GAZETTE NOTICE NO. 5475

PURSUANT to section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the Schedule hereto, to be Kenya Standards, with effect from the date of publication of this notice. Number Title of Specification or Code of Practice Food KS 2128:2022 Kenya Standard—Tea industry—Code of practice, Fourth Edition KS 2404:2022 Kenya Standard—Tea—Raw material for extraction—Specification, Second Edition Agriculture KS 2500:2022 Kenya Standard—Dairy cattle feed premix— Specification Second Edition KS 2508:2022 Kenya Standard—Poultry feed premixes — Specification, Second Edition KS 2957:2022 Kenya Standard—Compounded indigenous (Kienyeji) chicken feed—Specification, First Edition Chemical KS ISO 1170:2020 Kenya Standard—Coal and coke—Calculation of analyses to different bases, Second Edition KS ISO 556:2020 Kenya Standard—Coke (greater than 20 mm in size)—determination of mechanical strength, Second Edition KS ISO 622:2016 Kenya Standard—Solid mineral fuels— Determination of phosphorus content—Reduced molybdophosphate photometric method, Second Edition GEN. (RTD) JULIUS W. KARANGI (DR.), Chairman, Board of Trustees. KS ISO 1213-2:2016 Kenya Standard—Solid mineral fuels — Vocabulary —Part 2: Terms relating to sampling, testing and analysis, Second Edition KS ISO 334:2020 Kenya Standard—Coal and coke— Determination of total sulfur—Eschka method, Second Edition KS ISO 1013:2020 Kenya Standard—Coke—Determination of bulk density in a large container, Second Edition KS ISO 540:2008 Kenya Standard—Hard coal and coke— Determination of ash fusibility, Second Edition KS ISO 587:2020 Kenya Standard—Coal and coke— Determination of chlorine using Eschka mixture, Second Edition KS ISO 925:2019 Kenya Standard—Solid mineral fuels— Determination of carbonate carbon content — Gravimetric method, Second Edition KS ISO 15590-1:2018 Kenya Standard—Petroleum and natural gas industries—Induction bends, fittings and flanges for pipeline transportation systems—Part 1: Induction bends, Second Edition KS ISO 15590-2:2021 Kenya Standard—Petroleum and natural gas industries—Factory bends, fittings and flanges for pipeline transportation systems—Part 2: Fittings, Second Edition KS ISO 5163:2014 Kenya Standard—Petroleum products— Determination of knock characteristics of motor and aviation fuels—Motor method, Second Edition KS ISO 5164:2014 Kenya Standard—Petroleum products— Determination of knock characteristics of motor fuels—Research method, Second Edition KS ISO 5598:2020 Kenya Standard—Fluid power systems and components—Vocabulary, Second Edition KS ISO 3016:2019 Kenya Standard—Petroleum and related products from natural or synthetic sources— Determination of pour point, Second Edition KS ISO 8216-1:2017 Kenya Standard—Petroleum products—Fuels (class F) classification—Part 1: Categories of marine fuels, Second Edition KS ISO 8217:2017 Kenya Standard—Petroleum products—Fuels (class F)—Specifications of marine fuels, Second Edition KS ISO 12156-1:2018 Kenya Standard—Diesel fuel—Assessment of lubricity using the high-frequency reciprocating rig (HFRR)—Part 1: Test method, Second Edition KS ISO 12156-2:2017 Kenya Standard—Diesel fuel—Assessment of lubricity using the high-frequency reciprocating rig (HFRR)—Part 2: Limit, Second Edition KS ISO 12917-1:2017 Kenya Standard—Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks—Part 1: Manual methods, Second Edition KS ISO 13357-1:2017 Kenya Standard—Petroleum products— Determination of the filterability of lubricating oils—Part 1: Procedure for oils in the presence of water, Second Edition KS ISO 13357-2:2017 Kenya Standard—Petroleum products— Determination of the filterability of lubricating oils—Part 2: Procedure for dry oils, Second Edition KS ISO 20846:2019 Kenya Standard—Petroleum products— Determination of sulfur content of automotive fuels—Ultraviolet fluorescence method, Second Edition KS ISO 2137:2020 Kenya Standard—Petroleum products and lubricants—Determination of cone penetration of lubricating greases and petrolatum, Second Edition KS ISO 3015:2019 Kenya Standard—Petroleum and related products from natural or synthetic sources— Determination of cloud point, Second Edition KS ISO 3104:2020 Kenya Standard—Petroleum products— Transparent and opaque liquids—Determination of kinematic viscosity and calculation of dynamic viscosity, Second Edition KS ISO 3405:2019 Kenya Standard—Petroleum and related products from natural or synthetic sources— Determination of distillation characteristics at atmospheric pressure, Second Edition KS ISO 3924:2019 Kenya Standard—Petroleum products— Determination of boiling range distribution— Gas chromatography method, Second Edition KS ISO 4264:2018 Kenya Standard—Petroleum products— Calculation of cetane index of middle-distillate fuels by the four variable equation, Second Edition KS ISO 5165:2020 Kenya Standard—Petroleum products— Determination of the ignition quality of diesel fuels —Cetane engine method, Second Edition KS ISO 6246:2017 Kenya Standard—Petroleum products —Gum content of fuels —Jet evaporation method, Second Edition KS ISO 384:2015 Kenya Standard—Laboratory glass and plastics ware—Principles of design and construction of volumetric instruments, Second Edition KS ISO 4797:2015 Kenya Standard—Laboratory glassware— Boiling flasks with conical ground joints, Second Edition KS ISO 4802-1:2016 Kenya Standard —Glassware — Hydrolytic resistance of the interior surfaces of glass containers—Part 1: Determination by titration method and classification, Second Edition KS ISO 4802-2:2016 Kenya Standard — Glassware — Hydrolytic resistance of the interior surfaces of glass containers—Part 2: Determination by flame spectrometry and classification, Second Edition KS ISO 6556:2012 Kenya Standard—Laboratory glassware—Filter flasks, Second Edition KS ISO 4803:2021 Kenya Standard—Laboratory glassware — Borosilicate glass tubing, Second Edition KS ISO 10545-10:2021 Kenya Standard—Ceramic tiles—Part 10: Determination of moisture expansion, Second Edition KS ISO 10545-15:2021 Kenya Standard—Ceramic tiles—Part 15: Determination of lead and cadmium given off by tiles, Second Edition KS ISO 17721-1:2021 Kenya Standard—Quantitative determination of antibacterial activity of ceramic tile surfaces— Test methods—Part 1: Ceramic tile surfaces with incorporated antibacterial agents, First Edition KS IEC 60068-1:2013 Kenya Standard—Environmental testing—Part 1: General and guidance, Second Edition KS ISO 5667-1:2020 Kenya Standard—Water quality— Sampling — Part 1: Guidance on The Design of Sampling Programmes, Second Edition KS ISO 5667-3:2018 Kenya Standard—Water quality— Sampling — Part 3: Preservation and handling of water samples, Second Edition KS ISO 5667-6:2014 Kenya Standard—Water quality— Sampling — Part 6: Guidance on sampling of rivers and streams, Second Edition KS ISO 5667-10:2020 Kenya Standard—Water quality— Sampling — Part 10: Guidance on Sampling of waste waters, Second Edition KS ISO 7393-2:2017 Kenya Standard—Water quality— Determination of free chlorine and total chlorine—Part 2: Colorimetric method using N,N-dialky1-1,4-phenylenediamine, for routine control purposes, Second Edition KS ISO 10703:2021 Kenya Standard—Water quality— Determination of the activity concentration of radionuclides by high resolution gamma ray spectrometry, Second Edition KS ISO 11260:2018 Kenya Standard—Soil quality—Determination of effective cation exchange capacity and base saturation level using barium chloride solution, Second Edition KS ISO 15800:2019 Kenya Standard—Soil quality— Characterization of soil with respect to human exposure, Second Edition Cosmetics KS ISO 1272:2000 Kenya Standard—Essential oils—Determination of content of phenols, Second Edition KS ISO/TS 210:2014 Kenya Standard—Essential oils—General rules for packaging, conditioning, and storage, Second Edition KS ISO/TS 211:2014 Kenya Standard—Essential oils—General rules for labelling and marking of containers, Second Edition KS ISO 212:2007 Kenya Standard—Essential oils—Sampling, Second Edition KS ISO 3218:2014 Kenya Standard—Essential oils—Principles of nomenclature, Second Edition 13th May, 2022 THE KENYA GAZETTE 2541 Kenya Standard—Oil of cananga (Cananga odorata (Lam.) Hook. f. et Thomson, forma macrophylla), Second Edition Kenya Standard—Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume), Second Edition Kenya Standard—Oil of amyris (Amyris balsamifera L.), Second Edition KS ISO 14064-3:2019 Kenya Standard—Greenhouse gases—Part 3: Specification with guidance for the verification and validation of greenhouse gas statements, Second Edition KS ISO 14040:2006/Amd 1:2020 Kenya Standard—Environmental management—Life cycle assessment— Principles and framework—AMENDMENT 1, First Edition KS ISO 3523:2002 KS ISO 3524:2003 KS ISO 3525:2008 KS ISO 3848:2016 KS ISO 3849:2003 KS ISO 4720:2018 KS ISO 4724:2004 KS ISO 4725:2004 KS ISO 4727:2021 KS ISO 4730:2017 KS ISO 709:2001 Kenya Standard—Essential oil of citronella, Java type, Second Edition Kenya Standard—Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.), Second Edition Kenya Standard—Essential oils — Nomenclature; Second Edition Kenya Standard—Oil of cedarwood, Virginian (Juniperus virginiana L.), Second Edition Kenya Standard—Oil of cedarwood, Texas (Juniperus mexicana Schiede), Second Edition Kenya Standard—Essential oil of palmarosa [Cymbopogon martini (Roxb.) W. Watson var. motia], Second Edition Kenya Standard—Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil), First Edition Kenya Standard—Essential oils—Determination of ester value, Second Edition KS ISO 11930:2019 Kenya Standard—Cosmetics—Microbiology — Evaluation of the antimicrobial protection of a cosmetic product; Second Edition KS ISO 20809:2017 Kenya Standard—Essential oil of cypress (Cupressus sempervirens L, First Edition Services KS ISO/IEC 11179-1:2015 Kenya Standard —Metadata registries (MDR)—Part 1: Framework, First Edition KS ISO/IEC 11179-2:2019 Kenya Standard —Metadata registries (MDR)—Part 2: Classification, First Edition KS ISO/IEC 11179-3:2013 Kenya Standard —Metadata registries (MDR)—Part 3: Registry metamodel and basic attributes, First Edition KS ISO/IEC 11179-4:2004 Kenya Standard—Metadata registries (MDR)—Part 4: Formulation of data definitions, First Edition KS ISO/IEC 11179-5:2015 Kenya Standard—Metadata registries (MDR)—Part 5: Naming Principles, First Edition KS ISO/IEC 11179-6:2015 Kenya Standard —Metadata registries (MDR)—Part 6: Registration, First Edition KS ISO/IEC 11179-7:2019 Kenya Standard —Metadata registries (MDR)—Part 7: Metamodel for data set registration, First Edition KS ISO/IEC 11179-30:2019 Kenya Standard —Metadata registries (MDR)—Part 30: Basic attributes of metadata, First Edition KS 1SG:1414031:2021 Kenya Standard—Environmental management— Environmental performance evaluation — Guidelines, Second Edition KS ISO 14064-1:2018 Kenya Standard—Greenhouse gases—Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals, Second Edition KS ISO 14064-2:2019 Kenya Standard—Greenhouse gases—Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements, Second Edition KS ISO/IEC 17030:2021 Kenya Standard—Conformity assessment— General requirements for third party marks of conformity, Second Edition KS ISO 30415:2021 Kenya Standard—Human resource management—Diversity and inclusion, First Edition KS ISO/TS 30421:2021 Kenya Standard—Human resource management—Turnover and retention metrics, First Edition KS ISO/TS 30428:2021 Kenya Standard—Human resource management— Skills and capabilities metrics cluster, First Edition KS ISO/TS 30430:2021 Kenya Standard—Human resource management—Recruitment metrics cluster, First Edition KS ISO/TS 30433:2021 Kenya Standard—Human resource management—Succession planning metrics cluster, First Edition KS ISO 29994:2021 Kenya Standard—Education and learning services—Requirements for distance learning, First Edition KS 2925:2022 Kenya Standard—Textiles—Reusable sanitary towels—Specification, Second Edition Leather and Textile KS ISO 2076:2021 Kenya Standard—Textiles—Man-made fibres— Generic names, Second Edition KS ISO 2307:2019 Kenya Standard—Fibre ropes—Determination of certain physical and mechanical properties, Second-Edition KS1S0 2403:2021 Kenya Standard—Textiles-Cotton fibres— Determination of micronaire value, First'Edition KS ISO 405-B10:2011 Kenya Standard—Textiles—Tests for colour fastness—Part 810: Artificial weathering — Exposure to filtered xenon-arc radiation, First Edition KS ISO' 05-B03:2017 Kenya Standard—Textiles—Tests for colour fastness—Part B03: Colour fastness •to weathering: Outdoor exposure, Second Edition K836'03071:2020 Kenya Standard --Textiles —Determination of pH of aqueous extract, Second Edition KS ISO 1833-20:2018 Kenya Standard—Textiles—Quantitative chemical analysis—Part 20: Mixtures of elastane with certain other fibres (method using dimethylacetamtde), First Edition KS 150 1833-22:2020 Kenya -Standard—Textiles—Quantitative chemical analysis—Plitt 22:Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride), Second Edition KS ISO 3175-1:2017 KenyaStanclattl—Textlies--:Pmfessional care, drycleaning and wetcleaning of fabrics and garments—Part 1: 'Assessment of performance after: it arkPirritiaMog,freeend Edition KS4S03175-22017 41kettya *midst —"Petrilles--Professiortal care, dutletatatg and weteleaniog Sibrics and garments—Part :2: Procedure for wooing prtformance when eleaniog 4ittl 440taidog, Second Edition KS ISO 3175-3:2017 Kenya Standard—Textiles—Professional care, drycleaning and wetcleaning of fabrics and garments—Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents, Second Edition KS ISO 3175-4:2018 Kenya Standard—Textiles—Professional care, drycleaning and wetcleaning of fabrics and garments—Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning, Second Edition KS ISO 30023:2021 Kenya Standard — Textiles — Qualification symbols for labelling work wear to be industrially laundered, Second Edition KS ISO 6330:2021 Kenya Standard—Textiles—Domestic washing and drying procedures for textile testing, Second Edition KS ISO 11612:2015 Kenya Standard—Protective clothing—Clothing to protect against heat and flame - Minimum performance requirements, Second Edition KS ISO 20743:2021 Kenya Standard—Textiles—Determination of antibacterial activity of textile products, Second Edition KS ISO 21723:2019 Kenya Standard—Buildings and civil engineering works — Modular coordination — Module, First Edition KS ISO 6707-2:2017 Kenya Standard—Buildings and civil engineering works — Vocabulary —Part 2: Contract and communication terms, Second Edition KS ISO 6946:2017 Kenya Standard—Building components and building elements AE" Thermal resistance and thermal transmittance—Calculation methods, Second Edition KS ISO 3008-1:2019 Kenya Standard—Fire resistance tests—Door and shutter assemblies—Part 1: General requirements, First Edition KS ISO 4211-5:2021 Kenya Standard—Furniture—Tests for surface finishes—Part 5: Assessment of resistance to abrasion, First Edition KS ISO 5323:2019 Kenya Standard—Wood flooring and parquet — Vocabulary, Second Edition KS ISO 6442:2005 Kenya Standard—Door leaves—General and local flatness—Measurement method, Second Edition KS ISO 6443:2005 KS ISO 6444:2005 KS ISO 6445:2005 KS ARS 1694:2021 Kenya Standard—Medical respirators — Specification, First Edition KS ISO 10361:2015 Kenya Standard—Textile floor coverings— Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester, Second Edition KS ISO 1765:1986 Kenya Standard—Machine-made textile floor coverings—Determination of thickness, First Edition Kenya Standard—Door leaves—Method for measurement of height, width, thickness and squareness, Second Edition Kenya Standard—Door leaves—Determination of the behaviour under humidity variations in successive uniform climates, Second Edition Kenya Standard—Doors—Behavior between two different climates—Test method, Second Edition KS ISO 6530:2005 Kenya Standard—Protective clothing— Protection against liquid chemicals—Test method for resistance of materials to penetration by liquids, Second Edition KS ISO 9405:2015 Kenya Standard—Textile floor coverings— Assessment of changes in appearance, Second Edition KS ISO 2424:2007 Kenya Standard—Textile floor coverings — Vocabulary, Second Edition KS 606:2022 Kenya Standard—Polyester and cotton blended bedsheets — Specification, Third Edition KS 559-1:2022 Kenya Standard —Mens and boys' trousers — Specification —Part 1: Making up requirements, Fourth Edition KS ISO 13938-1:2019 Kenya Standard—Bursting properties of fabrics—Part 1: Hydraulic method for determination of bursting strength and bursting distension, Second Edition KS ISO 13938-2:2019 Kenya Standard—Textiles—Bursting properties of fabrics—Part 2: Pneumatic method for determination of bursting strength and bursting distension, Second Edition KS 525:2022 Kenya Standard—Ladies' briefs — Specification, Second Edition KS ISO 8274:2005 Kenya Standard—Windows and doors— Resistance to repeated opening and closing— Test method, Second Edition KS ISO 9379:2005 Kenya Standard—Operating forces—Test method—Doors, Second Edition KS ISO 9381:2005 Kenya Standard—Hinged or pivoted doors— Determination of the resistance to static torsion, Second Edition KS ISO 1954:2013 Kenya Standard—Plywood—Tolerances on dimensions, Second Edition KS ISO 2074:2007 Kenya Standard—Plywood—Vocabulary, Second Edition KS 2770-5:2022 Kenya Standard—Admixtures for sprayed concrete—Part 5: Definitions, requirements, conformity, marking and labelling, First Edition KS 2952-1:2022 Kenya Standard— Accessibility-ICT products and services—Part 1-Requirements, First Edition KS 2952-2:2022 Kenya Standard— Accessibility-ICT products and services—Part 2 —Conformance, First Edition KS EAS 132:2021 Kenya Standard—Hoe—Specification, First Edition Engineering KS ISO 22156:2021 KS ISO 13786:2017 KS ISO 19208:2016 Kenya Standard—Bamboo structures—Bamboo Culms Structural design, Second Edition Kenya Standard—Thermal performance of building components dynamic thermal characteristics calculation methods, Second Edition Kenya Standard—Framework for specifying performance in buildings, First Edition KS EAS 188:2021 KS EAS 1020:2021 KS EAS 1021:2021 KS EAS 1022:2021 Electrotechnical Kenya Standard—Machete—Specification, Second Edition Kenya Standard—Shovels and spades — Specification, First Edition Kenya Standard— Steelhead hammer — Specification, First Edition Kenya Standard—Hacksaw blades — Specification, First Edition KS ISO 26101-1:2021 Kenya Standard—Acoustics—Test methods for the qualification of the acoustic environment— 13th May, 2022 THE KENYA GAZETTE 2543 Part I: Qualification of free-field environments, First Edition KS ISO 1996-2:2017 Kenya Standard—Acoustics—Description, measurement and assessment of environmental noise—Part 2: Determination of sound pressure levels, First Edition KS ISO 17099:2014 Kenya Standard—Radiological protection— Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry, First Edition KS IEC 60601-2-17:2013 Kenya Standard—Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy after loading equipment, First Edition KS IEC 60601-2-45:2015 Kenya Standard—Medical electrical equipment—Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices, Second Edition KS IEC 60601-2-542018 Kenya Standard—Medical electrical equipment—Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy, First Edition KS IEC 60601-2-68:2014 Kenya Standard—Medical electrical equipment—Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment, First Edition KS ISO 463:2006 Kenya Standard—Geometrical Product Specifications (GPS) —Dimensional measuring equipment—Design and metrological characteristics of mechanical dial gauges, First Edition KS ISO 3611:2010 Kenya Standard—Geometrical Product Specifications (GPS)—Dimensional measuring equipment: Micrometers for external measurements—Design and metrological characteristics, First Edition KS ISO 13385-1:2019 Kenya Standard—Geometrical Product Specifications (GPS)—Dimensional measuring equipment—Part 1: Design and metrological characteristics of calipers, First Edition KS ISO 13385-2:2020 Kenya Standard—Geometrical Product Specifications (GPS)—Dimensional measuring equipment—Part 2: Design and metrological characteristics of calliper depth gauges, First Edition KS ISO 1122-1:1998 Kenya Standard—Vocabulary of gear terms— Part 1: Definitions related to geometry, First Edition KS ISO 21771:2007 Kenya Standard—Gears—Cylindrical involute gears and gear pairs—Concepts and geometry, First Edition KS ISO/IEC 11801-1:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 1: General requirements, First Edition KS ISO/IEC 11801-2:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 2: Office premises, First Edition KS ISO/IEC 11801-3: 2021 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 3: Industrial premises, First Edition KS ISO/IEC 11801-4:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 4: Single-tenant homes, First Edition KS ISO/IEC 11801-5:2017 Kenya Standard—Information Technology - Generic cabling for customer premises—Part 5: Data centres, First Edition KS ISO/IEC 11801-6:2017 Kenya Standard—Information Technology —Generic cabling for customer premises—Part 6: Distributed building services, First Edition KS ISO/IEC TR 11801-9901:2014 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission, First Edition KS ISO/IEC TR 11801-9902:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 99-2: End-to-end link configurations, First Edition KS ISO/IEC TS 11801-9903:2021 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9903: Matrix modelling of channels and links, First Edition KS ISO/IEC TR 11801-9904:2017 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9904: Assessment and mitigation of installed balanced cabling channels to support 2,5GBASE-T and 5GBASE-T, First Edition KS ISO/IEC TR 11801-9905:2018 Kenya Standard—Information Technology—Generic cabling systems for customer premises—Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application, First Edition KS ISO/IEC TR 11801-9906:2020. Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9906: Balanced 1-pair cabling channels up to. 600 MHz for single pair Ethernet (SPE) , First Edition KS ISO/IEC TR 11801-9907:2019 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9907: Specifications for direct attach cabling, First Edition KS ISO/IEC TR 11801-9908:2020 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9908: Guidance for the support of higher speed applications over optical fibre channels, First Edition KS ISO/IEC TR 11801-9909:2020 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9909: Evaluation of balanced cabling in support of 25 Gbit/s for reach greater than 30 metres, First Edition KS ISO/IEC TR 11801-9910:2020 Kenya Standard—Information Technology—Generic cabling for customer premises—Part 9910: Specifications for modular plug terminated link cabling, First Edition KS CISPR/TR 18-1:2017 Kenya Standard—Radio interference characteristics of overhead power lines and high-voltage equipment—Part 1: Description of phenomena, First Edition KS CISPR/TR 18-2:2017 Kenya Standard—Radio interference characteristics of overhead power lines and high-voltage equipment—Part 2: Methods of measurement and procedure for determining limits, First Edition KS CISPR/TR 18-3:2017 Kenya Standard—Radio interference characteristics of overhead power lines and high-voltage equipment—Part 3: Code of practice for minimizing the generation of radio noise, First Edition KS IEC 60670-21:2016 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 21: Particular requirements for boxes and enclosures with provision for suspension means, Second Edition KS IEC 60670-22: 2015 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22: Particular requirements for connecting boxes and enclosures, Second Edition KS IEC 60670-23:2016 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23: Particular requirements for floor boxes and enclosures, Second Edition KS IEC 61936-1:2021 Kenya Standard—Power installations exceeding 1 kV AC and 1,5 kV DC—Part 1: AC, Second edition KS IEC 60034-3:2020 Kenya Standard—Rotating electrical machines—Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators, Second Edition KS LEC 60309-1:2021Kenya Standard—Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 1: General requirements, First Edition KS IEC 60309-2:2021Kanya Standard—Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 2: Dimensional compatibility requirements for pin and contact-tube accessories, First Edition KS IEC 60309-4:2021 Kenya Standard—Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 4: Switched socket-outlets with or without interlock, First Edition KS IEC 60309-5:2017 Kenya Standard—Plugs, socket-outlets and couplers for industrial purposes—Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC), First Edition KS IEC 62444:2010 Kenya Standard—Cable glands for electrical installations, First Edition KS IEC 61921:2017 Kenya Standard—Power capacitors — Low- voltage power factor correction banks, First Edition KS IEC 61008-2-1:1990- Kenya Standard—Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's)—Part 2-I: Applicability of the general rules to RCCB's functionally independent of line voltage, First Edition KS IEC 61008-2-2:1990 Kenya Standard—Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's)—Part 2-2: Applicability of the general rules to RCCB's functionally dependent on line voltage, First Edition KS IEC 61008-1:2013 Kenya Standard—Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) Partl: General rules, First Edition KS IEC 60898-3:2019 Kenya Standard—Electrical accessories — Circuit-breakers for overcurrent protection for household and similar installations—Part 3: Circuit-breakers for DC operation, First Edition KS IEC 61009-1:2013 Kenya Standard—Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)—Part 1: General rules, First Edition KS IEC 61009-2-1:1991 Kenya Standard—Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's)—Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage, First Edition KS IEC 61009-2-2:1991 Kenya Standard—Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's)—Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage, First Edition KS IEC 63052:2019 Kenya Standard—Power frequency overvoltage protective devices (POPs) for household and similar applications, First Edition KS IEC 60826:2017 Kenya Standard—Design criteria of overhead transmission lines, Second Edition KS IEC 61969-1:2020 Kenya Standard—Mechanical structures for electrical and electronic equipment - Outdoor enclosures—Part 1: Design guidelines, Second Edition KS IEC 62053-21:2020 Kenya Standard—Electricity metering equipment (a.c.)—Particular requirements—Part 21: Static meters for AC active energy (classes 0,5, 1 and 2), Second Edition KS IEC 62053-22:2020 Kenya Standard—Electricity metering equipment—Particular requirements—Part 22: Static meters for AC active energy (classes 0,1S, 0,2S and 0,5S), Second Edition KS IEC 62053-23:2020 Kenya Standard—Electricity metering equipment (a.c .)— Particular requirements—Part 23: Static meters for reactive energy (classes 2 and 3). Second Edition KS IEC 62052-11:2020 Kenya Standard—Electricity metering equipment—General requirements, tests and test conditions—Part 11: Metering equipment, Second Edition KS IEC 60282-1:2020 Kenya Standard—High-voltage fuses—Part 1: Current-limiting fuses, Second Edition KS 2951:2022 Kenya Standard— Biogas systems—Code of practice for farm and industrial scale biogas systems, First Edition The following standards are confirmed forthwith;Food. KS 1772:2003 Kenya Standard—Specification for jelly powder and jelly crystals KS CAC/GL 78:2011 Kenya Standard—Guidelines for the control of campylobacter and salmonella in chicken meat KS ISO 1736:2008 Kenya Standard—Dried milk and dried milk products—Determination of fat content — Gravimetric method reference method KS 1302:1996 Kenya Standard—Specification for bread crumbs KS 1154:1996 Kenya Standard—Whole dried and ground ginger—Specification KS 1155:2008 Kenya Standard—Whole and ground nutmeg— Specification KS 1162:2008 Kenya Standard—Fenugreek seed powder— Specification KS 2050:2007 Kenya Standard—Soy sauce—Specification KS 228-3:1986 Kenya Standard—Specification for curry powder—Part 3: Determination of filth and extraneous matter in spices and condiments 13th May, 2022 THE KENYA GAZETTE 2545 KS ISO 927:2009/COR 1:2012 Kenya Standard—Spices and condiments—Determination of extraneous matter and foreign matter content—Technical Corrigendum 1 KS ISO 7542:1984 Kenya Standard—Ground (powdered) paprika (Capsicum annuum Linnaeus)—Microscopical examination KS ISO 676:1995/COR 1:1997 Kenya Standard—Spices and condiments—Botanical nomenclature— TECHNICAL CORRIGENDUM 1 KS ISO 6663:1998 Kenya Standard—Garlic cold storage KS ISO 5560:1997 Kenya Standard — Dehydrated garlic (Allium sativum L.) — Specification KS ISO 5561:1990 Kenya Standard—Black caraway and blond caraway (Carum carvi Linnaeus), whole Specification KS ISO 5565-1:1999 Kenya Standard—Vanilla [Vanilla fragrant (Salisbury) Ames] —Part 1: Specification KS ISO 2256:1984/AMD 1:2017 Kenya Standard—Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus)—Specification — AMENDMENT 1 KS RAS 107:2007 Kenya Standard—Coffee—Determination of caffeine content—Reference method KS ISO 6667:1985 Kenya Standard—Green coffee—Determination of proportion of insect damaged beans KS 2221:2011 Kenya Standard—Coffee packaging— Specification KS ISO 6666:2011 Kenya Standard—Coffee—Sampling triers for green coffee or raw coffee and parchment coffee KS EAS 5:2009 Kenya Standard—Refined white sugar— Specification KS 319-4:2008 Kenya Standard—Sugar confectionery — Specification—Part 4 Other sugar confectionery products KS EAS 17:2000 Kenya Standard—Methods of chemical analysis for sugar—Specification KS EAS 818:2014 Kenya Standard—Sugar cane jaggery — Specification KS ISO 2292:2017 Kenya Standard—Cocoa beans— Sampling KS 2722:2017 Kenya Standard—Rabbit meat—Specification KS 2723:2017 Kenya Standard—Dried meat—Specification KS CODEX STAN 96:1991 Kenya Standard—Standard for cooked cured ham KS ISO 10272-1:2017 Kenya Standard—Microbiology of the food chain horizontal method for detection and enumeration of campylobacter Spp —Part 1: Detection method KS ISO 10272-2:2017 Kenya Standard—Microbiology of the food chain horizontal method for detection and enumeration of campylobacter Spp—Part 2: Colony count technique KS ISO 11290-1:2017 Kenya Standard—Microbiology of the food chain horizontal method for the detection and enumeration of listeria monocytogenes and of listeria Spp—Part 1: Detection method KS ISO 11290-2:2017 Kenya Standard—Microbiology of the food chain horizontal method for the detection and enumeration of listeria monocytogenes and of listeria Spp —Part 2: Enumeration method KS ISO 21528-1:2017 Kenya Standard—Microbiology of the food chain horizontal method for the detection and enumeration of Enterobacteriaceae —Part 1: Detection of Enterobacteriaceae KS ISO 21528-2:2017 Kenya Standard—Microbiology of the food chain horizontal method for the detection and enumeration of enterobacteriaceae—Part 2: Colony count technique KS 791:1990 Kenya Standard—Methods of detection of salmonellae in meat and meat products KS 792:1991 Kenya Standard—Method of detection and enumeration of enterobacteriaceae in meat and meat product KS CODEX STAN 89:1981 Kenya Standard—Standard for luncheon meat KS 1172:1995 Kenya Standard—Specification for grading chicken eggs KS 166:2000 Kenya Standard—Methods for the chemical analysis of meat and meat products Agriculture KS ISO 15914:2004 Kenya Standard—Animal feeding stuffs enzymatic determination of total starch content KS 2289-1:2017 Kenya Standard—Compounded tilapia feeds — Specification —Part 1: Complete feed KS 2710:2017 Kenya Standard—Prosopis meal for compounding animal feeds—Specification KS 2711:2017 Kenya Standard—Dried insect products for compounding animal feeds—Specification KS CAC/GL 71:2009 Kenya Standard—Guidelines for the design and implementation of national regulatory food safety assurance programme associated with the use of veterinary drugs in food producing animals Chemical KS 1182:1994 Kenya Standard—Specification for butyl alcohol (butonal for industrial use) KS 2272:2011 Kenya Standard—Nitric acid—Specification KS 242:1980 Kenya Standard—Specification for sulphuric acid for use in lead-acid batteries KS 2692-1:2017 Kenya Standard—Alcohol denaturants— Specification KS 591:2011 Kenya Standard—Denatured spirits— Specification KS 666:2011 Kenya Standard—Specification for white spirit (mineral turpentine) KS EAS 213:2007 Kenya Standard—Liquid chemical products for industrial use—Determination of absolute density at 20 degree centigrade KS EAS 214:2007 Kenya Standard—Volatile organic liquids for industrial use—Determination of dry residue after evaporation on a water bath— General method KS ISO 1388-1:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 1: General KS ISO 1388-10:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 10: Estimation of hydrocarbons content—Distillation method KS ISO 1388-11:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 11: Test for detection of furfural KS ISO 1388-12:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 12: Determination of permanganate time KS ISO 1388-2:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 2: Detection of alkalinity or determination of acidity to phenolphthalein KS ISO 1388-3:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 3: Estimation of content of carbonyl compounds present in small amounts—Photometric method KS ISO 1388-4:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 4: Estimation of content of carbonyl compounds present in moderate amounts —Titrimetric method KS ISO 1388-5:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 5: Determination of aldehydes content—Visual colorimetric method KS ISO 1388-6:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 6: Test for miscibility with water KS ISO 1388-7:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (v/v))—Photometric method KS ISO 1388-8:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (v/v))—Visual colorimetric method KS ISO 1388-9:1981 Kenya Standard—Ethanol for industrial use— Methods of test—Part 9: Determination of esters content —Titrimetric method after saponification KS ISO 2482:1973 Kenya Standard—Sodium chloride for industrial use—Determination of calcium and magnesium contents—Edta complexometric methods KS ISO 2483:1973 Kenya Standard—Sodium chloride for industrial use—Determination of the loss of mass at 110 degrees C KS ISO 6353.3:1987 Kenya Standard—Reagents for chemical analysis—Part 3: Specifications—Second series KS ISO 758:1976 Kenya Standard—Liquid chemical products for industrial use—Determination of density at 20 degrees c KS ISO 759:1981 Kenya Standard—Volatile organic liquids for industrial use—Determination of dry residue after evaporation on water bath—General method KS ISO 918:1983 Kenya Standard—Volatile organic liquids for industrial use—Determination of distillation characteristics KS 353:1985 Kenya Standard—Specification for crown finish glass bottles KS 378:1982 Kenya Standard—Glossary of terms relating to glass industry KS 513:1985 Kenya Standard—Specification for glass tableware KS 514:1985 Kenya Standard—Method of sampling and test for glass bottles KS 649-1:1989 Kenya Standard—Specification for toughened automobile windscreens—Part 1: Specification for toughed windscreens KS 650:2001 Kenya Standard—Specification for glass globes for paraffin lighting appliances for domestic use KS ISO 13079:2011 Kenya Standard—Laboratory glass and plastics ware—Tubes for the measurement of the erythrocyte sedimentation rate by the westergren method KS ISO 13130:2011 Kenya Standard—Laboratory glassware— Desiccators KS ISO 1772:1975 Kenya Standard—Laboratory crucibles in porcelain and silica KS ISO 1773:1997 Kenya Standard—Laboratory glassware — Narrow-necked boiling flasks KS ISO 1775:1975 Kenya Standard—Porcelain laboratory apparatus—Requirements and methods of test KS ISO 3585:1998 Kenya Standard—Borosilicate glass 3.3 — Properties KS ISO 383:1976 Kenya Standard—Laboratory glassware— Interchangeable conical ground joints KS ISO 4785:1997 Kenya Standard—Laboratory glassware — Straight-bore glass stopcocks for general purposes KS ISO 4788:2005 Kenya Standard—Laboratory glassware— Graduated measuring cylinders KS ISO 4791-1:1985 Kenya Standard—Laboratory apparatus— Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica—Part 1: Names for items of apparatus KS ISO 4794:1982 Kenya Standard—Laboratory glassware— Methods for assessing the chemical resistance of enamels used for colour coding and colour marking KS ISO 4796-2:2000 Kenya Standard—Laboratory glassware — Bottles —Part 2: Conical neck bottles KS ISO 4796-3:2000 Kenya Standard—Laboratory glassware — Bottles —Part 3: Aspirator bottles KS ISO 4799:1978 Kenya Standard—Laboratory glassware— Condensers KS ISO 4800:1998 Kenya Standard—Laboratory glassware— Separating funnels and dropping funnels KS ISO 4802-1:1988 Kenya Standard—Glassware—Hydrolytic resistance of the interior surfaces of glass containers—Part 1: Determination by titration method and classification KS ISO 7056:1981 Kenya Standard—Plastics laboratory ware— Beakers KS ISO 7086-2:2000 Kenya Standard—Glass hollowware in contact with food—Release of lead and cadmium—Part 2: Permissible limits KS ISO 718:1990 Kenya Standard—laboratory glassware— thermal shock and thermal shock endurance— Test methods KS ISO 7713:1985 Kenya Standard—Laboratory glassware— Disposable serological pipettes KS ISO 10545-1:2014 Kenya Standard—Ceramic tiles—Part 1: Sampling and basis for acceptance KS ISO/TR 17870-1:2015 Kenya Standard—Ceramic tiles— Guidelines for installation—Part 1: Installation of ceramic wall and floor tiles KS ISO/TR 17870-2:2015 Kenya Standard—Ceramic tiles— Guidelines for installation—Part 2: Installation of thin ceramic wall and floor tiles and panels KS ISO 10545-11:1994 Kenya Standard—Ceramic tiles —Part 11: Determination of crazing resistance for glazed tiles KS ISO 10545-5:1996 Kenya Standard—Ceramic tiles—Part 5: Determination of impact resistance by measurement of coefficient of restitution KS ISO 10545-7:1996 Kenya Standard—Ceramic tiles—Part 7: Determination of resistance to surface abrasion for glazed tiles KS ISO 13132:2011 Kenya Standard—Laboratory glassware—Petri dishes KS ISO 10545-12:1995 Kenya Standard—Ceramic tiles—Part 12: Determination of frost resistance 13th May, 2022 THE KENYA GAZETTE 2547 KS ISO 6486-2:1999 Kenya Standard—Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food—Release of lead and cadmium—Part 2: Permissible limits KS ISO 8391-1:1986 Kenya Standard—Ceramic cookware in contact with food—Release of lead and cadmium—Part 1: Method of test KS ISO 8391-2:1986 Kenya Standard—Ceramic cookware in contact with food—Release of lead and cadmium—Part 2: Permissible limits KS 289:1980 Kenya Standard—Specification for unbacked flexible PVC floor covering KS ISO 14644-4:2001 Kenya Standard —Cleanrooms and associated controlled environments—Part 4: Design, construction and start-up KS ISO 14644-5:2004 Kenya Standard —Cleanrooms and associated controlled environments—Part 5: Operations KS ISO 14644-7:2004 Kenya Standard —Cleanrooms and associated controlled environments —Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) KS ISO 14698-1:2003 Kenya Standard —Cleanrooms and associated controlled environments —Biocontamination control—Part 1: General principles and methods KS ISO 14698-2:2003 Kenya Standard —Cleanrooms and associated controlled environments —Biocontatnination control—Part 2: Evaluation and interpretation of biocontamination data KS ISO 14698-2:2003/cor 1:2004 Kenya Standard —Cleanrooms and associated controlled environments — Biocontatnination control—Part 2: Evaluation and interpretation of biocontamination data— Technical CORRIGENDUM 1 KS IEC 60068-2-21:2006 Kenya Standard—Environmental testing— Part 2-21: Tests - Test u: Robustness of terminations and integral mounting devices KS ISO 14644-15:2017 Kenya Standard— cleanrooms and associated controlled environments—Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration KS ISO 14644-13:2017 Kenya Standard —Cleanrooms and associated controlled environments—Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications KS ISO 14596:2007 Kenya Standard—Petroleum products— Determination of sulfur content—Wavelength- dispersive x-ray fluorescence spectrometry KS ISO 15167:1999 Kenya Standard—Petroleum products— Determination of particulate content of middle distillate fuels—Laboratory filtration method KS ISO 15169:2003 Kenya Standard—Petroleum and liquid petroleum products—Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems KS ISO 1998-7:1998 Kenya Standard—Petroleum industry — Terminology—Part 7: Miscellaneous terms KS ISO 1998-99:2000 Kenya Standard—Petroleum industry — Terminology —Part 99: General and index KS ISO 2049:1996 Kenya Standard—Petroleum products— Determination of colour (astm scale) KS ISO 20764:2003 Kenya Standard—Petroleum and related products—Preparation of a test portion of high- boiling liquids for the determination of water content—Nitrogen purge method KS ISO 20847:2004 Kenya Standard—Petroleum products— Determination of sulfur content of automotive fuels —Energy-dispersive x-ray fluorescence spectrometry KS ISO 2719:2016 Kenya Standard—Determination of flash point— Pensky-martens closed cup method KS ISO 2909:2002 Kenya Standard—Petroleum products— Calculation of viscosity index from kinematic viscosity KS ISO 3007:1999 Kenya Standard—Petroleum products and crude petroleum—Determination of vapour pressure—Reid method KS ISO 3012:1999 Kenya Standard—Petroleum products— Determination of thiol (mercaptan) sulfur in light and middle distillate fuels—Potentiometric method KS ISO 3733:1999 Kenya Standard—Petroleum products and bituminous materials—Determination of water—Distillation method KS ISO 3735:1999 Kenya Standard—Crude petroleum and fuel oils — Determination of sediment—extraction method KS ISO 3771:2011 Kenya Standard—Petroleum products— Determination of base number — Perchloric acid potentiometric titration method KS ISO 3830:1993 Kenya Standard—Petroleum products— Determination of lead content of gasoline— Iodine monochloride method KS ISO 3837:1993 Kenya Standard—Liquid petroleum products — Detertnination of hydrocarbon types— Fluorescent indicator adsorption method KS ISO 4269:2001 Kenya Standard—Petroleum and liquid petroleum products—Tank calibration by liquid measurement—Incremental method using volumetric meters KS ISO 4512:2000 Kenya Standard—Petroleum and liquid petroleum products—Equipment for measurement of liquid levels in storage tanks— Manual methods KS ISO 6245:2001 Kenya Standard—Petroleum products— Determination of ash KS ISO 6247:1998 Kenya Standard—Petroleum products— Determination of foaming characteristics of lubricating oils KS ISO 6293-1:1996 Kenya Standard—Petroleum products— Determination of saponification number—Part 1: Colour-indicator titration method KS ISO 6293-2:1998 Kenya Standard—petroleum products— Determination of saponification number—Part 2: Potentiometric titration method KS ISO 6296:2000 Kenya Standard—Petroleum products— Determination of water—Potentiometric Karl Fischer titration method KS ISO 6614:1994 Kenya Standard—Petroleum products— Determination of water separability of petroleum oils and synthetic fluids KS ISO 6615:1993 Kenya Standard—Petroleum products— Determination of carbon residue— Conradson method KS ISO 6619:1988 Kenya Standard—Petroleum products and lubricants—Neutralization number— Potentiometric titration method KS ISO 7507-1:2003 Kenya Standard—Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 1: Strapping method KS ISO 7507-2:2005 Kenya Standard—Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 2: Optical-reference-line method KS ISO 7507-3:2006 Kenya Standard—Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 3: Optical-triangulation method KS ISO 7507-4:2010 Kenya Standard—Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks—Part 4: Internal electro- optical distance-ranging method KS ISO 7507-5:2000 Kenya Standard—Petroleum and liquid petroleum products—Calibration of vertical cylindrical tanks—Part 5: External electro- optical distance-ranging method KS ISO 7536:1994 Kenya Standard—Petroleum products— Determination of oxidation stability of gasoline—Induction period method KS ISO 7537:1997 Kenya Standard—Petroleum products— Determination of acid number—Semi-micro colour-indicator titration method KS ISO 8754:2003 Kenya Standard—Petroleum products— Determination of sulfur content—Energy- dispersive x-ray fluorescence spectrometry KS ISO 9200:1993 Kenya Standard—Crude petroleum and liquid petroleum products—Volumetric metering of viscous hydrocarbons KS ISO 10370:2014 Kenya Standard—Petroleum products— Determination of carbon residue—Micro method KS ISO 10478:1994 Kenya Standard—Petroleum products— Determination of aluminium and silicon in fuel oils—Inductively coupled plasma emission and atomic absorption spectroscopy methods KS ISO 11223:2004 Kenya Standard—Petroleum and liquid petroleum products—Direct static measurements—Measurement of content of vertical storage tanks by hydrostatic tank gauging KS ISO 11563:2003 Kenya Standard—Crude petroleum and petroleum products—Bulk cargo transfer— guidelines for achieving the fullness of pipelines KS ISO 1998-6:2000 Kenya Standard—petroleum industry — terminology—Part 6: Measurement—Current version KS 2490:2013 Kenya Standard—Automatic transmission fluid— Specification KS ISO 8216-3:1987 Kenya Standard—Petroleum products—fuels (class f)—Classification—Part 3: Family I (liquefied petroleum gases) KS ISO 1309-2:1996 Kenya Standard—Specification for diesel fuels—Part 2: Industrial diesel oil KS ISO 12185:1996 Kenya Standard—Crude petroleum and petroleum products—Determination of density—Oscillating u-tube method KS ISO 12205:1995 Kenya Standard—Petroleum products— Determination of the oxidation stability of middle-distillate fuels KS ISO 12917-2:2002 Kenya Standard—Petroleum and liquid petroleum products—Calibration of horizontal cylindrical tanks—Part 2: Internal electro- optical distance-ranging method KS ISO 12937:2000 Kenya Standard—Petroleum products— Determination of water—Coulometric Karl Fischer titration method KS 1968:2006 Kenya Standard—The petroleum industry— Electrical installations in the distribution and marketing sector—Code of practice KS 2501:2013 Kenya Standard—Detergent disinfectant liquid toilet cleansers—Specification KS 809-3:2013 Kenya Standard—Specification for toilet cleaners—Part 3: Alkaline and neutral liquid toilet cleaners KS 929:2016 Kenya Standard—Chemical disinfectants and antiseptics—Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas— Test method and requirements (Phase 2, step 1) KS 809-1:1988 Kenya Standard—Specification for toilet cleansers—Part 1: Powder toilet bowl cleanser KS 45:1977 Kenya Standard—Methods of analysis for soaps KS 1796:2003 Kenya Standard—Specification for domestic chlorine based sterilizing fluids KS 2502:2013 Kenya Standard—Liquid oxygen based bleach for domestic use specification KS 1455-1:1999 Kenya Standard—Specification for glass cleaner—Part 1: Liquid glass cleaner KS 1795:2003 Kenya Standard—Neem herbal soap— Specification KS 1921:2005 Kenya Standard—Gel soap—Specification KS 2115:2007 Kenya Standard—Soap powder or chips— Specification KS 386:1982 Kenya Standard—Specification for carbolic toilet soap KS 803-1:1988 Kenya Standard—Specification for liquid soaps—Part 1: Toilet soap KS 44-2:2005 Kenya Standard—Toilet soaps — Specification—Part 2: Baby soaps KS 803-2:1988 Kenya Standard—Specification for liquid soaps—Part 2: Liquid floor soap KS 803-3:1988 Kenya Standard—Specification for liquid soaps—Part 3: Lotion soap KS 805:1988 Kenya Standard—Specification for a waterless hand cleaner KS 2162:2009 Kenya Standard—Products used for treatment of water intended for human consumption— Inorganic supporting and filtering materials— Definitions KS 2163:2009 Kenya Standard—Products used for treatment of water intended for human consumption— Inorganic supporting and filtering materials— Methods of test KS 2587:2015 Kenya Standard—Chemicals used for treatment of water intended for human consumption— Chemicals for emergency use sodium dichloroisocyanurate dihydrate KS 2588:2015 Kenya Standard—Chemicals used for treatment of water intended for human consumption— Chemicals for emergency use sodium dichloroisocyanurate anhydrous KS 2258:2010 Kenya Standard—Specification for water for lead acid batteries KS 2637:2016 Kenya Standard—Chlorine tablets— Specification KS 2639:2016 Kenya Standard—Copper sulphate— Specification KS 1918:2005 Kenya Standard—Chemicals used for treatment of water intended for human consumption anionic and non-ionic polyacrylamides— Specification 13th May, 2022 THE KENYA GAZETTE 2549 KS 1919:2005 Kenya Standard—Chemicals used for treatment of water intended for human consumption poly diallyldimethylammonium chloride polydadmac —Specification KS 1920:2005 Kenya Standard—Chemicals used for treatment of water intended for human consumption cationic polyacrylamides —Specification KS 1940:2005 Kenya Standard—Chemicals used for treatment of water intended for human consumption polyamines — Specification KS 88:1979 Kenya Standard—Specification for distilled water Cosmetics KS ISO 1041:1973 Kenya Standard—Essential oils—Determination of freezing point KS ISO/TR 11018:1997 Kenya Standard—Essential oils—General guidance on the determination of flashpoint KS ISO 1241:1996 Kenya Standard—Essential oils—Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols KS ISO 1242:1999 Kenya Standard—Essential oils—Determination of acid value Kenya. Standard—Essential oils—Determination of carbonyl value—Free hydroxylamine method Kenya Standard—Essential oils—Determination of carbonyl value —Potentiometric methods using hydroxylammonium chloride Kenya Standard—Essential oils—Determination of relative density at 20 °C—Reference method Kenya Standard—Essential oils—Determination of refractive index Kenya Standard—Cosmetics—Microbiology — Guidelines for the risk assessment and identification of tnictobiologically low-risk products KS ISO 3141:1997 Kenya Standard—Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison] KS ISO 3142:1997 Kenya Standard—Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison] KS ISO 3143:1997 Kenya Standard—Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison] KS ISO 3516:1997 Kenya Standard—Oil of coriander fruits (Coriandrum sativum L.) KS ISO 3520:1998 Kenya Standard—Oil of bergamot [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], Italian type Kenya Standard—Oil of cubeb. This standard was last reviewed and confirmed in 2017 Kenya Standard—Essential oils (containing tertiary alcohols)—Estimation of free alcohols content by determination of ester value after acetylation Kenya Standard—Essential oils — Quantitative evaluation of residue on evaporation Kenya Standard—Essential oils—Determination of optical rotation Kenya Standard—Essential oils — Analysis by gas chromatography on packed columns— General method KS ISO 7609:1985 Kenya Standard—Essential oils—Analysis by gas chromatography on capillary columns— General method KS ISO 7660:1983 Kenya Standard—Essential oils—Determination of ester value of oils containing difficult-to- saponify esters KS ISO 8432:1987 Kenya Standard — Essential oils— Analysis by high performance liquid chromatography— General method KS ISO 875:1999 Kenya Standard—Essential oils—Evaluation of miscibility in ethanol KS ISO 22716:2007 Kenya Standard — Cosmetics — Good Manufacturing Practices (GMP)—Guidelines on Good Manufacturing Practices KS ISO 17516:2014 Kenya Standard—Cosmetics —Microbiology — Microbiological limits KS ISO 16128-1:2016 Kenya Standard—Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products—Part 1: Definitions for ingredients Services KS ISO 9355-1:1999 Kenya Standard—Ergonomics—Requirements for the design of displays and control actuators—Part 1: Human interactions with displays and control actuators KS ISO 9886:2004 Kenya Standard—Ergonomics—Evaluation of thermal strain by physiological measurements KS ISO 9920:2007 Kenya Standard—Ergonomics of the thermal environment estimation of thermal insulation and water vapour resistance of a clothing ensemble KS ISO 9921:2003 Kenya Standard—Ergonomics—Assessment of speech communication KS ISO/TR 22411:2008 Kenya Standard—Ergonomics—Data and guidelines for the application of KS ISO/IEC GUIDE 71 to products and services to address the needs of older persons and persons with disability KS ISO 24504: 2014 Kenya Standard—Ergonomics—Accessible design sound pressure levels of spoken announcements for products and public address systems KS ISO/TR 12295:2014 Kenya Standard—Ergonomics—Application document for international standards on manual handling (ISO 11228- 1, ISO 11228 -2 and ISO 11228 -3) and evaluation of static working postures (ISO 11226) KS ISO/TS 20646:2014 Kenya Standard—Ergonomics—Guidelines for the optimization of musculoskeletal workload KS 2048-2:2010 Kenya Standard—Occupational noise management — Specification — Part 2 Measurement and assessment of noise emission and exposure KS ISO 9921:2003 Kenya Standard—Ergonomics—Assessment of speech communication KS ISO 9886:2004 Kenya Standard—Ergonomics—Evaluation of thermal strain by physiological measurements KS ISO/TR 22411:2008 Kenya Standard—Ergonomics—Data and guidelines for the application of KS ISO/IEC GUIDE 71 to products and services to address the needs of older persons and persons with disabilities KS ISO 9920:2007 Kenya Standard—Ergonomics of the thermal environment—Estimation of thermal insulation KS ISO 1271:1983 KS ISO 1279:1996 KS ISO 279:1998 KS ISO 280:1998 KS ISO 29621:2017 KS ISO 3756:1976 KS ISO 3794:1999 KS ISO 4715:1978 KS ISO 592:1998 KS ISO 7359:1985 and water vapour—Resistance of a clothing ensemble KS ISO 11399:1995 Kenya Standard—Ergonomics of the thermal environment principles and application of relevant international standards KS ISO 13857:2008 Kenya Standard—Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs KS ISO 12100:2010 Kenya Standard—Safety of machinery— General principles for design risk assessment and risk reduction KS ISO 14123-1:2015 Kenya Standard—Safety of machinery— Reduction of risks to health resulting from hazardous substances emitted by machinery— Part 1: Principles and specifications for machinery manufacturers KS ISO 14123-2:2015 Kenya Standard—Safety of machinery— Reduction of risks to health resulting from hazardous substances emitted by machinery— Part 2: Methodology leading to verification procedures KS ISO 13577-2:2014 Kenya Standard—Industrial furnaces and associated processing equipment —Safety—Part 2: Combustion and fuel handling systems KS ISO 14122-1:2016 Kenya Standard—Safety of machinery— Permanent means of access to machinery—Part 1: Choice of fixed means and general requirements of access KS ISO 14122-2:2016 Kenya Standard—Safety of machinery— Permanent means of access to machinery—Part 2: Working platforms and walkways KS ISO 14122-3:2016 Kenya Standard—Safety of machinery— Permanent means of access to machinery—Part 3: Stairs, stepladders and guard rails KS ISO 14122-4:2016 Kenya Standard—Safety of machinery— Permanent means of access to machinery—Part 4: Fixed ladders KS 2713:2017 Kenya Standard—Hazardous installations— Safety and health code of practice KS ISO 17776:2016 Kenya Standard—Petroleum and natural gas industries offshore production installations— Major accident hazard management during the design of new installations KS ISO 13577-1:2016 Kenya Standard—Industrial furnaces and associated processing equipment safety—Part 1 General requirements KS ISO 24504:2014 Kenya Standard—Ergonomics — Accessible design sound pressure levels of spoken announcements for products and public address systems KS ISO/TR 12295:2014 Kenya Standard—Ergonomics—Application document for International standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226) KS ISO/TR 20646:2014 Kenya Standard—Ergonomics—Guidelines for the optimization of musculoskeletal workload KS ISO 11064-4:2004 Kenya Standard —Ergonomic —Design of control centres—Part 4: Layout and dimensions of workstations KS ISO 11226:2000 Kenya Standard—Ergonomics—Evaluation of static working postures KS ISO 11228-2:2007 Kenya Standard—Ergonomics—Manual handling—Part 2: Pushing and pulling KS ISO 11228-3:2007 Kenya Standard—Ergonomics—Manual handling—Part 3: handling of low loads at high frequency KS ISO 11429:1996 Kenya Standard—Ergonomics—Systems of auditory and visual danger and information signals KS ISO 12894:2001 Kenya Standard—Ergonomics of the thermal environment medical supervision of individuals exposed to extreme hot or cold environments KS ISO 13406-1:1999 Kenya Standard—Ergonomics—Requirements for work with visual displays based on flat panels—Part 1: Introduction KS ISO 13406-2:2001 Kenya Standard—Ergonomics—Requirements for work with visual displays based on flat panels—Part 2: Ergonomic requirements for flat panel displays KS ISO 24500:2010 Kenya Standard — Ergonomics — Accessible design auditory signals for consumer products KS ISO 24501:2010 Kenya Standard — Ergonomics — Accessible design sound pressure levels of auditory signals for consumer products KS ISO/TR 9241-100 Kenya Standard—Ergonomics of human system interaction—Part 100: Introduction of standards related to software ergonomics KS ISO 6385:2016 Kenya Standard—Ergonomics principles in the design of work systems KS ISO 9241-112:2017 Kenya Standard—Ergonomics of human system interaction—Part 112: Principles for the presentation of information Leather and Textile KS EAS 221:2001 Kenya Standard—Woven bags 100 % sisal for clean coffee beans—Specification KS 1234:1992 Kenya Standard—Specification for bedspreads KS 1057-2:1990 Kenya Standard—Method of test for complete filled transport packages bags KS 1028:1991 Kenya Standard—Methods of test for webbings and braids KS 1435:1999 Kenya Standard—Specification for coated fabrics for shoes KS 1784:2003 Kenya Standard—Test method for determination of non lint content of cotton KS 697-1:1990 Kenya Standard—Code of practice for grading of textile materials—Part I: Fabrics KS 2667:2017 Kenya Standard—Woven table cloth and napery—Specification KS 2668:2017 Kenya Standard—Duvet quilts and accessory products — Specification KS 269:1983 Kenya Standard—Method for determination of crease recovery of fabrics KS 1785:2003 Kenya Standard—Test Method for determination of shrinkage for textile fibres KS 367:2003 Kenya Standard—Specification for cotton canvas KS 1075-2:1991 Kenya Standard—Glossary of terms relating to fishing nets—Part 2: Basic terms and definitions KS 1465:2005 Kenya Standard—Childrens anoraks— Specification KS 265:1980 Kenya Standard—Method of determination of scouring loss in grey and finished cotton textile materials KS 1077-6:1995 Kenya Standard—Methods of test for coated fabrics—Part 5: Determination of surface drag 13th May, 2022 THE KENYA GAZETTE 2551 KS 1077-18:1998 Kenya Standard—Methods of test for coated fabrics—Part 18: Low temperature impact test adoption KS 1077-19:1998 Kenya Standard—Methods of test for coated fabrics—Part 19: Determination of low temperature bend test adoption KS 1077-20:1998 Kenya Standard—Methods of test for coated fabrics—Part 20: Determination of crush resistance KS 1077-3:1991 Kenya Standard—Methods of test for coated fabrics—Part 3: Determination of bursting strength KS 1077-5:1994 Kenya Standard—Methods of test for coated fabrics—Part 5: Conditioning of resistance to damage by flexing KS 1077-9:1991 Kenya Standard—Methods of test for coated fabrics—Part 9: Determination of colour fastness to wet and dry rubbing KS 1077-2:1991 Kenya Standard—Methods of test for coated fabrics—Part 2: Conditioning of test specimens KS 1243:1994 Kenya Standard—Specification for three strand hawser laid and four strand shroud laid polyethylene ropes KS 116:1993 Kenya Standard—Specification for cotton drills KS 506:1994 Kenya Standard—Specification for cotton dish cloths KS 1077-14:1996 Kenya Standard—Method of test for coated fabrics—Part 14: Determination of resistance to penetration by water KS 1151:1992 Kenya Standard—Specification for transfer cones KS 1140:1993 Kenya Standard—Method for detection and assessment of photochromism 30 .KS 1305-1:2005 Kenya Standard—Mosquito netting — Specification—Part 1: Round mesh cotton netting KS 1305-2:2005 Kenya Standard—Mosquito netting — Specification—Part 2: Synthetic fibre netting KS ISO 4921:2000 Kenya Standard—Knitting basic concepts— Vocabulary KS ISO 15625:2014 Kenya Standard—Silk electronic test method for defects and even KS ISO 16663-1:2009 Kenya Standard—Fishing nets method of test for the determination ness of raw silk KS ISO 8388:1998 Kenya Standard—Knitted fabrics types vocabulary of mesh size—Part 1: Opening of mesh KS ISO 11611:2015 Kenya Standard—Protective clothing for use in welding KS ISO 14116:2015 Kenya Standard—Protective clothing— Protection against flame limited flame spread materials material assemblies and clothing KS ISO 22198:2006 Kenya Standard — Textiles — Fabrics — Determination of width and length and allied processes KS ISO 2286-1:2016 Kenya Standard—Rubber or plastics coated fabrics—Determination of roll characteristics— Part 1: Methods for determination of length width and net mass KS ISO 675:2014 Kenya Standard—Textiles—Woven fabrics— Determination of dimensional change on commercial laundering near the boiling point KS ISO 7211-1:1984 Kenya Standard—Textiles—Woven fabrics— Construction methods of analysis—Part 1: Methods for presentation of weave diagram and plans for drafting denting and lifting KS ISO 7211-2:1984 Kenya Standard—Textiles—Woven fabrics construction methods of analysis—Part 2: Determination of number of threads per unit length KS ISO 7211-4:1984 Kenya Standard—Textiles—Woven fabrics construction methods of analysis—Part 4: Determination of twist in yarn removed from fabric KS ISO 7771:1985 Kenya Standard—Textiles—Determination of dimensional changes of fabrics induced by cold water immersion KS ISO 16322-1:2005 Kenya Standard—Textiles—Determination of spirality after laundering—Part 1 Percentage of wale spirality change in knitted garments KS ISO 16663-2:2003 Kenya Standard—Fishing Nets—Method of test for the determination of mesh size—Part 2: Length of mesh KS ISO 3005:1978 Kenya Standard—Textiles—Determination of dimensional change of fabrics induced by free steam KS ISO 9237:1995 Kenya Standard—Textiles—Determination of permeability of fabrics to air KS ISO 5084:1996 Kenya Standard—Textiles—Determination of thickness of textiles and textile products KS ISO 7965-2:199 3 Kenya Standard—Sacks drop test—Part 2 Sacks made from thermoplastic flexible film KS 210:1982 Kenya Standard—Glossary of textile terms relating to fabrics made from natural fibres KS 1125-1:1992 Kenya Standard—Specification for carpet backing fabrics—Part 1: Jute fabrics KS 1127:1992 Kenya Standard—Specification for curtain tapes KS 208:1981 Kenya Standard—Glossary of textile terms for natural fibres KS 696:1986 Kenya Standard—Generic names and definitions of natural fibres KS EAS 246:2001 Kenya Standard—Method for determination of added oil content of sisal or jute yarn or fabric KS 1786:2003 Kenya Standard—Test method for determination of neps vegetable matter and coloured fibre in wool top KS 1148-2:199 Kenya Standard—Specification for fabrics for water resistant clothing—Part 2: PVC coated fabrics KS 748-1:1988 Kenya Standard—Specification for coffee drying cloth—Part 1: Sisal cloth KS 944-1:2011 Kenya Standard—Specification for woven bags 100% sisal for green tea leaves—Part 1: Three dimensional type KS 944-2:2011 Kenya Standard—Specification for woven bags 100% sisal for green tea leaves—Part 2: Two dimensional type KS 133:2013 Kenya Standard—Specification for woven bags natural fibres for milled products KS 642:2009 Kenya Standard—Sisal packing twines— Specification KS 2257:2011 Kenya Standard—Specification for woven polylefin sacks bags for animal feeds KS 2286:2011 Kenya Standard—Specification for polyolefin sacks bags for maize meal KS 641:1986 Kenya Standard—Glossary of terms for ropes and cordages KS 1243:1994 Kenya Standard—Specification for three strand hawser laid and four strand shroud laid polyethylene ropes KS 1142:1992 Kenya Standard—Specification for polyolefin agricultural twines KS 1143:1993 Kenya Standard—Specification for three strand polyester multifilament ropes KS 1144:1993 Kenya Standard—Specification for three strand polyamide multifilament ropes Kenya Standard—Specification for three strand hawser laid and fight strand plaited polypropylene monofilament or film ropes KS ISO 18264:2016 Kenya Standard—Textile slings—Lifting slings for general purpose lifting operations made from fibre ropes high modulus polyethylene hmpe KS ISO 10547:2009 Kenya Standard—Polyester fibre ropes— Double braid construction KS ISO 10554:2009 Kenya Standard—Polyamide fibre ropes— Double braid construction KS ISO 10556:2009 Kenya Standard—Fibre ropes of polyester — Polyolefin dual fibres KS ISO 13431:1999 Kenya Standard —Geotextiles and geotextile related products—Determination of tensile creep and creep rupture behaviour KS ISO 9862:2005 Kenya Standard—Geosynthetics — Sampling and preparation of test specimens KS ISO 9864:2005 Kenya Standard —Geosynthetics —Test method for the determination of mass per unit area of geotextiles and geotextile related products KS ISO 13427:2014 Kenya Standard —Geosynthetics —Abrasion damage simulation sliding block test KS 1394-1:2000 Kenya Standard—Determination of burning behaviour for textile products—Part 1: Determination of ease of ignition vertically Oriented Specimens KS 2333:2011 Kenya Standard—Hand woven table mats— Specification KS 2334:2011 Kenya Standard—Hand woven scarves— Specification KS 2336:2011 Kenya Standard—Hand woven kikoi— Specification KS 778-2:1987 Kenya Standard—Glossary of terms on spinning and spinning preparation—Part 2: Open-end spinning KS ISO 10306:2014 Kenya Standard—Textiles—Cotton fibres— Evaluation of maturity by the air flow method KS ISO 18068:2014 Kenya Standard—Cotton fibres—Test method for sugar content—Spectrophotometry KS ISO 3074:2014 Kenya Standard—Wool—Determination of dichloromethane-soluble matter in combed sliver KS 639-1:1989 Kenya Standard—Specification for bandages— Part I: Cotton gauze bandages KS 630-1:1987 Kenya Standard—Methods for determination of tenacity of textile fibres and yarns—Part 1: Fibres KS 117-1:2016 Kenya Standard—Woven blankets— Specification KS 117-6:1990 Kenya Standard—Specification for blankets— Part 6: Non-woven blankets KS 2715:2017 Kenya Standard—Knitted pile blankets— Specification KS 1114-2:1993 Kenya Standard—Specification for textured filament yarns—Part 2: Polyamide yarns. KS ISO 105-Z01:1993 Kenya Standard—Textiles—Tests for colour fastness—Part Z01: Colour Fastness to Metals in The Dye Bath Cromium Salts KS ISO 105-Z02:1993 Kenya Standard—Textiles—Tests for colour fastness—Part Z02: Colour fastness to metals in the dye bath iron and copper KS ISO 105-Z04:1995 Kenya Standard—Textiles—Tests for colour fastness—Part Z04: Dispersibility of disperse dyes KS ISO 105-Z03:1996 Kenya Standard—Textiles—Tests for colour fastness—Part Z03: Intercompatibility of basic dyes for acrylic fibres KS ISO 105-Z05:1996 Kenya Standard—Textiles—Tests for colour fastness—Part Z05: Determination of the dusting behaviour of dyes KS ISO 105402:1997 Kenya Standard—Textiles—Tests for colour fastness—Part J02: Instrumental assessment of relative whiteness KS ISO 105-Z06:1998 Kenya Standard —Textiles —Tests for colour fastness—Part Z06: Evaluation of dye and pigment migration KS ISO 16373-3:2014 Kenya Standard—Textiles—Dyestuffs—Part 3: Method for determination of certain carcinogenic dyestuffs—Method using triethylamine methanol KS ISO 105401:1997 Kenya Standard —Textiles —Tests for colour fastness—Part J01: General Principles for Measurement of Surface Colour KS ISO 16373-2:2014 Kenya Standard—Textiles—Dyestuffs—Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs—Method using pyridine water KS ISO 18103:2015 Kenya Standard—Superfine woven wool fabric—Labelling requirements for super s code definition KS ISO 18254-1:2016 Kenya Standard —Textiles —Method for the detection and determination of alkylphenol ethoxylates apeo—Part 1: Method using hplc ms KS ISO 10617:2010 Kenya Standard—Textiles—Standard data format for colorimetric communication textiles and related measurements KS ISO 14362-1:2017 Kenya Standard—Textiles—Methods for determination of certain aromatic amines derived from azo colorants—Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres KS ISO 16373-1:2015 Kenya Standard—Textiles—Dyestuffs—Part 1: General principles of testing coloured textiles for dyestuff identification KS ISO 1833-11:2017 Kenya Standard—Textiles—Quantitative chemical analysis—Part 11: Mixtures of certain cellulose with certain other fibres method using sulfuric acid KS ISO 1833-4:2017 Kenya Standard —Textiles — Quantitative chemical analysis—Part 4: Mixtures of certain protein fibres with certain other fibres method using hypochlorite KS ISO 1833-7:2017 Kenya Standard —Textiles —Quantitative chemical analysis—Part 7: Mixtures of polyamide with certain other fibres method using formic acid KS ISO 11948-1:1996 Kenya Standard—Urine-absorbing aids—Part 1: Whole-product testing KS 1145:1992 KS ISO 17299-1:2014 Kenya Standard—Textiles—Determination of deodorant property—Part 1: General principle KS ISO 17299-2:2014 Kenya Standard—Textiles—Determination of deodorant property—Part 2: Detector tube method KS ISO 17299-5:2014 Kenya Standard—Textiles—Determination of deodorant property—Part 5: Metal oxide semiconductor sensor method KS ISO 17299-4:2015 Kenya Standard—Textiles—Determination of deodorant property—Part 4: Condensation sampling analysis KS ISO 11378-1:2000 Kenya Standard—Textile floor coverings— Laboratory soiling tests—Part 1: Kappasoil test KS ISO 11377:1997 Kenya Standard—Textile floor coverings— Floor soiling test site set up and soiling evaluation Kenya Standard—Methods of test for textile floor coverings—Part 3: Determination of delamination strength of secondary backing Kenya Standard—Methods for test for textile floor coverings—Part 2: Determination of constructional details Kenya Standard—Methods of test for textile floor coverings—Part 10: Determination of Types of Knots of hand made carpets Kenya Standard—Methods of test for textile floor coverings—Part 11: Determination of tuft length above woven ground of hand knotted carpets Kenya Standard — Carpet underlays — Specification Specification Kenya Standard—Furniture—Assessment of the ignitability of upholstered furniture—Past 2: Ignition source match flame equivalent Kenya Standard—Furniture—Assessment-of the ignitability of upholstered furniture—Part 1: Ignition source smouldering cigarette Kenya Standard—Rectangular textile floor coverings —Determinationof dimensions Kenya Standard—Specification for sliver cans Kenya Standard--Clesed :circuit _dry machines defusing and cheating of- characteristics characteristics KS 835-3:1988 KS 835-2:1989 KS 835-10:1997 KS 835-11:1997 KS 1843:2005 KS ISO 8191-2:1988 KS ISO 8191-1:1987 KS ISO 3018:1974 KS 08-894:1991 KS ISO 8232:1988 KS 08-1031:1990 KS 08-1032:1991 KS 08-1118:1991 KS 1119-1:1991 KS 1119-2:1991 KS 1058:1993 KS 08-988:1995 KS 1152-2:1993 Engineering KS EAS 148-1:2017 K-enyaStandard—Ceatent —Test methods—Part 1: Determination of strength Kenya Standard—Specification fer flyer bobbins Kenya Standard cation for cylindrical tubes for open endiminning Kenya Standard-1p" for tap mut bottom aprons in the-textile indumry Kenya Standard—Specification for ring travellers—Part I: Metallic travellers Kenya Standard—Specification for ring travellers—Part 2: Plastic travellers Kenya Standard—Graphic symbols for textile machinery Kenya Standard—Specification for sliver and yarn dyeing beams Kenya Standard--Specification for pings—Part 2: For automatic looms 13th May, 2022 THE KENYA GAZETTE 2553 Kenya Standard— Cement — Test methods—Part 2: Chemical analysis Kenya Standard — Cement — Test methods—Part 3: Determination of setting times and soundness Kenya Standard — Cement — Test methods—Part 4: Quantitative determination of constituents Kenya Standard—Cement—Test methods—Part 5: Pozzolanicity test for pozzolanic cements Kenya Standard —Cement— Test methods —Part 6: Determination of fineness Kenya Standard — Cement — Test methods—Part 7: Methods of taking and preparing samples Kenya Standard —Cement — Test methods —Part 8: Heat of hydration solution method Kenya Standard —Cement — Part 1: Composition, specification and conformity criteria for common cements Kenya Standard—Cement—Part 2: Conformity evaluation Kenya Standard—Glossary of terms relating to water sewage and industrial effluents—Part 1 Terms widely used in relation to water sewage and industrial effluents Kenya Standard—Glossary of terms relating to water sewage and industrial effluents—Part 2 Terms widely used in relation to water supply and sewerage Kenya Standard—Reuse of treated wastewater—Specification—Part 1: Irrigation -Kenya Standard—Analysis of wastewater for use in agriculture—Part 1: The modified bailenger method Kenya Standard—Analysis of water for use in agriculture—Part 2: MPN methods Kenya Standard—Analysis of wastewater for use in agriculture—Part 3: Membrane filtration method 2569-1:2014 Kenya Standard—Hydraulic road binders—Part 1: Rapid hardening hydraulic road binders composition—Specification and conformity criteria Kenya Standard—Integral cement waterproofing compounds—Specification Kenya Standard—Architectural and building drawings— Vocabulary Kenya Standard—Specification for stabilised soil taroks Kenya SMadard—Symbols for plumbing, water supply, heating, ventilation and ducting Kenya Standard—Glossary of terms for pipelines and ducts Kenya Standard—Glossary of terms for hydraulic engineering and construction work Kenya Standard—Specification for sawn timber Kenya Standard—Hot dip aluminium zinc plain and corrugated steel sheets—Specification Kenya Standard—Roofing tiles—Test methods—Part 1: Water absorption test Kenya Standard—Roofing tiles—Test methods—Part 2: Permeability test Kenya Standard—Specification for joint buildings—General check list of joint functions KS EAS 148-2:2017 KS EAS 148-3:2017 KS EAS 148-4:2017 KS EAS 148-5:2017 KS EAS 148-6:2017 KS EAS 148-7:2017 KS EAS 148-8:2017 KS EAS 18-1:2017 KS EAS 18-2:2017 KS 2051-1:2007 KS 2051-2:2007 KS 2287-1:2011 KS 2338-1:2011 KS 2338-2:2011 KS '2338-3:2011 KS 2259:2012 KS 102:1984 KS 1070:1993 KS 1 0:1984 KS 1497:2001 KS 1541:1999 KS 17:1986 KS 1810:2003 KS 1937-1:2006 KS 1937-2:2006 KS 2371:1994 KS 2675-1:2017 KS 2675-2:2017 KS 299:1983 Kenya Standard—Partitions including matching linings—Part 1 Code of practice for design and installation Kenya Standard—Partitions including matching linings—Part 2: Specification for performance requirements for strength and robustness including methods of test Kenya Standard—Specification for wrought aluminium alloys extruded bars round the tube and sections Kenya Standard—Methods of test for soils for civil engineering purposes—Part 2: Classification related tests Kenya Standard—Methods of test for soils for civil engineering purposes—Part 4: Compaction related tests Kenya Standard—Methods of test for soils for civil engineering purposes—Part 5: Compressibility permeability and durability tests KS 999-2:2001 KS 999-4:2001 KS 999-5:2001 KS 999-6:2001 KS 561-1:1984 Kenya Standard—Fire tests on building materials—Part 1: Non combustibility test KS 565:1984 Kenya Standard—Specification on general principles for the verification of the safety of structures KS 566:1985 Kenya Standard—Specification for fire reistance tests — Elements of building construction KS 567:1985 Kenya Standard—Fire resistance tests—Glazed elements KS 569:1984 Kenya Standard—Determination for imposed floor loads loads in production building and warehouses KS 624:1986 Kenya Standard—Specification for bitumen roofing felts KS 657:1988 Kenya Standard—Specification for window stays fasteners and handles for vertically hinged windows KS 658:1985 Kenya Standard—Modular coordination— Vocabulary for building construction KS 681:1991 Kenya Standard—Dimensioning of drawings for buildings KS 682:1982 Kenya Standard—Specification for oxidized brown bitumen adhesive for roofing purposes KS 742:1988 Kenya Standard—Code of practice for laying— Part 1: Roofing tiles KS 754:1987 Kenya Standard—General vocabulary on building and civil engineering KS 755-1:1988 Kenya Standard—Design loading for buildings—Part 1: Code of practice for imposed loads KS 770-1:1997 Kenya Standard—Specification for test sieves— Part 1: Test sieves of metal wire cloth KS 770-2:1997 Kenya Standard—Specification for test sieves— Part 2: Test sieves of perforated metal Plate KS 770-3:1997 Kenya Standard—Specification for test sieves— Part 3: Test sieves of electroformed sheets KS 95:2003 Kenya Standard—Specification for natural aggregates for use in concrete KS 966:1999 Kenya Standard—Code of practice for anti termite measures in new buildings constructional measures KS 97:1982 Kenya Standard—Specification and methods of test for building limes quicklime and hydrated lime KS 996-3:1991 Kenya Standard—Specification for joints in building—Part 3: General check list of joint functions KS 997:1994 Kenya Standard—Specification for joints in building fundamental principles of design KS 999-1:2001 Kenya Standard—Methods of test for soils for civil engineering purposes—Part 1: General requirements and sample preparation Kenya Standard—Methods of test for soils for civil engineering purposes—Part 6: Consolidation and permeability tests in hydraulic cells and with pore pressure measurement KS 999-7:2001 Kenya Standard—Methods of test for soils for civil engineering purposes—Part 7: Shear strength tests total stress KS 999-8:2001 Kenya Standard—Methods of test for soils for civil engineering purposes—Part 8: Shear strength tests effective stress KS 999-9:2001 Kenya Standard—Methods of test for soils for civil engineering purposes—Part 9: In Situ tests KS ISO 12491:1997 Kenya Standard—Statistical methods for quality control of building materials and components KS ISO 15686-1:2011 Kenya Standard—Buildings and constructed assets service life planning—Part 1: General principles and framework KS ISO 3443-1:1979 Kenya Standard—Tolerances for building—Part 1: Basic principles for evaluation and specification KS ISO 3443-2:1979 Kenya Standard—Tolerances for building—Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes KS ISO 3443-3:1987 Kenya Standard—Tolerances for building—Part 3: Procedures for selecting target size and predicting fit KS ISO 3443-4:1986 Kenya Standard—Tolerances for building—Part 4: Method for predicting deviations for assemblies and for allocation of tolerances KS ISO 3443-5:1982 Kenya Standard—Building construction tolerances for building—Part 5: Series of values to be used for specification of telerances KS ISO 3443-6:1986 Kenya Standard—Tolerances for building—Part 6: General principles for approval criteria control of conformity with dimensional tolerance specifications and statistical control method KS ISO 3443-7:1988 Kenya Standard—Tolerances for building—Part 7: General principles for approval—Criteria control of conformity with dimensional tolerance—Specifications and statistical control method 2 statistical control methods KS ISO 3443-8:1989 Kenya Standard—Tolerances for building—Part 8: Dimensional inspection and control of construction work KS ISO 3881:1997 Kenya Standard—Building construction— Modular coordination stairs and stair openings coordinating dimensions KS ISO 7737:1986 Kenya Standard—Tolerances for building presentation of dimensional accuracy data KS ISO 9052-1:1989 Kenya Standard—Acoustics—Determination of dynamic stiffness—Part 1: Materials used under floating floors in dwellings 1 3 i! May, 2022 THE KENYA GAZETTE 2555 KS 1246:1996 Kenya Standard—Specification for soft boards for general purpose KS 1247:2005 Kenya Standard—Specification for veneer decorative plywood KS 1249:1996 Kenya Standard—Specification for fibre hardboard KS 1607:2001 Kenya Standard—Specification for wooden packaging cases KS 2222:2010 Kenya Standard—Synthetic resin adhesives for plywood—Specification KS 2226:2010 Kenya Standard—Plywood test method KS 2280:2011 Kenya Standard—Laminate floor coverings elements with a surface layer based on aminoplastic thermosetting resins— Specification KS 2281:2011 Kenya Standard—Plywood and composite board Specification KS 27064:2017 Kenya Standard— Fibreboards — Specification— Part 1: General requirements KS 2706-2:2017 Kenya Standard— Fibreboards— Specification Part 2: Requirements for dry process boards KS 301-2:2010 Kenya Standard—Plywood—Specification— Part 2: Marine plywood KS 301-3:2010 Kenya Standard—Plywood— Specification— Part 3: Shuttering work plywood KS 982-11:1990 Kenya Standard—Test methods for determination of physical and mechanical properties of wood—Part 11 Ultimate stress in compression parallel to grain KS EAS 323:2002 Kenya Standard—Specification for wood preservation by means of pressure creosoting KS 1605:2001 Kenya Standard—Specification for hardwood poles droppers laths guardrail post and spacer blocks KS 1606:2001 Kenya Standard—Specification for wood blocks for floors Kenya Standard—Wood preservatives—Part 1: Determination of the effectiveness against lyctus brunneus stephens application by surface treatment laboratory method Kenya Standard—Wood preservatives—Part 2: Determination of preventive action against recently hatched larvae of hylotrupes bajulus linnaeus laboratory method Kenya Standard—Wood preservatives—Part 3: Determination of preventive effect on reticulitermes santonensis de feytaud laboratory method Kenya Standard—Wood preservatives—Part 4: Test method for determining the protective effectiveness against wood destroying basidiomycetes determination of the toxic values laboratory method Kenya Standard—Wood preservatives—Part 6: Determination of the protective effectiveness against anobium punctatum de geer by egg laying and larval survival application by surface treatment laboratory method Kenya Standard—Nomenclature of commercial Kenya timbers Kenya Standard—Wood mosaic parquet— Specification Kenya Standard—Wood poles for power and telecommunication lines—Specification KS 562:1987 Kenya Standard—Fire tests on door assemblies—Evaluation of performance of smoke control door assemblies KS 568:1985 Kenya Standard—Fire resistance tests door and shutter assemblies KS 656-1:2006 Kenya Standard—Flush door leafs Specification—Part 1: Solid core type KS 656-2:2006 Kenya Standard—Flush door leafs Specification—Part 2: Cellular and semi solid core tyre KS 659:1986 Kenya Standard—Classification and measurement of plywood panels and test pieces KS 771:1991 Kenya Standard—Specification for softwood timber grades for structural use KS 828-1:2009 Kenya Standard—Structural use of timber—Part 1: Permissible stress design materials and workmanship code of practice KS 866:1990 Kenya Standard—Test methods for the assessment of resistance of surface of furniture to cold liquids KS 93:1984 Kenya Standard—Glossary of terms used in timber KS 982-1:1990 Kenya Standard—Methods of test for determining of physical and mechanical properties of wood—Part I: Moisture content KS 982-10:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 10: Resistance to impact identation KS 982-12:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 12: Sampling and general requirements KS 982-2:1990 Kenya Standard—Methods of test for determining of physical and mechanical properties of wood—Part 2: Density KS 982-3:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 3: Testing in compression perpendicular to grain KS 982-4:1990 Kenya Standard—Methods of test for determining of physical and mechanical properties of wood—Part 4: Ultimate strength in static bending KS 982-5:1990 Kenya Standard—Methods of test for determining of physical and mechanical properties of wood—Part 5: Ultimate tensile stress parallel to grain KS 982-6:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 6: Ultimate shearing stress parallel to grain KS 982-7:1990 Kenya Standard—Methods of test for determination of physical and mechanical properties of wood—Part 7: Impact bending strength KS 982-8:1990 Kenya Standard — Methods of test for determination of physical and mechanical properties of wood—Part 8: Modulus of elasticity in static bending KS 982-9:1990 Kenya Standard—Methods of test for the determination of physical and mechanical properties of wood—Part 9: Static hardness KS EAS 23:2000 Kenya Standard—Timber—Dimensions for coniferous sawn timber cypress and pine sizes of sawn and planed timber—Specification KS 1804-1:2003 KS 1804-2:2003 KS 1804-3:2003 KS 1804-4:2003 KS 1804-6:2003 KS 19:1976 KS 448:2010 KS 516:2008 KS IEC 60051-1:2016 Kenya Standard—Direct indicating analogue electrical measuring instruments and their accessories—Part 1: Definitions and general requirements common to all parts KS ISO 2533:1975 Kenya Standard—Standard atmosphere hypsometrical tables KS IEC 60422:2013 Kenya Standard—Mineral insulating oils in electrical equipment—Supervision and maintenance guidance KS IEC 60270:2015 Kenya Standard—High-voltage test techniques—Partial discharge measurements KS IEC 61865: 2001 Kenya Standard—Overhead lines—Calculation of the electrical component of distance between live parts and obstacles—Method of calculation KS 1868:2007 Kenya Standard—Overhead power lines— Loading tests on structures KS 1625:2001 Kenya Standard—Specification for voltage bands for electrical installations of buildings KS 1827:2007 Kenya Standard—Voltage characteristics of electricity supplied by public distribution systems KS ISO 4190-5:2006 Kenya Standard—Lifts and service lifts (USA: Elevators and dumbwaiters) —Part 5: Control devices signals and additional fittings KS ISO 4190-2:2001 Kenya Standard—Lifts (US: Elevator) installation—Part 2: Class IV lifts KS 2169-1:2010 Kenya Standard—Safety rules for the construction and installation of lifts—Part 1: Electric lifts KS 2291-1:2011 Kenya Standard—Safety escalators and moving walks—Part 1: Construction and installation KS ISO 4190-3:1982 Kenya Standard—Passenger lifts installations— Part 3: Service lifts class V KS 1859-3:2010 Kenya Standard—Electrical power transmission and distribution- High-voltage operating regulations—Part 3: Model regulations— Recommended model regulations relating to power systems for operating, access control and supervision of systems that exceed 1000 v, distribution of electricity KS 1876-1:2010 Kenya Standard—Electrical power transmission and distribution—Overhead power lines for cg editions prevailing in Kenya—Part 1: Code of practice KS 1587:2007 Kenya Standard—National electrical safety code KS 1187:1993 Kenya Standard—Specification for metallic clips for electrical wiring KS 1876-2:2010 Kenya Standard—Electric power transmission and distribution—Overhead power lines for conditions prevailing in Kenya—Part 2: Safety KS 1877:2010 Kenya Standard—Electrical power transmission and distribution—Guidelines for the application design planning and construction of medium voltage overhead power lines up to and including 22 Kv using wooden pole structures and bare conductors KS 1878-0:2010 KS 1878-1:2010 Kenya Standard—Electrical power transmission and distribution—Guidelines for the provision of electrical distribution networks in residential areas—Part 0: Definitions Kenya Standard—Electrical power transmission and distribution—Guidelines for the provision Of electrical distribution networks in residential areas—Part 1: Planning and design of distribution systems KS EAS 24:2000 Kenya Standard—Timber industry—Glossary of terms KS EAS 276:2007 Kenya Standard—Timber—Determination of volumetric swelling KS EAS 322:2002 Kenya Standard—Wood poles and blocks for power and telecommunication lines— Specification KS EAS 325:2002 Kenya Standard—Wood preservatives and treated timber—Guide to sampling and preparation of wood preservatives and treated timber for analysis KS ISO 13061-10:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 10: Determination of impact bending strength KS ISO 13061-11:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 11: Determination of resistance to impact indentation KS ISO 13061-12:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 12: Determination of static hardness KS ISO 13061-15:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 15: Determination of radial and tangential swelling KS ISO 13061-16:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 16: Determination of volumetric swelling KS ISO 13061-17:2017 Kenya Standard—Physical and mechanical properties of wood—Test methods for small clear wood specimens—Part 17: Determination of ultimate stress in compression parallel to grain KS ISO 1804:1999 Kenya Standard—Door—Terminology KS ISO 18100:2017 Kenya Standard—Timber structures—Finger jointed timber—Manufacturing and production—Requirements KS ISO 6612:1999 Kenya Standard—Windows and door height windows—Wind resistance test KS ISO 8248:1999 Kenya Standard—Windows and door height windows—Mechanical test KS ISO 8269:1999 Kenya Standard—Specification for door and doorsets—Static loading test KS ISO 8270:1985 Kenya Standard— Doorsets soft heavy —Body impact test KS ISO 8272:1999 Kenya Standard—Specification for doorsets— Air permeability test KS ISO 8273:1999 Kenya Standard—Specification for dpor and doorsets-Standard atmospheres for testing the performance of doors and doorsets placed between different climates KS ISO 8275:1999 Kenya Standard—Specification for doorsets Vertical load test KS ISO 8375:2017 Kenya Standard—Timber structures glued laminated timber—Test methods for determination of physical and mechanical properties Electrotechnical KS IEC 60050-881:1983 Kenya Standard—International Electrotechnical Vocabulary Chapter 881: Radiology and radiological physics 13th May, 2022 THE KENYA GAZETTE 2557 Kenya Standard—Electrical power transmission and distribution—Guidelines for the provision of electrical distribution networks in residential areas—Part 2-3: Preferred methods and materials for the installation Kenya Standard—Electrical power transmission and distribution—Guidelines for the provision of electrical distribution networks in residential areas—Part 3: Overhead distribution in very low, low and moderate consumption areas, including rural areas and informal settlements Kenya Standard—Electrical power transmission and distribution—Overhead power lines installation of line conductors Kenya Standard—Electrical power transmission and distribution—Code of practice for animal deterrents for electric power supply substations Kenya Standard—Electric power transmission and distribution—Energized power lines maintenance methods Kenya Standard—Electrical power transmission and distribution—High voltage operating regulations—Part 2: Voltage colour coding diagrammatic displays in control rooms colour coding for wall mounted operating diagrams and electronic displays relating to the generation, transmission and distribution of electricity Kenya Standard—Electrical power transmission and distribution—High voltage operating regulations—Part 5: Standard procedure and terminology for the issuing of operating instructions Kenya Standard—Electricity supply quality of supply—Part 1: Minimum standards Kenya Standard—Electricity supply quality of supply—Part 2: Reporting Guidelines Kenya Standard—Electricity supply quality of supply—Part 3: Voltage characteristics compatibility levels limits and assessment methods KS ISO 6490-2:1983 Kenya Standard—Analysis of animal feeding stuffs—Determination of calcium content—Part 2: Atomic Absorption Spectrometric Method, withdrawn without replacement KS ISO 6495:1999 Kenya Standard— Animal feeding stuffs— Determination of water soluble chlorides content to be replaced by KS ISO 6495-1:2015 KS 2358:2012 Kenya Standard—Maize gluten meal Specification, to be replaced by KS EAS 232:2020 KS 785:2012 Kenya Standard—Specification for bone meal, to be replaced by KS EAS 231:2020 KS 954:2012 Kenya Standard—Specification for maize gluten feed, to be replaced by KS EAS 232:2020 KS CAC/MRL 2:2017 Kenya Standard—Maximum Residue Limits (MRLs) and Risk Management Recommendations (RMRs) for residues of veterinary drugs in foods, to be replaced by KS CAC/MRL 2:2018 Kenya Standard—Maize—Determination of moisture content (on milled grains and on whole grains), to be replaced by KS ISO 6540:2021 Kenya Standard—coal and coke—Calculation of analyses to different bases, to be replaced by KS ISO 1170:2020 5163:2005 Kenya Standard—Petroleum products — Determination of knock characteristics of motor and aviation fuels —Motor method, to be replaced by KS ISO 5163:2014 Kenya Standard—Petroleum products— Determination of knock characteristics of motor fuels—Research method, to be replaced by KS ISO 5164:2014 Kenya Standard—Fluid power systems and components—Vocabulary, to be replaced by KS ISO 5598:2020 Kenya Standard—Petroleum and related products from natural or synthetic sources— Determination of pour point, to be replaced by KS ISO 3016:2019 KS 1878-2-3:2010 KS 1878-3:2010 KS 1883:2010 KS 1902:2010 KS 1917:2010 KS 1859-2:2010 KS 1859-5:2010 KS 2236-1:2010 KS 2236-2:2010 KS 2236-3:2010 KS ISO 6540:1995 KS ISO 1170:1977 KS ISO KS ISO 5164:2005 KS ISO 5598:2008 KS ISO 3016:1994 KS 2236-4:2010 Kenya Standard—Electricity supply quality of supply—Part 4: Application guidelines for utilities KS 662-3:2001 Kenya Standard—Kenya wiring regulations— Part 3: Assessment of general characteristics KS 662-4:2000 Kenya Standard—Kenya wiring regulations— Part 4: Protection for safety KS IEC 60670-1:2015 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 1: General requirements The following standards are hereby withdrawn forthwith; Kenya Standard—Tea industry—Code of practice, to be replaced by KS 2128:2022 Kenya Standard—Tea—Raw material for extraction—Specification, to be replaced by KS 2404:2022 Kenya Standard—Specification for baker's yeast, to be replaced by KS EAS 997:2020 Kenya Standard—Dairy cattle feed premix — Specification, to be replaced by KS 2500: 2022 Kenya Standard—Poultry feed premixes — Specification, to be replaced by KS 2508: 2022 Kenya Standard—Glossary of terms for animal feedstuffs, to be replaced by KS ISO 20588 :2019 KS ISO 8216-1:2005 Kenya Standard—Petroleum products—Fuels (class F) classification—Part 1: Categories of marine fuels to be replaced by KS ISO 8216- 1:2017 KS ISO 8217:2005 Kenya Standard—Petroleum products —Fuels (class F)—Specifications of marine fuels, to be replaced by KS ISO 8217:2017 12156-1:2016 Kenya Standard—Diesel fuel—Assessment of lubricity using the high-frequency reciprocating rig (HFRR)—Part 1: Test method, to be replaced by KS ISO 12156-1:2018 12156-2:2007 Kenya Standard—Diesel fuel—Assessment of lubricity using the high-frequency reciprocating rig (11FRR)—part 2: Limit, to be replaced by KS ISO 12156-2:2017 12917-1:2002 Kenya Standard—Petroleum and liquid petroleum products—Calibration of horizontal cylindrical tanks—Part 1: Manual methods, to be replaced by KS ISO 12917-1:2017 13357-1:2002 Kenya Standard—Petroleum products— Determination of the filterability of lubricating oils—Part 1: Procedure for oils in the presence of water, to be replaced by KS ISO 13357- 1:2017 KS ISO 13357-2:2005 Kenya Standard—Petroleum products— Determination of the filterability of lubricating oils—Part 2: Procedure for dry oils, to be replaced by KS ISO 13357-2:2017 KS 2128:2015 KS 2404:2015 KS 684:1988 KS 2500: 2014 KS 2508: 2014 KS 1651:2000 KS ISO KS ISO KS ISO KS ISO KS ISO 3405:2011 KS ISO 3924:2016 KS ISO 4264:2007 KS ISO 5165:1998 KS ISO 6246:1995 KS ISO 384:1978 Kenya Standard—Petroleum products— Determination of sulfur content of automotive fuels— Ultraviolet fluorescence method, to be replaced by KS ISO 20846:2019 Kenya Standard—Petroleum products and lubricants—Determination of cone penetration of lubricating greases and petrolatum, to be replaced by KS ISO 2137:2020 Kenya Standard—Petroleum and related products from natural or synthetic sources— Determination of cloud point, to be replaced by KS ISO 3015:2019 Kenya Standard—Petroleum products— Transparent and opaque liquids—Determination of kinematic viscosity and calculation of dynamic viscosity, to be replaced by KS ISO 3104:2020 Kenya Standard—Petroleum and related products from natural or synthetic sources— Determination of distillation characteristics at atmospheric pressure, to be replaced by KS ISO 3405:2019 KS ISO 20846:2004 KS ISO 2137:2007 KS ISO 3015:1992 KS ISO 3104:1994 Kenya Standard—Petroleum products— Determination of boiling range distribution— Gas chromatography method, to be replaced by KS ISO 3924:2019 Kenya Standard—Petroleum products — Calculation of cetane index of middle-distillate fuels by the four variable equation, to be replaced by KS ISO 4264:2018 Kenya Standard—Petroleum products— Determination of the ignition quality of diesel fuels —Cetane engine method, to be replaced by KS ISO 5165:2020 Kenya Standard—Petroleum products—Gum content of fuels—Jet evaporation method, to be replaced by KS ISO 6246:2017 Kenya Standard—Laboratory glass and plastics ware—Principles of design and construction of volumetric instruments, to be replaced by KS ISO 384:2015 Kenya Standard—Laboratory glassware — Boiling flasks with conical ground joints, to be replaced by KS ISO 4797:2015 Kenya Standard— Glassware — Hydrolytic resistance of the interior surfaces of glass containers—Part 1: Determination by titration method and classification, to be replaced by KS ISO 4802-1:2016 Kenya Standard—Glassware—Hydrolytic resistance of the interior surfaces of glass containers—Part 2: Determination by flame spectrometry and classification, to be replaced by KS ISO 4802-2:2016 KS I Kenya Standard—Laboratory glassware—Filter flasks, to be replaced by KS ISO 6556:2012 KS 8 _ Kenya Standard—Laboratory glassware — Borosilicate glass tubing, to be replaced by KS ISO 4803:2021 KS ISO KS ISO 10545-10:1995 Kenya Standard—Ceramic tiles—Part 10: Determination of moisture expansion, to be replaced by KS ISO 10545-10:2021 10545-15:1995 Kenya Standard—Ceramic tiles—Part 15: Determination of lead and cadmium given off by tiles, to be replaced by KS ISO 10545- 15:2021 KS ISO 4797:2004 KS ISO 4802-1:1988 KS ISO 4802-2:1998 SO 6556:1981 ISO 4803:197 KS IEC 60068-1:1988 Kenya Standard—Environmental testing—Part 1: General and guidance, to be replaced by KS IEC 60068-1:2013 KS ISO 91-2:1991 Kenya Standard—Petroleum and related products—Temperature and pressure volume correction factors, to be replaced with KS ISO 91:2017 KS EAS 31:2013 Kenya Standard—Laundry soap—Specification, to be replaced by KS EAS 31:2021 KS EAS 294:2001 Kenya Standard—Scouring powder— Specification to be replaced by KS EAS 294:2021 KS ISO 5667-10:1992 Kenya Standard—Water quality —Sampling — Part 10: Guidance on sampling of waste waters, to be replaced by KS ISO 5667-10:2020 KS ISO 5667-1:1980 Kenya Standard—Water quality — Sampling — Part 1: Guidance on the design of sampling programmes, to be replaced by KS ISO 5667- 1:2020 KS ISO 5667-3:2003 Kenya Standard —Water quality— Sampling — Part 3: Guidance on the preservation and handling of water samples, to be replaced by KS ISO 5667-3:2018 KS ISO 5667-6:2005 Kenya Standard—Water quality - Sampling— Part 6: Guidance on sampling of rivers and streams, to be replaced by KS ISO 5667-6:2014 KS ISO 7899-2:1999 Kenya Standard—Specification for water quality—Detection and enumeration of faecal streptococci—Part 2: Method by membrane filtration, to be replaced by KS ISO 7899- 2:2000 KS ISO 10703:1997 Kenya Standard — Water quality— Determination of the activity concentration of radionuclides by high resolution gamma ray spectrometry, to be replaced by KS ISO 10703:2021 KS ISO 11260:1994 Kenya Standard—Soil quality—Determination of effective cation exchange capacity and base saturation level using barium chloride solution, to be replaced by KS ISO 11260:2018 KS ISO 1272:1999 Kenya Standard—Essential oils—Determination of phenols content, to be replaced by: KS ISO 1272:2000 KS ISO 210:1999 Kenya Standard—Essential oils—Packing, to be replaced by KS ISO/TS 210:2014 KS ISO 211:1999 Kenya Standard—Essential oils—Labelling and marking containers, to be replaced by KS ISO/TS 211:2014 KS ISO 212:1999 Kenya Standard—Essential oils—Sampling, to be replaced by KS ISO 212:2007 KS ISO 3218:1999 Kenya Standard—Essential oils—Principles of nomenclature, to be replaced by KS ISO 3218:2014 KS ISO 3523:1976 Kenya Standard—Oil of Cananga (Cananga odorata (Lam) Hook. f. et Thomson, forma macmphylla), to be replaced by KS ISO 3523:2002 KS ISO 3524:1977 Kenya Standard—Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)], to be replaced by KS ISO 3524:2003 KS ISO 3525:1979 Kenya Standard-Oil of amyris (Amyris balsanufera L.), to be replaced by KS ISO 3525:2008 KS ISO 3848:2001 Kenya Standard— Essential oil of citronella, Java type, to be replaced by. KS ISO 3848:2016 13th May, 2022 THE KENYA GAZETTE 2559 Kenya Standard—Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.); to be replaced by KS ISO 3849:2003 Kenya Standard—Essential oils — Nomenclature; to be replaced by KS ISO 4720:2018 Kenya Standard—Oil of Cedarwood Virginia Juniperus Virginiana Linnaeus, to be replaced by KS ISO 4724:2004 Kenya Standard—Oil of Cedarwood Texas Juniperus Mexicana Schiede, to be replaced by KS ISO 4725:2004 Kenya Standard—Oil of Palmarosa Cymbopogon Martinii Roxburgh W Watson Var Motia. to be replaced by KS ISO 4727:2021 Kenya Standard—Essential oils—Determination of ester value, to be replaced by: KS ISO 709:2001 Kenya Standard—Cosmetics—Microbiology — Evaluation of the antimicrobial protection of a cosmetic product, to be replaced by: KS ISO 11930:2019 Kenya Standard—Textiles—Reusable sanitary towels—Specification, to be replaced by KS 2925:2022 Kenya Standard—Specification for ladies knitted briefs, to be replaced by KS 525:2022 Kenya Standard--Specification for standard wool adjacent fabric, to be replaced by KS ISO 105-F01:2001 Kenya Standard-- Method for determination of added oil content of sisal or jute yarn of fabric, to be replaced by KS EAS 246:2001 Kenya Standard— Standard physical methods of lest for non-woven fabrics—Part 1: Determination of mass per unit area, to be replaced by ISO 9073-1:1989 Kenya Standard—Fabrics—Methods for determination of bursting strength and bursting distension, to be replaced by KS ISO 13938- 1:2019 and KS ISO 13938-2:2019 Kenya Standard --Methods for estimation of moisture total size or finish ash fatty matter and determination of water soluble matter in textiles, to be replaced by KS EAS 257:2001 Kenya Standard—Specification for standard adjacent fabrics—Part 6: Secondary acetate, to be replaced by KS ISO 105-F07:2001 Kenya Standard—Specification for standard fabrics—Part 8: Cotton, to be replaced by KS ISO 105-F02:209 KS 525:1984 KS 262:1981 KS 1286:1993 KS 1038-1:1991 KS 631:2005 264:1981 KS 607-6:1990 KS 607-8:1990 KS ISO 3849:1981 KS ISO 4720:1992 KS ISO 4724:1984 KS ISO 4725:1986 KS ISO 4727:1988 KS ISO 709:1999 KS ISO 11930:2012 KS 2925:2020 KS 267-2:1983 Kenya Standard—Conversion tables and methods of designation of textile yams—Part 2: Universal system for designation of linear density of yarns tex system, to be replaced by KS ISO 1144:2016 KS ISO 2076:2010 Kenya Standard-- Textiles —Man made fibres generic names, to be replaced by KS ISO 2076:2021 KS ISO 2307:1990 Kenya Standard—Ropes—Determination of certain physical and mechanical properties, to be replaced by ISO 2307:2019 KS 267-1:1983 Kenya Standard—Conversion tables and methods of designation of textile yarns—Part 1: Method of designation of yarns, to be replaced by KS ISO 1139:1973 KS 1389-2:1998 Kenya Standard— Methods for cotton fibres— Part 2: Determination of micronaire value of cotton fibres, to be replaced by KS ISO 2403:2021 KS ISO 3175-1:2010 Kenya Standard— Textiles — Professional care drycleaning and wetcleaning of fabrics and garments—Part 1: Assessment of performance after cleaning and finishing, to be replaced by KS ISO 3175-1:2017 KS ISO 3175-2:2010 Kenya Standard—Textiles—Professional care drycleaning and wetcleaning of fabrics and garments—Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene, to be replaced by KS ISO 3175-2:2017 KS ISO 3175-3:2003 Kenya Standard—Textiles—Professional care drycleaning and wetcleaning of fabrics and garments—Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents, to be replaced by KS ISO 3175-3:2017 KS ISO 3175-4:2003 Kenya Standard—Textiles—Professional care drycleaning and wetcleaning of fabrics and garments—Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning. To be replaced by KS ISO 3175-4:2018 KS ISO 30023:2010 Kenya Standard — Textiles -- Qualification symbols for labelling work wear to be industrially laundered, to be replaced by KS ISO 30023:2021 KS ISO 6330:2012 Kenya Standard -- Textiles — Domestic washing and drying procedures for textile testing, to he replaced by ISO 6330:2021 KS 125:1979 Kenya Standard-- Method for removal of non fibrous matter from textiles prior to quantitative chemical analysis, to be replaced by KS ISO 1833-1:2020 KS 1137:1993 Kenya Standard---Methods for the instrumental assessment of whiteness, to be replaced by KS ISO 105-J02:1997 KS 1223:1999 Kenya Standard—Method for instrumental assessment of the degree of staining of adjacent fabrics, to be replaced by KS ISO 105- A04:1989 KS EAS 236:2001 Kenya Standard—Textile materials—Tests for colour fastness due to drycleaning, to be replac'%1 by, KS ISO 105-D01:2010 KS EAS 237:2001 Kenya Standard—Textile materials—Tests for colour fastness due to washing, to be replaced ;- W5-C10:2006 i. iiindard—Textiles-- Tests for colour fastness colour fastness to light daylight, to be KS ISO-B01:2014 KS ISO 13938-1:1999 Kenya Standard--Bursting properties of fabrics--Part 1: Hydraulic method for determination of bursting strength and bursting distension, to be replaced by KS ISO 13938- 1:2019 KS ISO 13938-2:1999 Kenya Standard—Textiles—Bursting properties of fabrics—Part 2: Pneumatic method for determination of bursting strength and bursting distension, to be replaced by KS ISO 13938-2:2019 KS 607- i -5:1985 Kenya Standard—Specification for standard adjacent fabrics, to be replaced by KS ISO 10f - F03:2001, KS ISO 105-F04:2001 and KS 105-F05:2001 KS ISO 5323:1984 KS ISO 6442:1999 KS ISO 6443:1999 KS ISO 6444:1999 KS ISO 6445:1999 KS ISO 8274:1999 KS ISO 9379:1989 KS ISO 9381:1999 KS ISO 1954:1999 KS ISO 2074: 1972 KS 154:2000 KS EAS 188:2000 KS 204-1:1992 KS 204-2:1992 KS 1339:1996 KS 1086:1992 KS 637:1986 KS 636:1985 KS 634:1985 KS 635:1985 KS 707-1:1986 KS 708:1986 KS 8:1992 Kenya Standard—Wood flooring and parquet— Vocabulary, to be replaced by KS ISO 5323:2019 Kenya Standard—Door leaves—Measurement of defects of general flatness, to be replaced by KS ISO 6442:2005 Kenya Standard—Door leaves—Measurement of dimensions and of defects of squareness, to be replaced by KS ISO 6443:2005 Kenya Standard—Door leaves—Test of behaviour under humidity variations (successive uniform climates), to be replaced by KS ISO 6444:2005 Kenya Standard—Doors and doorsets —Test of behaviour between two different climates, to be replaced by KS ISO 6445:2005 Kenya Standard—Doorsets—Determination of closing force, to be replaced by KS ISO 8274:2005 Kenya Standard —Doorsets—Repeated opening and closing test, to be replaced by KS ISO 9379:2005 Kenya Standard —Doorsets—Stadc torsion test, to be replaced by KS ISO 9381:2005 Kenya Standard—Plywood—Tolerances on dimensions, to be replaced by KS ISO 1954:2013 Kenya Standard—Plywood—Vocabulary, to be replaced by KS ISO 2074:2007 Kenya Standard—Specification for both plain and fork hoes, to be replaced by KS EAS 132:2021 Kenya Standard — Machetes — Specification, to be replaced by KS EAS 188:2021 Kenya Standard—Specification for shovels— Part 1: Mild steel shovels, to be replaced by KS EAS 1020:2021 Kenya Standard—Specification for shovels— Part 2: Medium steel shovels, to be replaced by KS EAS 1020:2021 Kenya Standard—Specification for hand hammers, to be replaced by KS EAS 1021:2021 Kenya Standard—Specification for hacksaw blades, to be replaced by KS EAS 1022:2021 Kenya Standard—Specification for dial gauges reading in 0.01 mm, to be replaced by KS ISO 463:2006 Kenya Standard—Specification for micrometer caliper for external measurement, to be replaced by KS ISO 3611:2010 Kenya Standard—Specification for vernier calipers reading to 0.1 mm and 0.05 mm, to be replaced by KS ISO 13385-1:2019 Kenya Standard—Specification for vernier calipers reading to 0.02 mm. to be replaced by KS ISO 13385-2:2020 Kenya Standard—Glossary of gear terms—Part 1: Geometrical definitions, to be replaced by KS ISO 1122-1:1998 Kenya Standard—Specification for cylindrical parallel involute gears-system of accuracy to be replaced by KS ISO 21771:2007 Kenya Standard—Units and recommendations for the use of their multiples and of certain other units, to be replaced by KS ISO 80000-1:2009 KS ISO 105-1303:1994 Kenya Standard—Textiles—Tests for colour fastness—Part B03: Colour fastness to weathering outdoor exposure, to be replaced by KS ISO 105-B03:2017 KS ISO 3(171:2005 Kenya Standard—Textiles—Determination of pH of aqueous extract, to be replaced by KS ISO 3175:2020 KS ISO 1833-22:2013 Kenya Standard—Textiles—Quantitative chemical analysis—Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride), to be replaced by KS ISO 1833- 22:2020 KS ISO 11612:1998 Kenya Standard—Clothing for protection against heat and flame—Test methods and performance requirements for heat protective clothing, to be replaced by KS ISO 11612:2015 KS ISO 20743:2013 Kenya Standard—Textiles—Determination of antibacterial activity of textile products, to be replaced by KS ISO 20743:2021 KS 1038-3:1990 Kenya Standard—Physical methods of test for non-woven fabrics—Part 3: Determination of tensile strength and elongation, to be replaced by KS ISO 9073-3:1989 KS ISO 6530:1990 Kenya Standard — Clothing for limited protection against dangerous liquid chemicals— Resistance to penetration marking, to be replaced by KS ISO 6530:2005 KS 835-1:1988 Kenya Standard—Methods of test for textile floor coverings—Part 1: Determination of dimensions, to be replaced by KS ISO 3018:1974 KS ISO 9405:1990 Kenya Standard—Textile floor coverings— Assessment of changes in appearance, to be replaced by KS ISO 9405:2015 KS ISO 2424:1992 Kenya Standard—Textile floor coverings— Vocabulary, to be replaced by ISO 2424:2007 KS ISO 22156:2004 Kenya Standard—Bamboo structures—Bamboo culms structural design, to be replaced by KS ISO 22156:2021 KS ISO 13786:1999 Kenya Standard—Thermal performance of building components—Dynamic thermal characteristics—Calculation methods, to be replaced by KS ISO 13786:2017 KS ISO 6241:1984 Kenya Standard—Performance standards in buildings—Principles for their preparation and factors to be considered, to be replaced by KS ISO 19208:2016 KS ISO 6514:1982 Kenya Standard—Building construction— Modular coordination—Sub-modular increments, to be replaced by KS ISO 21723:2019 KS ISO 6707-2:1993 Kenya Standard—Building and civil engineering—Vocabulary —Part 2: Contract terms, to be replaced by KS ISO 6707-2:2017 KS ISO 6946:1996 Kenya Standard—Building components and building elements—Thermal resistance and thermal transmittance—Calculation methods, to be replaced by KS ISO 6946:2017 KS ISO 3008:1976 Kenya Standard—Fire resistance tests—Door and shutter assemblies, to be replaced by KS ISO 3008-1:2019 KS ISO 4211:1979 Kenya Standard—Furniture—Assessment of surface resistance to cold liquids, to be replaced by KS ISO 4211-2:2013, KS ISO 4211-3:2013, KS ISO 4211-4:1988 and KS ISO 4211-5:2021 13th May, 2022 THE KENYA GAZETTE 2561 KS IEC 60670-21:2004 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations— Part 21: Particular requirements for boxes and enclosures with provision for suspension means, to be replaced by KS IEC 60670-21:2016 KS IEC 60670-22:2003 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22: Particular requirements for connecting boxes and enclosures, to be replaced by KS IEC 60670-22: KS IEC 60670-23:2006 Kenya Standard—Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23: Particular requirements for floor boxes and enclosures, to be replaced by KS IEC 60670-23: 2016 KS IEC 61936-1:2014 Kenya Standard—Power installations exceeding 1 kV a.c.—Part 1: Common rules, to be replaced by KS IEC 61936-1:2021 KS IEC 60034-3:2007 Kenya Standard—Rotating electrical machines—Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines, to be replaced by KS IEC 60034-3:2020 KS IEC 60826:2003 Kenya Standard—Design criteria of overhead transmission lines, to be replaced by KS IEC 60826:2017 KS ISO IEC 11801:2008 Kenya Standard—Information technology generic cabling for customer premises, to be replaced by (KS ISO/IEC 11801-1:2017, (KS ISO IEC 11801-1:2017 Cor 1:2018); KS ISO/IEC 11801-2:2017; KS ISO/IEC 11801 3:2017 (KS ISO IEC 11801-3;2017 Amd I 2021; KS ISO IEC 11801-3;2017 Cor 1;2018) KS ISO/IEC 11801-4:2017 (KS ISO IEC 11801-4:2017 Cor 1 2018); KS ISO/IEC 11801- 5:2017 (KS ISO IEC 11801-5:2017 Cor 1;2018); KS ISO/IEC 11801-6:2017 (KS ISO IEC 11801-6;2017 Cor 1:2018); KS ISO/IEC TR 11801-9901:2014; KS ISO/IEC TR 11801- 9902:2017; KS ISO/1EC TS 11801-9903:2021; KS ISO/IEC TR 11801-9904:2017; KS ISO/IEC TR 11801-9905:2018; KS ISO/IEC TR 11801- 9906:2020; KS ISO/IEC TR 11801-9907:2019; KS ISO/IEC TR 11801-9908:2020; KS ISO/IEC TR 11801-9909:2020; KS ISO/IEC TR 11801- 9910:2020.) KS 1505-1:2000 Kenya Standard—Specification for radio interference characteristics of overhead power lines and high voltage equipment—Part 1: Description of the phenomenon, to be replaced by KS CISPR/TR 18-1:2017 KS 1505-2:2000 Kenya Standard—Specification for radio interference characteristics of overhead power lines and high voltage equipment—Part 2: Methods of measurement and procedure for determining limits, to be replaced by KS CISPR/TR 18-2:2017 KS 1505-3:1999 Kenya Standard—Specification for radio interference characteristics of overhead power lines and high voltage equipment—Part 3: Code of practice for minimizing the generation of radio noise, to be replaced by KS CISPR/TR 18- 3:2017 KS IEC 61969-1:2011 Kenya Standard—Mechanical structures for electrical and electronic equipment—Outdoor enclosures—Part 1: Design guidelines, to be replaced by KS IEC 61969-1:2020 KS IEC 62053-21:2003 Kenya Standard—Electricity metering equipment (a.c.)—Particular requirements—Part 21: Static meters for AC active energy (classes 0,5, 1 and 2), to be replaced by KS IEC 62053- 21: 2020 KS IEC 62053-22:2003 Kenya Standard--Electricity metering equipment—Particular requirements—Part 22 Static meters for AC active energy (classe 0,1S, 0,2S and 0,5S), to be replaced by KS IEC 62053-22: 2020 KS IEC 62053-23:2003 Kenya Standard—Electricity metering equipment (a.c.)— Particular requirements—Part 23: Static meters for reactive energy (classes 2 and 3), to be replaced by KS IEC 62053 23: KS IEC 62052-11:2003 Kenya Standard—Electricity metering equipment—General requirements, tests and test conditions—Part 11: Metering equipment, to be replaced by KS IEC 62052-11:2020 KS IEC 60282-1:2009 Kenya Standard—High-voltage fuses—Part 1: Current-limiting fuses, to be replaced by KS IEC 60282-1: 2020 KS EAS 378-5-6:2005 Kenya Standard—Low--voltage switchgear and controlgear —Part 5-6: Control circuit devices and switching elements—DC interface for proximity sensors and switching amplifiers (NAMUR), to he replaced by KS IEC 60947-5- 6:1999 KS EAS 388-2:2005 Kenya Standard—High-voltage fuses—Part 2: Expulsion fuses, to be replaced by KS IEC 60282-2: 2008 KS ISO/IEC/IEEE 24765:2010 Kenya Standard—Systems and software engineering--Vocabulary, to be replaced by KS ISO/IEC/IEEE 24765:2017 Dated the 4th May, 2022. BERNARD N. NJIRAINI, PTG No. 2159/21-22 Secretary, National Standards Council.