercial boiling bumers for use with liquified petroleum gas - Specification. KS ISO 888:1976 Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts. KS ISO 21542:201 1 Building construction-accessibility and usability of the burlt environment. KS ISO 4437:2007 Buned polythene (PE) pipes for the supply ofgaseous fuels -metric series -specification KS ISO 7643:1991 Caravans and light trailers - Trailers of categories 01, and 02. with ovemm brakes - Linear bench test methods for brake controls. KS ISO 7642:1991 Caravans and light trailers - Trailers of categories 01 and 02 with ovem.rn brakes - Inertia bench test methods for brakes. KS 2410:2012 Chlorinated poly (Vmyl chloride) (CPVC) plastic pipes for portable hot and cold water distribution systems - Specification KS 15l5:2000 Code ofpractice for inspection ofroad vehicles. KS 9-2:2006 Code of practice for safe use of liquefred petroleum gas (LPG) in permanent dwellings. KS ISO 5941:1979 Compressors, pneumatic tools and machines - Preferred pressures. KS ISO 12480-1:1997 Cranes - Safe use - Part 1: General. KS ISO 3807-1:2000 Cylinders for acetylene - Basic requirements - Part 1: Cylinders without fusible plugs. KS ISO 3807-2:2000 Cylinders for acetylene - Basic requirements - Part 2: Cyhnders with fusible plugs. KS EAS 442-2:2007 Earth-mover tyres and rims - Part 2: Loads and inflation pressures. KS ISO 4250-3:2006 Earth-mover tyres and rims - Part 3: Rims. KS ISO 347 l:1994 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements. KS 2080:2007 Elastometric seals for joints in pipe work and pipelines - Specification. KS ISO 18275:2011 electrodes for manual metal arc welding of high-strength steels Classification KS EAS 159:2000 Engrne oils - Specrfication. KS ISO 6182-l:2004 Fire protection - Automatic Sprinkler Systems - Part l: Requirements and test methods for spnnklers. KS ISO 6182-l l:2003 Fire protection - Automatic Sprinkler Systems - Part I 1: Requirements and test methods for pipe hangers. KS ISO 6182-3:1993 Fire protection - Automatic Sprinkler Systems - Part 3: Requirements and test methods for dry pipe valves. KS ISO 6182-4:1993 Fire protection - Automatic Sprinkler Systems - Part 4: Requirements and test methods for quick-opening devices. KS ISO 6182-5:1995 Fire protection - Automatic Sprinkler Systems - Paft 5: Requirements and test methods for deluge valves. KS ISO I 1602-1:2000 Fire protection - Portable and wheeled fire extinguishers - Part l: Selection and installation. KS ISO 1 1602-2:2000 Fire protection - Portable and wheeled fire extinguishers - Part 2: Inspection and maintenance. KS 2175:2015 Firefighting equipment - Components of underground and aboveground hydrant systems - Specification. KS ISO 1 151- 1 :1988 Flight dynamics - Concepts, quantities and symbols - Part I : Aircraft motion relative to the air. KSISO 1151-2:1985 Flight dynamics - Concepts, quantities and symbols -Part2: Motions of the aircraft and the atmosphere relative to the Earth. KS EAS l8l:2007 Fuel tank assembly for automotive vehicles - Safety requirements. KS EAS 1 1:2008 Galvanized plain and comrgated steel sheets - Specification. KS ISO I 1439:2013 Gas cylinder-High pressute cylinders for the on-board storage of natural gas as a fuel for automotive vehicles KS ISO I 1622:2005 Gas cylinders - Conditions for filling gas cylinders. KS ISO 2443 1 :2006 Gas cylinders - Cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling. KS ISO 7225:2005 Gas cylinders - Precautionary labels. KS ISO 1 1 62 1 :1 997 Gas cylinders - Procedures for change of gas service. K52024:2006 Gas cylinders - Refillable welded steel cylinders for hquefied petroleum gas (LPG) - Procedures for checking before, during and after filling. KS ISO 11625:1998 Gas cylinders - safe handling. KS ISO 3500:2005 Gas cylinders - Seamless steel CO2 cylinders for fixed fire-fighting installations on ships. KS ISO 6406:2005 Gas cylinders - Seamless steel gas cylinders - Periodic inspection and testing. KS ISO 15995:2006 Gas cylinders - Specifications and testing ofLPG cylinder valves - Manually operated. KS ISO 14245:2006 Gas cylinders - Specifications and testing ofLPG cylinder valves - Self-closing. KS ISO 13341:2010 Gas cylinders-Fitting ofvalves to gas cylinders KS ISO 25760:2009 Gas cylinders-Operational procedures for the save removal of valves from gas cylinders KSISO11119-3:2013 Gas cylinders-Refillable composite gas cylinders and tubes Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 L with nonload-sharing metallin or non-metallic li KS ISO 9809-3:2010 Gas cylinders-Refrllable seamless steel gas cylinders-Design, construction and testing Part 3:Normalized steel cylinders KS ISO 18172-1:2007 Gas cylinders-Refillable welded stainless steel cylinders Part l:Test pressure 6Mpa and below KS ISO 18172-2:2007 Gas cylinders-Refillable welded stainless steel cylinders Part 2: Test pressure greater than 6M pa KS 1959:2006 Gas lamp - Specification. KS 1440:2005 Gas ovens - Domestic gas ovens for use with liquifred petroleum gas - Specifrcation. KS ISO 5171:2009 Gas welding equipment - Pressure gauges used in welding, cutting and allied processes. KS ISO 2503:2009 Gas welding equipment - pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa). KS ISO l4l13:2007 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPU) KS ISO 3821:2008 Gas welding equipment - Rubber hoses for welding, cutting and allied processes. KS ISO 14520-1:2006 Gaseous fre-extinguishing systems - Physical properties and system design - Part 1: General requirements. [7th November,2017 KS 1938-4:2012 KS 1938-5:2005 KS 2498:2013 KS 2003:2006 KSISO 10500:1991 KS ISO 3739-1:2007 KS EAS 444-l:200'7 KS ISO 3739-2:1992 KS EAS 444-2:20O7 KS EAS 444-3:2007 KS ISO 10499-2:1998 KS ISO 10499-1:1991 KS EAS 445-2:2OO7 KS 2223:2010 KS ISO 8442-2:1997 KS ISO 8442-3:1997 KS ISO 8442-4:1998 KS ISO 8442-5:2004 KS ISO 8442-6:2000 KS ISO 8442-8:2000 KS 2233:2010 KS 783-3:1990 KS 783-4:1989 KS 783-5:1990 KS 783-6:1990 KS 2505:2013 KS ISO 1452-1:2009 KS ISO 14313:1999 KS ISO 15649: 2001 KS ISO 3183:2007 KS 2506:2014 KS ISO I 1299- l:201 I K52420-3:2012 K52420-2:2O12 K52420-4:2012 K52420-5:2O12 KS ISO 6808:2014 KS ISO TS 18226:2O06 KS ISO 4427-1:2007 KSISO 4427-2:2007 KS ISO 4427-3:2007 KS ISO 4427-5:2007 KS ISO 22391-2:2007 KS ISO 22391-3:2007 KS ISO 22391-5:2007 KS ISO 15874-l:2003 KS ISO 15874-2:2003 KS ISO 15874-3:2003 KS ISO 15874-5:2003 KS ISO 15874-7:2003 KS ISO 15875-l: 2003 KS ISO 15875-2: 2003 KS ISO 15875-3: 2003 KS ISO 15875-5: 2003 KS ISO 15877-7:2009 KS ISO 8773:2006 KS ISO 21 138-1: 2007 Handling, storage and distribution of liquefied p€troleum gas in domestic, cornmercial and industrial installations - Code of practrce - Part 4: Storage and frlling sites for refillable liquefied petro Handling, storage and distribution of liquefied petroleum gas in domestic, commercia.l and industrial installations - Code of practice - Part 5: Fuelling of forklift trucks and other gas operated vehicle High pressure regulator for use with liquefied petroleum gas- Specification Hose-reel for firefighting (for fixed installations) - Specification. Industrial tyres and rims - Cylindrical and conical base rubber solid tyres (metric series) - Designation, dimensions and marking. Industrial tyres and rims - Part 1: Pneumatic tyres (metric senes) on 5 degree tapered or flat base rims - drmensrons and marking. Industrial tyres and rims - Part 1: Pneumatic tyres (metric senes) on 50 tapered or flat base rims - dimensions and marking. Industrial tyres and rims - Part 2: Pneumatic tyres (metric series) on 5 degree tapered or flat base rims - Load ratings. Industrial tyres and rims - Part 2: Pneumatic tyres (metric series) on 5apered or flat base rims - Load ratings. Industrial tyres and rims - Part 3: Rims. lndustrial tyres and rims - Rubber solid tyres (metric series) for pneumatic tyre rims - Part 2: Load ratings. Industrial tyres and rims - Solid tyres (:n:lrlc series) for pneumatic tyre rims - Part l: Designation, dimensions and marking. lndustrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 2: Load ratings. Inspection and testing of LPG road tankers. Materials and articles in contact with foodstuffs - Cutlery and table hollowware - Part 2: Requirements for stainless steel and silver-plated cutlery. Materials and articles in contact with foodstuffs - table and decorative holloware. Materials and articles in contact with foodstuffs - cutlery. Materials and articles in contact with foodstuffs - edge retention test of cutlery. Materials and articles in contact with foodstuffs hollowware protected by lacquer. Cutlery and table hollowware - Part 3: Requirements for silver-plated Cutlery and table hollowware - Part 4: Requirements for gold-plated Cutlery and table hollowware - Part 5: Specification for sharpness and - cutlery and table hollowware - Part 6: Lightly silver-plated table Materials and afticles in contact with foodstuffs - cutlery and table hollowware - Part 8: Requirements for silver tablc and decorative hollowware. Metal elbow crutches - specification Method of test for gasket materials - Part 3: Tension testing of non-metallic gasket materials. Method of test for gasket materials - Part 4: Sealability of enveloped gaskets. Method of test for gasket materials - Part 5: Creep relaxation of a gasket material. Method of test for gasket materials - Part 6: Fluid resistance or gasket materials. Mountable bumer for use with liquefied peEoleum gas-Specification Part 1: General Systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves. Petroleum and natural gas industries - Piping. Petroleum and natural gas industries - Steel pipe for pipeline transportatron systems. Petroleum facilities Retail and consumer outlets Specification Plastic piping systems for renovation of underground gas supply networks part l:general Plastic piping systems for the supply of gaseous fuels- Polyethylene ( PE) Part 3: Fittings Plastic piping systems for the supply of gaseous fuels- Polyethylene (PE) Part 2: Pipes Plastic piping systems for the supply of gaseous fuels- Polyethylene (PE) Part 4: valves Plastrc piping systems for the supply of gaseous fuels- polyethylene (PE) Part 5: Fitness for purpose of the system Plastrcs hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification. Plastics prpes and frttings Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part l: General. Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes. Plastrcs prping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings. Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system. Plastrcs piping systems for hot and cold water installations - Polyethylene ofrarsed temperature resistance (PE-RT) - Pat 2: Pipes. Plastics piping systems for hot and cold water installations - Polyethylene ofrarsed temperature resistance (PE-RT) - Pat 3: Fittings. Plastrcs piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system. Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General. Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes. Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Pan 3: Frttrngs. Plastics piping systems for hot and cold water installatrons - Polypropylene (PP) - Part 5: Fitness for purpose of the system. Plastics piping systems for hot and cold water rnstallatlons - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part l: General Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 2: Pipes Plastics piping systems for hot and cold water lnstallatlons Crosslinked polyethylene (PE-X) Part 3: Fittings Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 5: Fitness for purpose of the system Plastics piping systems for hot and cold water installations-chlor.inated poly(vinyl chloride) (PVC-C).Part 7:Guidance for the assessment of conformity Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP). Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Designation, Designation, l lTth November,2017 THE KENYA GAZETTE 5949 KS ISO 2l 138-2: 2007 KS ISO 4435:2003 KS ISO 11299-3:2011 KS ISO I 1296-7:201I KSISO 11296-3:2009 KS ISO 11296-4:2009 KS242O-l:2O12 KS ISO 16486-2:2012 KS ISO16486-3:2012 KS ISO 16486-5:2012 KS ISO 16486-6:2012 KS ISO 1452-2:2fi)9 KS ISO 1452-3:2009 KS ISO 1452-4:2009 KS ISO 1452-5:2009 KS 2313:2011 KS 1557:2005 KS77:2012 KS ISO 1005-l: 1994 KS ISO 1005-3: 1982 KS ISO 1005-4: 1986 KS 1351:1997 KS ISO 5708:1983 KS EAS 53:2000 KS 1820:2005 KS 2180:2010 KS ISO 39001:2012 KS ISO 15500-19:2012 KS ISO 15484: 2008 KS ISO 3996:1995 KS ISO 7641-1:1983 KS ISO TR 4l 14:1979 KS ISO 15500-11:2001 KS ISO 15500-18:2012 KS ISO 15500-8:2001 KS ISO 4039-2:1998 KS ISO 15500-14:2012 KS ISO 15500-15:2001 KS ISO 15500-16:2012 KS ISO 15500-10:2001 KS ISO 15500-20:2007 KS ISO 15500-6:2012 KS ISO 15500-9:2012 KS ISO 15500-2:2012 KS ISO 15500-1:2000 KS ISO 155004:2012 KS ISO 15500-3:2012 KS ISO 15500-7:2002 K5294:2012 KS ISO 4020:2001 KS 460-2: I 983 KS 822:1987 KS 322:1983 KS ISO 6697:1994 KS 1226:1996 KS 1099:1992 KS 845:1989 KS 991:1996 KS 1384:1998 K5324:1982 KS 487:1987 KS 260:1981 KS 293:2010 Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Plastics piping systems for non-pressure underground drainage and sewerage- Unplasucized poly(vinyl chloride) (PVC- u) Plastics piping systems for renovatlon of udergrcund gas supply networks part 3:lining wrth-close- fit pipes Plastics piping systems for renovation of undergroud non-pressure drainage and sewarage networks- Part 7: Lining with spirally-wound pipes Plastics piping systems for renovation ofunderground non-pressure drainage and sewarage networks- Part 3: Lining with close-fit pipes Plastics piping systems for renovation ofunderground non-pressure drainage and sewarage networks- Part 4: Lining with cured-in-place pipes Plastics piping systems for the supply of gaseous fuels- Part l: General Plastics piping systems for the supply of gaseous fuels- Unplasticizes polyamide ( PA-U) piping systems with fusion jointing and mechanicaljointing Part 2: Pipes Plastics piping systems for the supply of gaseous fuels- Unplasticizes polyamide ( PA-U) piping systems with fusion jointing and mechanical jointing Part 3: Fittings Plastics piping systems for the supply of gaseous fuels- Unplasticizes polyamide ( PA-U) piping systems with fusion jointing and mechanical jointing Part 5: Fitness for purpose of the system Plastics piping systems for the supply of gaseous fuels- Unplasticizes polyamide ( PA-U) piping systems with fusion jointing and mechanical jointrng Part 6: Code of practice for design, handling and i Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticizedpoly(vinyl chloride) (PVC-U) - Part 2: Pipes. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticizedpoly(vinyl chloride) (PVC-U) - Part 3: Fittings. Plastics piping systems for water supply and for buried and above-ground drainage and serverage under pressure - Unplasticizedpoly(vinyl chloride) (PVC-U) - Part 4: Valves. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticizedpoly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system. Plastics piping systems for water supply- Unplasticizedpoly(vinyl chloride) (pvc-u) Pre-painted metal coatcd steel shcets and coils - Specification. Protective helmcts for motorcyclists-Specification Railway rolling stock material Part 1: Rough-rolled tyr€s for tractive and trailing stock - Technical delivery conditions. Railway rolling stock material Part 3: Axles for tractivc and trailing stock - Quality requirements. Railway rolling stock material Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock Quality requiremonts. Recommendations for safety requirements for fuel tank assembly of automotive vehicles. Refrigerated bulk milk tanks. Retreaded car and commercial vehicle tyres - Specification. Retro-reflective marking tapes for commercial vehicles and their trailers - Specification. Road tankers for petroleum-based flammable liquids - Specification. Road traffic safety (RTS) management systems-requirements with guidance for use Road vehicle- Compressed natural gas (CNG) fuel system components- Part 19:Fittings Road vehicles - Brake lining friction materials - Product definition and quality assurance. Road vehicles - Braking hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid. Road vehicles - Caravans and light trailers - Calculation of the mechanical strength of the drawbar - Part I : Steel drawbars. Road vehicles - Caravans and light trailers - Static load on ball couplings. Road vehicles - Compressed natural gas ( CNG) FUEL SYSTEM COMPONENTS- Part I l: Gas/air mixer Road vehicles - Compressed natural gas ( CNG) fuel system components- Part l8: Filter Road vehicles - Compressed natural gas (CNG) fuel system components-Part 8: hessure indicator Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface. Road vehicles- Compressed natural gas ( CNG) fuel system components- Part 14: Excess flow valve Road vehicles- Compressed natural gas ( CNG) fuel system components- Part 15: Gas-trght housing and ventilation hose Road vehicles- Compressed natural gas ( CNG) fuel system components- Part l6: Rigid fuel line in stainless steel Road vehicles- Compressed natural gas (CNG) fuel system components- Part 10: Gas-flow adjuster Road vehicles- Compressed natural gas (CNG) fuel system components- Part 20: Rigid fuet line in material other than stainless steel Road vehicles- Compressed natural gas (CNG) fuel system components- Part 6:Automatic valve Road vehicles- Compressed natural gas (CNG) fuel system components- Part 9:Pressurc regulator Road vehicles- Compressed natural gas (CNG) fuel system components- Part 2: Performance and general test methods Road vehicles- Compressed natural gas(CNG) fuel system components- Part 1: General requirements and requirements Road vehicles- Compressed natural gas(CNG) fuel system components- Part 3: Check valve Road vehicles- Compressed natural gas(CNG) fuel system components- Part 5: Manual cylinder valve Road vehicles- Compressed natural natural gas (CNG) fuel system components- Part 7: Gas injector Road vehicles-Air filters-specification Road vehicles-fuel filters for diesel engines-Test methods Specification for aluminium plate and sheet - Part 2: Uncoated aluminium plate, sheet and strip for hollow-ware cooking utensils. Specification for anchorages for seat belts - automobiles. Specification for covered electrodes for manual metal arc welding of mild steel and low alloy steel. Specification for Cycles - Hubs and free wheels assembly dimensions. Specifrcation for domestic cooking ranges for use with liquefied petroleum gases. Specification for engine oils. Specification for grooved pulleys for classical and narrow V belts. Specification for Hammer (Posho) mills. Specifrcation for hand tools for live working up to 1 000 V a.c and I 500 V d.c. Specifrcation for high pressure rubber water hoses. Specification for hose coupling for petrol, diesel and paraffin. Specification for laminatefl leaf springs for automobrles Specihcation for Oil filters KS 475:2001 KS 485:1985 KS 259:1998 KS 200-l:2002 KS 1350:1998 KS 840:1987 KS 701:1996 KS 476-2:198'1 KS 885:1995 KS 1938-3:2012 KS 1938-6:2012 KS 1967:2015 KS 1969:2013 KS ISO 8442-7:20fi) KS ISO I4246:2001 KS EAS 470:2008 KS EAS 449-r:200'7 KS EAS 449-2:20O7 KS ISO 10454:1999 KS ISO 4209-1:2001 KS ISO 4209-2:2001 KS ISO 4251-3:1994 KS ISO 4251- 1 :2005 KS EAS 443-2:2007 KS EAS 443-3:2007 KS ISO 10571:1995 KS 201:2010 KS ISO I I 199-l: 1999 KS ISO 1 1334-4:1999 KS2177:2009 K52224:2010 KS ISO 6520- I :2007 KS 1320:2010 KS ISO 7176-16:1997 KS ISo 7r76-21:2003 KS 1319:2010 KS ISO 14469-2:2007 KS ISO 14469-3:2006 KS ISO 14513:2006 KS ISO 14791:2000 KS 409:2008 KS EAS 154:2014 KS 2238:2010 KS 1620:2008 KS 1465:2005 KS ISO 6530 KS ISO 11612 KS 1533:1999 KS 1532-1:1999 K52245.2010 KS ISO 8191-1:1987 KS ISO 8191-2:1988 KS 2459: 2013 KS ISO 15025:2000 KS ISO 14460:1999 KS ISO 1 161 3:1999 KS ISO 15383:2001 KS ISO 10472-2:1997 KS ISO 10472-3:1997 KS ISO 10472-4:1997 KS ISO 10472-5:1997 KS ISO 8782-1:1998 KS ISO 8782-2:1998 KS ISO 8782-3:1998 KS ISO 8782-4:1998 KS ISO 8782-5:2000 KS ISO 8782-6:2000 KS ISO 8782-7:2000 Specification for pressure cookers . Specif,rcation for rubber hose for liquefied petroleum gases. Specif,rcation for steel pipes for water and gas suitable for screwing (Third Edition). Specification for storage tanks for petroleum industry - Part 1: Carbon steel welded horizontal cylindrical storage tanks (Second Edition). Specification for tow-rope assemblies for towing passenger cars and light vans. Specification for transportable acetylene containers. Specification for tyre valves. Specification for uncoated aluminium hollow-ware untensils - Part 2: Alumrnium pans. Specificatron for underground stopvalves for water services. The handling, storage, and distribution of liquefred petroleum gas in domestic, commercial, and industrial installations - Code of practrce - Part 3: Liquefied petroleum gas installatrons involving st The handling, storage, and distribution of liquefied petroleum gas in domestic, commercial, and industrial installations- Code ofpractice Part 6: Liquefied peftoleum gas installations involving gas The petroleum industry - Storage and distribution of petroleum products in above ground bulk installations. The Petroleum industry- The installation of underground storage tanks, pumps/dispensers and pipe work at service stations and consumer installations-Code of practice their alloys. articles in contact with foodstuffs - cutlery and table hollowware - Part'l: Requirements of table cutlery made of silver, other precious metals and Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections. Truck and bus tyres - Verifying tyre capabilities - Laboratory test methods. Truck and bus tyres and rims (metric series) - Part 1: Tyres. Truck and bus tyres and rims (metric series) - Part 2: Rims. Trucks and bus tyres - Verifying tyre capabilities. Trucks and bus tyres and nms (Metric series) - Part 1: Tyres. Trucks and bus tyres and rims (metric series) - Part 2: Rims. Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 1: Rims. Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 1: Tyre designation and dimensions, and approved rim contours. Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part2'. Tyre load ratings. Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 3: Rims. Tyres for mobrle cranes and similar specialized machines. Unified valve for liquefied petroleum gas cylinders - Specification (Fourth Edition) Walking aids manipulated by both arms Requirements and test methods Part 1: Walking frames Walking aids manipulated by one arm-requirements and test methods. Part 4:Walking sticks with three legs or more Weld mesh - Specification. Welded steel tanks for liquefied petroleum gas ( LPG ) - Road tankers - Design and manufacture Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding. Wheelchairs - Foldable and fixed wheelchairs - Specification (Second Edition). Wheelchairs - Pan 16: Resistance to ignition of upholstered parts - Requirements and test methods. Wheelchairs - Part 2l: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motonzed scooters. Wooden - Adjustable axillary crutches - Specification Kenya Standard - Road vehicles - Compressed natural gas (CNG) refuelling connector Pat 2: 20 MPa (200 bar) connector, size 2, First Edition Kenya Standard - Road vehicles - Compressed natural gas (CNG) refuelling connector Part 3: 25 MPa (250 bar) connector, Frst Edition Kenya Standard -Road vehicles - Pedestrian protection - Head impact test method, Fftst Edition Kenya Standard -Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test methods, Fist Edition Baby napkins - Specification (Third Edition). Baby napkins - Specification. Baby shawl - Specrfication Bathroom slippers - Specification (Second revision). Children's anoraks - Specification. Clothing for limited protection against dangerous liquid chemicals - Resistance to penetration - Marking. Clothing for protection against heat and flame - Test methods and performance requirements for heat-protective clothing. Code ofpractice for inspection and acceptance criteria for used footwear. Code of practice for inspection and acceptance criteria for used textile products (Mitumba) - Part I : Garments. Cotton ear buds - Specificatron Fumiture - Assessment of the ignitability of upholstered furniture - Part 1 : Ignition source : smouldering cigarette. Fumiture - Assessment of the ignitabrlity of upholstered furniture - Part 2: Ignition Source: match-flame equivalent. lrathers for Orthopeadic Use - Specif,rcation Protective clothing - Protection against heat and flame - Method of test for limited flame spread. Protectrve clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods. Protective clothing for frrefighters - Laboratory test methods and performance requirements. Protective gloves for fire fighters - Laboratory test methods and performance requirements. Safety requirements for industrial machinery - Part 2: Washing machines and washer-extractors. Safety requirements for industrial machinery - Part 3: Washing tunnel lines including component machines. Safety requirements for industrial machinery - Part 4: Air dryers. Safety requirements for industrial machinery - Part 5: Flatwork ironers, feeders and folders. Safety, protective and occupational footwear for professional use - Part 1: Requirements and test methods. Safety, protective and occupational footwear for professional use - Part 2: Specifications for safety footwear. Safety, protective and occupational footwear for professional use - Part 3: Specification for protective footwear. Safety, protective and occupational footwear for professional use - Part 4: Specification for occupational footwear. Safety, protective and occupational footwear for professional use - Part 5: Additional requirements and test methods. Safety, protective and occupational footwear for professional use - Part 6: Additional specifications for safety footwear. Safety, protective and occupational footwear for professional use - Part 7: Additional specifications for protective footwear. 17th November,2017 THE KENYA GAZETTE 595 r KS ISO 8782-8:2000 KS 507:2005 KS 638:1999 KS 639-1:1989 KS 1949:2005 KS 1076:1998 KS 1062:1991 KS 525:1984 KS 1534:2000 KS 1739-1:2005 KS I149:1995 KS 2286:201I K5944-2:2011 KS 544:1 985 KS 133:2013 KS 481:2000 KS 134:1981 KS 482: I 994 KS 944-1:201 I KS EAS 455:2007 KS EAS 156-1:2000 KS EAS 156-2:2OOO KS EAS 156-3:2000 KS 132:2013 KS 117-1:2007 KS 117-5:2008 KS 135:2008 KS 2339:2011 KS 1620:2016 KS IEC 61663-1:1999 KS IEC 61663-2:2001 KS IEC 62151:2001 KS 1107:1991 KSIEC60064:1993 KS 113:1978 KS 1747-l:2OO2 KS 1747-2:2OO2 KS 1747-3:2OO2 KS 174'7-5:2OO2 KS 1747-6:2OO2 KS l'747-7:2OO2 KS 1747-8:2002 KS 1747-9:2O02 KS 179-2:2001 KS 184-1:2011 KS 184-2:201I K52262:2010 K52446-l:2O13 K52446-2:2O13 K5244'1-l:2013 K5244'7-2:2013 K52448-l:2013 KS 306:1984 KS IEC 60598 KS 308:1982 KS 309-l:1985 KS 309-2:1985 KS 464:1998 KS 465:1984 KS 472:2001 KS 473:1983 KS 500:1985 KS 501:1985 KS 502-l:1985 KS 502-2:1985 KS 502-4:1985 KS EAS 16'7:2000 KS IEC 60064:1993 KS IEC 60238:2008 KS IEC 60400:2008 KS IEC 60432-1:1999 Safety, protective and occupational footwear for professional use - Part 8: Addrtional specifications occupational footwear. Sanitary towels - Specification (Fourth Edition). Specification for absorbent cotton gauze (Second Edition). Specification for bandages - Part 1: Cotton gauze bandages. Specifi cation for brassieres. Specification for fishing nets. Specification for infants outerwear garments. Specification for ladies knitted briefs. Specification for menstrual tampons. Specification for mosquito nets - Part l: Untreated nets (First Edition) Specification for optical performance of high-visibility garments and accessories for use on the highway. Specification for polyolefin sacks ( bags ) for maize meal Specif,rcatlon for woven bags (1007o sisal) for green tea leaves Part 2:Two-dimensional rype Specification for woven bags (natural fibre) for rice. Specrfication for woven bags (Natural fibres) for milled products. Specifrcation for woven bags (nan:ral fibres) for seeds (Second Edition). Specification for woven bags (nanrral fibres) for sugar. Specification for woven bags (polypropylene) for seeds. Specification for woven bags(1007o sisal) for green tea leaves .Part 1: Three-dimensional type Textiles - Specification for mosquito nets. Woven bags from natural fibres - Specrfication - Part 1: Woven bags for cereals. Woven bags from natural fibres - Specification - Part 2: Woven bags for milled products. Woven bags from natural fibres - Specifrcation - Part 3: Woven bags for sugar. Woven bags made from natural fibres for cereals and pulses - Specification (Fourth Edition). Woven blankets - Speciircation - Part 1: Blankets made from mixed fibres. Woven blankets - Specification - Part 5: Blankets made from acrylic fibres (Second Editiort). Woven polyolefin sacks (bags) for sugar - Specification (Third Edition). Woven polyolefin sacks for packing cereals and pulses-Specification Kenya Standard - Bathroom slippers - Specification, Third Edition Lightning protection - Telecommunication lines - Part 1: Fibre optic installations. Lightning protection - Telecommunication lines - Part 1: Lines using metallic conductors. Safety of equipment electrically connected to a telecommunication network. Specification for 2-pin reversible plug and shaver socket-outlets. Specilrcation for tungesten hlament lamps for general service (Amendment No. 1: 1983; Amendment No.2: 1986) Specification for visual indicator lamps. Specification for lighting columns - Part 1: Definitions and terms. Specrficatron for lighting columns - Part 2: Definitions and tolerances. Specification for lighting columns - Part 3: Specification for materials and welding requirements. Specification for lighting columns - Part 5: Specifrcation for base compartments and cableways. Specification for lighting columns - Part 6: Specification for design loads. Specification for lighting columns - Part 7: Method for verification of structural design by calculation. Specification for lighting columns - Part 8: Method for verification of structural design by testing. Specification for lighting columns - Part 9: Special requirements for reinforced and prestressed concrete lightrng columns. Non-metallic conduits and fittings for electrical wiring - Part2: Specification for httrngs (Third Edition). Primary batteries - Specification - Part 1: General Primary batteries - Specification - Part 2: Physical and electrical specifications Fluorescent lamps and other lamps containing mercury - Specifications and disposal requirements Self ballasted lamps for general lighting services Part I : Minimum energy performance standards ( MEPS) requirements. Self ballasted lamps for general lighting services Part 2: test methods- Energy performance Performance of electrical lighting equipment- Ballasts for fluorescent lamps Part I : Energy labeling and minimum energy performance standards requirements. ballast-lamp circuitscal lighting equipment- Ballasts for fluorescent lamps Part 2: Method of measurement to determine energy consumption and performance of double-capped flourescent lamps-performance specification-minimum energy performance standards(MEPS) Specification for ballast for use in fluorescent lamps. Specification for luminaires. Specificatron for ceiling roses. Specification for lampholders - Part l: Bayonet lampholders. Specification for lampholders - Part 2: Edison screw. Specification for tubular fluorescent lamps. Specification for electric soldering irons. Specification for lampholders for tubular fluorescent lamps and starterholders (Second Edition). Specification for starters for fluorescent lamps. Specification for filament lamps for road vehicles. Specification for tungsten filament electric lamps for railway rolling stock. Specification for emergency lighting equipment - Part 1: Central battery systems, slave luminaires and associated equipment. Specification for emergency lightrng equipment - Part 2: Self contained luminaires and associated equipments. Code of practice for emergency lighting of premises. Tungsten lamps for general lighting service - Specification. Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements. Edison screw lampholders. Lampholders for tubular fluorescent lamps and starter holders. Incandescent lamps - Safety specrfications - Part l: Tungsten filament lamps for domestic and slmrlar general lighting purposes. KS IEC 60432-2:1999 Incandescent purposes. KS IEC 60598- l:1999 Luminaires - lamps - Safety specifications - Parl2: Tungsten halogen lamps for domestic and similar general lighting Part 1: General requirements and tests. 59s2 THE KENYA GAZETTE lTth November,2017 I KS IEC 60921:2006 KS IEC 60924:1990 KS IEC 60925:1989 KS IEC 60968:1999 KS IEC 60969:2001 KS IEC 61184:2008 KS IEC 62031:2008 KS IEC60598-2-1:1997 KS IEC60598-2-2:1997 KS I8C60598-2-3:2002 KS I8C60598-2-4:1997 KS IEC60598-2-5:1998 KS IEC60598-2-6:1996 KS IEC60598-2-7:1994 KS IEC60598-2-8:2001 KS IEC60598-2-9:1993 KS IECPAS 62612:2009 KSIEC60598-2-10:2003 KSIEC60598-2-17:1990 KSIEC60598-2-1 8:1 993 KSIEC60598-2-19:1997 KSIEC60598-2-20:2002 KSIEC60598-2-22:1997 KSIEC60598-2-23:200 1 KSIEC60598-2-24:1997 KSIEC60598-2-25:1994 KS 1068-3:2013 KS 1068-4:2013 KS 1068-6:2013 KS 1624:2000 KS 1876-2:2010 KS 1877:2010 KS 1878-0:2010 KS 1878-l:2010 KS 1878-2-3:2010 KS 1878-3:2010 KS 1883:2010 KS 1902:2010 KS 1917:2010 KS 2236-1:2010 KS 2236-2:2O10 KS 2236-3:2O10 K52236-4:2010 KS 1624:200O KS EAS 371-2:2005 KS EAS 378-1:2005 KS IEC 60947-2:1996 KS EAS 378-3:2005 KS EAS 378-4-l:2005 KS IEC(>09 47 - 4 -2 :2Il 1 1 KS IEC60947-4-3:Dl4 KS EAS 378-5-l:2005 KS EAS 378-5-3:2N5 KS EAS 378-5-5:2005 KS EAS 378-5-6:2ffi5 KS EAS 378-5-7:20O5 KS IEC 44-6:1992 KS IEC 60044-1:2003 KS IEC 600214-3:2002 KS IEC 60044-5:2004 KS IEC 60076-l: 201 I KS IEC 60076-14:2013 Ballasts for tubular fluorescent lamps - Performance requirements. DC supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements. D.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements. Self-ballasted lamps for general lighting services - Safety requirements. Self-ballasted lamps for general lighting services - Performance requiremcnts. Bayonet lamp holders. LED modules for general lighting - Safety specifications. Luminaires - Part 2: Particular requirements - Section 1: - Fixed general purpose luminaires. Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires. Luminaires - Part 2: Particular requirements - Section 3: Luminaires for road and strect lighting. Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires. Luminaires - Part 2: Particular requirements - Section 5: Floodlights. Luminaires - Part 2: Particular requirements - Section 6: Luminaires with builrin transformers for filament lamps. Luminaires - Part 2: Particular requirements. Section 7: Portable luminaires for garden use. Luminaires - Part 2: Particular requirements - Section 8: Handlamps. Luminaires - Part 2: Particular requirements. Section 9: Photo and film luminaires (non-professional). Self-ballasted LEDJamps for general lighting services - Performance requirements. Luminaires - Part 2: Particular requirements. Section 10: Portable child-appealing luminaires. Luminaires - Parl2-17: Panicular requirements - Luminaires for stage lighting, television and irlm studios (outdoor and indoor). Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swrmming pools and similar applications. Luminaires - Part 2: Particular requirements. Section l9: Air-handling luminarres (safety requirements). Luminaires - Part 2-20: Partrcular requirements - Lighting chains. Luminaires - Part 2: Particular requirements - Section 22: Luminaires for emergency lighting. Luminaires - Part 2: hrticular requirements - Section 23: Extra low voltage lighting systems for filament lamps. Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures. Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical arcas of hospitals and health carc buildings. Electriciry metering Part 3: minimum requirements Electricity metering Part 4: code of practice for electricity metering Electricity metering Part 6: Advanced metering infrastructure (AMI) for residential and commercial customers Specification for current transformers. Electric power transmission and distribution- overhead power lines for conditions prcvailing in kenya. Part 2: Safety Electrical power fransmission and distribution - Guidelines for the application design, planning and construction of medium voltage overhead power lines up to and including 22 kV, using wooden pole st Elecfical power transmission and distribution - Guidelines for the provision of electrical distribution networks in residential areas - Part 0: Defrnitions. Electrical power transmission and distribution - Guidelines for the provision of electrical distribution networks in residential areas - Part 1: Planning and design of distribution systems. Electrical power transmission and distribution - Guidelines for the provision of electrical distribution networks in residential areas - Part 2-3: Preferred methods and materials for the installation Electrical power transmission and distribution - Guidelines for the provision of electrical distribution networks in residential areas - Part 3: Overhead distribution in very low, low and moderate con Electrical power transmission and distribution - Overhead power lines - Installation of line conductors. Electrical power transmission and distribution - Code of practice for animal deterrents for electric power supply substations. Electric power transmission and distribution - Energized power lines - Maintenance methods. Electriciry supply - Qualiry of supply - Part l: Minimum standards. Electricity supply - Quality of supply - Part2: Reporting guidelines. Electriciry supply - Quality of supply - Part 3: Voltage characteristics, compatibility levels, limits and assessrnent methods. Elecriciry supply - Qualiry of supply - Part 4: Application guidelines for utilities. Specification for current transformers. Power transformers - Specification - Part 2: Temperature rise. Low-voltage switchgear and controlgear - Part l: General rules. low-voltage switchgear and controlgear - Part 2: Circuit-breakers. lnw-voltage switchgear and controlgear - Part 3: Swirches, disconnectors, switch-disconnectors and fuse-combination units. Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters. I-ow-voltage switchgear and controlgear - Paft 4-2: Contactors and motor-starters - AC semiconductor motor controlers and starters. Iow-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads. I-ow-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elernents - Electromechanical control cilcuit devices. I-ow-voltage switchgear and controlgear - Part 5-3: Control circuit devices and swirching elements - Requirements forvprox.imity devices with defined behaviour under fault conditions (PDF). Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function. low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and swirching elements - DC interface for proximity sensors and switching amplifiers (NAMUR). I-ow-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - RcquL€ments for proximity devices with analogue output. Instrument transformers - Requirements for protection current transformers for transient performance Part 6 Instrument transformers - Part l: Current transformers Insfument transformers -Part 3 : Combined transformers Instrumcnt transformers - part 5: Capacitor voltage transforrners Part I :Transformers General Power transformers Part 14: Liquid-immcrsed power transformers using high temperature insulation materials lTth November,2OlT THE KENYA GAZETTE 5953 KS IEC 60076-15:2008 Powertransformers - Part l5: Gas-filled powertransformers KS IEC 60076-2:1993 Powertransformers Temperature rise Part 2 KS IEC 6O076-3: 201 3 Power transformers Part 3: Insulation levels. dielectric tests and external clearances in air KS IEC 6O076-4:2002 Power transformers - Part 4 :Guide to the lighting impulse and switching impulse testing-power transformers and reactors KS IEC 60076-6:2007 Power transformers - Part 6: Reactors KS IEC 60282- 1 : 1999 Specification for high-voltage fuses - Part 1 : Current limiting fuses. KS IEC 60282-3: 1999 Specifrcation for high-voltage fuses - Part 3: Determination of shot-circuit power factor for testing current-limiting fuses and expulsion and simrlar fuses. KS IEC 60296:2003 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear. KS IEC 60439-l:1999 Low voltage switchgear and controlgear assemblies- Type-tested and partially type-tested assemblies Part 1 KS IEC 60439-2:2005 Low-voltage switchgear and controlgear assemblies - Part 2: Particular requrrements for busbar funking systems (busways) KS IEC 60439-4:2010 l,ow-voltage switchgear and control adsemblies - Par 4: Partcular requirements for assemblies for construction sites (ACS) KS IEC 60439-5:2006 Low-voltage switchgear and controlgear assemblies Paarticular requirements for assemblies for power distribution in public networks Part 5 KSIEC60715:1981 Dimensions of low-voltage switchgear and controlgear - Standardrzed mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations. KS IEC 60826:2003 Design criteria ofoverhead transmission lines KS IEC 60947-8:2006 Low-voltage switchgear and controlgear Control of units for built-in thermal protection (PTC) for rotating electncal machines Part 8 KS IEC 61439-1:2011 Low-voltage swltchgear and controlgear assemblies KS IEC 61439-2:201 1 lnw-Voltage switchgear and controlgear assemblies. Part 2: Power swrtchgear and controlgear assemblies KS IEC 61558-1::2010 Safety ofpower transformers, power supplies, reactors and srmillar products Part l: General requirements and tests KS IEC 61558-1:1999 Specification for safety of power tmnsformers, power supply units and srmllar apparatus - Part 1: General requirements and tests. KSIEC61558-2:2010 Safetyopowertransformers,powersupplies,reactorsandsimilarproducts -Part2-I: Particularrequirementsandtesta for separating transformers and powe supplies incorporating separating transf KS IEC 61869-1:2010 Instrument transformers. Part 1 : General requirements KS IEC 62041:2003 Power transformers, power supply units, reactors and similar products - EMC requirements. KS IEC 62055-41:2007 Electricity metering - Payment metering systems - Part 41: Standard Transfer Specification.( STS) - Application layer protocol for one-way token carrier systems KS IEC 62056-53:2006 Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer. KS IEC 62056-62:2006 Electricity metering - Data exchange for meter reading, tariff and load control - Part 62:. bierface classes. KS IEC 62208:2002 Empty enclosures for low-voltage switchgear and contlgear assemblies- General requirements KS IEC/TS 60034-2-3 Rotating electrical machines Part 2-3: Specifrc test methods for determining losses and efficiency of converter-fed AC induction motors KSIEC60034-2-l:2014 Rotating electrical machines Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) KS IEC60034-2-2:2010 Rotating electrical machines Part 2-2: Specific methods for determrning separate losses of large machines from tests Supplement to IEC 60034-2- 1 KS I8C60050-321:1986 Intemational electrotechnical vocabulary -Part32l: Instrument Eansformers. KS I8C60076-l l:2004 Power transformers Part I 1: Dry-type transformers. KS 18C60076-12:2008 Power transformers Part 12: Loading guide for dry-type power transformers. KS[EC60947-4-2:?I,0I Specification for low-voltage switchgear and controlgear - Part 4: Contactors and motor starters - Section 2. AC semiconductor motor controllers and starters. KS I8C60947-4-3:2001 non-motor loads low-voltage switchgear and controlgear - Part 4: Contactors and motor starters - Section 3: AC semiconductor controllers and contactors for KSIEC60947-5-I:2001 Speciircation for low-voltage switchgear and conffolgear - Part 5: Control circuit devices and switching elements - Section 1: Electromechanical control circuit devices. KS IEC60947-5-2:2001 Specification for low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 2: Proximity switches. KS I8C60947-5-3:2001 with defrned behaviour under fault conar and controlgear - Part 5: Control circuit devices and switching elements - Section 3: Requirements for proximity devices KS IEC60947-5-4:2001 Specification for low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 4: Methods of assessing the performance of low-energy contacts - Special te KS I8C60947-5-6:2001 Specification for low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 6: DC interface for proximity sensors and switching amplifiers (NAMUR). KS IEC60947-5-9:2006 Low-voltage swrtchgear and controlgear - Part 5-9: Control circuit devices and Switchrng elements-Flow rate switches KS IEC60947-7- 1 :2001 Specrhcation for low-voltage swrtchgear and controlgear - Part 7: Ancillary equrpment - Section 1 : Terminal blocks for copper conductors. KS IEC60947-7-2:2001 Specification for low-voltage switchgear and controlgear - Part 7: Ancillary equipment - Section 2: Protective conductor terminal blocks for copper conductors. KSIEC61558-2-1:1999 Specification for safety of power transformers, power supply units and similar apparatus - Part 2-l: Particular requirements for separating transformers for general use. KS IEC61558-2-2:2010 Safety of power transformers, power.- l supplies, reactors and similar product - Part 2-2: Particular requirements and tests , for control transformers and power supplies incorporating control transformer KSIEC6I558-2-4:1999 Specification for safety of power transformers, power supply units and similar apparatus - Part 2-4: Particular requirements for isolating transformers for general use. KSIEC61558-2-5:1999 Specification for safety of power transformers, power supply units and similar apparatus - Part 2-5: Particular requirements for shaver transformers and shaver supply units. KS IEC6l558-2-6:1999 Specification for safety of transformers, power supply units and similar apparatus - Part 2-6: Particular requirements for safety isolating transformers for general use. KS IEC6l558-2-7:2007 Safety of power transformers, power supplies, reactors and srmilar products-Part 2-7: Particular requirements and tests for transformers and power supplies for toys KSIEC6I558-2-8:1998 Specification for safety of power transformers, power supply units and similar apparatus - Part 2-8: Particular requirements for bell and chime transformers. KS I8C62056-61:2006 Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (oBrs). KS IEEE 1675:2006 Rechargeable batteries for cellular telephones-Specification KSIEC60076-10: 2001 KSIEC60076- 10- 1:2005 KSIEC61558-2- l3:1999 KSIEC6 l 558-2- 15:1999 KSIEC6 l558-2- 17:1 999 KSIEC6l558-2-19:2000 KSIEC6I 558-2-20:2000 KSIEC61558-2-23:2N0 KSIEC6I 558-2-3:1999 KS 1067-1:1991 KS 1067-2:1994 KS 1641:2000 KS 184-2:2011 KS 184-4:2012 KS 184-5:2012 KS 185-1:2007 KS 185-2:1990 KS 1862:2007 KS 1864:2010 KS 2109:2009 KS 2l l0-1:2009 KS 2l l0-2:2009 KS 2l l0-3:2009 KS 2l 10-4:2009 KS 2l 10-5:2009 KS 2110-6:2009 KS2ll2-l:2009 KS2ll2-2:2OO9 KS2ll2-2-l:2OO9 KS21l2-2-2:2OO9 KS2ll2-2-3:2C09 KS2112-2-4:2009 KS2ll2-2-5:2N9 KS2ll2-2-6:2C09 KS2ll2-2-7:2009 KS 2l l2-3:2009 K52295-l:20ll K52295-2:2Oll KS 312-1:I985 KS721:1986 KS 869-1:1990 KS 869-2:1990 KS EAS 3-l:2000 KS IEC 60896-22:2004 KS IEC 60285:1999 KS IEC 60439-1:2001 KS IEC 60439-2:2001 KS IEC 60439-3:2001 KS IEC 60439-4:2001 KS IEC 60439-5:2001 KS IEC 60947- l:1999 KS rE,C 60947 -2:1996 KS IEC 60947-3:1999 KS IEC 60947-8:2003 KS IEC 6101 1-1:1989 KS IEC 61011-2:1990 KS IEC 61643-21:2000 KS IEC 61960:2003 KS I8C60947-5-5:2005 Power transformers Part 10: Determination of sound levels. Power Transformers Part 10-1: Determination of sound levels - Application guide. Specifrcation for safety of power transformers, power supply units and similar apparatus - requirements for auto-transformers for general use. Specification for safety of power transformers, power supply units and similar apparatus - requirements for isolating transformers for the supply of medical locations. Specification for safety of power transformers, power supply units and similar apparatus - Part 2-13: Particular Part 2-15: Particular Part 2-l'1: Particular requirements for transformers for switch mode power supplies. Safety of power transformers, power supply units and similar devices - Part 2-19: Particular requirements for perfirrbation attenuation transformers. Safety of power transformers, power supply units and similar devices - Part 2-20: Particular requirements for small reactors. Safety of power transformers, power supplies, reactors and similar products-Part 2-23: Particular requirements for transformers for constructron sltes Specification for safety of power transformers, power supply units and similar apparatus - Part 2-3: Particular requirements for ignition transformers for gas and oil bumers. Specification for lead-acid stationary batteries - Part 1: General requirements. Specifrcation for lead-acid batteries - Part 2: Requirements for pasted plate type batteries. Specihcation for direct-cunent and low-frequency electronic measuring instruments with a digital display. Primary battenes - Specihcation - Part 2: Physical and electrical specifications. Specihcation for Primary batteries - Part 4: Safety of lithium batteries (Fourth Edition). Primary batteries - Specification - Part 5: Safety of batteries with aqueous electrolyte. kad-acid starter batteries - Part l: General requrements and methods of test - Specification (Fourth Edition). Specification for lead-acid starter batteries - Part 2: Dimensions of batteries, Dimensions and marking of terminals. Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings. Battery chargers - Performance Closed circuit television (CCTV) - Management and operation - Code of practice. Installation and remote monitoring of detector activated CCTV systems - Part 1: Code of practice. Installation and remote monitoring of detector activated CCTV systems - Part 2: Operational requirements. Installation and remote monitoring of detector activated CCTV systems - Part 3: System design requirements. Installation and remote monitoring of detector activated CCTV systems - Part 4: Installation, planning and implementation requirements. Installation and remote monitoring of detector activated CCTV systems - Part 5: Testing, commissioning and hand-over requirements. Installation and remote monitoring of detector activated CCTV systems - Part 6: Maintenance requirements. Electrical security installations - Part 1: General. Electrical security installations - Part 2: Access control. Electrical security installations - Part2-1: Access control systems - General characteristics. Electrical security installations - Part 2-2 Access control systems - Central processor. Electrical security installations - Part 2-3 Access control systems - Card readers. Electrical security installations - Part 2-4: Access control systems - readers controllers. Electncal security installations - Part 2-5: Access conffol systems - Biometric readers Electrical security installatlons - Part2-6: Access control systems - Access cards. Electrical security installations - Part2-7: Access control systems - Barriers. Electrical security installations - Part 3: Electrical security fences (non-lethal). Maximum road speed limiters for motor vehicles Part l:Performance and installation requirements Maximum road speed limiters for vehicles Part 2:Specification for system and component requirements Low-voltage motor starters - Part l: Direct on-line (full voltage) a.c. starters. Specification for varhour (reactive energy). Specification for lead-acid traction batteries or cells - Part l: General requirements and methods of test. Specification for lead-acid traction batteries or cells - Part 2: Dimensions of cells and marking of polarity on cells. Primary batteries - Part l: General requirements. Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements. Sealed nickel-cadmium cylindrical rechargeable single cells - Specifrcation. Low-voltage switchgear and controlgear assemblies - Part l: Type-tested and partially type-tested assemblies. Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways). l,ow-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons hav l,ow-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS). Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCS) for power dis Specification for low-voltage switchgear and controlgear - Part 1: General requirements. Specification for low-voltage switchgear and controlgear - Part 2: Circuirbreakers. Specification for low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch disconnectors and fuse combinations. Low-voltage switchgear electrical machines. Electric fence energizers connection to the supply Electric fence energizers - the supply mains. and controlgear - Part 8: Control units for builrin thermal protection (PTC) for rotating - Part 1: Safety requirements for battery-operated electric fence energizers suitable for mains. Part 2 Safety requirements for battery-operated electric fence energizers not for connection to [.ow voltage surge prctective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods. Secondary cells and battenes contalnrng alkaline or other non-acid electrolytes portable applications. Specification for low-voltage switchgear and conuolgear - Part 5-5: Contol Electrical emergency stop device with mechanrcal latching function. - Secondary lithium cells and batteries for circuit devices and switching elements - / lTth November,2017 THE KENYA GAZETTE 59s5 I KS IEC60947-5-7:2000 KS IEC60947-5-8:2006 KS IEC60947-6-l:2005 KS[EC6O947-6-2:2OO7 KS IEC60947-7-3:2002 KS 1021:1990 KS 1022:1989 KS 04-1 109:1991 KS 1229-t:1994 KS 1229-2:1994 KS 1430-1:1998 KS 1430-2:1998 KS 1430-3:1998 KS 1430-4:1998 KS 1603:2000 KS 1637:2001 KS 1638:2001 KS 1639:2001 KS 179-1:1983 KS 180-1:1981 KS 180-2:1991 KS 187:1987 KS 188-1:1997 KS 188-2:1997 KS 188-3:1997 KS 188-4:1997 KS 188-5:1997 KS 188-6:1997 KS 188-7:1997 KS 189:1979 KS 190-l:1987 KS 190-2:1987 KS 191-1:1987 KS 191-2:1987 KS 192:1987 KS 194:1990 KS 290:1981 KS 314-1:1982 KS 453:2000 KS 468-l:1997 KS 468-2:1990 KS 662-l:2001 KS 662-3:2001 KS 6624:2ffi1 KS 7214-l:1991 KS 762:1989 KS 764:1986 KS 765:1986 KS 863:1988 KS 889-1:1989 KS 889-2:1989 KS 889-3:1989 KS 936:1990 KS EAS 113:1999 KS EAS ll4:1999 KS EAS 115:1999 KS EAS 116:1999 KS EAS ll7:1999 KS EAS 136:2OO7 KS EAS 137-l:2O00 KS EAS 178-l:200'7 KS EAS 178-2:2O0'l KS EAS 2O4-2:2OOI KS IEC 60189-l:2007 KS IEC 60189-2:2007 Low-voltage switchgear and controlgear - Part 5-7: Control devices and switching elements - Section 7: Requirements for proximity with analogue ouput. Low-voltage switchgear and controlgear-Part5-8: Control circuit devices and switching elements-Three- position enabling switches Specification for low-voltage switchgear and controlgear - Part 6-l: Multiple function equipment - Transfer swirching equipment. Specification for low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS). Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Section 3: Safety requirements for firse terminal blocks. Specification for general purpose steel wirc strand. Specif,rcation for 600 / 1000 V PVC insulated single-phase concentnc cables with copper or aluminium conductors for electricity supply. Specification for earthing clamps. Specification for reels and wooden drums for cables, wires and bare conductors - Part 1: Wooden drums. Specification for reels and wooden drums for cables, wires and bare conductors - Part 2: Metal drums (Reels). Specification for mechanical cable glands - Partl: Metallic glands. Specification for mechanical cable glands - Part 2: Polymeric mechanical glands. Specification for mechanical cable glands - Part 3: Special corrosion resistant glands. Specifrcation for mechanical cable glands - Part 4: Code of practice for selection, installation and inspection of cable glands used in electrical installations. Specification for coupling devices for welding cables. Specification for welding cables. Use of cables with a rated voltage not exceeding 450/750 V. Method for the calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V. Specification for rigid PVC conduits and fittings for electrical wiring - Part 1: Conduits. Specification for metallic conduits used for electrical installations - Part l: Conduits. Specification for metallic conduits and fittings for electrical installations - Part 2: Fittings. Specification for conductors of insulated cables (Second Edition). Specification for PVC insulations and sheaths of electric cables and cords - Part I : Physical and electrical requirements. Specification for PVC insulations and sheaths of electric cables and cords - Part 2: Methods of measurement of thickness and overall dimensions and determination of the mechanical properties. Specification for PVC insulations and sheaths ofelectric cables and cords - Part 3: Thermal Ageing Methods. Specifrcation for PVC insulations and sheaths of electric cables and cords - Part 4: Loss of mass test and thermal stability test. Specification for PVC insulations and sheaths ofelectric cables and cords - Part 5: Pressure test at high temperature and tests for resisting to cracking. Specification for PVC insulations and sheaths of electric cables and Cords - Part 6: tests at low temperature. Specification for PVC insulations and sheaths of electric cables and cords - Part 7: Hot deformation test. Specification for aluminium stranded conductors for overhead power lines. Specification for stranded aluminium conductors steel-reinforced and galvanized steel wires for reinforcing aluminium conductors - Part 1: Galvanized steel wires for reinforced aluminium conductors. Specification for stranded aluminium conductors steel-reinforced and galvanized steel wires for reinforcing alurninium conductors - Part 2: Aluminium conductors steel-reinforced (Second Edition). Specifrcation for test on electric cables under hre conditions - Part 1: Test on single vertical insulated wire or cable. Specification for tests on electric cables under fire conditions - Part 2: Tests on bunched insulated wires and cables. Specification for PVC insulated flexible cables and cords of rated voltage up to and including a50fi50 V (Second Editlon). Specification for PVC insulated cables for electricity supply (Third Edition). Specification for mild steel wire for armouring of electric cables. Specification for cables for vehicles - Pan 1: Cables with copper conductors. Specifrcation for PVC-insulated cables (non-armoured) for electric power and lighting (Third Edition). Specification for flexible pvc conduits for electric wiring - Part l: Plain conduits. Specihcation for flexible PVC conduits for electric wiring - Part 2: Comrgated conduits. Kenya wiring regulations - Part 1: Scope, object and fundamental principles. Kenya wiring regulations - Part 3: Assessment of general characteristics. Kenya wiring regulations - Part 4: Protection for safety. Specification for earth rods and their connection - Part 1: Copper-clad earth rods. SpeciFrcation for copper strips for electrical purposes. Method of measurement of resistivity of metallic materials. Standard resistance for copper. Test methods for spark testing of electric cables. Specifrcation for cable trunking - Part 1: Steel surface trunking. Specification for cable trunking - Part2: Steel underfloor (duct) trunking. Specification for cable trunking - Part 3: Specification for cable trunking made of insulating materials. Specifrcation for insulated cables and flexible cords for use in high temperature zones, PVC insulated conductors for overhead power services lines - Specifrcation. PVC-Insulated cables (non-armoured) for electrical power and lighting - Specifrcation. Electric cables - Spark testing - Test method. Copper conductors in insulated cables - Specifrcation. Insulated flexible cables - Specification. Intemational Electrotechnical Vocabulary - Electric cables. PVC insulations and sheaths of electric cables and cords - Specification - Part 1: Physical and electrical requirements. Flexible PVC conduits for electric wiring - Specification - Part 1: Plain conduits. Flexible PVC conduits for electric wiring - Specification - Part 2: Comrgated conduits. Metallic conduits and fittings for electrical installation - Specification - Part 2: Fittings. low -frequency cables and wires with PVC insulation and PVC sheath-Part 1: General test and measuring methods l,ow-frequency cables and wires with PVC insulation and PVC sheath- Part - 2: Cables in pairs, triples, quads and quintuples for inside installations KS IEC 60282-2:200t) KS IEC 60317-15:2004 KS IEC 60317-21:1990 KS IEC 60317-27:1998 KS IEC 60317-31:1997 KS IEC 60317-32:1997 KS IEC 60317-33:1997 KS IEC 60317-37:2000 KS IEC 60317-39:1992 KS IEC 60317-40:1992 KS IEC 60317-46:1997 KS IEC 60317-48:1999 KS IEC 60317-49:1999 KS IEC 60317-50:1999 KS IEC 60317-7:1997 KS IEC 60422:19E9 KS IEC 60465:1998 KS IEC 60502-1:2004 KS IEC 60502-2:2005 KS IEC 60502-4: 2010 KS IEC 60666: 2010 KS IEC 60684-3-320 KS IEC 61065:1991 KS IEC 61 109: 2008 KSIEC61125:1992 KS IEC 61 198:1993 KS IEC 61868:1998 KS IEC 62021-1:2003 KS IEC60317-0-3:2004 KS I8C60317-0-4:2006 KS IEC60317-0-5:2006 KSrEC60684-3-406-/08 KS 1059-l:2010 KS 1l l-3:1998 KS 1503-1:1999 KS 1504:2000 KS 1505-2:2000 KS 1505-3:1999 KS ISO IEC 18010:2002 KS ISO IEC 15018:2004 KS 1589:2000 KS 1590-1:2001 KS 1590-2:2001 KS 1590-3:2001 KS 1724:2001 KS 1882-1:2009 KS 1884-l:2009 KS 1884-2.2009 KS 1884-3:2009 KS 1884-4:2009 Specification for high-voltage fuses - Part 2: Expulsion fuses. Specifications for particular types of wmdmg wires - Pan 15: Polyesterimide enamelled round aluminium wire, class 180. Specifications for particular types of winding wires - Part 21: Solderable polyurethane enameled rcund copper wire overcoated with polyamide, class 155. Specifications for particular types of winding wires - Part 27 : Paper tape covered rectangular copper wrre. Specifications for particular types of winding wires - Part 3l: Glass-fibre wound resin or vamish impregnated, bare or enamelled rectangular copper wire, temperature index I 80. Specifications for particular types of winding wires - Part 32: Glass-fibre wound, resin or vamish impregnated, bare or enamelled rectangular copper wire, temperature index 155. Specifications for particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200. Specifications for particular rypes of winding wires - Part 37: Polyesterimide enamelled round copper wire, class'180, with a bonding layer. Specifications for particular types of winding wires - Part 39: Glass-fibre braided, polyester or polyesterimide vamish- treated, bare or enamelled rectangular copper wire, temperature index 1 80. index 200.ions for parficular types of vinrlino wires - Part 40: Glass-fibre braided, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240. Specifications for particular types of winding wires - Part enamelled round copper wire, temperature index 155. Specifications for particular types of winding wires - Part enamelled round copper wire, tenlperature index I 80. Specifications for particular types of winding wires - Part enamelled round copper wire, temperature index 200. 48: Glass-fibre wound resin or varnish impregnated, bare or 49: Glass-fibre wound resin or vamish impregnated, bare or 50: Glass-fibre wound resin or varnish impregnated, bare or Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copper wire, class 220. Supervision and maintenance guide for mineral insulating oils in electrical equipment. Specification for unused insulating mineral orls for cables with oil ducts. Power cables with extruded insulation and therr accessories for rated voltages from lkV (um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1kV (Um = 1,2 kV) and 3 kV ( Um = Power cables with extruded insulation and their accessories for rated voltages from lkV (um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages of 6 kV (Um = 7 ,2 kY) up to 30 kV ( U Power cables with extruded insulation and their accessories for rated voltages from lkV (um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages Detection and determination of specified antioxidant additives in insulating oils. Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 320 - Polyethylene terephthalate textilc sleeving, lightly impregnated. Method for evaluating the low temperaturc flow properties of mineral insulating oils aftcr ageing. Composite insulators for a.c. overhead lines with a nominal voltage greater than 100 v- Definitions, test methods and acceptance criteria Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability. Mineral insulating oils - Methods for the determination of 2-furfirral and related compounds. Mineral insulating oils - Determination of kinematic viscosiry at very low temperatures. Insulating Iiquids - Determination of acidity - Part l: Automatic potentiometric titration. Specifrcations for particular types of winding wtes - Part 0-3: General requirements - Enamelled round aluminium wire. Specifications for particular types of winding wires - Part 0-4: Ceneral requirements - Glass-fibre wound resin or vamish impregnated, bare or enamelled rectangular copper wire. Specifications for pa(icular types of winding wires - Part 0-5: General requirements - Glass-fibre braided, resin or vamish impregnated, bare or enamelled rectangular copper wire. Flexible insulatrng sleeving - Part 3: Specifications for individual types ofsleeving - Sheets 406 to 408 - Glass sleeving with PVC coatrng. Specification for general requirements for apparanrs for connection to the public switched telephone networks: Part 1: General requirements Specification for Intruder alarm systems in buildings - Pan 3. Systems installed in clients premises (Third Edition). Glossary of terms relatrng to electromagnetrc interference (EMI) and electromagnetic compatibility (EMC) - Part l: Fundamental terms in relation to electromagnetism. Specification for limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. Specification for radio interference characteristrcs of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determinrng hmits. Specification for radio interference characteristics ofoverhead power lines and high voltage equipment - Part 3: Code of practice for mrnimizing the generation of radro noise. Specification for telecommunications installatrons - Part 2: Telecommunications pathways and spaces for commercial burldings. Specification for telecommunications installations - Part 3: Integrated telecommunications cabling systems for small office and residential premises. Specification for safety practices in the operation and maintenance of radio transmitters and similar equipment. Specification for siting of radiocommunications facilities - Part 1: Low frequency, medium frequency and high frequency transmitting and high frequency receiving facilitres. Specif,tcation for siting of radiocommunicatrons facilities - Part 2: Guidelines for fixed, mobile and broadcasting services operahng at frequency above 30 MHz. Specificatron for siting of radiocommunications facilities - Part 3: Fixed location satellite earth stations. Specification for multi-frequency tone signalling protocol for social alarm systems. Installation of telecommunication cables - Code of practice - Part l: Frbre optrc cable in buildmgs. Accessories for use in antenna installations - Specification - Part 'l: Splitters. Accessories for use in antenna lnstallatrons - Specification - Part 2: Outlet boxes. Accessories for use in antenna installations - Specification - Part 3: TV channel amplifiers, band amplifiers and broadband amplifiers. Accessories for use in antenna installations - Specification - Part 4: TV channel convertors. 17th November,2OlT THE KENYA GAZETTE 5957 KS 1884-5;2009 Accessories for use rn antenna rnstallations - Specification - Part 5: l.ow noise block convertors. KS 1 885:2009 Installation of mobile radio equipment in land based vehicles - Code of practice. KS 18e3-1:200e ',?'#3':?HHlll#iiit'iT5iil?'li:nT#'":Tffi::"xi'J1,",i,':fJ;'#L:* sound broadcast transmissions - KS 1893-2:2009 The installation of communal and single antenna systems for the reception of television and sound broadcast transmissions - Code of practice - Parl2: Satellite antenna systems. KS 1894- 1 :2009 Radio sites - Part 1: Technical performance (narrowband analogue mobile radio services). KS 1894-2:2009 Radio sites - Part 2: Site management. KS 1896:2009 Digital cellular telecommunications system - Abbreviations and acronyms. KS 1897:2009 Radio broadcasting systems - Very High Frequency (VIf), frequency modulated, sound broadcasting transmitters - Code of practice for site engineering. KS 1901 :2009 Satellite television receiving antennas - Mechanical requiremcnts. KS 1904:2009 Digital cellular telecommunications system - Radio equipment and systems - Radio site engineering for radro equipment and systems in the mobile service. KS 2229:2010 Electronic records management systems - functional requirements KS IEC 60268-1:1985 Specification for sound system equipment - Part 1: General. KS IEC 60268-5:1989 Specification for sound system equipment-Par1.zi loudspeakers. KS 2513: 2014 Composite pole for telephone, Power and lighting purposes- Specification K52522:2015 Set-top box decoder for freeto-air second generation digital terrestrial television broadcasting system (DVB-T2) Specification KS 469-1:1984 Specification for high fidelity audio equipment and systems - Part l: General. KS 469-1 1:1984 Specification for high fidelity audio equipment and systems - Part I l: High fidelity systems for use in vehicles. KS 469-2:1984 Specification for high fidelity audio equipment and systems - Part 2: High fidelity systems for use in vehicles. KS 469-3:1982 Specification for high fidelity audio equipment and systems - Part 3: Record playing equipment and cartridges. KS 469-5:1984 Specification for high fidelity audio equipment and systems - Part 5: Microphones. KS 469-6:1982 Specification for high fidelity audio equipment and systems - Part 6: Amplifiers. KS 469-8:1984 Specification for high fidelity equipment and systems - Part 8: Combination equipment. KS IEC 60268-l:1985 Sound system equipment - Part 1: General. KS IEC 60268-10:1991 Sound system equipment - Part 10: Peak prograrnme level meters. KS IEC 60268-1 l:1987 Sound system equipment - Part I 1: Application of connectors for the interconnection of sound system components. KS IEC 60268-12:1987 Sound system equipment - Part 12: Application ofconnectors for broadcast and similar use. KS IEC 60268-13:1998 Sound system equipment - Part l3: Listening tests on loudspeakers. KS IEC 60268-14:1980 Sound system equipment - Part 14: Circular and elliptical loudspeakers; outer frame diameters and mounting dimensions. KS IEC 60268- I 6:1998 Sound system equipment - Part I 6: Objective rating of speech intelligibility by speech transmission index. KS IEC 60268-17:1990 Sound system equipment - Part 17: Standard volume indicators. KS IEC 60268-18:195 Sound system equipment - Part l8: Peak prograrnme level meters - Digital audio peak level meter. KS IEC 60268-3:2000 Sound system equipment - Part 3: Amplifiers. KS IEC 60268-4:1997 Sound system equipment - Part 4: Microphoncs. KS IEC 60268-5:1989 Sound system equipment - Part 5: Loudspeakers. KS IEC 60268-6:1971 Sound system equipment - Part 6: Auxiliary passive elements. KS IEC 60268-7:1996 Sound system equipment - Part 7: Headphones and earphones. KS IEC 60268-8:1973 Sound system equipment - Part 8: Automatic gain control devices. KS IEC 60268-9:1977 Sound system equipment - Part 9: Artificial reverberation, time delay and frequency shift equipment. KS IEC 60320- I :2007 Appliances couplers for household and similar general purposes- Part l:General requirements KS IEC 60728-5:2007 Cable networks for television signals,sound signals and interactive services Part 5:Headend equipment KS IEC 60735:1991 Measuring methods for video tape properties. KS IEC 6O799:1998 Elecrical accessories-Cord sets and interconnection cord sets KS IEC 60958-1:2008 Digital audio interface - Part l: General KS IEC 60958-3:2009 Digital audio interface - Part 3: Consumer applications KS IEC 60958-4:2008 Digital audio intertace -Part4: Professional applications KS IEC 61 105:1991 Reference tapes for video tape recorder systems. KS IEC 61606-3 Audio and audiovisual equipment Digital audio parts Basic measurement methods of audio characteristics Part 3: hofessional use KS IEC 61606-4 Audio and audiovisual equipment Digital audio parts Basic measurement methods of audio characteristics Part 4: KS IEC 61811-52:2002 "'::ffi1:';:T'::i"i"-"n* relays of assessed quality - part 52: Blank detail specification - Elecrromechanical all-or- nothing telecom relay of assessed quality-Two change-over-contacts, 20 mm x 10 KS IEC 61966-3:2000 Specification for multimedia systems and equipment - Colour measurement and management - Part 3: Equipment using cathode ray tubes. KS IEC 62002- l :2008 Mobile and portable DVB-T/H radio access- Interface access KS IEC 62104 Characteristics of DAB receivers KS IEC 62684:201 1 Interoperability specifications of common external power supply(EPS) for use with data-enabled mobile telephones KS IEC CISPR l5:2OO9 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. KSIECCISPR 16-1:2010 Specificatron for radio disturbarce and immunity measuring apparatus and methods- Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus KS IEC CISPR 16-l-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and KSTECCTspR 16-1-5 r#[Hl[ff::Tli."X'i,il",f,.,*lH'Jiffiil',',,1tri-ffllffi*[j'lliT"';n"0.. part r-s: Radio disrurbance and immunity measuring apparatus- Antenna calibration test sites for 30 MHZ TO 1000 MHZ KSIECCISPR 16-2:2008 Specification for radio disturbance and immunity measuring apparatus and methods Part: 2- 1: Methods of measurements of disturbances and immunity - Conducted disturbance measurements KS IEC CISPR 16-2-2 Specification for radio disturbance and immunity measuring apparatus and methods of measurement of disturbance and immunity-Measurement of disturbance power Part 2-2 KS IEC CISPR 16-2-4 Specification for radio disturbance and immuniry measuring apparatus and methods. Pafi 2-4 : Methods of measurement of disturbances and immunity- Immunity measur€ments KS IEC CISPR 16-4-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurements. KS IEC CISPR 23:1999 Specification for radio disturbance characteristics of industrial, scientific and medical equipment - Determination of limits. KS IEC CISPR 24:1999 Specification for immunity characteristics of information technology equipment - Limits and methods of measurement. KS IEC/TR 62002-3 KS IEC/TR 62002-4 KS IEC/TR 62393:2OO5 KSlEC6l966-2-2:2003 KS IECCISPR 16-2.3 KS IEEE 1625:20M KS ISO 7935:1992 KS ISOIEC 1 1801 :2008 KS ISOIEC24702:2006 KSISOIECTR24704:20M KSISOIECTR24T 50 :200'l KSISOIECTR29tO6:2O07 KS 1023:1989 KS 1110:1991 KS 1110-2:2001 KS 1111-1:2000 KS 1111-10:1993 KS 1111-11:1995 KS 1111-12:1993 KS 1111-13:1993 KS 1111-14:1993 KS 1111-15:1993 KS llll-16:1994 KS 1111-17:1995 KS l11l-18:1994 KS 11ll-19:1995 KS llll-2:1993 KS I I l1-20:1997 KS llll-22:199'7 KS llll-23:2002 KS llll-24:2N2 KS 1111-25:2002 KS llll-26:2002 KS llll-27:2ffi2 KS 1111-28:2005 KS 1111-3:1994 KS 1111-30:2fi)5 KS llll-31:2005 KS Illl-32:2005 KS 11ll-33:2005 KS 111l-34:2005 KS 1111-35:2005 KS 1111-36:2005 KS 1111-37:2005 KS 1111-38:2005 KS l11l-39:2005 KS llll-4:1993 KS llll-40:2005 KS llll4l:2005 KS 1111-42:2005 KS 1111-43:2005 KS 1111-zl4:2fi)5 Mobile and portable DVB-T/[I radio access P art 3: Measurement interface Mobile and portable DVB-T/H radio access- Measurement methods for total radiated sensitivity in hand-held broadcast terminals Portable and hand-held multimedia equipment - Mobile computers - Battery run{ime measurement Multimedia systems and equipment - Colour measurement and management - Part 2-2: Colour management - Extended RGB colour space - scRGB. Specification for radio disturbance and immunity measuring apparahrs and methods. Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements Rechargeable batteries for portable computrng- Specificatron Stationary source emissions - Determlnation of the mass concentration of sulphur dioxide - Performance characteristics of automated measuring methods. Information technology - Generic cabling for customer premises. Information technology - Generic cabling - Industrial premises. Information technology - Customer premises cabling for wireless access points. Information technology - Assessment and mitigation of installed balanced cabling channels in order to support IOGBASE-T. Information technology - Generic cabling - Introduction to the MICE environmental classification. Specification for aluminium drawing stock for electrical purposes. Classification of electrical and electronic equipment with regard to protection against electric shock. Classification ofelectrical and electronic equipment with regard to protection against electric shock - Part 2: Guidelines to requirements for protection against electric shock. Specification for safety of household and similar electrical appliances - Part 1: Particular requirements for microwave ovens. Specification for household and similar electrical appliances - Part 10: Particular requirements for appliances for skin and hair care. Specification for household and similar electrical appliances - Part I 1 Particular requirements for electrical clocks. Specification for household and similar electrical appliances - Part 12: Particular requirements for sewing machines. Specificatron for household and similar electrical appliances - Part I 3: Particular requirements for room heaters. Specifrcation for household and similar electrical appliances - Part 14: Particular requirements for coffee mills and coffee grinders. Specification for household and similar electrical appliances - Part 15: Particular requirements for commercial electric ranges, ovens and hob elements. Specification for household and similar electrical appliances - Part 16: Particular requirements for commercial electric deep fryers. Specification for household and similar electrical appliances - Part l7 Particular requirements for commercial electric griddles and griddle grills. Specification for household and similar el'ectrical appliances - Part 18: Particular requirements for commercial electric multi-purpose cooking pans. Specification for household and similar electrical appliances - Part 19: Particular Requirements for commercial electric forced convection ovens. Specification for household and similar electrical appliances - Parl 2: Particular requirements for vacuum cleaners and water suction cleaning appliances. Specification for household electrical appliances - Part 20: Particular Requirements for electric kitchen machines. Specification for household electrical appliances - Part 22: Particular Requirements for electric fans and regulators. Safety of household and similar electrical appliances - Pan23: Particular requirements for instantaneous water heaters. Safety of household and similar electrical appliances - Paft24: Particular requirements for spin extractors. Safety of household and similar electrical appliances - Part 25: Particular requirements for refrigerating appliances, ice- cream appliances and ice-makers. Safety of household and similar electrical appliances - Part 26: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances. Safety of household and similar electncal appliances - Part27: Particular requirements for appliances for heating liquids. Safety of household and similar electrical appliances - Part 26: Particular requirements for ranges hoods. Specification for safety requirements for household electrical appliances - Part 3: Particular requirements for dishwashers. Safety of household and similar electrical appliances - Part 30: Particular requirements for commercial electric boiling pans. Safety of household and similar electrical appliances - Part 31: Particular requirements for commercial electric grillers and toasters. Safety of household and similar electrical appliances - Part 32: Particular requirements for commercial electric hot cupboards. Safety ofhousehold and similar electrical appliances - Part 33: Particular requirements for sauna heating appliances. Safety of household and similar electrical appliances - Part 34: Particular requirements for projectors and similar appliances. Safety of household and similar electrical apphances - Part 35: Particular requirements for insect killers. Safety of household and similar electrical appliances - Part 36: Particular requirements for floor-treatment and floor- cleaning machines, for industrial and commercial use. Safety of household and similar electrical appliances - Part3'l: Particular requirements for ponable immersion heaters. Safety of household and similar electrical appliances - Part 38: Particular requirements for fabric steamers. Safety of household and similar electrical appliances - Part 39: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems. Specification for safety requirements for household electrical appliances - Part 4: Particular requirements for washing machines. Safety of household and similar electrical appliances - Pan 40: Particular requirements for commercial microwave ovens. Safety of household and similar electrical appliances - Part 4l: Particular requirements for walk-behind and hand-held lawn trimmcrs and lawn edge trimmers. Safety of household and similar electrical appliances - Paft 42: Particular requirements for pedestrian-controlled mains- operated lawn scarifiers and aerators. Safety of household and similar electrical appliances - Part 43: Particular requirements for scissors type grass shears. Safety of household and similar electrical appliances - Pafi 44: Particular requirements for drives for vertically moving garage doors for residential use. 17th November,2017 THE KENYA GAZETTE s959 i KS 1I11-45:2005 KS 1111-46:2005 KS 1111-5:1991 KS 1111-6:2000 KS 1111-7:1997 KS 1111-8:1993 KS 1111-9:1990 KS 1l l2:1993 KS lll-2:1998 KS I I l-6:2003 KS 1329:1999 KS 1451:1998 KS 1591 KS 1602:2000 KS 1626:2000 KS 1671-l:2005 KS 1671-2.1:2005 KS 1671-2.2:2005 KS 1671-2.3:2005 KS 1722-2:2001 KS 1722-7:2OOl KS 1723:2001 KS 1747-4:2003 KS 186-10:1983 KS 186-2:1993 KS 186-3:1980 KS 186-4:1980 KS 186-5:1998 KS 186-6:1980 KS 186-7:1991 KS 186-8:1982 KS 186-9:1982 KS 1952:2007 KS 196:1979 KS 197:1979 KS 2169-1:2010 KS 236:1982 K5237:1982 K5239:1996 K52449-l:2013 K52449-2:2013 K52463l.2O13 KS 2464-1:2013 K52464-2:2O13 KS 276:1985 KS 277:1980 KS 278:1983 KS 280:1997 KS 281:1982 KS 282:1988 KS 430:1982 KS 466:1982 KS 467:1987 KS 471:1997 KS 633:1986 KS 934:2004 KS EAS 203:20O7 KS EAS 2O5:20O1 KS EAS 495-1:2009 Safety of household and similar electrical appliances - Part 45: Particular requirements for drives for rolling shutters, awnings. blinds and similar equipment. Safety of household and similar electrical appliances - Part 46: Particular requirements for humidifiers. appliances and their charging and bat for household electrical appliances - Part 5: Particular requrements for baftery powered shavers, hah clippers and similar Specification for safety requirements for household and similar electrical appliances - Part 6: Particular requirements for toasters, grills, roasters and similar appliances. Specification for safety requirements for domestic and similar electrical appliances - Part 7 : Particular requirements for tumbler dryers. Specification for safety requirements for household and similar electncal appliances - Part 8: Particular requirements for frying pans, deep fat fryers and similar appliances. Spectfication for safety requirements for household electrical appliances - Part 9: Requirements for a.c. electric shavers, hair clippers and similar appliances. Specification for power sources for manual metal arc-welding with covered electrodes and for the TIG process - Part 1: Air cooled power sources. Specification for Intruder Alarm Systems in buildings - Part 2: Symbols (Third Edition). Specification for Intruder Alarm Systems in buildings - Part 6: Wire-free systems installed in client's premises (Third Edition). Specification for stationary thermal storage electric water heaters. Specification for hot-rolled copper redraw rods for electrical purposes. Safety requirements for mains operated electronic and related apparatus for household and similar general use Specifi cation for electrode holders. Specification for jet fans and regulators. Domestic and similar electronic equipment interconnection requirements - Audiovisual link - Specification - Part l: General requirements. Domestic and similar electronic equipment interconnection requirements - Audiovisual link - Specification - Part 2-1: Signal quality matching and automatic selection of source devices. Domestic and similar electronic equipment interconnection requirements - Audiovisual link - Specification - Part 2-2: Basic system oriented commands. Domestic and simrlar electronic equipment interconnection requirements - Audiovisual link - Specification - Part 2-3: System oriented application. Alarm systems - Social alarm system - Part 2: Trigger devices. Alarm systems - Social alarm system - Part 7: Application guidelines. Code of practice for documentation for social alarm system. Specification for lighting columns - Part 4: Recommendations for surface protection of metal lighting columns. Specification for automatic electrical fre alarm systems in buildings - Part I 0: Manual call point (frangible cover type). Specification for automatic electrical fre alarm systems in buildings -Part2: Heat-sensitive (point) detectors containing a static element (Second Edition). Specification for automatic electrical fire alarm systems in buildings - Part 3: Heat-sensitive detectors. Specifications for automatic electrical fire alarm systems in buildings - Part 4: Smoke-sensitive (Poinrtype) detectors. Specification for automatic electrical fre alarm systems in Building - Part 5: Self-Contained smoke detectors. Specification for automatic electrical fue alarm systems in buildings - Part 6: Control and indicating equipment. Specification for automatic electrical f,re alarm systems in buildings - Part 7: Methods of test of sensitivity to fre. Specification for automatic electncal fire alarm systems in buildings - Part 8: Components for automatic fre alarm systems for residential premises. Specification for automatic electrical fire alarm systems in buildings - Part 9: Code of practice for installation and servicing. Leakage from microwave ovens - Test procedures. Preferred values for resistors and capacitors. Marking codes for resistors and capacitors. Safety rules for the construction and installation of lifts - Part 1: Electric lifts Specif,ication for refrigerators and freezers. Specification for household electric ranges. Specification for safety requirements for domestic and srmilar electrical appliances (Second Edition). Rotating electrical machines-General requirements. Three-phase cage induction motors-minimum energy performance standards Rotatmg electical machines-Standand methods for determining losses and efficiency from test (including machines for traction vehicles) Non-ducted air conditioners - Testing and rating performance Performance of household electrical appliances-Refrigeration appliances Part 1 : Energy consumption and performance Performance of household electrical appliances- Refrigerating appliances Part 2: Minimum energy performance starndard requirements Specification for instantaneous water heaters. Specification for electnc kettles for household and similar use. Specification for portable electric immersion water heaters. Specification for electric irons for household use (Second Edition). Specification for controls for heating units in household electric ranges. Specification for electric hotplates for use in household electric ranges. Specification for element for electric water heaters for permanent installation in household cylinders or tanks. Method for eddy curent detection of defects. Specification for electric food preparation machines. Safety requirements for electric fans and regulators for household and similar purposes. Specification for a.c. electric fans and regulators. Specihcation for electric toasters. Cooker control units - Specification (Second Edition). Boxes for enclosure ofelectrical accessories - Specification. Controls for heating units in household electric ranges - Specifrcation. 13 A plugs, socket-outlets, adaptors and connection units - Part l: Specification for rewirable and non-rewirable 13 A fused plugs. KS EAS 495-2:2009 KS EAS 495-3:2009 KS EAS 495-4:2009 KS EAS 496:20O9 KS IEC 60034-4 KS IEC 60034-5 KS IEC 60034-7 KS IEC 60034.8 KS IEC 60034-9:2(n7 KS IEC 60079-0:1998 KS IEC 60079-l:2001 KS IEC 60079-10:1995 KS IEC 60079-1 1:1999 KS IEC 60079-12:1978 KS IEC 60079-13:1982 KS IEC 60079-14:2002 KS IEC 60079-15:Z)01 KS IEC 60079-17:2002 KS IEC 60079-18:2001 KS IEC 60079-19:1993 KS IEC 60079-2:2001 KS IEC 60079-20:1996 KS IEC 60079-4:1975 KS IEC 60O79-5:1997 KS IEC 60079-6:1995 KS IEC 60079-7:2001 KS IEC 60204-l:197 KS IEC 60269-3:2010 KS IEC 60269-4:2009 KS IEC 60529:2001 KS IEC 60641-l:1979 KSIEC 60641-2:20O4 KS IEC 60668:1980 KS IEC 60704-l:1997 KS IEC 60704-3:1992 KS IEC 60730-l:1999 KS IEC 60745-l:1977 KS IEC 61029-1:1990 KS IEC 61810- I :2008 KS IEC 61810-2:2005 KS IEC 61810-7:2006 KS IEC 61 81 1- 10:2002 KS IEC 61811-11:2002 KS IEC 61811-53:2002 KS IEC 61811-54:2002 KS IEC 61811-55:2010 KSlEC62262:2O02 KS IEC/TS 62257-8-l KSlEC6O64l-3-2:1992 KS IEC60704-2-2:1985 KS IEC60704-2-3:1987 KSIEC@7O4-2-4:1989 KS IEC6O704-2-5:1989 KSIEC6OTO4-2-6:1994 KSIEC60704-2-7:1997 13 A plugs, socket-outlets, adaptors and connection units - Part 2: Specification for switched and unswitched socket outlets. I 3 A plugs, socket-outlets, adaptors and connection units - Part 3: Specification for adaptors. 13 A plugs, socket-outlets, adaptors and connection units - Part 4: 13 A fused connection units: Switched and unswitched. General pulpose fuse links for domestic and similar purposes (primarily for use in plugs) - Specification. Rotating electrical machines Part 4: Methods for determining synchronous machine quantities from tests Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) Classification Rotating electrical machines Part 7: Classification of types of consEuction, mounting arrangements and terminal box position (IM Code) Amendment 1 Rotatin! electrical machines Part 8: Terminal markings and direction of rotation Rotating electrical machines Part 9: Noise limits Electrical apparatus for explosive gas atrnospheres - Pat 0: General requirements. Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures 'd'. Electrical apparatus for explosive gas atrnospheres - Part 10: Classification ofhazardous areas. Electrical apparatus for explosive gas atmospheres - Part I l: Intrinsic safety 'i'. Electrical apparatus for explosive gas atmospheres - Part 12: Classification of mixtures of gases or vapourc with air according to their maximum experimental safe gaps and minimum igniting currents. Electrical apparatus for explosive gas atmospheres - Part 13: Construction and use of rooms or buildings protected by pressurization. Electrical apparatus for explosive gas atmospheres - Part 14: Electrical installations in hazardous areas (other than mines). Electrical apparatus for explosive gas atmospheres - Part l5: Type of protection 'n'. Electrical apparatus for explosive gas atmospheres - Part l7: Inspection and mailtenance of electrical installations in hazardous areas (other than mines). Electrical apparatus for explosive gas atmospheres - Part I 8: Encapsulation 'm'. Electrical apparatus for explosive gas atmospheres - Part 19: Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives). Electrical apparatus for explosive gas atmospheres - Part 2: Pressurized enclosures 'p'. Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus. Electrical apparatus for explosive gas atmospheres - Part 4: Method of test for ignition temperaturc. Electrical apparatus for explosive gas atmospheres - Part 5: Powder filling 'q'. Electrical apparatus for explosive gas atrnospheres - Part 6: Oil immersion 'O'. Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety 'e'. Safety of machinery - Electrical equipment of machines - Part I : General requirements. Low- voltage fuses-Part 3: Supplementary requirements for fuses for use by unskilled persons( fuses mainly for household and similar application) -Examples of standardized systems of fuses A to F l,ow -voltage fuses - Part 4: Supplementary requfements for fuse-links for the protection of semiconductor devices Degrees of protection provided by enclosures (IP Code) Specification for pressboard and presspaper for electrical purposes - Part l: Defrnitions and general requirements. Pressboard and presspaper for electrical purposes - Part 2: Methods of test. Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurcrEf and control instruments. Test code for the determination of airborne acoustical noise emittcd by household and similar electrical appliances - Part 1 : General requirements. Test code for 0re determination ofakbome acoustical noise emittcd by household and similar electrical appliances - Part 3: Procedures for determrning and verifying declared noise emission values. Automatic electrical controls for household and similar use - Part l: General requiremcnts. Safety of hand-held motor-operated electric tools - Part 1: General requirements. Safety of transportable motor-operated electric tools - Part 1: General requirements. Electromechanical elementary relays -Part 1: General requirements Electromechanical elementary rclays -Part 2: Reliability Electromechanical elementary relays - Part 7:Test and measurement procedure Electromechanical elementary relays of assesed quality - Part l0: Sectional specification-Relays for industrial application Electromechanical clementary relays of assesed quality-Part 11: Blank detail specification- Rclays for industrial application Electromechanical elementary relays ofassessed quality - Part 53: Blank detail specification - Electromechanical all-or- nothing telecom relays of assessed quality-Two change-over contacts, 14mm x 9m -Two change-over contacts,lsmm x7.5mmf assessed quality - Part 54: Blank detail specification-Electromechanical all- or-nothing telecom rclays of assessed quality Electromechanical elementary relays ofassessed quality - Part 55: Blank detail specification - Electromechanical all-or- nothing telecom relays of assessed quality -Two change-over contacts, I I mm x7. Degrees of protection prcvided by enclosures for electrical equipment against extemal mechanical impacts (IK code) Recommendations for small renewable energy and hybrid systems for rural electrification Part 8-1: Specification for pressboard and presspaper for electrical purposes - Part 3: Specification for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1,P.4.2, P.4.3, P.6.1 and Test code for the determination of airbome acoustical noise emitted by household and similar elechical appliances - Part 2-2:Par1riatlar rcquirements for forced draught convection heaters. Test code for the determination of airbome acoustical noise emitted by household and similar electrical appliances - Part 2-3 : Particular requirements for dishwashers. Test code for the determination of airbome acoustical noise emifted by household and similar electrical appliances - Paft 2-4: Particular requirements for washing machines and spin extractor. Test code for the determination of airbome acoustical noise emitted by household and similar electrical applianccs - Part 2-5: Particular requirements for room heaters of the storage type. Test code for the determination of airbome acoustical noise emitted by household 2-6: Particular rcquircments for f,rmble-dryers. Test code for the determination of airbome acoustical noise emitted by household 2-7 : Particl':Iat rcquiremcnts for fans. and similar electrical appliances - Part and similar electrical appliances - Part lTth Novbmber,2OlT THE KENYA GAZETTE 596r KS IEC60704-2-8:1997 Test code for the determination of airbome acoustical noise emitted by household and similar electrical appliances - Part 2-8: Particular requirements for electric shavers. KSIEC60730-2-2:1999 Automatic electrical controls for household and similar use - Part 2-2: Partictlar requirements for thermal motor protectors. KS IEC60730-2-3:2001 Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps. KS I8C60730-2-4:2002 hermetic and semi-hermetic type.r household and similar use - Part 2-4: Particular requirements for thermal motor KS r8C60730-2-5:2000 ^ffiff1"J:t;:,::1iT:*:ilT:;:Tgl"i,Tl1,oJ,,-,,u, use - part 2-5: particurar requirements ror auromatic erectrical burner control systems. KS I8C60730-2-6:1991 Automatic electrical controls for household and similar use - Part 2-6: Particular requrrements for automatic electrical pressure sensing controls including mechanical requirements. KS I8C60730-2-7:1990 Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for trmers and time switches. KS IEC60730-2-8:2000 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, rncluding mechanical requirements. KSIEC60730-2-13:1997 Automatic electrical controls for household and similar use - Part 2-13: Pa(icular requirements for temperature sensing contlols. KS[EC6O745-2-2:1982 Safety of hand-held motor-operated electric tools - Paft 2-2: Particular requirements for screwdrivers and impact wrenches. KS IEC60745-2-3:1984 Safety ofhand-held motor-operated electric tools - Part 2-3: Particular requrrements for grinders, polishers and disk-type sanders. KS I8C60745-2-4:1983 Safety of hand-held motor-operated electric tools - Part 2-4: Particular requirements for sanders. KS IEC60?45-2-5:1993 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for crrcular saws and circular knives. KS I8C60745-2-6:1989 Safety of hand-held motor-operated electric tools - Part 2-6: Particular requirements for hammers. KSIEC60745-2-7:1989 Safetyof hand-heldmotor-operatedelectrictools -Paft2-7: Particularrequirementsforspraygunsfornon-flammable KS IEC60745-2-8:1982 ,ii3$O"tin*O-neld motor-operated electric tools - Part 2-8: Particularrequir€ments for sheet meral shears. KS I8C60745-2-9:1984 Safety of hand-held motor-operated electric tools - Part 2-9: Particular requirements for tappers. KS I8C61029-2- I :1993 Safety of transportable motor-operated electric tools - Part 2- 1 : Particular requirements for circular saws. KS lEC6lO29-2-2:1993 Safety of transportable motor operated electric tools - Part 2-2: Particular requirements for radial arm saws. KS I8C61029-2-3:1993 Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers. KS IEC61029-24:1993 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders. KS I8C61029-2-5:1993 Safety oftransportable motor-operated electric tools - Part 2-5: Particular requircments for band saws. KS IEC61029-2-6:1993 Safety of transportable motror-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply. KS IEC61029-2-7:1993 Safety of transportable motor-operated electric tools - Part 2-7: Particular requirements for diamond saws with water supply. KS IEC61029-2-8:1995 Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders. KS IEC61029-2-9:1995 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws. KS ISO 10472-6:1997 Safety requirements for industrial machinery - Part 6: Ironing and fusing presses. KS ISO 230-5:2000 Test code for machine tools - Part 5: Determination of the noise emission. KSIEC60335-2-29:201O Household and s.imilar electrical appliances - Safety - Part2-29: Particular requirements for battery chargers KSIEC60335-2-'16:2OO6 Household and similar electrical appliances-Safety, part 2-76:Particular requirements for electric fence energizers KSIEC60704-2- I 1 :1998 Test code for the determrnation of airbome acoustical noise emitted by household and srmilar electrical appliances - Part 2- I I : Panicular requirements for electrically-operated food preparation appl KSIEC60730-2-10:1991 Automatrc electrical controls for household and similar use - Part 2-10: Particular requirements for motor startrng relays. KSIEC60730-2-l 1:1997 Automatic electrical controls forhousehold and similaruse - Part 2-11; Particular requirements forenergy regulators. KSIEC60730-2-12:1993 Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks. KSIEC60730-2-9:2000 Automattc electrical controls for household and simrlar use - Part 2-13: Particular requirements for humidity sensing controls. KSIEC6O730-2-14:2001 Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators. KSIEC60730-2-1'5:1997 Automatic electrical controls for household and similar use - Part 2-l5 Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boi KSIEC60730-2-16:1997 Automatic electrical controls for household and similar use - Part 2-16: Particular requirements for automatic electrical water level operating controls of the float type for household and simrlar app KSIEC60730-2-17:2001 Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements. KSIEC60730-2-18:1997 Automatic electrical controls for household and similar use - Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements. KSIEC60730-2-19:2001 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves including mechanical requrements. KSIEC60745-2-I l:1984 Safety of hand-held motor-operated electric tools - Part 2-ll: Particular requirements for reciprocating saws (ig and sabre saws). KSIEC60745-2-12:1982 Safety of hand-held motor-operated electric tools - Part 2-12: Particular requirements for concrcte vibrators (internal vibrators). KSIEC60745-2- l3:1989 Safety of hand-held motor-operated electric tools - Part 2- l3: Particular requirements for chain saws. KSIEC6O745-2- l4: 1984 Safety of hand-held motor-operated electric tools - Part 2- l4: Particular requircments for plancrs. KSIEC60745-2-15:1984 Safety of hand-held motor-operated electric tools - Part 2-15: Particular requirements for hedge trimmers and grass shears. KSIEC60745-2- I 6:1993 Safety of hand-held motor-operated-electric tools - Part 2- I 2: Particular requirements for tackers. KSIEC60745-2- 17:1989 Safety of hand-held motor-operated electric tools - Part 2- l7: Particular requirements for routers and trimmers. KSIEC6I029-2- l0:1998 Safcty of transportable motor-operated electric tools - Part 2- 10: Particular requirements for cutting-off grinders. KSIEC6I029-2-l 1:2001 Safety of transportable motor-operated electric tools - Part 2-1 1: Particular requircments for mitre-bcnch saws. KSIEC60079-15:1990 Electrical apparatus forexplosive gas atmospheres - Part 16: Artificial ventilation for the protection ofanalyser(s) houses. KS 1068-1:1991 Specification for domestic metallic metre boxes - Part: I Single phase metering. KS 1069:1991 ' Specification for PVC covered conductors for overhead powcr lines. KS 1187:1993 KS 1587:2007 KS 1601:2000 KS 1625:2(X)1 KS 177-1:1981 KS 177-2:1981 KS 1827:2007 KS 1859-3:2010 KS 1861:2005 KS 1863:2005 KS 1868:2007 KS 1876-l:2010 KS 31 1-1:1987 KS 311-2:1982 KS 470:1982 KS 503-1:1993 KS 503-2:1990 KS 763:1987 KS EAS 168:200'7 KS EAS 388-2:2005 KS IEC 60034-3 KS IEC 60034-6 KS IEC 60099- l:1999 KS IEC 60099-3:1990 KS IEC 60099-4:1998 KS IEC 60099-5:2000 KS IEC 60127-1:1999 KS IEC 6O127 -2:1999 KS IEC 60127-3:1988 KS IEC 60127-4:1996 KS IEC 60127-5:1988 KS IEC 60127-6:1994 KS IEC 60514:1975 KS IEC 60669-1:2007 KS IEC 60670-1:2002 KS IEC 60670-21:2004 KS IEC 60670-22:2003 KS IEC 60670-23:2006 KS IEC 60687 KS IEC 61036 KS IEC 61557-1:1997 KS IEC 61557-10:2000 KS IEC 61557-2:1997 KS IEC 61557-3:1997 KS IEC 61557-4:1997 KS IEC 61557-5:1997 KS IEC 61557-6:1997 KS IEC 61557-7:1997 KS IEC 61557-8:1997 KS IEC 61557-9:1999 KS IEC 61643-l:2002 KS IEC 61865:2001 KS IEC 61936-1:2002 KS IEC 62052-11:20O3 KSIEC 62052-21:?nO4 KS IEC 62053-1 1:2003 KS IEC 62053-21:2003 Specification for metallic clips for electrical wiring. National electrical safety code. Specification for welding power sources for industrial and professional use. Specification for voltage bands for electrical installations of buildings. Specrhcation for graphical symbols used in electrotechnology - Part 1: Kind of current distribution systems, methods of connection and circuit elements. Graphical symbols used in electrotechnology - Pan 2: Machines, transformers, primary cells and accumulators, transductors and magnetic amplifiers, indicators. Voltage characteristics of electncity supplied by public distribution systems. Electrical power transmission and distribution- High-voltage operating regulations - Part 3: Model regulations- Recommended model regulations relating to power systems for operating, access control and Electrical installation - Secondary batteries installed in buildings. Emergency power supplies in hospitals - Electrical installation - Code of practice. Overhead power lines - Loading tests on structures. Electrical power transmission and distribution - Overhead power lines for conditions prevailing in kenya. Part 1: Cde of practice Specification for miniature circuit breakers (MCB's). Specification for miniature circuit breakers and distribution boards - Part 2: Distribution boards. Safety requirements for electrical equipment for room air-conditioners. Code of practice for protection of structures against lightning (Second Edition). Code of practice for the protection of structures against lightning - Part 2: Code of practice for earthing. Specification for wrought aluminium strip for electrical purposes. Junction boxes for use in electrical installations - Specification. High-voltage fuses - Part 2: Expulsion fuses. Rotating electrical machines Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines Rotating electrical machines Part 6: Methods of cooling (IC code) Surge arresters - Part l: Nonlinear resistor type gapped surge arresters for a.c. systems. Surge arresters - Part 3: Artificial pollution testing of surge arresters. Surge arresters - Part 4: Metal-oxide surge afiesters without gaps for a.c. systems. Surge arresters - Part 5: Selection and application recommendations. Miniatures fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links. Miniatures fuses - Part 2: Cartridge fuse-links. Miniatures fuses - Part 3: Sub-miniature fuseJinks. Miniatures fuses - Part 4: Universal Modular Fuse-Links (UMF). Miniatures fuses - Part 5: Guidelines for quality assessment of miniature fuse-links. Miniatures fuses - Part 6: Fuse-holders for miniature cartridge fuseJinks. Acceptance inspection of class 2 altemating-current watthour meters. Switches for household and similar fixed-electrical installations - Part 1: General requirements. Boxes and enclosures for electrical accessones for household and similar fixed electrical installations General requirements Part I Boxes and enclosures for electrical accessories for household and srmilar fixed electrical installations- part 21: Particular Requirements for boxes and enclosures with provision for suspension means Boxes and enclosures for electrical accessories for household and similar fixed electrical installations-Part 22: Parlicular requirements for connecting boxes and enclosures Boxes and enclosures for electrical accessories for household and similar fixed electncal installations- Part 23: Particular requirements for floor boxes and enclosure Altemating current static watt-hour meters for active energy (classes 0.2 S and 0.5 S). Altemating current static watt-hour meters for active energy (classes I and 2). Electrical safety in low voltage distribution systems up to I 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measurcs - Part 1: General requirements. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment Part 2: Insulation resistance.ge distnbution systems up to I 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: t oop impedance. Electrical safety in low voltage distribution systems up to 10O0 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connectio Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Residual current devices (RCD) Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 50O V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices Elecaical safety in low voltage distribution systems up to I 000 V a.c. and I 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fau Surge protective devices connected to low-voltage power distribution systems - Part l: Performance requirements and testing methods. Overhead lines - Calculation of the electrical component of distance between live parts and obstacles- Method of calculation Power installations exceeding I kV a.c - Part 1: Common rules, Electricity metering equipment (AC) - General requirements, tests and test conditions - Part I 1: Metering equipment. Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 2l'. Tariff and load control equipment. Electricity metering equipment (a.c.) - Particular requirements - Part 11: Elechomechanical meters for active energy (classes 0,5, 1 and 2). Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes I and 2). lTth November,2OlT THE KENYA GAZETTE 5963 i KSIEC 62053-22:2003 KS IEC 62053-23:2003 KS IEC 62053-31:1998 KS IEC 62053-61:1998 KS IEC 62054-l 1:2004 KS IEC 62054-21:2004 KSIEC 62O56-21:2O02 KS IEC 62056-3 I :1999 KS IEC 6205641:1998 KSIEC 62056-42:?n02 KS IEC 6205646:2O02 KS IEC 62056-51:1098 KS IEC 62056-52:1998 KS IEC/TS 62257-9-5 KS IE'C60669-2-1:2009 KS IEC60669-2-2:2ffi6 KS I8C60669-2-3:2006 KS IEC60669-24:20OI KSIECTR 62051-l:2004 KS 1623-2-5:2N3 KS 1673:2-1:2003 KS 1673-1:2004 KS 1673-2-2:2Cf3 KS 1673-2-3:2OO3 KS 1673-24:2ffi3 KS IEC 61215:2005 KS 1678-5:2003 KS 1678-8:2003 KS 1679:2003 KS EAS 366:2N5 KS 1682:2003 KS 1683:2003 KS 1684:2003 KS 1685:2003 KS 1688:2003 KS 1709-1:2009 KS 1709-2:2009 KS 1709-4:2009 KS 1851-1:2009 KS l85l-2:2009 KS 1852-l:2fi)9 KS 1852-2:2fi)9 KS 1854:2007 KS 1855-1:2009 KS 1855-2:2009 KS 1855-3:2009 KS 1869:2009 KS 1870:2009 KS 1871:2009 KS 1890:2009 KS l89l:2009 KS 1898:2009 KS IEC 60269-6:2010 KS IEC 60891:2009 KS IEC 60904-1:2006 Electricity metering equipment (a.c.) - Particular requkements - PNt22: Static meters for active energy (classes 0,2 S and 0,s s). Electricity metering equipment (a.c.) - Particular aequfuements - Pafi23: Static meters for reactive energy (classes 2 and 3). Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only). Electricity metering equipment (a.c.) - Particular requtements - Part 61: Power consumption and voltage requirements. Electricity metering equipment (a.c.) - Tariff and load control - Part I 1: Particular requirements for electronic ripple control receivers. Electricity metering equipment (a.c.) - Tariff and load conhol - Part 21: Particular requirements for time switches. Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Dircct local data exchange. Electricity metering - Data exchange for meter reading, tariff and load control - Part 3l: Use of local area networks on twisled pair with carrier signalling. Electricity metering - Data exchange for meter reading, tariff and load contol - Part 4l: Data exchange using wide area networks - Public switched telephone network (PSTN) with I INK+ protocol. asynchronous data exchange. exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented Electricity metering - Data exchange for meter rcading, tariff and load control - Part 46i Datalink layer using HDLC protocol. Electricity metering - Data exchange for meter reading, tariff and load conhol - Part 5 I : Application layer protocol. Electricity metering - Data exchange for meter reading, tariff and load control - Part 51: Communication protocols management distribution line message specification (DLMS) server. Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-5: Integrated systems Selection of standalone lighting kis for rural electrification Switches for household and similar frxed-electrical installations - Part 2-l: Particular requirements - Electronic switches. Switches for household and similar fixed-electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-conkol switches (RCS). Switches for household and similar fixed-electrical installations - Part2-3: Particular requirements - Time delay switches (rDs). Swirches for household and similar fixed-electrical installations - Part 24: Particular r€quirements - Isolating switches. Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part l: Terms related to data exchange with metering equipment using DLMS/COSEM. Generic specification for solar photovoltaic syst€ms-syst€m design, installation, operation, monitoring and maintenance. Part 2:Test procedures for main component. Section 5:Test procedures for luminaries Generic specification for solar photovoltaic systems-system design, installation, operation, monitoring and maintenance. Part 2:Test procedures for main components. Section 1:Test procedures for photovolt Solar photovoltaic power systemsdesign, installation, operation, monitoring and maintenance-code of practice. Part l:General PV systems requircments Generic specification for solar photovoltaic systems - Systems design, installation, operations, monitoring and maintenance - Part 2:Test procedures for main components. Section 3: Test procedures for regulatorltaic systems - System design, installation, monitoring and maintenance - Part 2: Test procedures for main components - Generic specification for solar photovoltaic systems - System design, installation, operating, monitoring and maintensnce - Part 2:Test procedures for main components - Section 4:Test procedures for i Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval. Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method. Photovoltaic devices.Part 8: Measurement of spectral response of a photovoltaic (PV) device LIV test for photovoltaic (PV) modules Characteristic parameters of stand-alone photovoltaic systems Salt mist corrosion testing of photovoltaic(PV) modules Rating of direct coupled photovoltaic (PV) pumping systems Susceptibility of a photovoltaic (PV) module to accidental impact damage(resistance to impact test) Photovoltaic system performance monitoring - guidelines for measurement, data exchange and analysis Crystalline silicon photovoltaic (PV) array - On-site measurement of I-V characteristics. Batteries for use in photovoltaic power systems - Specification Part l: General requirements. Batteries for use in photovoltaic power systems - Specification Part 2: Modified lead acid batteries. Batteries for use in photovoltaic power systems - Specification Part 4: Recommended practice for sizing lead acid batteries for photovoltaic (PV) systems. Thermal solar systems and components - Solar collecton - Part 1: General requirements. Thennal solar systems and components - Solar collectors - Part 2: Test methods. Thermal solar systems and components - Factory made systems - Part 1: General requirements. Thermal solar systems and components - Factory made systems - Part 2: Test rnethods. Wind turbines - Protective measures - Requirements for design, operation and maintenanc€. Thermal solar systems and components - Custom built systems - Part 1: General requirements. Thermal solar systems and components - Custom built systems - Part 2: Test method. Thermal solar systems and components - Custom built systems - Part 3: Performance characterization of stor€s for solar heating systems. Determination of solar reflectance near ambient tempemture using a portable solar reflectometer - Test method. Exposure of solar collector cover materials to natural weathering under conditions simulating stagnation mode - Test method. Determining resistance of solar collector covers to hail by impact with propelled ice balls - Test method. Installation and service of solar space heating systems for one- and two- family dwellings - Code of practice. Evaluating absorptive solar receiver materials when exposed to conditions simulating stagnation in solar collectors with cover plates - Test method. Standard method for on-site inspection and verification of operation of solar domestic hot water systems. Low voltage fuses part 6:supplementary requiremcnts for fuse- links for thc protection of solar pholovoltaic energy systems. Photovoltaic devices - procedurcs for temperature and irradiance corrections to measured I-V characteristics Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics. KS IEC 60904-10:2009 KS IEC 60904-3:2008 KS IEC 60904-4:2009 KS IEC 60904-5:2011 KS IEC 60904-9:2007 KS IEC 61 1 I 6:1992 KS IEC 61215:2005 KS IEC 61400-1:2005 KS IEC 61400-14:2005 KS IEC 61400-2:2006 KS IEC 61400-21:2fi)8 KS IEC 61400-22:2010 KS IEC 61400-24:2010 KS IEC 61646:2008 KS IEC 61683:1999 KS 1687:2003 KS IEC 61730-1:2004 KS IEC 61730-2:2004 KS IEC 61853:2011 KS IEC 62006:2010 KS IEC 62093:2005 KS IEC 62097:2008 KS IEC 62108:2007 KS IEC 62109-l:2010 KS IEC 62109'2:2011 KSlEC62253:2011 KS IEC 62256:2008 KS IEC 62446:2009 KS IEC 62509:2010 KS IEC 62532:201I KSIECT 61400-23:2001 KS IEC TS 61836:2007 KS IEC TS 62124:2@4 KS IEC TS 62257-tz-l KS IEC TS 62257-2 KS rEC TS 62257-3 KS IEC TS 62257-4 KS IEC TS 62257-5 KS IEC TS 62257-6 KS IEC TS 62257.7 KS IEC TS 62257.7-I KS IEC TS 62257-'7.3 KS IEC TS 62257-9-2 KS IEC TS 62257.9-3 KS IEC TS 6225'7-94 KS IEC/TS 6225'7-9-5 KS IEC/TS 62257-7.1 KS I8C60050-415:1999 KS IECTS62257-1:2003 KS IECT562257-9-1:08 KS IECTS62257-9-6:08 KS ISO 13600:1997 KS ISO 13601:1998 KS ISO 13602-l:2002 KS ISO 13602-2:2006 KS ISO 81400-4:2005 KS ISO 8528-l:2004 KS ISO 8528-10:1998 KS ISO 8528-12:1997 Photovoltaic devices part 10: Methods of linearity measurement Photovoltaic devices - Part 3: Measurement principles for terrestrial photov<,rrtaic (PV) solar devices with reference spectral irradiance data. Photovoltaic devices-pat 4:Reference solar devices-procedures for establishing calibration traceability Photovoltaic devices part 5:Determination of the equivalent cell temperature(PV) devices by the open circuit voltage method Photovoltaic devices - Part 9: Solar simulator performance requirements. Electromechanical equipment guide for small hydroelectricic installations. Crystalline silicon terrestrial photovoltaic (PV) module -Design qualification and type approval Wind turbines - Part l: Desrgn requirements. Wind turbines - Part l4: Declaration of apparent sound power levcl and tonality values. Wind turbines - Part 2: Design requirements for small wind turbines. Wind turbinc - Part 2l: Measurement and assessment of power quality characteristics of grid connected wind turbines. Wind turbines part 22:Confirmity testing and certification Wind orbines p art 24: Lightning protection Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval. Photovoltaic systems - Power conditioners - Procedure for measunng efficiency. Photovoltaic (PV) systems - Characterrstics ofthe utility interface. Photovoltarc (PV) module safety qualification - Part 1: Requirements for construction. Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing. Photovoltarc (PV) module performance testing and energy rating Part l: Irradiance and temperature performance measurements and power rating Hydraulic machines-Acceptance tests of small hydroelectric installations Balance-of-system components for photovoltaic systems - Design qualification natural environments. Hydraulic machines, radial and axial-performance conversion methods from model to prototype Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval. Safety of power converters for use in photovoltaic power systems Part l: General requirements Safety of power converters for use in photovoltaic power systems Part 2: Particular requirements for .inverters Photovoltaic pumping systems Hydraulic turbines, storage pumps and pump turbines -Rehabilitation and performance improvement Grid connccted photovoltaic systems - Minimum requirements for system documentation, commissioning tests and inspection Battcry charge controllers for photovoltaic systems - Perfomance and functioning Fluorcscent induction lamps- Safety specifications Wind turbinc gcnerator systems - Part23: Full-scale structural testing of rotor blades. Solar photovoltaic encrgy systems - Terms, definitions and symbols. Photovoltaic (PV) stand-alone systems - Design verification. Recommcndations for small renewable energy and hybrid systems for rural elcctrification - Part 12-1: Selection of self- ballasted lamps (CFL) for rural electrification systems and recommendations for h Recommendations for small renewable energy and hybrid systems for rural electrification - Part 2: From requirements to a range of electrification systems. Recommendations for small renewable energy and hybrid systems for rural electrification - Part 3: Project development and management. Recommendations for small renewable energy and hybrid systems for rural electrification - Part 4: System selection and design. Recommendations for small renewable energy and hybrid systems for rural electrification - Part 5: Protection against electrical hazards. Recommendations for small renewable energy and hybrid systems for rural electnfication - Part 6: Acceptance, operation, maintenance and replacement. Recommendations for small renewable energy and hybrid systems for rural electrif,rcation - Part 7: Generators. Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic arrays. Recommendations for small renewable energy and hybrid systems for rural electrification - Pal 7-3: Generator set - Selection of generator sets for rural electrification systems. Recommendations for small renewable energy and hybrid systems for rural electrification - Pat9-2: Microgrids. Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-3: Integrated system - User interface. Recommendations for small renewable energy and hybrid systems for rural electrification - Part 4: Integrated system - User installation. Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-5: Integrated system - Selection of portable PV lantems for rural electrif,rcation projects. Technical specification-Recommendations for small renewable and hybrid systems for rural electrification part 7-1: Generators -photovoltaic generators Wind turbine generator systems - Section 415-01: Wind turbines and wind turbine generator systems. Recommendations for small renewable energy and hybrid systems for rural electrification - Part 1: General introduction to rural electrification. Recommendations for small renewable energy and hybrid systems for rural electrifrcation - Part 9-l: Micropower systems. Recommendations for small renewable energy and hybrid systems for rural. Technical energy systems - Basic concepts. Technical energy systems - Structure for analysis - Energyware supply and demand sectors. Technrcal energy systems - Methods for analysis - Part l: General. Technical energy systems - Methods for analysis - Part 2: Weighting and aggregation of energywares. Wind turbmes - Part 4: Design and specification of gearboxes. Reciprocating intemal combustion engine driven alternating current generating sets performance. Reciprocating intemal combustion engine driven altemating current generating sets - noise by the enveloping surface method. Reciprocating intemal combustion engine driven altemating cuffent generating sets - to safety devices. - Part 1: Application, ratings and Part l0: Medsurement of airbome Part 12: Emergency power supply lTth November,2017 THE KENYA GAZETTE 5965 KS ISO 8528-2:1993 Reciprocating intemal combustion engine driven altcrnating cunent generating sets - Part 2: Engines. KSISO 8528-3:1993 Reciprocating internal combustion engine driven altcmating current generating sets - Part 3: Altemating current generators for generating sets. KS ISO 85284:1993 Reciprocating internal combustion engine driven altcmating current generating sets - Part 4: Controlgealand switchgear. KS ISO 8528-5:1993 Reciprocating intemal combustion engine driven alternating curent gcnerating sets - Part 4: Generating sets. KS ISO 8528-6:1993 Reciprocating intemal combustion enginc drivcn altcrnating currcnt gencrating sets - Part 6: Test methods. KS ISO 8528-7:1993 Reciprocating intemal combustion cngine drivcn altcrnating curcnt generating sets - Part 7: Technical declarations for specification and design. KS ISO 8528-8:1993 Reciprocating intemal combustion enginc driven altemating current generating sets - Part 8: Low-power generating sets - Requiremcnts and tests. KS ISO 8528-9:1995 Reciprocating intemal combustion engine driven altcmating cunent generating sets - Part 9: Measurement and evaluation of mechanical vibrations. KS ISO 9459-1:1993 Solar heating - Domestic wator heating systems - Part l: Performance rating prccedure using indoor test methods. KS ISO 9459-2:1995 Solar heating - Domestic water heating systems - Part 2: Outdoor test methods for System Performance characterization and yearly Performance prediction of solar--only Systcms. KS ISO 9459-5:2007 Solar heating - Domestic water heating systcms - Part 5: Systcm performancc characterization by means of whole-system tests and computer simulation. KS ISO 9488:1999 Solarenergy - Vocabulary. KS ISO 9553:1997 Solar energy - Methods of testing preformed rubtrr scals and sealing compounds used in collectors. KS ISO 9806:2013 Solar energy Solar thermal collectors Test methods KS ISO 9806-1:1994 Test methods for solar collectors - Part l: Thermal performance of glazcd liquid heating collectors rncluding pressure drop KS ISO 9806-2:1995 Test methods for solar collectors - Part 2: Qualification test prccedurcs KSISO9806-3:1995 Test methods for solar collectors - Part 3: Thcrmal pcrformance of unglazcd liquid heating collectors (sensible heat transfer only) including pressure drop KS ISO 9846:1993 Solar encrgy - Calibration of a pyranometer using a pyrheliomcter. KS ISO/TR 9901:1990 Solar Energy - Field $ranometers - Recommcnded practice for use. KSIEC6I400-12-I:2005 Wind turbines -Paftlz-li Powerperformancc mcasurements of electricity producing wind turbines. KSIEC61400-25-I:2006 Wind turbines - Part 25-l: Communications for monitoring and control of wind power plants - Overall description of KSIEC61400-25-2:2006 t tri:i:|eii#:f;filt-r' communications for monitoring and conrol of wind powcr plants - Information modcls. KSIEC61400-25-3:2006 Wind turbincs - Part 25-3: Communications for monitoring and control of wind powcr plants - Information exchangc models. KSIEC6I400-25-4:2008 Wind turbincs - Part 25-4: Communications for monitoring and control of wind powcr plants - Mapping to communication profilc. KSIEC6I400-25-5:2006 Wind turbincs - Pan 25-5: Communications for monitoring and conrol of wind powcr plants - Conformance testing. KS IEC 61400-24:2010 Wind turbinc gcnerator systems - Part 24: Lightning protcction. KSIECTS6I40O-13:2001 Wind turbine generator systcms - Paft 13: Measurement of mechanical loads. KS 1322:1997 Specification for charcoal buming, ironing presses. KS 2520: 2014 Domestic biogas sloves - Specification KS 2521: 2014 Domestic biogas lamps Specification KS 2566-1: 2015 Design and consruction ofdomestic biogas plants Codc ofpractice Part l: General. KS 2566-2: 2015 Design and construction ofdomestic biogas plants - Code ofpracticc Part 2: Fixed dome KS 2566-3: 2014 Design and construction of domestic biogas plants - Codc of practice Part 3: Floating drum. KS2584:2015 fundamentalprinciples.eviationsand KS IEC 60904-l:2006 Photovoltaic devices - Part l: Measurement ofphotovoltaic current-voltage characteristics. KS IEC 60904-2:2007 Photovoltaic devices - Part 2: Requirements for reference solar cells. KS 1678-6:2003 Photovoltaic devices - Part 6: Requirements for reference solar modules. KS 1678-7:2003 Photovoltaic devices - Part 7: Computation of specral mismatch enor introduced in the testing of a photovoltaic device. KS 1680:2003 Overvoltage protection for photovoltaic (PV)power generating systems-guide KS 1860:2009 Solar heating systems for domestic hot watcr - Design, installation, repair and maintenance - Code of practice. KS 2542:2014 Off-grid solar photovoltaic lighting kits Requirements KS EAS 362:2N5 Solar photovoltaic power systems - Gloqsary. KS EAS 3634:2O05 Solar photovoltaic power systems - Test procedures for main components - Part 4: Tcst procedurcs for inverters. KS EAS 363-5:2005 Solar photovoltaic power systems - Test procedures for main componcnts - Part 5: Test procetlures for luminaires. KS IEC 61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval. KS IEC 61646:2008 Thin-frlm terrestrial photovoltaic (PV) modules - Dcsign qualification and type approval. KS EAS 366:2005 Characteristic parameters of standalone photovoltaic (PV) systems. KS EAS 389-3:2006 Solar photovoltaic power systems - Design, installatioh, operation, monitoring and maintenancc - Code of practice - Part 3: Operation of PV systems. KS IEC 60904-2:2007 Photovoltaic devices - Part 2: Requirements for reference solar devices. KS IEC 61400-l l:2006 Wind turbine gencrator systems - Part 1 1 : Acoustic noise measurement techniques. KS IEC 61zt00-4:2012 Wind turbines Part 4: Design requirements for wind turbine gearboxes KS IEC 621 16:2008 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters. KS ISO 9059:1990 Solar energy - Calibration of field pyrheliometers by comparison to a reference pyrheliometer. KS ISO 9060:1990 Solar energy - Specification and classification of instruments for measuring hemispherical solar radiation and direct solar radiation, KS ISO 9808:1990 Solar water heaters - Elastomeric materials for absorbers, connecting pipes and finings - Method of assessment. KS ISO 9845-1:1992 Solar energy - Reference solar spectral irradiance at the ground at different receiving conditions - Part l: Direct normal and hemispherical solar irradiance for air mass 1 ,5. KS ISO TR 10217:1989 Solar energy - Water hcating Systems - Guide to matcrial selection with regard to internal corrosion. KS IEC 60034-1 Rotating electrical machines Part 1: Rating and performance KS ISO 50001:2011 Energy management systems - Requirements with guidancc for use. KS I I 1-4:1985 Spccification for intruder alarm systems in buildings - Part 4: Central stations (Third Edition). KS 111-5:1985 Specihcation for Intruder Alarm Systems in buildings - Part 5: Detection devices for intemal use (Thkd Edition). KS 111-7:1985 Specification for Intrudcr Alarm Systems in buildings - Part 7: Alarm transmission systerns (Third Edition). KS ISO/IEC 101 18- I Information technology Security techniques Hash-functions Part I : General KS ISOiIEC l0l l8-2 Information technology Security techniques Hash-functions Part 2: Hash-functions using an n-bit block cipher 5966 THE KENYA GAZETTE, 17th November,2OlT Information technology - Security techniques - Non-repudiation - Part 3: Mechanisms using asymmetric techniques Information technology Security techniques Encryption algorithms Part 1: General Information technology Security techniques Encryption algorithms Part 2: Asymmetric ciphers Information technology Security techniques Encryption algorithms Part 3: Block ciphers Information technology Securiry techniques Encryption algorithms Part 4: Stream ciphers Information technology- Security techniques - Selection, deployment and operations of intrusion detection systems Information technology Security techniques Authenticated encryption Information technology- Biometric data interchange formats Part l: Framework Information technology- Biometric data interchange formats Part l0: Hand geometry silhouene data Information technology- Biomefic data interchange formats Part 3: Finger pattem spectral data Information technology Biometric profiles for interoperability and data interchange Part 3: Biometrics-based verification and identification of seafarers Information technology Identification cards On-card biometric comparison techniques Guidelines forcurity cybersecurity Information technology Security techniques Network security Part 4: Securing communications between networks using security gateways Information technology-Security techniques-Network security Part 3 : techniques and control issues Information technology-Security techniques-Network security Part 5: Virtual Private Networks (VPNSs) Information technology Security techniques Information security incident management Information technology Security techniques Guidelines for identification, collection, acquisition, and preservation of digital evidence Information technology Security techniques Signcryption Information technology Security techniques Requirements for partially anonymous, partially unlinkable autlentication Information technology Security techniques Lightweight cryptography Part 2: Block ciphers Information technology Security techniques Lightweight cryptography Part 3: Stream ciphers Information technology Security techniques Digital signature schemes giving message recovery Pal 2: lnteger factorization based mechanisms Information technology Security techniques Digital signature schemes giving message rccovery Part 3: Discrete logarithm based mechanisms Information technology - Security-Entity authentication - Part l: Geheral Information technology - Securiry techniques - Entity authentication - Part 2: Mechanisms using symmetric encipherment algorithms Information technology-Security techniques -Guidelines for the use and management of trusted thild parry services Information technology - Security techniques - Information security incident management Information technology Security techniques Best practices for the provision and use of time-stamping services Information technology Security techniques Modes of operation for an nbit block cipher Information technology - Security techniques - Code of practice for information security management. Information technology - Security techniques - Guidelines for information and communications technology disaster recovery services. Information technology - Security techniques - Entity authentication - Part 3: Mechanisms using digital signature techniques. Information technology - Security techniques - Entity authentication - Part 4: Mechanisms using a cryptographic check function. Information technology - Security techniques - A framework for IT security assurance - Part 3: Analysis of assuance methods Information technology - Security techniques - IT network security - Part 4: Securing remote access Information technology - Securiry techniques - IT network security - Part 5: Securing communications across networks using virtual private networks Information technology - Home network security - Part 1: Security requirements. Information processing - Control functions for 7-bit and 8-bit coded character sets. Information technology - Programming languages - Pascal. Information Technology - Software packages - Quality requirements and testing. Information technology - Software life cycle processes. Programming language processors - Test methods - Guidelines for their development and acceptability. Safety requirements for electrically energized office machines. Information technology equipment - Safety requirements. Unintemrptible power systems (LIPS) - Part 2: Electromagnetic compatibility (EMC) requirements. Unintemrptible power systems (LJPS) - Part 3: Method of specifying the performance and test requirements. Unintem.rptible power systems (LJPS) - Part l-l: General and safety rcquirements for UPS used in operator access areas. Unintemrptible power systerns (UPS) - Part l-2: General and safety requirements for UPS used in restricted access locations. KS ISO.1087-2:2000 Terminology work - Vocabulary - Part 2: Computer applications. KS ISO I8C15018:2004 Information technology - Generic cabling for homes. KS ISO IEC180l0:2ffi2 Information Technology - Pathways and spaces for customer premises cabling. KS ISO IECTR 14763-2 Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation. ISO/IEC 2fin0-3 Information technology Service management Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-l KS ISO/IEC I3888-3 KS rSO/rEC 18033-l KS ISO/IEC 18033.2 KS ISO/IEC 18033-3 KS ISO/IEC 18033-4 KS ISO/IEC 18043 KS ISO/IEC 19772 KS ISO/IEC 19794-I KS ISO/IEC 19794-IO KS rSO/rEC t9794-3 KS ISO/IEC 247t3-3 ISO/IEC 24787:201O KS ISO/IEC 27 033 -4:2fr | 4 KS ISO/IEC 27 033 -3 :201 4 KS ISO/IEC 27 033 -5 :2fr 13 KS ISO/IEC 27035 KS ISO/IEC 27037 ISO/IEC 29150:2011 KS ISO/IEC 29191 KS ISO/IEC 29192-2 KS ISO/IEC 29192-3 KS ISO/IEC 9796.2 KS ISO/IEC 9796-3 KS ISO/IEC 9798.I KS ISO/IEC 9798-2 KS ISO/IEC TR I4516 KS ISO/IEC 27O35:2011 ISO/IEC TR29149 KS ISO/IECIOl16:2N6 KS ISOIEC l'7799:20O5 KS ISOIEC 24762:2ffi8 KS ISOIEC9798-3:1998 KS ISOIEC97984:1999 KS ISOIECTR 15443.3 KSISOIEC I 8028-4:2005 KS ISO/IEC 27033-5 KSISOIEC24767-l:2008 KS ISO IEC 6429:1988 KS ISO IEC 7185:1990 KS ISO IEC12119:1994 KS ISO IECl2207:2008 KS ISO TR 9547:1998 KS 474:1982 KS EAS 390:2005 KS IEC 62040-2:199 KS IEC 620,10-3:1999 KS IEC620,|O-1-1:2002 KSIEC62O4O-I-2:2OO2 KSISOIECI4763-l:1999 KSISOIECl4763-3:2000 KS 1338:1996 KS ISO 10196:2003 KS IEC 60950-1:2005 KS IEC 62018-2003 KS IEC 62075:2008 Dated the 30th May,2017 MR/3483046 Reference networking scenarios-Threats, design Securing communications across networks using Information technology - Implementation and operation of customer premises cabling - Part 1: Adminismtion. Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling. Specification for engineer's files. Document imaging applications - Recommcndations for the creation of original documents. Information technology equipment- Safety- General requirements Power consumption of information technology equipment- Measurement methods Audio/video, information communication technology equipment- Environmentally conscious design ADAN ABDI]LLA MOHAMED, Cabinet Secretary for Industrialization and Enterprise Development. lTth November,2OlT THE KENYA GAZETTE 5967 cAzE'r-rE NoflcE No. I 1446 THE ENERGY REGULATORY COMMISSION SCHEDULE OF TARIFFS 2013 FOR ELECTRICITY TARIFFS, CHARGES, PRICES AND RATES FUELCoSTCHARGE PURSUANTtoclause l of PartIIIof the Scheduleof Tariffs2013,noticeisgiventhatallpricesfor electrical energyspecifiedin Part IIof the said Schedulewill beliable toafuel costchargeof plus 435KenyacentsperkWh for allmeter readingstobetakeninNovember,20lT. Information used to calculate the fuel cost charge. Total units generated and purchased including hydros, excluding exports in October, 201'7 (G) = 874,383,150 kWh ROBERT PAVEL OIMEKE, MN2484378 Ag. Director-General. Power Station Fuel Price in October, 2017 KSh/Ks. (Ci) Fuel Displacement Charge/ Fuel Charge, October 2017 KSh./kwh Variationfrom September,20l7 Prices Increase/( Decrease ) Units in October,20l7 inkWh(Gi) Kipevu I Diesel Plant 4t.84 0.54 24.185.000 Kioevu II Diesel Plant (Tsavo) 44.46 (3.21), 25.741.1OO Kipevu III Diesel Plant 41.86 1.09 5l,775,000 Embakasi Gt l-Muhoroni 84.05 4.10 406,2q Embakasi Gt 2-Embakasi 96.36 Rabai Diesel without Steam Turbine 42.83 0.87 Rabai Diesel with Steam Turbine 42.83 0.87 50.r09.000 Iberafrica Diesel 48.33 0.64 5.587.910 Iberafrica Diesel-Additional Plant 47.72 0.97 20,405.020 Ihika Power Diesel Planl 52.62 0.76 1,630,1m fhika Power Diesel Plant (with steam unit) 52.62 o.76 21 ,815,600 Gulf Power 56.47 3.01 15.636.096 Iriumoh Power 55.00 0.34 1.662.800 friumph Power 55.00 0.34 1025.500 Mumias Susar Comoanv 3.52 0.01 Bioioule 7.24 0.02 13.600 Regen-Terem 7.60 0.o2 1,575,t59 [-hqnir 7.60 0.02 30-572 lura 1.60 0.02 1,402.342 )lkaria IV Steam Charse 2.0'7 0.01 98-838.767 )lkaria I Unit IV and V Steam Charse 2.07 0.01 89,418,576 Joower 4 20.368.360 Jetcl Import (Non-commercial) 9.89 0.06 2,86't,033 Jetcl Imoort (Commercial) t5.57 o.26 rr.755.722 Jercl Export (Non-commercial) 9.89 0.06 (r,720,375) Jetcl Exoort(Commercial) 9.61 0.1 I iarissa Diesel (Kensen) 85.32 Sarissa Diesel (Aesrekko. KenGen) 85.32 iarissa Diesel (Assrekko. GoK) 85.32 -ame 79.84 -odwarDiesel (Thermal) tt.23 5.15 830.269 Vlandera Diesel (Thermal) 20.85 3.25 907,010 Vlarsabit Diesel (Thermal) o7.78 0.18 453.687 Waiir Diesel 11.08 2.O7 844,761 VlovaleDiesel (Thermal) 13.10 (0.86) 4.737 Vlerti (Thermal) 23.r9 38.1 l3 i{abaswein (Thermal) o7.78 (1.69) r28,286 llwak (Thermal) 14.85 3.62 I 19.309 Baragoi 17.21 27,657 Vlfansano (Thermal) 49.86 2.29 54-055 'nkichosio t3.97 1.92 1t7,283 takaba (Thermal) 20.57 9.76 54.067 3ldas t5.67 4.t3 36,326 lhamu 16.04 t.t1 40.512 -atsamts 91.26 l7 -951 \orth Horr 32.58 73.90 7,426 -,okori 49.t9 11.729 Daadab 02.85 6.67\ 116,703 Faza-Island 62.t1 12.976 Lokitaung 39.7 | 4,820 Kiunsa 28.28 I 1.846 CAzEr-rE NorcE No. I lzl47 THE ENERGY REGULATORY COMMISSION . SCTIEDULE OF TARIFFS 2013 FOR ELECTR.ICITY TARIFFS, CHARGES, PRICES AND RATES FoREIGN EXCHANGE FLUCTUATIoN ADJUSTMENT PURSUANT to clause 2 of Part III of thc Schedule of Tariffs 2013, notice is given that all prices for electrical energy specified in Part II of the said Schedule will be liable to a foreign exchange fluctuation adjustmcnt of plus 82 Kenya cents per kWh for all meter readings to be taken in November,2017. Information used to calculate the sdjustrnent: KenGen (FZ) KPLC (HZ) tPPs (IPPZ) Total (ZF+ZIl+IPPZ) Exchange Gainl(Inss) 18,672,8s8.69 163,527,420.83 t21,149,436.s2 503,349,716.M l I j Total units generated and purchascd (G) Excluding exports in October,20l7 = 874,383,150 kWh MR/2484378 ROBERT PAVEL OIMEKE, Ag. Director-General. GAZETTENqncENo. 11448 THE ENERGY REGULATORY COMMISSION SCTIEDULE OF TARIFFS 2013 FOR ELECTRICITY TARIFFS, PRICES, CHARGES AND RATES WATER RESoURCE MANAGEMENT AI..nHoRITY LEVY PLJRSUANTtoclause5of PartIlIof the Schedule of Tariffs 2013,noticeisgivcn thatall pricesfor electricalenergyspecifiedinPartll- (A) of the said Schedule will be liable to a Water Resource Management Authority (WRMA) levy of plus 1.47 Kenya cents pcr kWh for all meter readings to be taken in Novembcr,2017. Information used to calculatc the WRMA [.evy: Approved WRMA levy for energy purchased from hydropower plants of capacity equal to or above IMW = 5 Kenya ccnts per KWh. Hydropower Plant Units Purchased in September,20lT (KWh.) Gitanr 31.388.000 (amburu 15.239.mO Kiamberc 13.902.000 (indaruma .530.250 Vlasinsa +.089.000 lana 7,384.67t Wqniii 2-306-615 Sasana ,17.2(A Ndula Iurkwel t3-392,160 oso 710.341 Sondu Miriu {3.405.m0 Sangoro 14.862.160 Regen-Terem 1.575.159 hania 30.572 Gura t.402,342 Total units purchased frcm hydropower plants with capacity equal to or above IMW 216,534,534 kWh Total units gcnerated and purchased including hydros excluding exports in October,2017 = 874,383,150 kWh MR/2484378 ROBERT PAVEL OIMEKE, Ag. Director-General. GAZE,I-TE NoTIcE No. I 1449 THE KENYA INFORMATION AND COMMT]NICATIONS ACT (Cap.4llA) APPUCATIoN FoR LICENCES NOTICE is given that the following applicants havc, pursuant to the provisions of the Kenya lnformation and Communications Act, made ap,plications to the Communications Authority of Kenya for the grant of thc licences as below - The licences, if granrcd, will cnable the applicants !o operatc and provide the sewices as indicated above against their names. The grant of these licences may affcct public and local authoritics, compaiies, persons or bodies of pcrsons within thc country. The Authority wishes to noti$ thc gcncral public that any lcgal or natural pcrson, or group of individuals, who arc dcsirous of making any rcprescntation and/or any objection to the said applications herein, to do so vide a letrcr addrcsscd to; Director{qreral, Communications Authority of Kenya, CA Ccntre, Waiyaki Way, P.O. Box 14448- 0O8m, Naircbi indicrting thc Liccncc Catcgory on the covcr cnclosing Yamz Ucence Category Tv Africa-Kenya Holdings Limited (Emoo Fm) P.O. Box 103618- fi)101. Nairobi Commercial FM Radio Broadcasting Licence Narok Star Shuttle Sacco Society Limitcd P.O. Box 89-20500. Narok National PostaUCouricr Operator Name Licence Category Herocs Communications Limited P.O. Box 34-101O7- Thika 3ommercial free+o-air, felevision Bmadcastinp Licence Kenya Sustainable Health Aid-CBC (KESHA) P.O. Box 173-70101. Hola Sommunity free-to-air Ielevision Btoadcasting Licence lTth November,2OlT THE KENYA GAZETTE 5969 I it. The said representation and/or objection must be hled on or before expiry of thirty (30) days from the date of this notice and the copy of the same be forwarded to the concerned applicant. Dated the 13th November.2017 YtG 3594/l-t-18 FRANCIS W. WANGUSI, Director-General. GAZE.I-rE NoTCE NO. 1 1450 THE PHYSICAL PLANNING ACT (Cap.286) CoMPLETIoN OF PART DEVELOPMENT PLAN PDP No. KN/l&/2017/2-Existing Residential Plot Nos. 18, 87, 108 and 194, Ngong Township NOTICE is given that the above-mentioned part development plan was on 19th October,2017. completed. The part development plan relates to land situated within Ngong Township. Copies of the part development plan have been deposited for public inspection at the off,rces of the County Executive Committee Member for Lands, Physical Planning and Urban Development, and the offrce of the County Physical Planning Officer, Kajiado. The copies so deposited are available for inspection free of charge by all persons interested at the offrces of the Counry Executive Committee Member for Lands, Physical Planning and Urban Development, and the office of the County Physical Planning Officer, Kajiado, between the hours of 8.00 a.m. to 5.00 p.m., Monday to Friday. Any interested person who wishes to make any representation in connection with or objection to the above-named part development plan may send such representations or objections in writing to be received by the County Physical Planning Ofhcer, P.O. Box ll, Kajiado, within sixty (60) days from the date of publicatron of this notice and such representation or objection shall state the grounds on which it is made. Dated the 23rd Octobet 2Ol7 . MR/3556593 ISAACK. PARASHINA, for Director of Physical Planning GAZE-|.IE NoTICE No. I I45 I THE PHYSICAL PLANNING ACT (Cap.286) CoMPLETIoN oF PART DEVELoPMENT PI-AN PDP No. KAJ/527/2017/6-Existing Residential Plot No. C314, Ongata Rongai Township NOTICE is given that the above-mentioned part developmeni plan was on l9th October,20l7, completed. The part development plan relates to land situated within Ongata Rongai Township. Copies of part the development plan have been deposited for public inspection at the offices of the County Executive Committee Member for Lands, Physical Planning and Urban Development, and the office of the County Physical Planning OfFrcer, Kajiado. The copies so deposited are available for inspection free of charge by all persons interested at the offices of the County Executive Committee Member for Lands, Physical Planning and Urban Development, and the office of the County Physical Planning OfFrcer, Kajiado, between the hours of 8.00 a.m. to 5.00 p.m., Monday to Friday. Any interested person who wishes to make any representatron in connection with or objection to the above-named part development plan may send such representations or objections in writing to be received by the County Physical Planning Officer, P.O. Box 11, Kajiado, within sixty (60) days from the date of publication of this notice and such representation or objection shall state the grounds on which it is made. Datcd the 23rd Octobet, 2O17. ISAACK. PARASHINA, for Director of Physical Planning.MR/34831 14 MFy3556627 Officer, Claims. GAZETTE NoTICE No. I 1452 THE PHYSICAL PLANNING ACT (Cap.286) CoMPLE'floN oF DEVELoPMENT PLAN PDP No. ELD 17/2016103-Proposed Sites for Industrial Plots in Eldoret Municipality NOTICE is given that the above-mentioned development plan was on 23rd Decembe\2016, completed. The development plan relates to land situated within the County Govemment of Uasin Gishu. Copies of the development plan have been deposited for public inspection at the County Physrcal Planning Offrce, Ardhi House, Eldoret and the Deputy Commissioner of Uasin Gishu. The copies so deposited are available for inspection free of charge by all persons interested at the County Physical Planning Office, Ardhi House, Eldoret and the Deputy Commissioner of Uasin Gishu, between the hours of 8.00 a.m. to 5.00 p.m., Monday to Friday. Any interested person who wishes to make any representation in connection with or objection to the above-named development plan may send such representations or objections in writing to be received by the County Physical Planning Officer, P.O. Box l46zt-30100, Eldoret, within sixty (60) days from the date of publication of this notice and such representation or objection shall state the grounds on which it is made. Dated the 28th July.2017. MR/3556834 GERTRUDEK. RAPONG'O, Jor Director oJ Physical Planning, GAzE'rrE NoncE No. I 1453 OLD MUTUAL LIFE ASSURANCE COMPANY LIMITED (lncorporated in Kenya) Head Office: P.O. Box 30059-{0100, Nairobi LOSS OF POLICY Policy No.37008043 in the name of Ken Mumo Mindu. APPLICATION has been made to this company for the issue of duplicate of the above-numbered policy, the original having been reported as lost or misplaced. Notice is given that unless objection is lodged to the contrary at the office of the company within thirty (30) days from the date of this notice, duplicate policy will be issued, which will be the sole evidence of the contract. Dated the 27 th October, 2017 . JOSEPHINE SANYA, MR/3556627 Oficer, Claims GAZE,I-rE NoTIcE NO. I 1454 OLD MUTUAL LIFE ASSURANCE COMPANY LIMITED (Incorporated in Kenya) Head Ofhce: P.O. Box 30059-{0100, Nairobi LosS oF PoLIcY Policy No.37003016 in the name oJ Niclq Jilloh Ruphus. APPLICATION has been made to this company for the issue of duplicate of the above-numbered policy, the original having been reported as lost or misplaced. Notice is given that unless objection is lodged to the contrary at the office of the company within thirty (30) days from the date of this notice, duplicate policy will be issued, which will be the sole evidence of the contract. Dated the 27 th October, 2017 . JOSEPHINE SANYA, 5970 THEKENYA GAZETTE 17th November,2OlT