GAZETTE NOTICE NO. 10042

PURSUANT to section 9(1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the Schedule hereto to be Kenya Standards, with effect from the date of publication of this notice. Number Title of Specification or Code of Practice Food KS ISO 18449:2021Kenya Standard — Green tea — Vocabulary, First Edition KS ISO 18447:2021Kenya Standard — Tea — Determination of the aflavins in black tea — Method using high performance liquid chromatography, First Edition KS ISO 3103:2019 Kenya Standard — Tea — Preparation of liquor for use in sensory tests, Second Edition KS ISO 22994:2021 Kenya Standard — Coffee extracts — Determination of the dry matter content of coffee extracts — Sea sand method of liquid or pasty coffee extracts, First Edition KS ISO 24115:2012 Kenya Standard — Green coffee — Procedure for calibration of moisture meters — Routine method, First Edition KS ISO 18862:2016 Kenya Standard — Coffee and coffee products — Determination of acrylamide — Methods using HPLC-MS/MS and GC-MS after derivatization, First Edition KS 2954:2022 Kenya Standard — Cake mixes — Specification, First Edition KS 1517:2022 Kenya Standard — Dairy based desserts — Specification, Third Edition KS 703:2022 Kenya Standard — Reconstituted, recombined and toned pasteurized milk — Specification, Second Edition KS 2956:2022 Kenya Standard — Vegetable Juices and drinks — Specification, First Edition KS 1311:2022 Kenya Standard — Canned (baked) beans in tomato sauce — Specification, Second Edition KS ISO 17410:2019 Kenya Standard — Microbiology of the food chain — Horizontal method for the enumeration of psychrotrophic microorganisms, Second Edition KS ISO 18593:2018 Kenya Standard — Microbiology of the food chain — Horizontal methods for surface sampling, Second Edition KS ISO 16140-1:2016 Kenya Standard — Microbiology of the food chain — Method validation — Part 1: Vocabulary, Second Edition KS ISO 16140-2:2016 Kenya Standard — Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method, Second Edition KS EAS 827:2022 Kenya Standard — Fresh and frozen whole fin fish — Specification, Second Edition KS EAS 830:2022 Kenya Standard — Frozen fish sticks (fish fingers), fish portions and fish fillets - Breaded or in batter — Specification, Second Edition KS EAS 831:2022 Kenya Standard — Frozen fish fillets — Specification, Second Edition KS EAS 832:2022 Kenya Standard — Fish industry — Operational cleanliness and hygiene — Guidelines, Second Edition KS EAS 833:2022 Kenya Standard — Processing and handling of dried fish and fish products — Code of practice, Second Edition KS EAS 834:2022 Kenya Standard — Processing and handling of salted fish and fish products — Code of practice, Second Edition Agriculture KS ISO 11132:2021 Kenya Standard — Sensory analysis — Methodology — Guidelines for the measurement of the performance of a quantitative descriptive sensory panel, Second Edition KS ISO 23637:2021 Kenya Standard — Cereals — Determination of cadmium content by graphite furnace atomic absorption spectrometry with diluted nitric acid extraction, First Edition KS 2958-1:2022 Kenya Standard — Nuts and oil crops industry — Code of practice —Part 1: Tree nuts, First Edition KS EAS 110:2022 Kenya Standard — Cigarettes — Specification, First Edition 6810 6810 KS EAS 47:2022 Kenya Standard — Fresh papaya (pawpaw) — Specification, Second Edition KS EAS 56:2022 Kenya Standard — Fresh mushrooms — Specification, Second Edition KS EAS 330:2022 Kenya Standard — Citrus — Specification, Second Edition KS EAS 286-1:2022 Kenya Standard — Cut flowers and cut foliage — Specification — Part 1: Fresh cut flowers, Second Edition KS EAS 332:2022 Kenya Standard — Fresh chili peppers — Specification, Second Edition KS EAS 741:2022 Kenya Standard — Cassava wheat composite flour — Specification, Second Edition KS EAS 742:2022 Kenya Standard — Food grade cassava starch — Specification, Second Edition KS EAS 1040:2022 Kenya Standard — Dried cassava pellets — Specification, First Edition KS EAS 1041:2022 Kenya Standard — Dried ground cassava leaves — Specification, First Edition Chemical KS ISO 5667-4:2016 Kenya Standard — Water quality — Sampling — Part 4: Guidance on sampling from lakes, natural and man-made, Second Edition KS ISO 5667-5:2006 Kenya Standard — Water quality — Sampling — Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems, Second Edition KS ISO 5667-11:2009 Kenya Standard — Water quality – Sampling — Part 11: Guidance on sampling of Ground waters, Second Edition KS ISO 5667-12:2017 Kenya Standard — Water quality — Sampling — Part 12: Guidance on Sampling of bottom sediments from rivers, lakes and estuarine areas, Second Edition KS ISO 5667-13:2011 Kenya Standard — Water quality — Sampling — Part 13: Guidance on sampling of sludges, Second Edition KS ISO 5667-14:2014 Kenya Standard — Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling, Second Edition KS ISO 5667-15:2009 Kenya Standard — Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples, Second Edition KS ISO 5667-16:2017 Kenya Standard — Water quality — Sampling — Part 16: Guidance on biotesting of samples, Second Edition KS ISO 5667-17:2008 Kenya Standard — Water quality — Sampling — Part 17: Guidance on sampling of bulk suspended solids, Second Edition KS ISO 7899 - 2:2000 Kenya Standard — Water quality — Detection and enumeration of intestinal enterococci — Part 2: Membrane filtration method, Second Edition KS ISO 9509:2006 Kenya Standard — Water quality — Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms, Second Edition KS ISO 9562:2004 Kenya Standard — Water quality — Determination of adsorbable organically bound halogens (AOX), Third Edition KS ISO 10523:2008 Kenya Standard — Water quality — Determination of pH, Second Edition KS ISO 11262:2011 Kenya Standard — Soil quality — Determination of total cyanide, Second Edition KS ISO 11464:2006 Kenya Standard — Soil quality — Pretreatment of samples for physico-chemical analysis, Second Edition KS ISO 15009:2016 Kenya Standard — Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons — Purge- and-trap method with thermal desorption, Third Edition KS ISO 10390:2021 Kenya Standard — Soil, treated biowaste and sludge – Determination of pH KS ISO 32100:2018 Kenya Standard — Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method, Second Edition KS ISO 25518:2021 Kenya Standard — Single-use rubber gloves for general applications — Specification, Second Edition KS ISO 24999:2008 Kenya Standard — Flexible cellular polymeric materials — Determination of fatigue by a constant-strain procedure, First Edition KS ISO 23641:2021 Kenya Standard — Determination of antibacterial effectiveness, First Edition KS ISO 22941:2021 Kenya Standard — Rubber sheets for livestock — Dairy cattle — Specification, First Edition KS ISO 22843:2020 Kenya Standard — Rubber bands — General requirements and test methods, First Edition KS ISO 20437:2017 Kenya Standard — Natural rubber latex cleanroom gloves — Specification, First Edition KS ISO 23464:2020 Kenya Standard — Nitrile cleanroom gloves — Specification, First Edition KS ISO 20819-1:2020 Plastics — Wood-plastic recycled composites (WPRC) — Part 1: Specification, First Edition KS ISO 8789:2020 Kenya Standard — Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification, Fourth Edition KS ISO 13775-1:2021 Kenya Standard — Thermoplastic tubing and hoses for automotive use part 1: Non fuel application, Third edition KS ISO 21583:2020 Kenya Standard — Firework displays — General guidance, First Edition KS ISO 4266-1:2002 Kenya Standard — Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks, First Edition KS ISO 4266-2:2002 Kenya Standard — Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels, First Edition KS ISO 4266-3:2002 Kenya Standard — Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pressurized storage tanks (non-refrigerated), First Edition KS ISO 4266-4:2002 Kenya Standard — Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks, First Edition KS ISO 4266-5:2002 Kenya Standard — Petroleum and liquid petroleum products — Measurement of level 26th August, 2022 THE KENYA GAZETTE and temperature in storage tanks by automatic methods — Part 5: Measurement of temperature in marine vessels, First Edition KS ISO 4266-6:2002 Kenya Standard — Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated), First Edition KS ISO 8222:2020 Kenya Standard — Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials), First Edition KS ISO 8222:2020 Amd 1:2022 Kenya Standard — Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) — AMENDMENT 1, Correction of two typographical errors, First Edition KS ISO 20823:2003 Kenya Standard — Petroleum and related products — Determination of the flammability characteristics of fluids in contact with hot surfaces — Manifold ignition test, First Edition KS ISO/TR 19441:2018 Kenya Standard — Petroleum products — Density versus temperature relationships of current fuels, biofuels and biofuel components, First Edition KS ISO 16591:2010 Kenya Standard — Petroleum products — Determination of sulfur content — Oxidative microcoulometry method, First Edition KS ISO/TR 29662:2020 Kenya Standard — Petroleum products and other liquids — Guidance for flash point and combustibility testing, First Edition KS ISO 13501:2011 Kenya Standard — Petroleum and natural gas industries — Drilling fluids — Processing equipment evaluation, First Edition KS ISO 6246:2017/Amd1:2019 Kenya Standard — Petroleum products — Gum content of fuels — Jet evaporation method, AMENDMENT 1, Purity requirement for n-heptane, First Edition KS 2227:2022 Kenya Standard — Petroleum and petroleum products —Automotive biodiesel fuel — Specification, Second Edition KS 91:2022 Kenya Standard — Petroleum and petroleum products—Liquefied Petroleum Gas (LPG) — Specification, Second Edition KS 2953:2022 Kenya Standard — Petroleum and petroleum products — Automotive B5 Biodiesel Fuel — Specification, First Edition KPAS 2950:2022 Kenya Standard — Cosmetics — Petroleum jelly for cosmetic use — Specification Leather and Textile KS 1113-5:2022 Kenya Standard — Kenya Standard — Staple spun yarns — Specification — Part 5: Polyester Yarns, First Edition KS 543-2:2022 Kenya Standard — Embroidery threads — Specification — Part 2: Polyester filament embroidery threads, First Edition KS 779-2:2022 Kenya Standard — Carpets — Specification — Part 2: Sisal carpets, Second Edition KS 414:2022 Kenya Standard — School wear for boys and girls — Specification, Second Edition Engineering KS ISO 1496-2:2018 Kenya Standard — Series 1 Freight containers — Specification and testing Part 2: Thermal containers, Second Edition KS ISO 1496-3:2019 Kenya Standard — Series 1 Freight containers — Specification and testing Part 3: Tank containers for liquids gases and pressurized dry bulk, Second Edition KS ISO 1496-5:2018 Kenya Standard — Series 1 Freight containers — Specification and testing Part 5: Platform and platform based containers, Second Edition KS ISO 15069:2018 Kenya Standard — Series 1 Freight containers — Handling and securing rationale for ISO 3874 Annex A, Second Edition KS ISO/TR 15070:1996 Kenya Standard — Series 1 Freight containers — Rationale for structural test criteria, Second Edition KS ISO 3807-2013 Kenya Standard — Gas cylinders — Acetylene cylinders — Basic requirements and type testing, Second Edition KS ISO 6621-1:2018 Kenya Standard — Internal combustion engines — Piston rings — Part 1: Vocabulary, Second Edition KS ISO 6621-5:2020 Kenya Standard — Internal combustion engines — Piston rings — Part 5: Quality Requirements, Second Edition KS ISO/TR 8357:1996 Kenya Standard — Road vehicles — Instructions for the implementation of the assignment of World Manufacturer Identifier (WMI) codes for Vehicle Identification Number (VIN) systems and for world parts manufacturer, First Edition KS ISO 15500-1:2015 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 1: General requirements and requirements, Second Edition KS ISO 6621-3:2021 Kenya Standard — Internal combustion engines — Piston rings — Part 3: Material Specifications, Second Edition KS ISO 6627:2022 Kenya Standard — Internal combustion engines — Piston rings — Expander/rail oil-control rings, Second Edition KS ISO 15500-15:2015 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 15: Gas tight housing and ventilation hose, Second Edition KS ISO 6624-1:2017 Kenya Standard — Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron, Second Edition KS ISO 6624-3:2017 Kenya Standard — Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel, Second Edition KS ISO 6621-2:2020 Kenya Standard — Internal combustion engines — Piston rings — Part 2: Inspection measuring principles, Second Edition KS ISO 6621-4:2015 Kenya Standard — Internal combustion engines — Piston rings — Part 4: General specifications, Second Edition KS ISO 6622-1:2021 Kenya Standard — Internal combustion engines — Piston rings — Part 1: Rectangular rings made of cast iron, Second Edition KS ISO 6622-2:2013 Kenya Standard — Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel, Second Edition KS ISO 6624-2:2016 Kenya Standard — Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron, Second Edition 6812 6812 KS ISO 6624-4:2016 Kenya Standard — Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel, Second Edition KS ISO 6626-2:2013 Kenya Standard — Internal combustion engines — Piston rings — Part 2: Coil spring loaded oil control rings of narrow width made of cast iron, Second Edition KS ISO 18669-2:2020 Kenya Standard — Internal combustion engines — Piston pins — Part 2: Inspection measuring principles, Second Edition KS ISO 6623:2013 Kenya Standard — Internal combustion engines — Piston rings scraper rings made of cast iron, Second Edition KS ISO 15500-20:2015 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 20: Rigid fuel line in material other than stainless steel, Second Edition KS ISO 8936:2017 Kenya Standard — Awnings for leisure accommodation vehicles — Requirements and test methods, Second Edition KS ISO 4548-9:2008 Kenya Standard — Methods of test for full flow lubricating oil filters for internal combustion engines — Part 9: Inlet and outlet anti drain valve tests, First Edition KS ISO 14722:1998 Amd 1:2011 Kenya Standard — Moped and moped rider kinematics — Vocabulary, AMENDMENT 1, First Edition KS ISO 15500-14:2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 14: Excess flow valve, Second Edition KS ISO 15500-16:2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 16: Rigid fuel line in stainless, Steel Second Edition KS ISO 15500-18:2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 18: Filter, Second Edition KS ISO 15500-19:2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 19: Fittings, Second Edition KS ISO 15500-2:2016 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 2: Performance and general test methods, Second Edition KS ISO 15500-3:2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 5: Manual cylinder valve, Second Edition KS ISO 15500-4-2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 3: Check valve, Second Edition KS ISO 15500-5:2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 3: Check valve, Second Edition KS ISO 15500-6:2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 6: Automatic valve, Second Edition KS ISO 15500-9:2020 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 9: Pressure regulator, Second Edition KS ISO 23274-2:2021 Kenya Standard — Hybrid electric road vehicles — Exhaust emissions and fuel consumption measurements — Part 2: Externally chargeable vehicles, Second Edition KS ISO 4548-6:2021 Kenya Standard — Methods of test for full flow lubricating oil filters for internal combustion engines — Part 6: Static burst pressure test, Second Edition KS ISO 4548-7:2012 Kenya Standard — Methods of test for full flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test, First Edition KS ISO 15500-12:2015 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 12: Pressure Relief Valve (PRV), Second Edition KS ISO 17479:2013 Amd 1:2020 Kenya Standard — Motorcycles — Measurement Methods for gaseous exhaust emissions during inspection or maintenance, AMENDMENT 1, First Edition KS ISO 23274-1:2019 Kenya Standard — Hybrid electric road vehicles — Exhaust emissions and fuel consumption measurements — Part 1: Non- externally chargeable vehicles, Second Edition KS ISO 4548-5:2020 Kenya Standard — Methods of test for full flow lubricating oil filters for internal combustion engines — Part 5: Test for cold start simulation and hydraulic pulse durability, Second Edition KS ISO 17409:2020 Kenya Standard — Electrically propelled road vehicles — Connection to an external electric power supply — Safety requirements, Second Edition KS ISO 28981:2009A MD 1:2015 Kenya Standard — Mopeds — Methods for setting the running resistance on a chassis dynamometer, AMENDMENT 1, First Edition KS ISO 6727:2021 Kenya Standard — Road Vehicles — Motorcycles symbols for controls indicators and tell tales, Second Edition KS ISO 9021:2020 Kenya Standard — Motorcycles — Controls types positions and functions, Second Edition KS ISO 12353-1:2020 Kenya Standard — Road vehicles — Traffic accident analysis — Part 1: Vocabulary, Second Edition KS ISO 13325:2019 Kenya Standard — Tyres — Coast by methods for measurement of tyre to road sound emission, Second Edition KS ISO 15005:2017 Kenya Standard — Road vehicles — Ergonomic aspects of transport information and control systems dialogue management principles and compliance procedures, Second Edition KS ISO 15037-1:2019 Kenya Standard — Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars, Second Edition KS ISO 1585:2020 Kenya Standard — Road vehicles — Engine test code net power, Second Edition KS ISO 1728:2006 Kenya Standard — Road Vehicles — Pneumatic Braking Connections Between Motor Vehicles and Towed Vehicles Interchangeability, First Edition KS ISO 2575:2021 Kenya Standard — Road Vehicles — Symbols for Controls Indicators and Tell Tales, Second Edition KS ISO 3780:2009 Cor 1:2010 Kenya Standard — Road Vehicles — World manufacturer identifier (WMI) code, Technical Corringedum 1, First Edition KS ISO 9413:2019 Kenya Standard — Tyre Valves — Dimensions and Designation, Second Edition 26th August, 2022 THE KENYA GAZETTE KS ISO 18669-1:2021 Internal combustion engines — Piston pins — Part 1: General specifications, Second Edition KS ISO 12944-1:2017 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction, Second Edition KS ISO 12944-2:2017 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments, Second Edition KS ISO 12944-3:2017 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations, Second Edition KS ISO 12944-4:2017 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation, Second Edition KS ISO 12944-5:2019 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems, Second Edition KS ISO 12944-6:2018 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods, Second Edition KS ISO 12944-7:2017 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work, Second Edition KS ISO 12944-8:2017 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance, Second Edition KS ISO 12944-9:2018 Kenya Standard — Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures, Second Edition KS ISO 15630-1:2019 Kenya Standard — Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, rods and wire. Third Edition KS ISO 15630-2:2019 Kenya Standard — Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric and lattice girders, Third Edition KS ISO 15630-3:2019 Kenya Standard — Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel, Third Edition KS 2962:2022 Kenya Standard — Corrugated sheet steel beams for highway guardrail — Specification First Edition KS EAS 489:2008 Kenya Standard — Concrete poles for telephone, power and lighting purposes — Specification, First Edition KS 829:2022 Kenya Standard —Precast concrete channels, edgings and quadrants — Specification, Second Edition KS 2965:2022 Kenya Standard — Siting of Liquefied Petroleum Gas (LPG) automotive retail outlets — Requirements, First Edition KS 2963-1:2022 Kenya Standard — Liquefied petroleum gas storage installations — Part 1: Domestic, commercial and industrial bulk storage installations (Reticulation), First Edition KS 2960:2022 Kenya Standard — Razor wire — Specification, First Edition Electrotechnical KS IEC 60952-1:2013 Kenya Standard — Aircraft batteries — Part 1: General test requirements and performance levels, Second Edition KS IEC 60952-2:2013 Kenya Standard — Aircraft batteries — Part 2: Design and construction requirements, Second Edition KS IEC 60952-3:2013 Kenya Standard — Aircraft batteries — Part 3: Product specification and declaration of design and performance (DDP), Second Edition KS IEC 62040-1:2017+AMD 1:2021 Kenya Standard — Uninterruptible power systems (UPS) — Part 1: Safety requirements, First Edition KS IEC 62040-2:2016 Kenya Standard — Uninterruptible power systems (UPS) — Part 2: Electromagnetic compatibility (EMC) requirements, Second Edition KS IEC 62040-3:2021 Kenya Standard — Uninterruptible power systems (UPS) — Part 3: Method of specifying the performance and test requirements, Second Edition KS IEC/TS 61044:2021 Kenya Standard — Opportunity charging of lead-acid traction batteries, Second Edition KS IEC 62368-1:2018 Kenya Standard — Audio/video, information and communication technology equipment — Part 1: Safety requirements, First Edition KS IEC/TR 62368-2:2019 Kenya Standard — Audio/video, information and communication technology equipment — Part 2: Explanatory information related to IEC 62368-1:2018, First Edition KS IEC 62368-3:2019 Kenya Standard — Audio/video, information and communication technology equipment — Part 3: Safety aspects for DC power transfer through communication cables and ports, First Edition KS CISPR 15:2018 Kenya Standard — Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment, Second Edition KS CISPR 16-1-1:2019 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-1: Radio disturbance and immunity measuring apparatus — Measuring apparatus, Second Edition KS CISPR 16-1-2:2014+AMD 1:2017 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-2: Radio disturbance and immunity measuring apparatus — Coupling devices for conducted disturbance measurements, Second Edition KS CISPR 16-1-3:2004+AMD 1:2016+AMD 2:2020 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-3: Radio disturbance and immunity measuring apparatus — Ancillary equipment — Disturbance power, First Edition KS CISPR 16-1-4:2019+AMD 1:2020 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-4: Radio disturbance and immunity measuring apparatus — Antennas and test sites for radiated disturbance measurements, First Edition KS CISPR 16-1-5:2014+AMD 1:2016 Kenya Standard — Specification for radio disturbance and 6814 6814 immunity measuring apparatus and methods — Part 1-5: Radio disturbance and immunity measuring apparatus — Antenna calibration sites and reference test sites for 5 MHz to 18 GHz, Second Edition KS CISPR 16-2-1:2014+AMD 1:2017 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-1: Methods of measurement of disturbances and immunity — Conducted disturbance measurements, Second Edition KS CISPR 16-2-2:2010 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-2: Methods of measurement of disturbances and immunity — Measurement of disturbance power, Second Edition KS CISPR 16-2-3:2016+AMD 1:2019 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-3: Methods of measurement of disturbances and immunity — Radiated disturbance measurements, Second Edition KS CISPR 16-4-2:2011+AMD 1:2014+AMD 2:2018 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 4-2: Uncertainties, statistics and limit modelling — Measurement instrumentation uncertainty, Second Edition KS IEC 60050-161:1990 Kenya Standard — International Electrotechnical Vocabulary (IEV) — Part 161: Electromagnetic compatibility, First Edition KS IEC 60065:2014 Kenya Standard — Audio, video and similar electronic apparatus — Safety requirements, Second Edition KS IEC 60098:2020 Kenya Standard — Analogue audio disk records and reproducing equipment, Second Edition KS IEC 60268-3:2018 Kenya Standard — Sound system equipment — Part 3: Amplifiers, Second Edition KS IEC 60268-4:2018 Kenya Standard — Sound system equipment — Part 4: Microphones, Second Edition KS IEC 60268-5:2003+AMD 1:2007 Kenya Standard — Sound system equipment — Part 5: Loudspeakers, Second Edition KS IEC 60268-7:2010+AMD 1:2020 Kenya Standard — Sound system equipment — Part 7: Headphones and earphones, Second Edition KS IEC 60268-16:2020 Kenya Standard — Sound system equipment — Part 16: Objective rating of speech intelligibility by speech transmission index, Second Edition KS IEC 60958-1:2021 Kenya Standard — Digital audio interface — Part 1: General, Second Edition KS IEC 60958-3:2021 Kenya Standard —  Digital audio interface — Part 3: Consumer applications, Second Edition KS IEC 61883-6:2014 Kenya Standard — Consumer audio/video equipment — Digital interface - Part 6: Audio and music data transmission protocol, Second Edition KS IEC 61883-8:2008+AMD 1:2014 Kenya Standard — Consumer audio/video equipment — Digital interface — Part 8: Transmission of ITU-R BT.601 style digital video data, Second Edition KS IEC 62104:2015 Kenya Standard — Characteristics of DAB receivers, Second Edition KS IEC 60094-3:1979+AMD 2:1988 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape, Second Edition KS IEC 60268-12:1987+AMD 1:1991 Kenya Standard — Sound system equipment — Part 12: Application of connectors for Broadcast and similar use, Second Edition KS IEC 60774-1:1994 Kenya Standard — Helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type VHS — Part 1: VHS and compact VHS video cassette system, First Edition KS IEC 60958-4-1:2016 Kenya Standard — Digital audio interface — Part 4-1: Professional applications - Audio content, First Edition KS IEC 60958-4-2:2016, Digital audio interface — Part 4-2: Professional applications — Metadata and subcode, First Edition KS IEC 60958-4-4:2016 Kenya Standard — Digital audio interface — Part 4-4: Professional applications - Physical and electrical parameters, First Edition KS IEC 62634:2015 Kenya Standard — Radio data system (RDS) — Receiver products and characteristics - Methods of measurement, First Edition KS CISPR/TR 16-4-4:2020 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 4-4: Uncertainties, statistics and limit modelling — Statistics of complaints and a model for the calculation of limits for the protection of radio services, First Edition KS CISPR 25:2021 Kenya Standard — Vehicles, boats and internal combustion engines — Radio disturbance characteristics — Limits and methods of measurement for the protection of on-board receivers, First Edition KS ISO 19642-1:2019 Kenya Standard — Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines, First Edition KS ISO 19642-2:2019 Kenya Standard — Road vehicles — Automotive cables — Part 2: Test methods, First Edition KS ISO 19642-3:2019 Kenya Standard — Road vehicles — Automotive cables — Part 3: Dimensions and requirements for 30 V A.C. or 60 V D.C. single core copper conductor cables, First Edition KS ISO 19642-4:2019 Kenya Standard — Road vehicles — Automotive cables — Part 4: Dimensions and requirements for 30 V A.C. and 60 V D.C. single core aluminum conductor cables, First Edition KS ISO 19642-5:2019 Kenya Standard — Road vehicles — Automotive cables — Part 5: Dimensions and requirements for 600 V A.C. Or 900 V D.C. and 1 000 V A.C. or 1 500 V D.C. Single core copper conductor cables, First Edition KS ISO 19642-6:2019 Kenya Standard — Road vehicles — Automotive cables — Part 6: Dimensions and requirements for 600 V A.C. or 900 V D.C. And 1 000 V A.C. or 1 500 V D.C. single core aluminium conductor cables, First Edition KS ISO 19642-7:2019 Kenya Standard — Road vehicles — Automotive cables — Part 7: Dimensions and requirements for 30 V A.C. or 60 V D.C. round, sheathed, screened or unscreened multi or single core copper conductor cables, First Edition KS ISO 19642-8:2019 Kenya Standard — Road vehicles — Automotive cables — Part 8: Dimensions and requirements for 30 V A.C. or 60 V D.C. round, 26th August, 2022 THE KENYA GAZETTE sheathed, screened or unscreened multi or single core aluminium conductor cables, First Edition KS ISO 19642-9:2019 Kenya Standard — Road vehicles — Automotive cables — Part 9: Dimensions and requirements for 600 V A.C. or 900 V D.C. And 1 000 V A.C. or 1 500 V D.C. round, sheathed, screened or unscreened multi or single core copper conductor cables, First Edition KS ISO 19642-10:2019 Kenya Standard — Road vehicles — Automotive cables — Part 10: Dimensions and requirements for 600 V A.C. or 900 V D.C. and 1 000 V A.C. or 1 500 V D.C. round, sheathed, screened or unscreened multi or single core aluminum conductor cables, First Edition KS IEC 60332-3-21:2018 Kenya Standard — Tests on electric and optical fibre cables under fire conditions — Part 3-21: Test for vertical flame spread of vertically mounted bunched wires or cables — Category A F/R, Second Edition KS IEC TR 60601-4-1:2017 Kenya Standard — Medical electrical equipment — Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomy, First Edition KS IEC 60601-2-19:2020 Kenya Standard — Medical electrical equipment — Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators, First Edition KS IEC 60601-2-20:2020 Kenya Standard — Medical electrical equipment — Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators, First Edition KS IEC/TR 60878:2015 Kenya Standard — Graphical symbols for electrical equipment in medical practice, First Edition KS IEC 60601-2-4:2010 +AMD 1:2018 Kenya Standard — Medical electrical equipment — Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators, First Edition KS IEC 60601-2-25:2011 Kenya Standard — Medical electrical equipment — Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs, First Edition KS IEC 60335-2-67:2021 Kenya Standard — Household and similar electrical appliance — Safety — Part 2-67: Particular requirements for floor treatment machines, for commercial use, Second Edition KS IEC 60079-10-1:2020 Kenya Standard — Explosive atmospheres — Part 10-1: Classification of areas — Explosive gas atmospheres, Second Edition KS CISPR 14-1:2020 Kenya Standard — Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 1: Emission, Second Edition KS CISPR 14-2:2020 Kenya Standard — Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 2: Immunity - Product family standard, Second Edition KS IEC/TR 61000-4-1:2016 Kenya Standard — Electromagnetic compatibility (EMC) — Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series, Second Edition KS IEC 61000-4-2:2008 Kenya Standard — Electromagnetic compatibility (EMC) — Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test, Second Edition KS IEC 61000-4-3:2020 Kenya Standard — Electromagnetic compatibility (EMC) — Part 4-3: Testing and measurement techniques — Radiated, radio- frequency, electromagnetic field immunity test, Second Edition KS IEC 61000-4-4:2012 Kenya Standard — Electromagnetic compatibility (EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test, Second Edition KS IEC 61000-4-5:2014+AMD 1:2017 Kenya Standard — Electromagnetic compatibility (EMC) — Part 4- 5: Testing and measurement techniques — Surge immunity test, Second Edition KS IEC 61000-4-6:2013 Kenya Standard — Electromagnetic compatibility (EMC) — Part 4-6: Testing and measurement techniques — Immunity to conducted disturbances, induced by radio- frequency fields, Second Edition KS IEC/TS 62370:2004+AMD 1:2017 Kenya Standard — Electroacoustics — Instruments for the measurement of sound intensity — Electromagnetic and electrostatic compatibility requirements and test procedures, Second Edition KS IEC 60947-1:2020 Kenya Standard — Low-voltage switchgear and controlgear — Part 1: General rules, Second edition KS IEC 60947-2:2019 Kenya Standard — Low-voltage switchgear and controlgear — Part 2: Circuit-breakers, Second Edition KS IEC 60947-3:2020 Kenya Standard — Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse- combination units, Second Edition KS IEC 60947-4-1:2018 Kenya Standard — Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters, Second Edition KS IEC 60947-4-2:2020 Kenya Standard — Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — Semiconductor motor controllers, starters and soft-starters, Second Edition KS IEC 60947-4-3:2020 Kenya Standard — Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters — Semiconductor controllers and semiconductor contactors for non-motor loads, Second Edition KS IEC 60947-5-1:2016 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices, Second Edition KS IEC 60947-5-2:2016 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches, Second Edition KS IEC 60947-5-3:2013 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behavior under fault conditions (PDDB), Second Edition KS IEC 60947-5-4:2019 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-4: Control circuit devices and switching elements — Method of assessing the performance of low-energy contacts — Special tests, Second Edition 6816 6816 KS IEC 60947-5-5:2016 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function, Second Edition KS IEC 60947-5-8:2020 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-8: Control circuit devices and switching elements — Three- position enabling switches, Second Edition KS IEC 60947-6-1:2021 Kenya Standard — Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Transfer switching equipment, Second Edition KS IEC 60947-6-2:2020 Kenya Standard — Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices (or equipment) (CPS), Second Edition KS IEC 60947-7-1:2009 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors, Second Edition KS IEC 60947-7-2:2009 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors, Second Edition KS IEC 60947-7-3:2009 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-3: Ancillary equipment — Safety requirements for fuse terminal blocks, Second Edition KS IEC 60947-7-4:2019 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-4: Ancillary equipment — PCB terminal blocks for copper conductors, First Edition KS IEC 60947-8:2021 Kenya Standard — Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines, Second Edition KS IEC 60947-9-1:2019 Kenya Standard — Low-voltage switchgear and controlgear — Part 9-1: Active arc-fault mitigation systems — Arc quenching devices, First Edition KS IEC 60947-9-2:2021 Kenya Standard — Low-voltage switchgear and controlgear — Part 9-2: Active arc-fault mitigation systems — Optical-based internal arc-detection and mitigation devices, First Edition KS IEC 61439-1:2020 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 1: General rules, Second Edition KS IEC 61439-2:2020 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies, Second Edition KS IEC 61439-7:2018 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging station, First Edition KS IEC 62271-100:2021 Kenya Standard — High-voltage switchgear and controlgear — Part 100: Alternating-current circuit-breakers, First Edition KS IEC 62271-101:2021 Kenya Standard — High-voltage switchgear and controlgear — Part 101: Synthetic testing, First Edition KS IEC 62271-102:2018 Kenya Standard — High-voltage switchgear and controlgear — Part 102: Alternating current disconnectors and earthing switches, First Edition KS IEC 62271-103:2021 Kenya Standard — High-voltage switchgear and controlgear — Part 103: Switches for rated voltages above 1 kV up to and including 52 kV, First Edition KS IEC 62271-104:2020 Kenya Standard — High-voltage switchgear and controlgear — Part 104: Alternating current switches for rated voltages higher than 52 kV, First Edition KS IEC 62271-105:2021 Kenya Standard — High-voltage switchgear and controlgear — Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV, First Edition KS IEC 62271-107:2019 Kenya Standard — High-voltage switchgear and controlgear — Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV, First Edition KS IEC 62271-108:2020 Kenya Standard — High-voltage switchgear and controlgear — Part 108: High-voltage alternating current disconnecting circuit- breakers for rated voltages above 52 kV, First Edition KS IEC 62271-200:2021 Kenya Standard — High-voltage switchgear and controlgear — Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV, First Edition KS IEC 60076-3:2018 Kenya Standard — Power transformers — Part 3: Insulation levels, dielectric tests and external clearances in air, Second edition KS IEC 60076-5:2006 Kenya Standard — Power transformers — Part 6: Ability to withstand short circuit, First Edition KS IEC 60076-13:2006 Kenya Standard — Power transformers — Part 13: Self-protected liquid-filled transformers, First Edition KS IEC 60076-15:2015 Kenya Standard — Power transformers — Part 15: Gas-filled power transformers, Second Edition KS IEC 62208:2011 Kenya Standard — Empty enclosures for low- voltage switchgear and controlgear assemblies — General requirements, Second Edition KS IEC 60034-1:2022 Kenya Standard — Rotating electrical machines — Part 1: Rating and performance, Second Edition KS IEC 60034-8:2014 Kenya Standard — Rotating electrical machines — Part 8: Terminal markings and direction of rotation, Second Edition KS IEC 60204-31:2013 Kenya Standard — Safety of machinery - Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems, First Edition KS IEC 60204-33:2009 Kenya Standard — Safety of machinery — Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment, First Edition KS IEC 60099-6:2019 Kenya Standard — Surge arresters — Part 6: Surge arresters containing both series and parallel gapped structures — System voltage of 52 kV and less, Second Edition KS IEC 60099-8:2017 Kenya Standard — Surge arresters — Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV, First Edition KS IEC 60269-1:2014 Kenya Standard — Low-voltage fuses — Part 1: General requirement, First Edition 26th August, 2022 THE KENYA GAZETTE KS IEC 60269-2:2016 Kenya Standard — Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Examples of standardized systems of fuses A to K, Second Edition KS IEC 60269-3:2019 Kenya Standard — Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) — Examples of standardized systems of fuses A to F, Second Edition KS IEC 60269-4:2016 Kenya Standard — Low-voltage fuses — Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices, Second Edition KS IEC 62056-3-1:2021 Kenya Standard — Electricity metering data exchange — The DLMS/COSEM suite — Part 3-1: Use of local area networks on twisted pair with carrier signalling, Second Edition KS IEC 62056-6-1:2017 Kenya Standard — Electricity metering data exchange — The DLMS/COSEM suite — Part 6-1: Object Identification System (OBIS), Second Edition KS IEC 61643-12:2020 Kenya Standard — Low-voltage surge protective devices — Part 12: Surge protective devices connected to low-voltage power systems — Selection and application principles, First Edition KS IEC 61643-21:2012 Kenya Standard — Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods, Second Edition KS IEC 61643-31:2018 Kenya Standard — Low-voltage surge protective devices — Part 31: Requirements and test methods for SPDs for photovoltaic installations, First Edition KS IEC 61643-331:2020 Kenya Standard — Components for low- voltage surge protection — Part 331: Performance requirements and test methods for metal oxide varistors (MOV), First Edition KS IEC 61558-2-6:2021 Kenya Standard — Safety of transformers, reactors, power supply units and combinations thereof — Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general applications, Second Edition KS IEC 61558-2-9:2010 Kenya Standard — Safety of transformers, reactors, power supply units and combinations thereof — Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps, First Edition KS IEC 61558-2-12:2011 Kenya Standard — Safety of transformers, reactors, power supply units and combinations thereof — Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage, First Edition KS IEC 61558-2-16:2021 Kenya Standard — Safety of transformers, reactors, power supply units and combinations thereof — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications, Second Edition KS IEC 61558-2-20:2010 Kenya Standard — Safety of transformers, reactors, power supply units and combinations thereof — Part 2-20: Particular requirements and tests for small reactors, Second Edition KS IEC 61869-2:2012 Kenya Standard — Instrument transformers — Part 2: Additional requirements for current transformers, First Edition KS IEC 61869-3:2011 Kenya Standard — Instrument transformers — Part 3: Additional requirements for inductive voltage transformers, First Edition KS IEC 61869-4:2013 Kenya Standard — Instrument transformers — Part 4: Additional requirements for combined transformers, First Edition KS IEC 61869-5:2011 Kenya Standard — Instrument transformers — Part 5: Additional requirements for capacitor voltage transformers, First Edition KS IEC 60715:2017 Kenya Standard — Dimensions of low-voltage switchgear and controlgear — Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories, Second Edition KS IEC 60127-1:2015 Kenya Standard — Miniature fuses — Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links, Second Edition KS IEC 60127-2:2020 Kenya Standard — Miniature fuses — Part 2: Definitions for Cartridge fuse-links, Second Edition KS IEC 60127-3:2020 Kenya Standard — Miniature fuses — Part 3: Sub-miniature fuse-links, Second Edition KS IEC 62351-4:2020 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 4: Profiles including MMS and derivatives, First Edition KS IEC 62351-6:2020 Kenya Standard — Power systems management and associated information exchange - Data and communications security — Part 6: Security for IEC 61850, First Edition KS IEC 62351-7:2017 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 7: Network and System Management (NSM) data object models, First Edition KS IEC 62351-8:2020 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 8: Role- based access control for power system management, First Edition KS ISO 50003:2021 Kenya Standard — Energy management systems — Requirements for bodies providing audit and certification of energy management systems, Second Edition KS ISO 50004:2020 Kenya Standard — Energy management systems — Guidance for the implementation, maintenance and improvement of an ISO 50001 energy management system, Second Edition KS ISO 50005:2021 Kenya Standard — Energy management systems — Guidelines for a phased implementation, First Edition KS ISO 50009:2021 Kenya Standard — Energy management systems — Guidance for implementing a common energy management system in multiple organizations, First Edition KS IWA 33-1:2019 Kenya Standard — Technical guidelines for the development of small hydropower plants — Part 1: Vocabulary, First Edition KS IWA 33-2:2019 Kenya Standard — Technical guidelines for the development of small hydropower plants — Part 2: Site selection planning, First Edition 6818 6818 KS IWA 33-3:2021 Kenya Standard — Technical guidelines for the development of small hydropower plants — Part 3: Design principles and requirements, First Edition KS IEC 60545:2021 Kenya Standard — Guidelines for commissioning and operation of hydraulic turbines, pump- turbines and storage pumps, First Edition KS ISO 20816-5:2018 Kenya Standard — Mechanical vibration — Measurement and evaluation of machine vibration — Part 5: Machine sets in hydraulic power generating and pump-storage plants, First Edition KS IEC 63132-1:2020 Kenya Standard — Guidance for installation procedures and tolerances of hydroelectric machines — Part 1: General aspects, First Edition KS IEC 63132-2:2020 Kenya Standard — Guidance for installation procedures and tolerances of hydroelectric machines — Part 2: Vertical generators, First Edition KS IEC 63132-3:2020 Kenya Standard — Guidance for installation procedures and tolerances of hydroelectric machines — Part 3: Vertical Francis turbines or pump-turbines, First Edition KS IEC 63132-4:2020 Kenya Standard — Guidance for installation procedures and tolerances of hydroelectric machines — Part 4: Vertical Kaplan or propeller turbines, First Edition KS IEC 62006:2010 Kenya Standard — Hydraulic machines — Acceptance tests of small hydroelectric installations, First Edition KS IEC 62790:2020 Kenya Standard — Junction boxes for photovoltaic modules — Safety requirements and tests, First Edition KS IEC 62852:2020 Kenya Standard — Connectors for DC- application in photovoltaic systems — Safety requirements and tests, First Edition KS IEC 60904-1:2020 Kenya Standard — Photovoltaic devices — Part 1: Measurement of photovoltaic current- voltage characteristics, Second Edition KS IEC 60904-8:2014 Kenya Standard — Photovoltaic devices — Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device, First Edition KS IEC 61215-1:2021 Kenya Standard — Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements, First Edition KS IEC 61215-1-1:2021 Kenya Standard — Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules, First Edition KS IEC 61215-1-2:2022 Kenya Standard — Terrestrial photovoltaic (PV) modules - Design qualification and type approval — Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules, First Edition KS IEC 61215-1-3:2022 Kenya Standard — Terrestrial photovoltaic (PV) modules - Design qualification and type approval — Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules, First Edition KS IEC 61215-1-4:2022 Kenya Standard — Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules, First Edition KS IEC 61215-2:2021 Kenya Standard — Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 2: Test procedures, First Edition KS IEC 62109-3:2020 Kenya Standard — Safety of power converters for use in photovoltaic power systems — Part 3: Particular requirements for electronic devices in combination with photovoltaic elements, First Edition KS IEC 62116:2014 Kenya Standard — Utility-interconnected photovoltaic inverters — Test procedure of islanding prevention measures, Second Edition KS IEC 61724-1:2021 Kenya Standard — Photovoltaic system performance — Part 1: Monitoring, Second Edition KS ISO 17225-1:2021 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 1: General requirements, Second Edition KS ISO 17225-2:2021 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 2: Graded wood pellets, Second Edition KS ISO 17225-3:2021 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 3: Graded wood briquettes, Second Edition KS ISO 17225-4:2021 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 4: Graded wood chips, Second Edition KS ISO 17225-5:2021 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 5: Graded firewood, Second Edition KS ISO 17225-6:2021 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 6: Graded non-woody pellets, Second Edition KS ISO 17225-7:2021 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 7: Graded non-woody briquettes, Second Edition KS ISO/IEC 20027:2018 Kenya Standard — Information technology — guidelines for slap ten-print finger printture framework, Second Edition KS ISO IEC/TR 29196:2018 Kenya Standard — Information technology — Guidance for biometric enrolment, Second Edition KS ISO/IEC 10373-6:2020 Kenya Standard — Identification cards — Test methods — Part 6: Proximity cards, Second Edition KS ISO/IEC 18013-1:2018 Kenya Standard — Information technology — Personal identification — ISO- compliant driving licence — Part 1: Physical characteristics and basic data set, Second Edition KS ISO/IEC 18328-2:2021 Kenya Standard — Identification cards — ICC-managed devices — Part 2: Physical characteristics and test methods for cards with devices, Second Edition KS ISO/IEC 7816-8:2021 Kenya Standard — Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations, Second Edition KS ISO/IEC 14443-1:2018 Kenya Standard — Cards and security devices for personal identification — Contactless proximity objects — Part 1: Physical characteristics, Second Edition KS ISO/IEC 14443-2:2020 Kenya Standard — Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio frequency power and signal interface, Second Edition 26th August, 2022 THE KENYA GAZETTE KS ISO/IEC 14443-3:2018 Kenya Standard — Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initialization and anti-collision, Second Edition KS ISO/IEC 14443-4:2018 Kenya Standard — Cards and security devices for personal identification — Contactless proximity objects — Part 4: Transmission protocol, Second Edition KS ISO/IEC 7816-9:2017 Kenya Standard — Identification cards — Integrated circuit cards — Part 9: Commands for card management, Second Edition KS ISO IEC 30106-2:2020 Kenya Standard — Information technology — Object oriented BioAPI — Part 2: Java implementation, Second Edition KS ISO/IEC 30106-3:2020 Kenya Standard — Information technology — Object oriented BioAPI — Part 3: C# implementation, Second Edition KS ISO/IEC 16390:2007 Kenya Standard — Information technology — Automatic identification and data capture techniques — Interleaved 2 of 5 bar code symbology specification, Second Edition KS ISO/IEC 15416:2016 Kenya Standard — Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols, Second Edition KS ISO IEC 15417:2007 Kenya Standard — Information technology — Automatic identification and data capture techniques — Code 128 bar code symbology specification, Second Edition KS ISO/IEC 15420:2009 Kenya Standard — Information technology — Automatic identification and data capture techniques — EAN/UPC bar code symbology specification, Second Edition KS ISO/IEC 20933:2019 Kenya Standard — Information technology — Distributed application platforms and services (DAPS) — Framework for distributed real-time access systems, Second Edition KS ISO/IEC 19752:2017 Kenya Standard — Information technology — Office equipment — Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components, Second Edition KS ISO/IEC 19785-3:2020 Kenya Standard — Information technology — Common Biometric Exchange Formats Framework — Part 3: Patron format specifications, Second Edition KS ISO/IEC 14763-2:2019 Kenya Standard — Information technology — Implementation and operation of customer premises cabling — Part 2: Planning and installation, Second Edition KS ISO/IEC 14763-3:2014 Amd 1:2018 Kenya Standard — Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling, AMENDMENT 1, First Edition KS ISO/IEC 11801-3:2017 Kenya Standard — Information technology — Generic cabling for customer premises — Part 3: Industrial premises, First Edition KS ISO/IEC 11801-3:2017 Cor 1:2018 Kenya Standard — Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling, CORRIGENDUM 1, First Edition KS ISO IEC/TS 20000-5:2022 Kenya Standard — Information technology — Service management — Part 5: Implementation guidance for ISO/IEC 20000-1, Second Edition KS ISO IEC/TS 20000-11:2021 Kenya Standard — Information technology — Service management — Part 11: Guidance on the relationship between ISO/IEC 20000-1 and service management frameworks: ITIL, Second Edition KS ISO IEC/IEEE 15026-4:2021 Kenya Standard — Systems and software engineering — Systems and software assurance — Part 4: Assurance in the life cycle, First Edition KS ISO IEC 9075-4:2016 Kenya Standard — Information technology — Database languages — SQL — Part 4: Persistent stored modules (SQL/PSM), Second Edition KS ISO IEC/IEEE 8802-3:2021 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for ethernet, Second Edition KS ISO IEC/IEEE 8802-3:2021 Amd 1:2021 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet, AMENDMENT 1: Physical layer specifications and management parameters for 2.5 Gb/s and 5 Gb/s operation over backplane, First Edition KS ISO IEC/IEEE 8802-3:2021 Amd 2:2021 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for ethernet, AMENDMENT 2: Physical layer and management parameters for power over ethernet over 4 pairs, First Edition KS ISO IEC/IEEE 8802-3:2021 Amd 3:2021 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for ethernet, AMENDMENT 3: Media access control parameters for 50 Gb/s and physical layers and management parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s operation, First Edition KS ISO IEC/IEEE 8802-3:2021 Amd 4:2021 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for ethernet, AMENDMENT 4: Physical layers and management parameters for 50 Gb/s, 200 Gb/s, and 400 Gb/s operation over single‐mode fiber, First Edition KS ISO IEC/IEEE 8802-3:2021 Amd 5 2021 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for ethernet, AMENDMENT 5: Physical layers specifications and management parameters for 10 Mb/s operation and associated power delivery over a single balanced pair of conductors, First Edition KS ISO IEC/IEEE 8802-11:2018 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications, Second Edition KS ISO IEC/IEEE 8802-11:2018/AMD 1:2019 Kenya Standard — Telecommunications and exchange between information technology systems — 6820 6820 Requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications, AMENDMENT 1: Fast initial link setup, First Edition KS ISO IEC/IEEE 8802-11:2018/AMD 2:2019 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications, AMENDMENT 2: Sub 1 GHz License Exempt Operation, First Edition KS ISO IEC/IEEE 8802-11:2018 Amd 4:2020 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications, AMENDMENT 4: Enhancements for transit links within bridged network, First Edition KS ISO IEC/IEEE 8802-11:2018 Amd 5:2020 Kenya Standard — Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications, AMENDMENT 5 — Preassociation discovery, First Edition KS ISO/IEC 6429:1992 Kenya Standard — Information technology — Control functions for coded character sets, First Edition KS 2416-3:2022 Kenya Standard — Information technology — learning, education and training — Part 3: Network components to support eLearning, Second Edition KS IEC 61010-1:2016 Kenya Standard — Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements, First Edition KS IEC 61554:1999 Kenya Standard — Panel mounted equipment — Electrical measuring instruments - Dimensions for panel mounting, First Edition KS IEC 60679-1:2017 Kenya Standard — Piezoelectric, dielectric and electrostatic oscillators of assessed quality — Part 1: Generic specification, First Edition KS IEC 60679-2:1981 Kenya Standard — Quartz crystal controlled oscillators — Part 2: Guide to the use of quartz crystal controlled oscillators, First Edition KS ISO 2178:2016 Kenya Standard — Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method, Second Edition KS ISO 2714:2017 Kenya Standard — Liquid hydrocarbons — Volumetric measurement by displacement meter, Second Edition KS ISO 2715:2017 Kenya Standard — Liquid hydrocarbons — Volumetric measurement by turbine flowmeter, Second Edition Services KS ISO 37106:2021 Kenya Standard — Sustainable cities and communities — Guidance on establishing smart city operating models for sustainable communities, First Edition KS ISO 37155-2:2021 Kenya Standard — Framework for integration and operation of smart community infrastructures — Part 2: Holistic approach and the strategy for development, operation and maintenance of smart community infrastructures, First Edition KS ISO 37163:2020 Kenya Standard — Smart community infrastructures — Smart transportation for parking lot allocation in cities, First Edition KS ISO 37164:2021 Kenya Standard — Smart community infrastructures — Smart transportation using fuel cell light rail transit (FC-LRT), First Edition KS ISO 37165:2020 Kenya Standard — Smart community infrastructures — Guidance on smart transportation with the use of digitally processed payment (d-payment), First Edition KS ISO 37169:2021 Kenya Standard — Smart community infrastructures — Smart transportation by run- through train/bus operation in/between cities, First Edition KS ISO/TR 37171:2020 Kenya Standard — Report of pilot testing on the application of ISO smart community infrastructures standards, First Edition KS ISO 22300:2021 Kenya Standard — Security and resilience — Vocabulary, First Edition KS ISO 22328-1:2020, Security and resilience — Emergency management — Part 1: General guidelines for the implementation of a community-based disaster early warning system, First Edition KS ISO 22329:2021 Kenya Standard — Security and resilience — Emergency management — Guidelines for the use of social media in emergencies, First Edition KS ISO/TS 22332:2021 Kenya Standard — Security and resilience — Business continuity management systems — Guidelines for developing business continuity plans and procedures, First Edition KS ISO 22341:2021 Kenya Standard — Security and resilience — Protective security — Guidelines for crime prevention through environmental design, First Edition KS ISO 22313:2020 Kenya Standard — Security and resilience — Business continuity management systems — Guidance on the use of ISO 22301, First Edition KS ISO 21500:2021 Kenya Standard — Project, programme and portfolio management — Context and concepts, Second Edition KS ISO/IEC GUIDE 50:2014 Kenya Standard — Safety aspects — Guidelines for child safety in standards and other specifications, Second Edition KS ISO 44003:2021 Kenya Standard — Collaborative business relationship management — Guidelines for micro, small and medium-sized enterprises on the implementation of the fundamental principles, First Edition KS ISO 10006:2017 Kenya Standard — Quality management — Guidelines for quality management in projects, Second Edition KS ISO 2859-2:2020 Kenya Standard — Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by Limiting Quality (LQ) for isolated lot inspection, Second Edition KS ISO 2859-4:2020 Kenya Standard — Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of declared quality levels, Second Edition KS ISO 28590:2017 Kenya Standard — Sampling procedures for inspection by attributes — Introduction to the ISO 2859 series of standards for sampling for inspection by attributes, First Edition KS IEC 31010:2019 Kenya Standard — Risk management — Risk assessment techniques, Second Edition 26th August, 2022 THE KENYA GAZETTE KS ISO 10018:2020 Kenya Standard — Quality management — Guidance for people engagement, Second Edition KS ISO 10015:2019 Kenya Standard — Quality management — Guidelines for competence management and people development, Second Edition KS ISO 17115:2020 Kenya Standard — Health informatics — Representation of categorial structures of terminology (CatStructure), First Edition KS ISO/TS 19844:2018 Kenya Standard — Health informatics — Identification of medicinal products (IDMP) — Implementation guidelines for ISO 11238 for data elements and structures for the unique identification and exchange of regulated information on substances, First Edition KS ISO/TS 11633-1:2019 Kenya Standard — Health informatics — Information security management for remote maintenance of medical devices and medical information systems — Part 1: Requirements and risk analysis, First Edition KS ISO/TR 11633-2:2021 Kenya Standard — Health informatics — Information security management for remote maintenance of medical devices and medical information systems — Part 2: Implementation, First Edition KS 2949:2022 Kenya Standard — Specification for aquatic spine boards for recovering casualties in controlled aquatic conditions, First Edition KS ISO 14007:2019 Kenya Standard — Environmental management — Guidelines for determining environmental costs and benefits, First Edition KS ISO 14021:2016 Kenya Standard — Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling), First Edition KS ISO 14026:2017 Kenya Standard — Environmental labels and declarations — Principles, requirements and guidelines for communication of footprint information, First Edition KS ISO 7405:2018 Kenya Standard — Dentistry — Evaluation of biocompatibility of medical devices used in dentistry, Second Edition KS ISO 22052:2020 Kenya Standard — Dentistry — Central compressed air source equipment, First Edition KS ISO 10139-2:2016 Kenya Standard — Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use, Second Edition KS ISO 15098:2020 Kenya Standard — Dental tweezers, First Edition KS ISO 1797:2017 Kenya Standard — Dentistry — Shanks for rotary and oscillating instruments, Second Edition KS ISO 1942:2020 Kenya Standard — Dentistry — Vocabulary, Second Edition KS ISO 3630-1:2019 Kenya Standard — Dentistry — Endodontic instruments — Part 1: General requirements, Second Edition KS ISO 3950:2016 Kenya Standard — Dentistry — Designation system for teeth and areas of the oral cavity, Second Edition KS ISO 20126:2022 Kenya Standard — Dentistry — Manual toothbrushes — General requirements and test methods, Second Edition KS ISO 9873:2019 Kenya Standard — Dentistry — Intra-oral mirrors, Second Edition KS ISO 10993-10:2021 Kenya Standard — Biological evaluation of medical devices —Part 10: Tests for irritation and delayed type hypersensitivity, Second Edition KS ISO 10993-12:2021 Kenya Standard — Biological evaluation of medical devices — Part 12: Sample preparation and reference materials, Second Edition KS ISO 10993-15:2019 Kenya Standard — Biological evaluation of medical devices — Part 15: Identification and quantification of degradation products from metals and alloys, Second Edition KS ISO 10993-16:2017 Kenya Standard — Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables, Second Edition KS ISO 19001:2013 Kenya Standard — In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology, Second Edition KS ISO 8536-1:2011 Kenya Standard — Infusion equipment for medical use — Part 1: Infusion glass bottles, Fourth Edition KS ISO 8536-2:2010 Kenya Standard — Infusion equipment for medical use — Part 2: Closures for infusion bottles, Third Edition KS ISO 8536-3:2009 Kenya Standard — Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles, Second Edition KS ISO 8536-4:2019 Kenya Standard — Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed, Second Edition KS ISO 23500-2:2019 Kenya Standard — Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies, First Edition KS IEC 60601-2-33:2015 Kenya Standard — Medical electrical equipment — Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis, First Edition KS IEC 60601-2-43:2019 Kenya Standard — Medical electrical equipment — Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures and related corrigenda, Second Edition KS ISO 1135-3:2016 Kenya Standard — Transfusion equipment for medical use — Part 3: Blood-taking sets for single use, Second Edition KS ISO 1135-4:2015 Kenya Standard — Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed, Second Edition KS ISO 1135-5:2015 Kenya Standard — Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus, First Edition KS ISO 23907-1:2019 Kenya Standard — Sharps injury protection — Requirements and test methods — Part 1: Single-use sharps containers, First Edition KS ISO 23907-2:2019 Kenya Standard — Sharps injury protection — Requirements and test methods — Part 2: Reusable sharps containers, First Edition KS ISO 16321-1:2021 Kenya Standard — Eye and face protection for occupational use — Part 1: General requirements, First Edition 6822 6822 KS ISO 18526-1:2020 Kenya Standard — Eye and face protection — Test methods — Part 1: Geometrical optical properties, First Edition KS ISO 18526-2:2020 Kenya Standard — Eye and face protection — Test methods — Part 2: Physical optical properties, First Edition KS ISO 18526-3:2020 Kenya Standard — Eye and face protection — Test methods — Part 3: Physical and mechanical properties, First Edition KS ISO 5367:2014 Kenya Standard — Anaesthetic and respiratory equipment — Breathing sets and connectors, Second Edition KS ISO 4135:2022 Kenya Standard — Anaesthetic and respiratory equipment — Vocabulary, Second Edition KS ISO 7153-1:2016 Kenya Standard — Surgical instruments — Materials — Part 1: Metals, Second Edition KS EAS 1018:2021 Kenya Standard — Surgical suture needles — Specification, First Edition KS EAS 1019-1:2021 Kenya Standard — Surgical sutures — Specification — Part 1: Absorbable, First Edition KS EAS 1019-2: 2021 Kenya Standard — Surgical sutures — Specification — Part 2: Non-absorbable, First Edition KS ISO 15190:2020 Kenya Standard — Medical laboratories — Requirements for safety, First Edition KS ISO 15195:2018 Kenya Standard — Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures, First Edition KS ISO 15197:2018 Kenya Standard — In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus, First Edition KS ISO 16256:2021 Kenya Standard — Clinical laboratory testing and in vitro diagnostic test systems — Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases, First Edition KS ISO 17822:2020 Kenya Standard — In vitro diagnostic test systems — Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens — Laboratory quality practice guide, First Edition KS ISO/TS 20658:2017 Kenya Standard — Medical laboratories — Requirements for collection, transport, receipt, and handling of samples, First Edition KS ISO 22367:2020 Kenya Standard — Medical laboratories — Application of risk management to medical laboratories, First Edition KS ISO 23162:2021 Kenya Standard — Basic semen examination — Specification and test methods, First Edition KS ISO 21924-1:2017 Kenya Standard — Protective equipment for martial arts — Part 1: General requirements and test methods, First Edition KS ISO 21924-2:2017 Kenya Standard — Protective equipment for martial arts — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors, First Edition KS ISO 21924-3:2017 Kenya Standard — Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors, First Edition KS ISO 21924-4:2017 Kenya Standard — Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors, First Edition KS ISO 21924-5:2017 Kenya Standard — Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors, First Edition KS ISO 21924-6:2017 Kenya Standard — Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females, First Edition KS ISO 21924-7:2017 Kenya Standard — Protective equipment for martial arts — Part 7: Additional requirements and test methods for hand and foot protectors, First Edition KS ISO 23195:2021 Kenya Standard — Security objectives of information systems of third-party payment services, First Edition KS ISO 24165-1:2021 Kenya Standard — Digital Token Identifier (DTI) — Registration, assignment and structure — Part 1: Method for registration and assignment, First Edition KS ISO 24165-2:2021 Kenya Standard — Digital Token Identifier (DTI) — Registration, assignment and structure — Part 2: Data elements for registration, First Edition KS ISO 24366:2021 Kenya Standard — Financial services — Natural person identifier (NPI), First Edition KS ISO 10962:2021 Kenya Standard — Securities and related financial instruments — Classification of financial instruments (CFI) code, Second Edition KS ISO 21586:2020 Kenya Standard — Reference data for financial services — Specification for the description of banking products or services (BPoS), First Edition The following standards are confirmed forthwith Food KS ISO 21872-1:2017 Kenya Standard — Microbiology of the food chain — Horizontal method for the determination of vibrio spp. — Part 1: Detection of potentially enteropathogenic vibrio parahaemolyticus, vibrio cholerae and vibrio vulnificus KS ISO 18787-2017 Kenya Standard — Foodstuffs — Determination of water activity KS EAS 50:2000 Kenya Standard — Canned pineapples — Specification. Agriculture KS ISO 2165:1974 Kenya Standard — Ware potatoes — Guide to storage KS 2293:2011 Kenya Standard — Genetically modified organisms and derived products — General guidelines to methods of analysis KS 220-7:1981 Kenya Standard — Methods for microbiological examination of foods — Part 7: Method of examination for clostridium botulinum and clostridium botulinum toxin KS EAS 51:2017 Kenya Standard — Wheat grains — Specification KS ISO 21415-2:2015 Kenya Standard — Wheat and wheat flour- gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means KS COD STAN 201:1995 Kenya Standard — Standard for oats KS EAS 95:2017 Kenya Standard — Sorghum flour — Specification 26th August, 2022 THE KENYA GAZETTE KS 2271:2011 Kenya Standard — Milled cereals and pulses products — Specification KS EAS 46:2017 Kenya Standard — Dry beans — Specification KS 340:2007 Kenya Standard — Edible maize starch — Specification KS EAS 128:2017 Kenya Standard — Milled rice — Specification KS CAC/RCP 55:2004 Kenya Standard — Code of practice for the prevention and reduction of aflatoxin contamination in peanuts KS CAC/RCP 77:2017 Kenya Standard — Code of practice for the prevention and reduction of arsenic contamination in rice KS CODEX STAN 174 Kenya Standard — Codex general standard for vegetable protein products (VPP) KS ISO 5526 2015 Kenya Standard — Cereals — Vocabulary KS EAS 900:2017 Kenya Standard — Cereals and pulses — Sampling KS EAS 901:2017 Kenya Standard — Cereals and pulses — Test methods KS CAC/RCP 22-1979 Kenya Standard — Code of hygienic practice for groundnuts (peanuts) KS ISO 7302:1988 Kenya Standard — Specification for cereals and cereal products — Determination of total fat content KS ISO 13299:2016 Kenya Standard — Sensory analysis methodology — General guidance for establishing a sensory profile KS ISO 13302:2003 Kenya Standard — Sensory analysis — Methods for assessing modifications to the flavour of foodstuffs due to packaging KS ISO 16657:2006 Kenya Standard — Sensory analysis apparatus — Olive oil tasting glass KS ISO 16779:2015 Kenya Standard — Sensory analysis — Assessment — Determination and verification of the shelf life of foodstuffs KS ISO 5496:2006 Kenya Standard — Sensory analysis — Methodology initiation and training of assessors in the detection and recognition of odours KS ISO 5497:1982 Kenya Standard — Sensory analysis — Methodology guidelines for the preparation of samples for which direct analysis is not feasible KS ISO 6658:2017 Kenya Standard — Sensory analysis — Methodology general guidance KS ISO 7304-1:2016 Kenya Standard — Durum wheat semolina and alimentary pasta — Estimation of cooking quality of alimentary pasta by sensory analysis — Part 1: Reference method KS ISO 8588:2017 Kenya Standard — Sensory analysis — Methodology A Not ‘A’ test KS ISO 12824:2016 Kenya Standard — Royal jelly — Specification Chemical KS ISO 10693:1995 Kenya Standard — Soil quality — Determination of carbonate content volumetric method KS ISO 10694:1995 Kenya Standard — Soil quality — Determination of organic and total carbon after dry combustion elementary analysis KS ISO 11047:1998 Kenya Standard — Soil quality — Determination of cadmium chromium cobalt copper lead manganese nickel and zinc in aqua regia extracts of soil flame and electrothermal atomic absorption spectrometric methods KS ISO 11048:1995 Kenya Standard — Soil quality — Determination of water soluble sulfate KS ISO 11271:2002 Kenya Standard — Soil quality — Determination of redox potential field method KS ISO 14154:2005 Kenya Standard — Soil quality — Determination of some selected chlorophenols — Gas-chromatographic method with electron- capture detection KS ISO 14869-1:2001 Kenya Standard — Soil quality — Dissolution for the determination of total element content — Part 1: Dissolution with hydrofluoric and perchloric acids KS ISO 14869-2:2002 Kenya Standard — Soil quality — Dissolution for the determination of total element content — Part 2: Dissolution by alkaline fusion KS ISO GUIDE 32:1997 Kenya Standard — Calibration in analytical chemistry and use of certified reference materials KS ISO 1063:1974 Kenya Standard — Surface active agents — Determination of stability in hard water KS ISO 1066:1975 Kenya Standard — Analysis of soaps — Determination of glycerol content titrimetric method KS ISO 1104:1977 Kenya Standard — Surface active agents — Technical sodium alkyarylsulphonates excluding benzene derivatives — Method of analysis KS ISO 2267:1986 Kenya Standard — Surface active agents — Evaluation of certain effects of laundering methods of preparation and use of unsoiled cotton control cloth KS ISO 2268:1972 Kenya Standard — Surface active agents — Non ionic determination of polyethylene glycols and non ionic active matter adducts weibull method KS ISO 2270:1989 Kenya Standard — Non ionic surface active agents — Polyethoxylated Derivatives - Iodometric determination of oxyethylene groups KS ISO 2271:1989 Kenya Standard — Surface active agents — Detergents — Determination of anionic active matter by manual or mechanical direct two phase titration procedure KS ISO 2272:1989 Kenya Standard — Surface active agents soaps — Determination of low contents of free glycerol by molecular absorption spectrometry KS ISO 2456:1986 Kenya Standard — Surface active agents — Water used as a solvent for tests — Specification and test methods KS ISO 2869:1973 Kenya Standard — Surface active agents — Detergents — Anionic active matter hydrolyzable under alkaline conditions determination of hydrolyzable and non hydrolyzable anionic active matter KS ISO 4311:1979 Kenya Standard — Anionic and non ionic surface active agents — Determination of the critical micellization concentration method by measuring surface tension with a plate stirrup or ring KS ISO 4312:1989 Kenya Standard — Surface active agents — Evaluation of certain effects of laundering methods of analysis and test for unsoiled cotton control cloth KS ISO 4314:1977 Kenya Standard — Surface active agents — Determination of free alkalinity or free acidity titrimetric method KS ISO 4315:1977 Kenya Standard — Surface active agents — Determination of alkalinity titrimetric method 6824 6824 KS ISO 4316:1977 Kenya Standard — Surface active agents — Determination of pH of aqueous solution potentiometric method KS ISO 4318:1989 Kenya Standard — Surface active agents and soaps — Determination of water content azeotropic distillation method KS ISO 4320:1997 Kenya Standard — Non Ionic Surface active agents — Determination of cloud point index volumetric method KS ISO 4324:1977 Kenya Standard — Surface active agents — Powder and granules measurement of the angle of repose KS ISO 4325:1990 Kenya Standard — Soaps and detergents — Determination of chelating agent content titrimetric method KS ISO 456:1973 Kenya Standard — Surface active agents — Analysis of soaps — Determination of free caustic alkali KS ISO 457:1983 Kenya Standard — Soaps — Determination of chloride content — Titrimetric Method KS ISO 607:1980 Kenya Standard — Surface active agents and detergents — Methods of sample division KS ISO 6122:1978 Kenya Standard — Surface active agents — Technical alkane sulphonates — Determination of total alkane sulphonates content KS ISO 673:1981 Kenya Standard — Soaps — Determination of content of ethanol insoluble matter KS ISO 684:1974 Kenya Standard — Analysis of soaps — Determination of total free alkali KS ISO 6841:1988 Kenya Standard — Surface active agents — Technical straight chain sodium alkylbenzenesulfonates — Determination of mean relative molecular mass by gas liquid chromatography KS ISO 696:1975 Kenya Standard — Surface active agents — Measurement of foaming power modified ross miles method KS ISO 697:1981 Kenya Standard — Surface active agents — Washing powders — Determination of apparent density method by measuring the mass of a given volume KS ISO 893:1989 Kenya Standard — Surface active agents — Technical alkane sulfonates — Methods of analysis KS ISO 894:1977 Kenya Standard — Surface active agents — Technical sodium primary alkylsulphates — Methods of analysis KS ISO 895:1977 Kenya Standard — Surface active agents — Technical sodium secondary alkylsulphates — Methods of analysis KS ISO 10229:1994 Kenya Standard — Water quality — Determination of the prolonged toxicity of substances to freshwater fish — Method for evaluating the effects of the growth rate of rainbow trout (Oncorhynchus mykiss Walbaum (Teleostei, Salmonidae)) KS ISO 10301:1997 Kenya Standard — Water quality — Determination of high volatile halogenated hydrocarbons gas chromatographic methods KS ISO 11083:1994 Kenya Standard — Water quality — Determination of chromium (VI) — Spectrometric method using 1,5- diphenylcarbazide KS ISO 11423-1:1997 Kenya Standard — Water quality — Determination of benzene and some derivative — Part 1: Head space gas chromatographic method KS ISO 11423-2:1997 Kenya Standard — Water quality — Determination of benzene and some derivative — Part 2: Method using extraction and gas chromatography KS ISO 11905-1:1997 Kenya Standard — Water quality — Determination of nitrogen — Part 1 Method using oxidative digestion with peroxodisulfate KS ISO 14402:1999 Kenya Standard — Water quality — Determination of phenol index by flow analysis (FIA and CFA) KS ISO 14592-1:2002 Kenya Standard — Water quality — Evaluation of the aerobic biodegradability of organic compounds at low concentrations — Part 1: Shake flask batch test with surface water or surface water sediment suspensions KS ISO 14592-2:2002 Kenya Standard — Water quality — Evaluation of the aerobic biodegradability of organic compounds at low concentrations — Part 2: Continuous flow river model with attached biomass KS ISO 15089:2000 Kenya Standard — Water quality — Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents KS ISO 15913:2000 Kenya Standard — Water quality — Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization KS ISO 5667-19:2004 Kenya Standard — Water quality — Sampling — Part 19: Guidance on sampling of marine sediments KS ISO 5667-7:1993 Kenya Standard — Water quality — Sampling — Part 7: Guidance on sampling of water and steam in boiler plants KS ISO 5667-8:1993 Kenya Standard — Water quality — Sampling — Part 8: Guidance on the sampling of wet deposition KS ISO 5667-9:1992 Kenya Standard — Water quality — Sampling — Part 9: Guidance on sampling from marine waters KS ISO 5815-1:2003 Kenya Standard — Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 1: Dilution and seeding method with allylthiourea addition KS ISO 5815-2:2003 Kenya Standard — Water quality — Determination of Biochemical Oxygen Demand After n days (BODn) — Part 2: Method for undiluted samples KS ISO 5961:1994 Kenya Standard — Water quality — Determination of cadmium by atomic absorption spectrometry KS ISO 6060:1989 Kenya Standard — Water quality — Determination of the chemical oxygen demand KS ISO 6332:1988 Kenya Standard — Water quality — Determination of iron spectrometric method using 1,10-Phenanthroline KS ISO 6439:1990 Kenya Standard — Water quality — Determination of phenol index — 4- Aminoantipyrine spectrometric methods after distillation KS ISO 6461-1:1986 Kenya Standard — Specification for water quality — Detection and enumeration of the spores of sulfite reducing anaerobes (Clostridia) 26th August, 2022 THE KENYA GAZETTE — Part 1: Method by enrichment in a liquid medium KS ISO 6461-2:1986 Kenya Standard — Specification for water quality — Detection and enumeration of the spores of sulfite reducing anaerobes (Clostridia) — Part 2: Method by membrane filtration KS ISO 6468:1996 Kenya Standard — Water quality — Determination of certain organochlorine insecticides polychlorinated biphenyl and chlorobenzenes gas chromatographic method after liquid extraction KS ISO 6703-1:1984 Kenya Standard — Water quality — Determination of cyanide — Part 1: Determination of total cyanide KS ISO 6703-2:1984 Kenya Standard — Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide KS ISO 6703-3:1984 Kenya Standard — Water quality — Determination of cyanide — Part 3: Determination of cyanogen chloride KS ISO 7393-1:1985 Kenya Standard — Water quality — Detection of free chlorine and total chlorine — Part 1: Titrametric method using N, N-Diethyl 1, 4- Phenylenediamine KS ISO 7393-3:1990 Kenya Standard — Water quality — Detection of free chlorine and total chlorine — Part 3: Iodometric titrametric method for the determination of total chlorine KS ISO 7899-1:1998 Kenya Standard — Specification for water quality — Detection and Enumeration of faecal streptococci — Part 1: Method by enrichment in a liquid medium KS ISO 7980:1986 Kenya Standard — Water quality — Determination of calcium and magnesium atomic absorption spectrometric method KS ISO 8288:1986 Kenya Standard — Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods KS ISO 8689-1:2000 Kenya Standard — Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates KS ISO 8689-2:2000 Kenya Standard — Water quality — Biological classification of rivers — Part 2: Guidance on presentation of biological quality data from surveys of benthic — macroinvertebrates KS ISO 9174:1998 Kenya Standard — Water quality — Determination of chromium — Atomic absorption spectrometric methods KS ISO 9297:1989 Kenya Standard — Water quality — Determination of chloride silver nitrate titration with chromate indicator — Mohrs method KS ISO 9377-2:2000 Kenya Standard — Water quality — Determination of hydrocarbon oil index — Part 2: Method using solvent extraction and gas chromatography KS ISO 9964-2:1993 Kenya Standard — Water quality — Determination of sodium and potassium — Part 2: Determination of potassium by atomic absorption spectrometry KS ISO 8265:1988 Kenya Standard — Water quality — Design and use of quantitative samplers for benthic macroinvertebrates on stony substrata in shallow freshwaters KS ISO 6340:1995 Kenya Standard — Water quality — Detection of salmonella species KS ISO 5667-2:1991 Kenya Standard — Water quality — Sampling — Part 2: Guidance on sampling techniques KS ISO 5667-18:2001 Kenya Standard — Water quality — Sampling — Part 18: Guidance on sampling of groundwater at contaminated sites KS ISO 5666:1999 Kenya Standard — Water quality — Determination of mercury KS ISO 10304-2:1995 Kenya Standard — Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water KS ISO 10381-1:2002 Kenya Standard — Soil quality — Sampling — Part 1: Guidance on the design of sampling programmes KS ISO 10381-3:2001 Kenya Standard — Soil quality — Sampling — Part 3: Guidance on Safety KS ISO 11074-1:1996 Kenya Standard — Soil quality — Vocabulary — Part 1: Terms and definitions relating to the protection and pollution of the soil KS ISO 11074-2:1998 Kenya Standard — Soil quality — Vocabulary — Part 2: Terms and definitions relating to sampling KS ISO 11259:1998 Kenya Standard — Soil quality — Simplified soil description Leather and Textile KS ISO 17608:2015 Kenya Standard — Textiles bare elastane yarns — Determination of resistance to chlorinated water swimming pool water KS ISO 23733:2007 Kenya Standard — Textiles — Chenille yarns — Test method for the determination of linear density KS ISO 2646:1974 Kenya Standard — Wool — Measurement of the length of fibres processed on the worsted system using a fibre diagram machine KS ISO 1130:1975 Kenya Standard — Textile fibres — Some methods of sampling for testing KS ISO 2915:1975 Kenya Standard — Wool — Determination of cysteic acid content of wool hydrolysates by paper electrophoresis and colorimetry KS ISO 2916:1975 Kenya Standard — Wool — Determination of alkali content KS ISO 3072:1975 Kenya Standard — Wool — Determination of solubility in alkali KS ISO 3073:1975 Kenya Standard — Wool — Determination of acid content KS 630-2:1987 Kenya Standard — Method for determination of tenacity of textile fibres and yarns — Part 2: Yarns KS 795-1:1987 Kenya Standard — Method of test for elastic fabrics and yarns — Part 1: Elastic fabrics KS 1114-1:1993 Kenya Standard — Specification for textured filament yarns — Part 1: Polyester yarns KS 1280-2:1992 Kenya Standard — Method for determination of crimp properties of textured filament yarns — Part 2: Yarns of linear density of more than 50 tex KS 1387:1998 Kenya Standard — Glossary of terms on morphology of fibres and yarns KS 209-1:1981 Kenya Standard — Glossary of textile terms relating to man made fibre and fabric industry — Part 1: Man-made fibres 6826 6826 KS 209-2:1979 Kenya Standard — Glossary of textile terms relating to man made fibre and fabric industry — Part 2: Man-made fibre fabrics KS 267-3:1983 Kenya Standard — Conversion tables and methods of designation of textile yarns — Part 3: Integrated conversion tables for replacing traditional yarn numbers by rounded values in the tex KS 1391-1:2000 Kenya Standard — Methods of test for wool fibres — Part 1: Determination of short term irregularity of linear density of slivers rovings and yarns by means of an electronic method KS 543-1:2000 Kenya Standard — Specification for cotton embroidery threads — Part 1: Cotton embroidery threads KS 1141:1992 Kenya Standard — Method for designation of ticket numbers of sewing threads KS 1258-1:1993 Kenya Standard — Code of practice for grading of spun yarns — Part 1: Cotton yarns KS 1280-1:1995 Kenya Standard — Method for determination of crimp properties of textured filament yarns — Part 1: Yarns of linear density of up to 50 tex KS 479-1:1992 Kenya Standard — Specification for sewing threads — Part 1: Cotton sewing threads KS 479-2:1992 Kenya Standard — Specification for sewing threads — Part 2: Sewing threads made wholly or partly from synthetic fibres KS ISO 9866-1:1991 Kenya Standard — Textiles — Effect of dry heat on fabrics under low pressure — Part 1: Procedure for dry heat treatment of fabrics KS ISO 9866-2:1991 Kenya Standard — Textiles — Effect of dry heat on fabrics under low pressure — Part 2: Determination of dimensional change in fabrics exposed to dry heat KS ISO 9867:2009 Kenya Standard — Textiles — Evaluation of wrinkle recovery of fabrics — Appearance method KS ISO/TR 12116:2008 Kenya Standard — Textiles — Methods of simulating colour change during actual wear by means of laboratory colour fastness tests KS ISO 17881-2:2016 Kenya Standard — Textiles — Determination of certain flame retardants — Part 2: Phosphorous flame retardants KS ISO 105-J05:2007 Kenya Standard — Textiles — Tests for colour fastness — Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant cmccon02 KS ISO 18074:2015 Kenya Standard — Textiles — Identification of some animal fibres by dna analysis method cashmere wool yak and their blends KS ISO 17751-1:2016 Kenya Standard — Textiles — Quantitative analysis of cashmere wool other speciality animal fibers and their blends — Part 1: Light microscopy method KS ISO 17751-2:2016 Kenya Standard — Textiles — Quantitative analysis of cashmere wool other speciality animal fibers and their blends — Part 2: Scanning electron microscopy method KS ISO 17881-1:2016 Kenya Standard — Textiles — Determination of certain flame retardants textiles determination of certain flame retardants KS ISO 14362-3:2017 Kenya Standard — Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 3: Detection of the use of certain azo colorants which may release 4 aminoazobenzene KS 747-2:1989 Kenya Standard — Preservative treatments for textiles — Part 2: Methods of test KS 887:1989 Kenya Standard — Methods of test for cone parameters KS 1306:1999 Kenya Standard — Classification and nomenclature of dyeing printing finishing and allied accessories KS 1232:1992 Kenya Standard — Specification for cheese dyeing cylindrical tubes KS ISO 105-A05:1996 Kenya Standard — Tests for colour fastness — Part A05: Instrumental assessment of change in colour for determination of grey scale rating KS ISO 105-A06:1995 Kenya Standard — Tests for colour fastness — Part A06: Instrumental determination of 1/1 standard depth of colour KS EAS 239:2001 Kenya Standard — Textiles — Materials tests for colour fastness colour fastness to rubbing — Part 1: Dry and wet — Part 2: Organic solvents KS ISO 105-A08:2001 Kenya Standard — Textiles tests for colour fastness — Part A08: Vocabulary used in colour measurement KS 126-2:1978 Kenya Standard — Methods for preparing laboratory test samples and test specimens for textile materials for chemical tests — Part 2: Methods for sampling cotton fabrics for chemical test KS 747-1:1987 Kenya Standard — Preservative treatments for textiles — Part 1: Specification for treatments KS 816:1987 Kenya Standard — Methods for determination of absorbency of absorbent textile materials KS 442:1987 Kenya Standard — Code of practice for drycleaning KS 545:1984 Kenya Standard — Method for determination of colour fastness of textiles to peroxide washing sodium perborate KS 2187:2009 Kenya Standard — Determination of cuprammonium fluidity of cotton and certain cellulosic man-made fibres — Test method KS 2188:2009 Kenya Standard — Differential dyeing behaviour of cotton — Test method KS ISO 105-A01:2010 Kenya Standard — Textiles tests for colour fastness — Part A01: General principles of testing KS ISO 139:2055 Amd 1:2011 Kenya Standard — Textiles — Standard atmospheres for conditioning and testing, AMENDMENT 1 KS ISO 105-B02:2014 Kenya Standard — Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light xenon arc fading lamp test KS ISO 105-A02:1993 Kenya Standard — Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour KS ISO 105-A04:1989 Kenya Standard — Textiles — Tests for colour fastness — Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics KS ISO 105-B04:1994 Kenya Standard — Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering xenon arc fading lamp test KS ISO 105-C10:2006 Kenya Standard — Textiles — Tests for colour fastness — Part C10: Colour fastness to washing with soap or soap and soda KS ISO 105-D01:2010 Kenya Standard — Textiles — Tests for colour fastness — Part D01: Colour fastness to dry cleaning using perchloroethylene solvent 26th August, 2022 THE KENYA GAZETTE KS ISO 105-N01:1993 Kenya Standard — Textiles — Tests for colour fastness — Part N02: Colour fastness to bleaching hypochlorite KS ISO 105-N02:1993 Kenya Standard — Textiles — Tests for colour fastness — Part N02: Colour fastness to bleaching peroxide KS ISO 105-N03:1993 Kenya Standard — Textiles — Tests for colour fastness — Part N03: Colour fastness to bleaching sodium chlorite mild KS ISO 105-X11:1994 Kenya Standard — Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing KS ISO 3758:2012 Kenya Standard — Textiles — Care labelling code using symbols KS ISO 5077:2007 Kenya Standard — Textiles — Determination of dimensional change in washing and drying KS ISO 9073-13:2006 Kenya Standard — Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike through time KS ISO 15383:2001 Kenya Standard — Protective gloves for fire fighters — Laboratory test methods and performance requirements KS ISO 9073-1:1989 Kenya Standard — Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area KS ISO 9073-16:2007 Kenya Standard — Textiles — Test methods for nonwovens — Part 16 Determination of resistance to penetration by water hydrostatic pressure KS ISO 9073-17:2008 Kenya Standard — Textiles — Test methods for nonwovens — Part 17 Determination of water penetration spray impact KS ISO 9073-18:2007 Kenya Standard — Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test KS ISO 9073-2:1995 Kenya Standard — Textiles — Test methods for nonwovens — Part 2: Determination of thickness KS ISO 9073-3:1989 Kenya Standard — Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation KS ISO 9073-6:2000 Kenya Standard — Textiles — Test methods for nonwovens — Part 6: Absorption KS ISO 9073-10:2003 Kenya Standard — Textiles — Test methods for nonwovens — Part 10: Lint and other particles generation in the dry state KS ISO 9073-5:2008 Kenya Standard — Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration ball burst procedure KS ISO 9073-7:1995 Kenya Standard — Textiles Test methods for nonwovens — Part 7: Determination of bending length KS ISO 13999-1:1999 Kenya Standard — Protective clothing gloves and arm guards protecting against cuts and stabs by land knives — Part 1: Chain mail gloves and arm guards KS ISO 9073-8:1995 Kenya Standard — Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike through time simulated urine KS ISO 9073-11:2002 Kenya Standard — Textiles — Test methods for nonwovens — Part 11: Run off KS 1029:1990 Kenya Standard — Test method for sterility of textile products KS ISO 17299-3:2014 Kenya Standard — Textiles — Determination of deodorant property — Part 3: Gas chromatography method Engineering KS 2177:2017 Kenya Standard — Weld mesh — Specification KS 2701:2017 Kenya Standard — Mobile access and working towers made of prefabricated elements materials dimensions design loads — Safety and performance requirements KS 2702:2017 Kenya Standard — Facade scaffolds made of prefabricated components products — Specification KS 572:2017 Kenya Standard — Hot rolled structural steel sections — Specification KS 1244:2010 Kenya Standard — Clay window sills — Specification KS 1987:2006 Kenya Standard — Glossary of terms relating to structural clay products KS 2724:2017 Kenya Standard — Construction of suspended floor and roof with concrete ribs and hollow clay blocks — Code of practice KS 680:1991 Kenya Standard — Glossary of terms relating to floor coverings KS 767:1989 Kenya Standard — Code of practice for laying clay flooring tiles KS 766:1990 Kenya Standard — Specification for clay flooring tiles KS ISO/TR 8357:1996 Kenya Standard — Road vehicles — Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicle identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes KS ISO 4548-9:2008 Kenya Standard — Methods of test for full flow lubricating oil filters for internal combustion engines — Part 9: Inlet and outlet anti drain valve tests KS ISO 4548-7:2012 Kenya Standard — Methods of test for full flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test KS ISO 3780:2009 Kenya Standard — Road vehicles — World manufacturer identifier (WMI) code Electrotechnical KS 1641:2000 Kenya Standard — Specification for direct current and low frequency electronic measuring instruments with a digital display KS IEC 60050-551:1998 Kenya Standard — Glossary of terms for power electronics KS IEC/TR 61438:1996 Kenya Standard — Possible safety and health hazards in the use of alkaline secondary cells and batteries — Guide to equipment manufacturers and users KS IEC/TR 62060:2001 Kenya Standard — Secondary cells and batteries — Monitoring of lead acid stationary batteries user guide KS IEC/TR 62393:2005 Kenya Standard — Portable and hand held multimedia equipment — Mobile computers battery run time measurement KS IEC/TS 61430:1997 Kenya Standard — Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards lead acid starter batteries KS 1059-1:2010 Kenya Standard — Specification for general requirements for apparatus for connection to the 6828 6828 public switched telephone networks — Part 1: General requirements KS 1278:1998 Kenya Standard — Specification for external TV aerials in the frequency range 30 MHz to 1 GHz KS 1503-1:1999 Kenya Standard — Glossary of terms relating to electromagnetic interference EMI and electromagnetic compatibility EMC — Part 1: Fundamental terms in relation to electromagnetism KS 1589:2000 Kenya Standard — Specification for safety practices in the operation and maintenance of radio transmitters and similar equipment KS IEC 60050-704:1993 Kenya Standard — Glossary of terms for transmission in electronics and telecommunications KS IEC 60050-712:1992 Kenya Standard — Glossary of terms for antennas KS IEC 60050-713:1998 Kenya Standard — Glossary of terms for radiocommunications transmitters receivers networks and operation KS IEC 60050-723:1997 Kenya Standard — Definitions of terms for broadcasting sound television and data KS IEC 60050-731:1991 Kenya Standard — International Electrotechnical Vocabulary — Chapter 731: Optical fibre communication KS IEC 60050-807:1998 Kenya Standard — Glossary of terms for digital recording audio and video signals KS IEC 60094-1:1981 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 1: General conditions and requirements KS IEC 60094-2:1994 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 2: Calibration tapes KS IEC 60094-4:1986 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 4: Mechanical magnetic tape properties KS IEC 60094-5:1988 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 5: Electrical magnetic tape properties KS IEC 60094-6:1985 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 6: Reel to reel systems KS IEC 60094-7:1986 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 7: Cassette for commercial tape records and domestic use KS IEC 60094-10:1988 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 10: Time and address codes KS IEC 60094-11:1988 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 11: Address code for compact cassettes KS IEC 60107-1:1997 Kenya Standard — Methods of measurement of receivers for television broadcast transmissions — Part 1: General considerations measurements at radio and video frequencies KS IEC 60107-2:1997 Kenya Standard — Methods of measurement of receivers for television broadcast transmissions — Part 2: Audio channels general methods and methods for monophonic channels KS IEC 60107-3:1999 Kenya Standard — Methods of measurement of receivers for television broadcast transmissions — Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems KS IEC 60107-4:1999 Kenya Standard — Methods of measurement of receivers for television broadcast transmissions — Part 4: Electrical measurements on multichannel sound television receivers using the two carrier FM system KS IEC 60107-5:1999 Kenya Standard — Methods of measurements of receivers for television broadcast transmissions — Part 5: Electrical measurements on multichannel sound television receivers using the nicam two channel digital sound system KS IEC 60107-6:1989 Kenya Standard — Methods of measurement of receivers for television broadcast transmissions — Part 6: Measurements under conditions different from broadcast signal standards KS IEC 60107-7:1997 Kenya Standard — Methods of measurement of receivers for television broadcast transmissions — Part 7: HDTV displays KS IEC 60244-1:1999 Kenya Standard — Methods of measurement for radio transmitter — Part 1: General characteristics for broadcast transmitters KS IEC 60244-10:1986 Kenya Standard — Methods of measurement for radio transmitter — Part 10: Methods of measurements for television transmitters and transposers employing insertion test signals KS IEC 60244-11:1989 Kenya Standard — Methods of measurement for radio transmitter — Part 11: Transposers for FM sound broadcasting KS IEC 60244-13:1991 Kenya Standard — Methods of measurement for radio transmitter — Part 13: Performance characteristics for FM sound broadcasting KS IEC 60244-14:1997 Kenya Standard — Methods of measurement for radio transmitter — Part 14: External intermodulation products caused by two or more transmitters using the same or adjacent antennas KS IEC 60244-15:1999 Kenya Standard — Methods of measurement for radio transmitter — Part 15: Amplitude modulated transmitters for sound broadcasting KS IEC 60244-2:1969 Kenya Standard — Methods of measurement for radio transmitter — Part 2: Bandwidth out of band power and power of non essential oscillations KS IEC 60244-3:1972 Kenya Standard — Methods of measurement for radio transmitter — Part 3 Wanted and unwanted modulation KS IEC 60244-4:1973 Kenya Standard — Methods of measurement for radio transmitter — Part 4: Amplitude frequency characteristics and non linearity distortion in transmitters for radiotelephony and sound broadcasting KS IEC 60244-5:1992 Kenya Standard — Methods of measurement for radio transmitter — Part 5: Performance characteristics of television transmitters KS IEC 60244-6:1976 Kenya Standard — Methods of measurement for radio transmitter — Part 6: Cabinet radiation at frequencies between 130 Khz and 1 Ghz KS IEC 60244-7:1979 Kenya Standard — Methods of measurement for radio transmitter — Part 7: Cabinet radiation at frequencies above 1 GHz KS IEC 60244-8:1993 Kenya Standard — Methods of measurement for radio transmitter — Part 8: Performance characteristics of vestigial sideband demodulation used for testing television transmitters and transposers KS IEC 60244-9:1993 Kenya Standard — Methods of measurement for radio transmitter — Part 9: Performance characteristics of television transposers 26th August, 2022 THE KENYA GAZETTE KS IEC 60268-1:1985 Kenya Standard — Sound system equipment — Part 1: General KS IEC 60268-10:1991 Kenya Standard — Sound system equipment — Part 10: Peak programme level meters KS IEC 60268-11:1987 Kenya Standard — Sound system equipment — Part 11: Application of connectors for the interconnection of sound system components KS IEC 60268-13:1998 Kenya Standard — Sound system equipment — Part 13: Listening tests on loudspeakers KS IEC 60268-17:1990 Kenya Standard — Sound system equipment — Part 17: Standard volume indicators KS IEC 60268-18:1995 Kenya Standard — Sound system equipment — Part 18: Peak programme level meters digital audio peak level meter KS IEC 60268-2:1987 Kenya Standard — Sound system equipment — Part 2: Explanation of general terms and calculation methods KS IEC 60268-6:1971 Kenya Standard — Sound system equipment — Part 6: Auxiliary passive elements KS IEC 60268-8:1973 Kenya Standard — Sound system equipment — Part 8: Automatic gain control devices KS IEC 60268-9:1977 Kenya Standard — Sound system equipment — Part 9: Artificial reverberation time delay and frequency shift equipment KS IEC 60315-1:1988 Kenya Standard — Methods of measurement on radio receivers for various classes of emission — Part 1: General considerations and methods of measurement including audio frequency measurements KS IEC 60315-3:1999 Kenya Standard — Methods of measurement on radio receivers for various classes of emission — Part 3: Receivers for amplitude modulated sound broadcasting emissions KS IEC 60315-4:1997 Kenya Standard — Methods of measurement on radio receivers for various classes of emission — Part 4: Receivers for frequency modulated sound broadcasting emissions KS IEC 60315-6:1991 Kenya Standard — Methods of measurement on radio receivers for various classes of emission — Part 6: General purpose communication receivers KS IEC 60461:2010 Kenya Standard — Time and control code KS IEC 60735:1991 Kenya Standard — Measuring methods for video tape properties KS IEC 60908:1999 Kenya Standard — Audio recording compact disc digital audio system KS IEC 60950-1:2005, Kenya Standard — Information technology equipment — Safety — Part 1: General requirements KS IEC 60950-21:2002 Kenya Standard — Information technology equipment — Safety — Part 21: Remote power feeding KS IEC 60950-22:2016 Kenya Standard — Information technology equipment — Safety — Part 22: Equipment to be installed outdoors KS IEC 60950-23:2005 Kenya Standard — Information technology equipment — Safety — Part 23: Large data storage equipment KS IEC 61077:1991 Kenya Standard — Helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type VHS - Compact VHS video cassette KS IEC 61105:1991 Kenya Standard — Reference tapes for video tape recorder systems KS IEC 61606-1:2009 Kenya Standard — Audio and audiovisual equipment — Digital audio parts — Basic measurement methods of audio characteristics — Part 1: General KS IEC 61606-2:2009 Kenya Standard — Audio and audiovisual equipment — Digital audio parts — Basic measurement methods of audio characteristics — Part 2: Consumer use KS IEC 61606-3:2008 Kenya Standard — Audio and audiovisual equipment — Digital audio parts — Basic Measurement Methods of Audio Characteristics — Part 3: Professional use KS IEC 61606-4:2005 Kenya Standard — Audio and audiovisual equipment — Digital audio parts — Basic measurement methods of audio characteristics — Part 4: Personal computer KS IEC 61883-1:2008 Kenya Standard — Consumer audio video equipment — Digital interface — Part 1: General KS IEC 61883-2:2004 Kenya Standard — Consumer audio video equipment — Digital interface — Part 2: SD DVCR data transmission KS IEC 61883-5:2004 Kenya Standard — Consumer audio video equipment — Digital interface — Part 5: SDL DVCR data transmission KS IEC 61888-3:2004 Kenya Standard — Consumer audio video equipment — Digital interface — Part 3: HD DVCR data transmission KS IEC 61966-2-2:2003 Kenya Standard — Multimedia systems and equipment colour measurement and management — Part 2-2: Colour management extended RGB colour space SCRGB KS IEC 61966-3:2000 Kenya Standard — Specification for multimedia systems and equipment colour measurement and management — Part 3: Equipment using cathode ray tubes KS IEC 62075:2012 Kenya Standard — Audio video information and communication technology equipment — Environmentally conscious design KS IEC 62151:2000 Kenya Standard — Safety of equipment electrically connected to a telecommunication network KS IEC/CISPR 16-2-4:2003 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-4: Methods of measurement of disturbances and immunity measurements KS IEC/TR 62393:2005 Kenya Standard — Portable and hand held multimedia equipment — Mobile computers battery run time measurement KS ISO/IEC 10731:1994 Kenya Standard — Information Technology — Open systems interconnection — Basic reference model conventions for the definition of OSI services KS IEC 60730-2-15:2017 Kenya Standard — Automatic electrical controls — Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls KS IEC 62894:2014 Kenya Standard — Photovoltaic inverters — Data sheet and name plate KS IEC 61427-1:2013 Kenya Standard — Telecontrol equipment and systems — Part 1: Secondary cells and batteries for renewable energy storage - General requirements and methods of test — Part 1: Photovoltaic off-grid application KS IEC 61427-2:2015 Kenya Standard — Telecontrol equipment and systems — Part 2: Secondary cells and batteries 6830 6830 for renewable energy storage - General requirements and methods of test — Part 2: On- grid application KS IEC/TR 60870-1-5:2000 Kenya Standard — Telecontrol equipment and systems — Part 1-5: General considerations — Influence of modem transmission procedures with scramblers on the data integrity of transmission systems using the protocol IEC 60870-5 KS IEC/TR 60870-1-1:1988 Kenya Standard — Telecontrol equipment and systems — Part 1: General considerations — Section one: General principles KS IEC 62053-52:2005 Kenya Standard — Electricity metering equipment (AC) — Particular requirements — Part 52: Symbols KS IEC 62055-31:2005 Kenya Standard — Electricity metering — Payment systems — Part 31: Particular requirements — Static payment meters for active energy (classes 1 and 2) KS IEC 62059-32-1:2011 Kenya Standard — Electricity metering equipment — Dependability — Part 32-1: Durability — Testing of the stability of metrological characteristics by applying elevated temperature KS IEC/TR 62055-21:2005 Kenya Standard — Electricity metering — Payment systems — Part 21: Framework for standardization KS IEC/TS 62351-1:2007 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 1: Communication network and system security — Introduction to security issues KS IEC/TS 62351-2:2008 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 2: Glossary of terms KS IEC 62351-3:2014 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 3: Communication network and system security — Profiles including TCP/IP KS IEC/TS 62351-5:2013 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 5: Security for IEC 60870-5 and derivatives KS IEC/TR 62351-10:2012 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 10: Security architecture guidelines KS IEC/TS 62351-11:2016 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 11: Security for XML document KS IEC/TR 62351-12:2016 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 12: Resilience and security recommendations for power systems with distributed energy resources (DER) cyber- physical systems KS IEC/TR 62351-13:2016 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 13: Guidelines on security topics to be covered in standards and specifications KS IEC 61558-2-19:2000 Kenya Standard — Safety of power transformers — Power supply units and similar devices — Part 2-19 Particular requirements for perturbation attenuation transformers KS IEC 60947-5-7:2003 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements — Requirements for proximity devices with analogue outpu KS 2416-2:2017 Kenya Standard — Information Technology — Learning, education and training Part 2: Minimum requirements for application software intended for eLearning — Specification KS IEC 62018:2003 Kenya Standard — Power consumption of information technology equipment — Measurement methods KS ISO 19105:2000 Kenya Standard — Geographic information — Conformance and testing KS ISO 19106:2004 Kenya Standard — Geographic information — Profiles KS ISO 19108 Kenya Standard — Geographic information — Temporal schema KS ISO 5807:1985 Kenya Standard — Information Processing — Documentation symbols and conventions for data program and system flowcharts — Program network charts and system resources charts KS ISO 8439:1990 Kenya Standard — Forms design basic layout KS ISO/IEC 10040:2001 Kenya Standard — Specification for open systems interconnection — Systems management overview KS ISO/IEC 11404:2007 Kenya Standard — Information technology — General-Purpose Datatypes (GPD) KS ISO/IEC 13236:1998 Kenya Standard — Information Technology — Specification for quality of service — Framework KS ISO/IEC 13818-3:1998 Kenya Standard — Information Technology — Generic coding of moving pictures and associated audio information — Part 3: Audio KS ISO/IEC 13818-7:2006 Kenya Standard — Information Technology — Generic coding of moving pictures and associated audio information — Part 7: Advanced Audio Coding (AAC) KS ISO/IEC 15026-2:2011 Kenya Standard — Systems and software engineering — Systems and software assurance — Part 2: Assurance case KS ISO/IEC 15026-3:2015 Kenya Standard — Systems and software engineering — Systems and software assurance — Part 3: System integrity levels KS ISO/IEC 25001:2014 Kenya Standard — Software engineering — Product evaluation — Planning and management KS ISO/IEC 25010:2011 Kenya Standard — Systems and Software Engineering Systems and Software — Quality requirements and evaluation square system and software quality models KS ISO/IEC 25040:2011 Kenya Standard — Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Evaluation process KS ISO/IEC 25041:2012 Kenya Standard — Software engineering — Product evaluation — Evaluation guide for developers, acquirers and independent evaluators KS ISO/IEC 25051:2013 Kenya Standard — Systems and software Quality Requirements and Evaluation (SQuaRE) — Requirements for quality of Ready to Use 26th August, 2022 THE KENYA GAZETTE Software Product (RUSP) and instructions for testing KS ISO/IEC 26300-1:2015 Kenya Standard — Information Technology — Open document format for office applications (open document) v1.0 KS ISO/IEC 29155-1:2011 Kenya Standard — Systems and software engineering information technology — Project performance benchmarking framework — Part 1: Concepts and definitions KS ISO/IEC 29155-2:2013 Kenya Standard — Systems and software engineering information technology — Project performance benchmarking framework — Part 2: Requirements for benchmarking KS ISO/IEC 29155-3:2015 Kenya Standard — Systems and software engineering information technology — Project performance benchmarking framework — Part 3: Guidance for reporting KS ISO/IEC 29155-4:2016 Kenya Standard — Systems and software engineering information technology — Project performance benchmarking framework — Part 4: Guidance for data collection and maintenance KS ISO/IEC 29500-1:2008 Kenya Standard — Information Technology — Document description and processing languages office open Xml file formats — Part 1: Fundamentals and markup language reference KS ISO/IEC 29500-2:2008 Kenya Standard — Information Technology — Document description and processing languages office open Xml file formats — Part 2: Open packaging conventions KS ISO/IEC 29500-3:2008 Kenya Standard — Information Technology — Document description and processing languages office open Xml file formats — Part 3: Markup compatibility and extensibility KS ISO/IEC 29500-4:2008 Kenya Standard — Information Technology — Document description and processing languages office open Xml file formats — Part 4: Transitional migration features KS ISO/IEC 30121:2015 Kenya Standard — Information Technology — Governance of digital forensic risk framework KS ISO/IEC 30134-1:2016 Kenya Standard — Information Technology — Data centres — Key performance indicators — Part 1: Overview and general requirements KS ISO/IEC 30134-2:2016 Kenya Standard — Information Technology — Data centres — Key performance indicators — Part 2: Power usage effectiveness (PUE) KS ISO/IEC 30134-3:2016 Kenya Standard — Information Technology — Data centres — Key performance indicators — Part 3: Renewable energy factor (REF) KS ISO/IEC 38501:2015 Kenya Standard — Information Technology — Governance of IT implementation guide KS ISO/IEC 6523-1:2001 Kenya Standard — Information Technology — Structure for the identification of organizations and organization parts — Part 1: Identification of organization identification scheme KS ISO/IEC 6523-2:2001 Kenya Standard — Information Technology — Structure for the identification of organizations and organization parts — Part 2: Registration of organization identification scheme KS ISO/IEC 7185:1990 Kenya Standard — Information Technology — Programming languages pascal KS ISO/IEC 7498-1:1994 Kenya Standard — Specification for open systems interconnection — Basic reference model — Part 1: The basic model KS ISO/IEC 7498-2:1989 Kenya Standard — Specification for open systems interconnection — Basic reference model — Part 2: Security architecture KS ISO/IEC 7498-3:1997 Kenya Standard — Specification for open systems interconnection — Basic reference model — Part 3: Naming and addressing KS ISO/IEC 7498-4:1989 Kenya Standard — Information Technology — Specification for open systems interconnection — Basic reference model — Part 4: Management framework KS ISO/IEC 8802-2:1998 Kenya Standard — Information Technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 2: Logical Link Control (LLC) KS ISO/IEC 9075-3:2016 Kenya Standard — Information Technology — Database languages — SQL — Part 3: Call- Level Interface (SQL/CLI) KS ISO/IEC 9314-1:1989 Kenya Standard — Information processing systems — Fibre Distributed Data Interface (FDDI) — Part 1: Token ring physical layer protocol PHY KS ISO/IEC 9314-13:1998 Kenya Standard — Information Technology — Fibre Distributed Data Interface (FDDI) — Part 13: Conformance test protocol implementation — Conformance statement (CT- PICS) Proforma KS ISO/IEC 9314-2:1989 Kenya Standard — Information processing systems — Fibre Distributed Data Interface (FDDI) — Part 2: Token ring media access control mac KS ISO/IEC 9314-20:2001 Kenya Standard — Information Technology — Fibre Distributed Data Interface (FDDI) — Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (PMD-ATS) KS ISO/IEC 9314-21:2000 Kenya Standard — Information Technology — Fibre Distributed Data Interface (FDDI) — Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (PHY ATS) KS ISO/IEC 9314-25:1998 Kenya Standard — Information Technology — Fibre Distributed Data Interface (FDDI) — Part 25: Abstract test suite for FDDI — Station management conformance testing (FDDI-SMT-ATS) KS ISO/IEC 9314-3:1990 Kenya Standard — Information processing systems — Fibre Distributed Data Interface (FDDI) — Part 3: Physical Layer Medium Dependent PMD KS ISO/IEC 9314-5:1995 Kenya Standard — Information processing systems — Fibre Distributed Data Interface (FDDI) — Part 5: Hybrid Ring Control (HRC) KS ISO/IEC 9314-6:1998 Kenya Standard — Information processing systems — Fibre Distributed Data Interface (FDDI) — Part 6: Station Management (SMT) KS ISO/IEC 9314-7:1998 Kenya Standard — Information Technology — Fibre Distributed Data Interface (FDDI) — Part 7: Physical Layer Protocol (PHY 2) KS ISO/IEC 9314-8:1998 Kenya Standard — Information Technology — Fibre Distributed Data Interface (FDDI) — Part 8: Media Access Control 2 (MAC 2) 6832 6832 KS ISO/IEC 9314-9:2000 Kenya Standard — Information Technology — Fibre Distributed Data Interface (FDDI) — Part 9: Low Cost Fibre Physical Layer Medium Dependent (LCF PMD) KS ISO/IEC 9595:2001 Kenya Standard — Specification for open systems interconnection — Common management information service KS ISO IEC/TR 12785-3 Kenya Standard — Information Technology — Learning education and training content packaging — Part 3: Best practice and implementation guide KS ISO IEC/TR 25010 Kenya Standard — Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — System and software quality models KS ISO IEC/TR 24750:2007 Kenya Standard — Information Technology — Assessment and mitigation of installed balanced cabling channels in order to support 10GBASE-T KS ISO/IEC 29155-4:2016 Kenya Standard — Systems and software engineering — Information technology project performance benchmarking framework — Part 4: Guidance for data collection and maintenance KS ISO IEC/TR 33014 Kenya Standard — Information Technology — Process assessment — Guide for process improvement KS ISO/IEC 6592:2000 Kenya Standard — Information Technology — Guidelines for The Documentation of Computer Based Application Systems KS IEC 61850-6:2009 Kenya Standard — Communication networks and systems for power utility automation — Part 6: Configuration description language for communication in electrical substations related to IEDs KS IEC 60050-444:2002 Kenya Standard — International Electrotechnical Vocabulary — Part 444: Elementary relays KS 2750:2017 Kenya Standard — Measurement and verification of energy savings KS IEC 61010-1:2010+AMD1:2016 Kenya Standard — Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements KS IEC 61554:1999 Kenya Standard — Panel mounted equipment — Electrical measuring instruments — Dimensions for panel mounting KS IEC 60679-1:2017 Kenya Standard — Piezoelectric, dielectric and electrostatic oscillators of assessed quality — Part 1: Generic specification KS IEC 60679-2:1981 Kenya Standard — Quartz crystal controlled oscillators — Part 2: Guide to the use of quartz crystal controlled oscillators KS ISO 2178:2016 Kenya Standard — Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method KS ISO 2714:2017 Kenya Standard — Liquid hydrocarbons — Volumetric measurement by displacement meter KS ISO 2715:2017 Kenya Standard — Liquid hydrocarbons — Volumetric measurement by turbine flowmeter KS ISO 3650:1998 Kenya Standard — Geometrical Product Specifications (GPS) — Length standards — Gauge block KS 824:2000 Kenya Standard — Glossary of terms and symbols relating to geomechanics KS 723:1986 Kenya Standard — Specification for expression of the properties of spectrum analyzers KS 724:1986 Kenya Standard — Specification for expression of the properties of signal generators Services KS ISO/TR 8550-1:2007 Kenya Standard — Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 1: Acceptance sampling KS ISO/TR 8550-2:2007 Kenya Standard — Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 2: Sampling by attributes KS ISO/TR 8550-3:2007 Kenya Standard — Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 3: Sampling by variables KS ISO 11014:2009 Kenya Standard — Safety data sheet for chemical products content and order of sections KS ISO 16269-7:2001 Kenya Standard — Statistical interpretation of data — Part 7: Median estimation and confidence intervals KS ISO 2854:1976 Kenya Standard — Statistical interpretation of data techniques of estimation and test relating to means and variances KS ISO 3301:1975 Kenya Standard — Statistical interpretation of data comparison of two means in the case of paired observations KS ISO 3534-1:2006 Kenya Standard — Statistics — Vocabulary and symbols — Part 1: General statistical terms used in probability KS ISO 3534-2:2006 Kenya Standard — Statistics — Vocabulary and symbols — Part 2: Applied statistics KS ISO 15197:2018 Kenya Standard — In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus KS ISO 14289-1:2014 Kenya Standard — Document management — Applications electronic document file format enhancement for accessibility — Part 1: Use of ISO 32000 1 Pdf UA 1 KS ISO 14739-1:2014 Kenya Standard — Document management — 3D Use of product representation compact PRC format — Part 1: PRC 10001 KS ISO 11108:1996 Kenya Standard — Information and documentation — Archival paper requirements for permanence and durability KS ISO 11798:1999 Kenya Standard — Information and documentation — Permanence and durability of writing printing and copying on paper requirements and test methods KS ISO 15489-1:2016 Kenya Standard — Information and documentation — Records management Part 1: Concepts and principles KS ISO 10244:2010 Kenya Standard — Document management — Business process baselining and analysis KS ISO 12651-2:2014 Kenya Standard — Electronic document management — Vocabulary — Part 2: Workflow management KS ISO 14533-1:2014 Kenya Standard — Processes data elements and documents in commerce industry and administration — Long term signature profiles — Part 1: Long term signature profiles for CMS advanced electronic signatures cades KS ISO 17369:2013 Kenya Standard — Statistical data and metadata exchange SDMX 26th August, 2022 THE KENYA GAZETTE KS ISO 18829:2017 Kenya Standard — Document management — Assessing ECM/EDRM implementations — Trustworthiness KS ISO 22938:2017 Kenya Standard — Document management — Electronic content document management (CDM) data interchange format KS ISO 5127:2017 Kenya Standard — Information and documentation — Foundation and vocabulary KS ISO/TR 15801:2017 Kenya Standard — Document management — Electronically stored information recommendations for trustworthiness and reliability KS ISO/TR 18159:2015 Kenya Standard — Document management — Environmental and work place safety regulations affecting micro film processors KS ISO/IEC 17021-2:2016 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 2: Competence requirements for auditing and certification of environmental management systems KS ISO IEC/TS 17021-4:2013 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management systems KS ISO IEC/TS 17021-5:2015 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 5: Competence requirements for auditing and certification of asset management systems KS ISO IEC/TS 17021-6:2015 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 6: Competence requirements for auditing and certification of business continuity management systems KS ISO IEC/TS 17021-7:2015 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 7: Competence requirements for auditing and certification of road traffic safety management systems KS ISO IEC/TS 17021-9:2016 Kenya Standard — Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 9: Competence requirements for auditing and certification of anti-bribery management systems KS ISO/IEC 17026:2015 Kenya Standard — Conformity Assessment — Example of a certification scheme for tangible products KS ISO/TR 14049:2012 Kenya Standard — Environmental management — Life cycle assessment — Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis KS ISO 14001:2015 Kenya Standard — Environmental management systems — Requirements with guidance for use services environmental management KS ISO 14004:2016 Kenya Standard — Environmental management systems — General guidelines on implementation services environmental management KS ISO 10993-17:2002 Kenya Standard — Biological evaluation of medical devices — Part 17: Establishment of allowable limits for leachable substances KS ISO 10993-6:1994 Kenya Standard — Biological evaluation of medical devices — Part 6: Tests for local effects after implantation KS ISO 10993-14:2001 Kenya Standard — Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics KS ISO 10993-17:2002 Kenya Standard — Biological evaluation of medical devices — Part 17: Establishment of allowable limits for leachable substances KS ISO 3107:2011 Kenya Standard — Dentistry — Zinc oxide eugenol cements and zinc oxide non eugenol cements KS ISO 7885:2010 Kenya Standard — Dentistry — Sterile injection needles for single use KS ISO 9687:2015 Kenya Standard — Dentistry — Graphical symbols for dental equipment KNWA 2409-10:2012 Kenya Standard — Health care wastes management commodities — Part 10: Gloves for healthcare waste handlin specifications KS 1737:2004 Kenya Standard — Safe use of X rays in medical diagnosis — Code of practice KS 2093-1:2007 Kenya Standard — Hearing protectors — Specification — Part 1: Ear muffs KS 2094:2007 Kenya Standard — Accident action pack for personal and Public Service Vehicles (PSV) — Specification KS ISO 4591:1992 Kenya Standard — Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll by gravimetric techniques gravimetric thickness KS ISO 1043-3:2016 Kenya Standard — Plastics — Symbols and abbreviated terms — Part 3: Plasticizers KS ISO 19496-1:2017 Kenya Standard — Vitreous and porcelain enamels — Terminology — Part 1: Terms and definitions KS ISO 19496-2:2017 Kenya Standard — Vitreous and porcelain enamels — Terminology — Part 2: Visual representations and descriptions KS ISO 22609:2004 Kenya Standard — Clothing for protection against infectious agents — Medical face masks — Test method for resistance against penetration by synthetic blood fixed volume horizontally projected KS ISO 7998:2005 Kenya Standard — Ophthalmic optics — Spectacle frames — Lists of Equivalent terms and vocabulary KS ISO 11193-2:2006 Kenya Standard — Single use medical examination gloves — Part 2: Specification for gloves made from poly vinyl chloride KS ISO 5362:2006 Kenya Standard — Anaesthetic reservoir bags KS IEC 60601-1:2012 Kenya Standard — Medical electrical equipment — Part 1: General requirements for basic safety and essential performance KS ISO 5832-6:1997 Kenya Standard — Implants for surgery — Metallic materials — Part 6: Wrought cobalt nickel chromium molybdenum alloy KS OIML R 114:1995 Kenya Standard — Clinical electrical thermometers for continuous measurement KS OIML R 115:1995 Kenya Standard — Clinical electrical thermometers with maximum device KS 2462-2:2015 Kenya Standard — Hospital beds — Specification — Part 2: Paediatric baby cots 6834 6834 KS ISO 20126:2012 Kenya Standard — Dentistry — Manual toothbrushes — General requirements and test methods KS ISO 16408:2015 Kenya Standard — Dentistry — Oral care products — Oral rinses KS ISO 13485:2016 Kenya Standard — Medical devices — Quality management systems — Requirements for regulatory purposes KS ISO 16409:2016 Kenya Standard — Dentistry — Oral care products — Manual interdental brushes KS ISO 7740:1985 Kenya Standard — Instruments for surgery scalpels with detachable blades — Fitting dimensions KS ISO 7741:1986 Kenya Standard — Instruments for surgery scissors and shears — General requirements and test methods KS ISO 15747:2010 Kenya Standard — Plastic containers for intravenous injections KS ISO 20126:2012 Kenya Standard — Dentistry — Manual toothbrushes — General requirements and test methods KS ISO 13485:2016 Kenya Standard — Medical devices — Quality management systems — Requirements for regulatory purposes KS ISO 22413:2010 Kenya Standard — Transfer sets for pharmaceutical preparations — Requirements and test methods KS ISO 3107:20011 Kenya Standard — Dentistry — Zinc oxide eugenol cements and zinc oxide non eugenol cements KS ISO 10993-6:1994 Kenya Standard — Biological evaluation of medical devices — Part 6: Tests for local effects after implantation KS ISO 10993-14:2001 Kenya Standard — Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics KS ISO 7151:1988 Kenya Standard — Surgical Instruments — Non cutting articulated Instruments — General requirements and test methods KS ISO 23500-1:2019 Kenya Standard — Preparation and quality management of fluids for haemodialysis and related therapies — Part 1: General requirements KS ISO 23500-2:2019 Kenya Standard — Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies KS ISO 23500-3:2019 Kenya Standard — Preparation and quality management of fluids for haemodialysis and related therapies — Part 3: Water for haemodialysis and related therapies KS ISO 23500-4:2019 Kenya Standard — Preparation and quality management of fluids for haemodialysis and related therapies — Part 4: Concentrates for haemodialysis and related therapies KS ISO 23500-5:2019 Kenya Standard — Preparation and quality management of fluids for haemodialysis and related therapies — Part 5: Quality of dialysis fluid for haemodialysis and related therapies KS 1955:2007 Kenya Standard — Radiation protection in dentistry — Code of practice KS 2670:2017 Kenya Standard — Nutrition and dietetics clinics — Code of practice KS ARS 950:2016 Kenya Standard — African Traditional Medicine — Terms and terminology KS ARS 953:2016 Kenya Standard — Traditional African Medicine — Certification scheme for medicinal plant produce KS ARS 955:2016 Kenya Standard — African Traditional Medicine — Technical guidelines for safety efficacy and quality of raw materials and herbal medicines KS ISO 19465:2017 Kenya Standard — Traditional Chinese Medicine — Categories of Traditional Chinese Medicine (TCM) clinical terminological systems KS ISO 19824:2017 Kenya Standard — Traditional Chinese Medicine — Schisandra Chinensis Turcz Baill seeds and seedlings KS ISO 20311:2017 Kenya Standard — Traditional Chinese Medicine — Salvia Miltiorrhiza seeds and seedlings KS ISO 20408:2017 Kenya Standard — Traditional Chinese Medicine — Panax Notoginseng seeds and seedlings KS ISO 20409:2017 Kenya Standard — Traditional Chinese Medicine — Panax Notoginseng root and rhizome KS ISO 8583-1:2003 Kenya Standard — Financial transaction card originated messages interchange message specifications — Part 1: Messages data elements and code values KS ISO 8583-2:1998 Kenya Standard — Financial transaction card originated messages interchange message specifications — Part 2: Application and registration procedures for Institution Identification Codes (IIC) KS ISO 8583-3:2003 Kenya Standard — Financial transaction card originated messages interchange message specifications — Part 3: Maintenance procedures for messages data elements and code values KS ISO 16609:2012 Kenya Standard — Financial services requirements for message authentication using symmetric techniques KS ISO 13491-1:2016 Kenya Standard — Financial services secure cryptographic devices retail — Part 1: Concepts requirements and evaluation methods KS ISO 9564-4:2016 Kenya Standard — Financial services personal identification number pin management and security — Part 4: Requirements for pin handling in ecommerce for payment transactions KS ISO 12812-1:2017 Kenya Standard — Core banking mobile financial services — Part 1 General framework KS ISO 20038:2017 Kenya Standard — Financial services banking and related financial services key wrap using aes KS ISO/TR 21941:2017 Kenya Standard — Financial services third party payment service providers KS ISO/TS 12812-5:2017 Kenya Standard — Core banking mobile financial services — Part 5 Mobile payments to businesses KS ISO/TS 12812-2:2017 Kenya Standard — Core banking mobile financial services — Part 2 Security and data protection for mobile financial services KS ISO/TS 12812-3:2017 Kenya Standard — Core banking mobile financial services — Part 3 Financial application lifecycle management 26th August, 2022 THE KENYA GAZETTE KS ISO/TS 12812-4:2017 Kenya Standard — Core banking mobile financial services — Part 4 Mobile payments to persons The following standards are withdrawn forthwith; Food KS ISO 3103:1980 Kenya Standard — Tea — Preparation of liquor for use in sensory tests, to be replaced by KS ISO 3103:2019 KS EAS 478-2:2008 Kenya Standard — Microbiology of food and animal feeding stuffs horizontal method for the enumeration of coagulase positive staphylococci staphylococcus aureus and other species — Part 2: Method using rabbit plasma fibrinogen agar medium, to be replaced by KS ISO 6888-2:2021 KS EAS 478-3:2008 Kenya Standard — Microbiology of food and animal feeding stuffs horizontal method for the enumeration of coagulase positive staphylococci staphylococcus aureus and other species — Part 3: Detection and MPN technique, to be replaced by KS ISO 6888-3:2003 KS EAS 451-1:2007 Kenya Standard — Microbiology of food and animal feeding stuffs horizontal method for the detection and enumeration of listeria monocytogenes — Part 1: Detection method, to be replaced by KS ISO 11290-1:2017 KS EAS 451-2:2007 Kenya Standard — Microbiology of food and animal feeding stuffs horizontal method for the detection and enumeration of listeria monocytogenes — Part 2: Enumeration method, to be replaced by KS ISO 11290-2:2017 KS ISO 16140:2003 Kenya Standard — Microbiology of food and animal feeding stuffs protocol for the validation of alternative methods, to be replaced by KS ISO 16140-1:2016 and KS ISO 16140-2:2016 KS ISO 17410:2001 Kenya Standard — Microbiology of food and animal feeding stuffs horizontal method for the enumeration of psychotropic microorganisms, to be replaced by KS ISO 17410:2019 KS ISO 18593:2004 Kenya Standard — Microbiology of food and animal feeding stuffs horizontal methods for sampling techniques from surfaces using contact plates and swabs, to be replaced by KS ISO 18593:2018 KS ISO 21807:2004 Kenya Standard — Microbiology of food and animal feeding stuffs determination of water activity, to be replaced by KS ISO 18787-2017 KS 1517:2017 Kenya Standard — Dairy based desserts — Specification, to be replaced by KS 1517:2022 KS 703:1993 Kenya Standard — Specification for reconstituted pasteurized milk, to be replaced by KS 703:2022 KS 1311:2017 Kenya Standard — Canned (baked) beans in tomato sauce — Specification, to be replaced by KS 1311:2022 KS EAS 827:2016 Kenya Standard — Fresh and frozen whole fin fish — Specification, to be replaced by KS EAS 827:2022 KS EAS 830:2016 Kenya Standard — Frozen fish sticks (fish fingers), fish portions — Specification, to be replaced by KS EAS 830:2022 KS EAS 831:2016 Kenya Standard — Frozen fish fillets — Specification, to be replaced by KS EAS 831:2022 KS EAS 832:2016 Kenya Standard — Fish industry — Operational cleanliness, to be replaced by KS EAS 832:2022 KS EAS 833:2016 Kenya Standard — Processing and handling of dried fish, to be replaced by KS EAS 833:2022 KS EAS 834:2016 Kenya Standard — Processing and handling of salted fish, to be replaced by KS EAS 834:2022 Agriculture KS ISO 11132:2012 Kenya Standard — Sensory analysis — Methodology — Guidelines for monitoring the performance of a quantitative sensory panel, to be replaced by KS ISO 11132:2021 KS 592:2000 Kenya Standard — Cigarettes — Specification, to be replaced by KS EAS 110:2022 KS EAS 47:2000 Kenya Standard — Fresh papaya — Specification, to be replaced by KS EAS 47:2022 KS EAS 56:2000 Kenya Standard — Fresh mushrooms — Specification, to be replaced by KS EAS 56:2022 KS EAS 330:2002 Kenya Standard — Citrus — Specification, to be replaced by KS EAS 330:2022 KS EAS 286-1:2002 Kenya Standard — Fresh cut flower and cut foliage — Specification — Part 1: Fresh cut foliage, to be replaced by KS EAS 286-1:2022 KS EAS 332:2002 Kenya Standard — Fresh chill peppers — Specification, to be replaced by KS EAS 332:2022 KS EAS 741:2010 Kenya Standard — Cassava wheat composite flour — Specification, to be replaced by KS EAS 741:2022 KS EAS 742:2010 Kenya Standard — Food grade cassava starch — Specification, to be replaced by KS EAS 742:2022 Chemical KS ISO 4320:1977 Kenya Standard — Non ionic surface active agents determination of cloud point index volumetric method, to be replaced by KS ISO 4320:1997 KS ISO 5667-11:1993 Kenya Standard — Water quality — Sampling — Part 11: Guidance on sampling of groundwaters, to be replaced by KS ISO 5667- 11:2009 KS ISO 5667-12:1995 Kenya Standard — Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments, to be replaced by KS ISO 5667- 12:2017 KS ISO 5667-13:1997 Kenya Standard — Water quality — Sampling — Part 13: Guidance on sampling of sludges from sewage and water treatment works, to be replaced by KS ISO 5667-13:2011 KS ISO 5667-14:1998 Kenya Standard — Water quality — Sampling — Part 14: Guidance on quality assurance of environmental water sampling and handling, to be replaced by KS ISO 5667-14:2014 KS ISO 5667-15:1999 Kenya Standard — Water quality — Sampling — Part 15: guidance on preservation and handling of sludge and sediment samples, to be replaced by KS ISO 5667-15:2009 KS ISO 5667-16:1998 Kenya Standard — Water quality — Sampling — Part 16: guidance on biotesting of samples, to be replaced by KS ISO 5667-16:2017 KS ISO 5667-17:2000 Kenya Standard — Water quality — Sampling — Part 17: Guidance on sampling of suspended sediments, to be replaced by KS ISO 5667- 17:2008 KS ISO 5667-4:1987 Kenya Standard — Water quality — Sampling — Part 4: Guidance on sampling from lakes, natural and man-made, to be replaced by KS ISO 5667-4:2016 6836 6836 KS ISO 5667-5:1999 Kenya Standard — Water quality — Sampling — Part 5: Guidance on the sampling of drinking water and water used for food and beverage processing, to be replaced by KS ISO 5667- 5:2006 KS ISO 6461-2:1986 Kenya Standard — Specification for water quality — detection and enumeration of the spores of sulfite reducing anaerobes clostridia — Part 2: Method by membrane filtration, to be replaced by KS ISO 6461-2:1999 KS ISO 6461-1:1986 Kenya Standard — Specification for water quality — Detection and enumeration of the spores of sulfite reducing anaerobes clostridia — Part 1: Method by enrichment in a liquid medium, to be replaced by KS ISO 6461-1:1999 KS ISO 6468:1996 Kenya Standard — Water quality — Determination of certain organochlorine insecticides polychlorinated biphenyl and chlorobenzenes gas chromatographic method after liquid liquid extraction, to be replaced by KS ISO 6468:1999 KS ISO 7393-2:1985 Kenya Standard — Water quality — Detection of free chlorine and total chlorine — Part 2: Colorimetric method using N, N-Diethyl 1 4 phenylenediamine for routine control purposes, to be replaced by KS ISO 7393-2:2017 KS ISO 7899-1:1998 Kenya Standard — Specification for water quality — Detection and enumeration of faecal streptococci — Part 1: Method by enrichment in a liquid medium, to be replaced by KS ISO 7899-1:1999 KS ISO 9509:1989 Kenya Standard — Water quality — Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste waters, to be replaced by KS ISO 9509:2006 KS ISO 9562:1998 Kenya Standard — Water quality — Determination of adsorbable organically bound halogens (AOX), to be replaced by KS ISO 9562:2004 KS ISO 10523:1994 Kenya Standard — Water quality — Determination of pH, to be replaced by KS ISO 10523:2008 KS ISO 10301:1997 Kenya Standard — Water quality — Determination of high volatile halogenated hydrocarbons gas chromatographic methods, to be replaced by KS ISO 10301:1999 KS ISO 11423-1:1997 Kenya Standard — Water quality — Determination of benzene and some derivative — Part 1: Head space gas chromatographic method, to be replaced by KS ISO 11423- 1:1999 KS ISO 11423-2:1997 Kenya Standard — Water quality — Determination of benzene and some derivative — Part 2: Method using extraction and gas chromatography, to be replaced by KS ISO 11423-2:1999 KS ISO 5667-1:1980 Kenya Standard — Water quality — Sampling — Part 1: Guidance on the design of sampling programmes, to be replaced by KS ISO 5667- 1:2020 KS ISO 5667-3:2003 Kenya Standard — Water quality — Sampling — Part 3: Guidance on the preservation and handling of water samples, to be replaced by KS ISO 5667-3:2018 KS ISO 5667-6:2005 Kenya Standard — Water quality — Sampling — Part 6: Guidance on sampling of rivers and streams, to be replaced by KS ISO 5667-6:2014 KS ISO 5667-10:1992 Kenya Standard — Water quality — Sampling — Part 10: Guidance on sampling of waste waters, to be replaced by KS ISO 5667-10:2020 KS ISO 7393-2:1985 Kenya Standard — Water quality — Detection of free chlorine and total chlorine — Part 2: Colorimetric method using N, N-Diethyl 1 4 phenylenediamine for routine control purposes, to be replaced by KS ISO 7393-2:2017 KS ISO 10703:1997 Kenya Standard — Water quality — Determination of the activity concentration of radionuclides by high resolution gamma ray spectrometry, to be replaced by KS ISO 10703:2021 KS ISO 11260:1994 Kenya Standard — Soil quality — Determination of effective cation exchange capacity and base saturation level using barium chloride solution, to be replaced by KS ISO 11260:2018 KS ISO 15800:2003 Kenya Standard — Soil quality — Characterization of soil with respect to human exposure, to be replaced by KS ISO 15800:2019 KS 1846:2007 Kenya Standard — Rubber bands — Specification, to be replaced by KS ISO 22843:2020 KS ISO 8789:1994 Kenya Standard — Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification, to be replaced by KS ISO 13775-1:2021 KS ISO 556:1980 Kenya Standard — Coke (greater than 20 mm in size) — determination of mechanical strength, to be replaced by KS ISO 556:2020 KS ISO 622:1981 Kenya Standard — Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method, to be replaced by KS ISO 622:2016 KS ISO 1213-2:1992 Kenya Standard — Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis, to be replaced by KS ISO 1213-2:2016 KS ISO 334:1992 Kenya Standard — Coal and coke — Determination of total sulfur — Eschka method, to be replaced by KS ISO 334:2020 KS ISO 1013:1995 Kenya Standard — Coke — Determination of bulk density in a large container, to be replaced by KS ISO 1013:2020 KS ISO 587:1997 Kenya Standard — Coal and coke — Determination of chlorine using Eschka mixture, to be replaced by KS ISO 587:2020 KS ISO 925:1997 Kenya Standard — Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method, to be replaced by KS ISO 925:2019 KS ISO 15590-1:2001 Kenya Standard — Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends, to be replaced by KS ISO 15590-1:2018 KS ISO 15590-2:2003 Kenya Standard — Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline, to be replaced by KS ISO 15590- 2:2021 KS 91:1985 Kenya Standard — Specification for liquefied petroleum gases (LPG), to be replaced by KS 91:2022 KS 2227:2010 Kenya Standard — Petroleum and petroleum products — Automotive biodiesel fuel — Specification, to be replaced by 2227:2022 Leather and Textile KS ISO 10361:1990 Kenya Standard — Textile floor coverings — Production of changes in appearance by means 26th August, 2022 THE KENYA GAZETTE of Vettermann drum and hexapod tumbler tester, to be replaced by KS ISO 10361:2015 KS 675:1987 Kenya Standard — Specification for chromed crust bovine leather, to be replaced by KS 675:2017 KS ISO 3071:2005 Kenya Standard — Textiles — Determination of pH of aqueous extract, to be replaced by KS ISO 3071:2020. KS 779-2:1990 Kenya Standard — Specification for carpets — Part 2: Sisal carpets. To be replaced by KS 779- 2:2022 KS 606:1993 Kenya Standard — Polyester and cotton blended bedsheets — Specification, to be replaced by KS 606:2022 KS 559-1:2019 Kenya Standard — Mens’ and boys’ trousers — Specification — Part 1: Making up requirements, to be replaced by KS 559-1:2022 KS KS 414-1:1982 Kenya Standard — Specification for school wear for boys and girls — Part 1: Requirements for making school wear, to be replaced by KS 414:2022 KS 115:1979 Kenya Standard — Methods for determination of resistance to abrasion of fabrics, to be replaced by KS ISO 12947-1:1998, KS ISO 12947-2:2016, KS ISO 12947-3:1998 and KS ISO 12947-4:1998 Engineering KS ISO 3807-2:2000 Kenya Standard — Cylinders for acetylene — Basic requirements — Part 2: Cylinders with fusible plugs, to be replaced by KS ISO 3807:2013 KS ISO 1496-2:1996 Kenya Standard — Series 1 freight containers — Specification and testing — Part 2: Thermal containers, to be replaced by KS ISO 1496- 2:2018 KS ISO 1496-3:1995 Kenya Standard — Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids gases and pressurized dry bulk, to be replaced by KS ISO 1496-3:2019 KS ISO 1496-5:1991 Kenya Standard — Series 1 freight containers — Specification and testing — Part 5: Platform and platform based containers, to be replaced by KS ISO 1496-5:2018 KS ISO 15069:1997 Kenya Standard — Series 1 freight containers — Handling and securing rationale for KS ISO 3874 Annex A, to be replaced by KS ISO/TR 15069:2018 KS ISO 15070:1996 Kenya Standard — Series 1 freight containers — Rationale for structural test criteria, to be replaced by KS ISO/TR 15070:1996 KS ISO 6621-1:1986 Kenya Standard — Internal combustion engines — Piston rings — Part 1: Vocabulary, to be replaced by KS ISO 6621-1:2018 KS ISO 6621-5:1988 Kenya Standard — Internal combustion engines — Piston rings — Part 5: Quality requirements, to be replaced by KS ISO 6621-5:2020 KS ISO 2344:1999 Kenya Standard — Specification for road vehicles m14 x 1 25 spark plugs with conical seating and their cylinder head housing, to be replaced by KS ISO 2344:1998 KS ISO 15500-1:2000 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 1: General requirements and requirements, to be replaced by KS ISO 15500-17:2021 KS ISO 6621-3:2000 Kenya Standard — Internal combustion engines — Piston rings — Part 3: Material specifications, to be replaced by KS ISO 6621- 3:2021 KS ISO 6627:2000 Kenya Standard — Internal combustion engines — Piston rings expander segment oil control, to be replaced by KS ISO 6627:2011 KS ISO 15500-15:2001 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components Part 15: Gas tight housing and ventilation hose, to be replaced by KS ISO 15500-15:2015 KS ISO 6624-1:2001 Kenya Standard — Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron, to be replaced by KS ISO 6624- 1:2017 KS ISO 6624-3:2001 Kenya Standard — Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel, to be replaced by KS ISO 6624-3:2017 KS ISO 6621-2:2003 Kenya Standard — Internal combustion engines — Piston rings — Part 2: Inspection measuring principles, to be replaced by KS ISO 6621- 2:2020 KS ISO 6621-4:2003 Kenya Standard — Internal combustion engines — Piston rings — Part 4: General specifications, to be replaced by KS ISO 6621- 4:2015 KS ISO 6622-1:2003 Kenya Standard — Internal combustion engines — Piston rings — Part 1: Rectangular rings made of cast iron, to be replaced by KS ISO 6622-1:2021 KS ISO 6622-2:2003 Kenya Standard — Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel, to be replaced by KS ISO 6622- 2:2013 KS ISO 6624-2:2003 Kenya Standard — Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron, to be replaced by KS ISO 6624-2:2016 KS ISO 6624-4:2003 Kenya Standard — Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel, to be replaced by KS ISO 6624- 4:2016 KS ISO 6626-2:2003 Kenya Standard — Internal combustion engines — Piston rings — Part 2: Coil spring loaded oil control rings of narrow width made of cast iron, to be replaced by KS ISO 6626-2:2013 KS ISO 18669-1:2004 Kenya Standard — Internal combustion engines — Piston pins — Part 1: General specifications, to be replaced by KS ISO 18669- 1:2021 KS ISO 6623:2004 Kenya Standard — Internal combustion engines — Piston rings scraper rings made of cast iron, to be replaced by KS ISO 6623:2013 KS ISO 15500-20:2007 Kenya Standard — Road Vehicles — Compressed Natural Gas (CNG) fuel system components — Part 20: Rigid fuel line in material other than stainless steel, to be replaced by KS ISO 15500-20:2015 KS ISO 8936:2007 Kenya Standard — Awnings for leisure — Accommodation vehicles — Requirements and test methods, to be replaced by KS ISO 8936:2017 KS ISO 15500-14:2012 Kenya Standard — Road Vehicles — Compressed Natural Gas (CNG) fuel system components — Part 14: Excess flow valve, to be replaced by KS ISO 15500-14:2020 KS ISO 15500-16:2012 Kenya Standard — Road Vehicles — Compressed Natural Gas (CNG) fuel system components — Part 16: Rigid fuel line in 6838 6838 stainless steel, to be replaced by KS SO 15500- 16:2020 KS ISO 15500-18:2012 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 18: Filter, to be replaced by KS ISO 15500-18:2020 KS ISO 15500-19:2012 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 19: Fittings, to be replaced by KS ISO 15500-19:2020 KS ISO 15500-2:2012 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 2: Performance and general test methods, to be replaced by KS ISO 15500- 2:2016 KS ISO 15500-3:2012 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 5: Manual cylinder valve, to be replaced by KS ISO 15500-3:2020 KS ISO 15500-4-2012 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 3: Check valve, to be replaced by KS ISO 15500-4:2020 KS ISO 15500-5:2012 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 3: Check valve, to be replaced by KS ISO 15500-5:2020 KS ISO 15500-6:2012 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 6: Automatic valve, to be replaced by KS ISO 15500-6:2020 KS ISO 15500-9:2012 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) Fuel system components — Part 9: Pressure regulator, to be replaced by KS ISO 15500-9:2020 KS ISO 23274-2:2012 Kenya Standard — Hybrid electric road vehicles — Exhaust emissions and fuel consumption measurements — Part 2: Externally chargeable vehicles, to be replaced by KS ISO 23274-2:2021 KS ISO 4548-6:2012 Kenya Standard — Methods of test for full flow lubricating oil filters for internal combustion engines — Part 6: Static burst pressure test, to be replaced by KS ISO 4548-6:2021 KS ISO 15500-12:2001 Kenya Standard — Road vehicles — Compressed Natural Gas (CNG) fuel system components — Part 12: Pressure relief valve Prv, to be replaced by KS ISO 15500:12 2021 KS ISO 23274-1:2013 Kenya Standard — Hybrid electric road vehicles — Exhaust emissions and fuel consumption measurements — Part 1: Non- externally chargeable vehicles, to be replaced by KS ISO 23274-1:2019 KS ISO 4548-5:2013 Kenya Standard — Methods of test for full flow lubricating oil filters for internal combustion engines — Part 5: Test for cold start simulation and hydraulic pulse durability, to be replaced by KS ISO 4548-5:2020 KS ISO 17409:2015 Kenya Standard — Electrically propelled road vehicles — Connection to an external electric power supply safety requirements, to be replaced by KS ISO 17409:2020 KS ISO 28981:2009 Amd 1:2015 Kenya Standard — Mopeds — Methods for setting the running resistance on a chassis dynamometer, AMENDMENT 1, to be replaced by KS ISO 28981:2009 AMD 1:2015 KS ISO 2575:2012 Kenya Standard — Road vehicles — Mopeds — Symbols for controls indicators and tell tales, to be replaced by KS ISO 2575:2021 KS ISO 9021:1988 Kenya Standard — Motorcycles — Control types, positions and functions, to be replaced by KS ISO 9021:2021 KS ISO 12353-1:2002 Kenya Standard — Road vehicles — Traffic accident analysis — Part 1: Vocabulary, to be replaced by KS SO 12353-1:2020 KS ISO 13325:2003 Kenya Standard — Tyres — Coast by methods for measurement of tyre to road sound emission, to be replaced by KS ISO 13325:2019 KS ISO 15005:2002 Kenya Standard — Road vehicles — Ergonomic aspects of transport information and control systems dialogue management principles and compliance procedures, to be replaced by KS ISO 15005:2017 KS ISO 15037-1:2006 Kenya Standard — Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars, to be replaced by KS ISO 15037-1:2019 KS ISO 1585:1992 Kenya Standard — Road vehicles — Engine test code net power, to be replaced by KS ISO 1585:2020 KS ISO 1728:1980 Kenya Standard — Road vehicles — Pneumatic braking connections Between Motor Vehicles and towed Vehicles interchangeability, to be replaced by KS ISO 1728:2006 KS ISO 2575:2010 Kenya Standard — Road vehicles — Symbols for controls indicators and tell tales, to be replaced by KS ISO 2575:2021 KS ISO 9413:1998 Kenya Standard — Tyre valves — Dimensions and designation, to be replaced by KS ISO 9413:2019 KS ISO/TS 22391-1:2007 Kenya Standard — Plastics piping systems for hot and cold water installations —- Polyethylene of raised temperature resistance (PE-RT) — Part 1: General, to be replaced by the KS ISO/TS 22391-1:2009 KS 261:2019 Kenya Standard — Steel wires and wire products used for fencing — Specification, to be replaced by KS EAS 135:2021 Electrotechnical KS IEC/TR 62914:2014 Kenya Standard — Secondary cells and batteries containing alkaline or other non-acid electrolytes — Experimental procedure for the forced internal short-circuit test of IEC 62133:2012, withdrawn by IEC on 2021-04-09 KS 41-3:1977 Kenya Standard — Glossary of terms related to electrochemistry and electrometallurgy trade — Part 3 Secondary cells and batteries, to be replaced by KS IEC 60050-482:2004 KS IEC 60094-8:1987 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 8: Eight track magnetic tape cartridge for commercial tape records and domestic use, withdrawn without replacement (1997-11-21) KS IEC 60107-8:1997 Kenya Standard — Methods of measurement of receivers for television broadcast transmissions — Part 8: Measurements On D2 mac packet equipment, withdrawn without replacement (2008-03-04) KS IEC 60244-12-1:1989 Kenya Standard — Methods of measurement for radio transmitter — Part 12: Guidelines for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting — Section 1: Characteristics, withdrawn without replacement (2010-08-06) KS IEC 60244-12-2:1989 Kenya Standard — Methods of measurement for radio transmitter — Part 12: Guidelines for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting — Section 2: 26th August, 2022 THE KENYA GAZETTE Specification, withdrawn without replacement (2010-08-06) KS IEC 60847:1988 Kenya Standard — Characteristics of Local Area Networks (LAN), withdrawn without replacement (2004-02-05) KS IEC 61663-1:1999 Kenya Standard — Lightning protection telecommunication lines — Part 1: Fibre optic installations, withdrawn without replacement (2006-07-14) KS IEC 61663-2:2001 Kenya Standard — Lightning protection telecommunication lines — Part 1: Lines using metallic conductors, withdrawn without replacement (2006-07-14) KS IEC/CISPR 24:1999 Kenya Standard — Specification for immunity characteristics of information technology equipment limits and methods of measurement, withdrawn without replacement (2020-07-31) KS 1864:2010 Kenya Standard — Battery chargers performance, to be replaced by KS IEC 60335- 2-29:2016+AMD 1:2019 KS IEC 60952-1:2004 Kenya Standard — Aircraft batteries — Part 1: General test requirements and performance levels, to be replaced by KS IEC 60952-1:2013 KS IEC 60952-2:2004 Kenya Standard — Aircraft batteries — Part 2: Design and construction requirements, to be replaced by KS IEC 60952-2:2013 KS IEC 60952-3:2004 Kenya Standard — Aircraft batteries — Part 3: Product specification and declaration of design and performance (DDP), to be replaced by KS IEC 60952-3:2013 KS IEC 62040-1-1:2002 Kenya Standard — Uninterruptible power systems ups — Part 1-1: General and safety requirements for ups used in operator access areas and KS IEC 62040-1-2:2002 Kenya Standard — Uninterruptible power systems ups — Part 1-2: General and safety requirements for ups used in restricted access locations, to be replaced by KS IEC 62040-1:2017+AMD 1:2021 KS IEC 62040-2:1999 Kenya Standard — Uninterruptible power systems ups — Part 2: Electromagnetic Compatibility EMC Requirements, to be replaced by KS IEC 62040-2:2016 KS IEC 62040-3:1999 Kenya Standard — Uninterruptible power systems ups — Part 3: Method of specifying the performance and test requirements, to be replaced by KS IEC 62040-3:2021 KS IEC/TR 61044:2002 Kenya Standard — Opportunity charging of lead acid traction batteries, to be replaced by KS IEC TS 61044:2021 KS IEC/CISPR 15:2009 Kenya Standard — Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment, to be replaced by KS CISPR 15:2018 KS IEC/CISPR 16-1-1:2010 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-1: Radio disturbance and immunity measuring apparatus measuring apparatus, to be replaced by KS CISPR 16-1-1:2019 KS IEC/CISPR 16-1-2:2006 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-2: Radio disturbance and immunity measuring apparatus ancillary equipment conducted disturbances, to be replaced by KS CISPR 16-1-2:2014+AMD 1:2017 KS IEC/CISPR 16-1-5:2003 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 1 5: Radio disturbance and immunity measuring apparatus antenna calibration test sites for 30 Mhz to 1000 Mhz, to be replaced by KS CISPR 16-1-5: 2014+AMD 1:2016 KS IEC/CISPR 16-2-1:2008 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 2 1: Methods of measurements of disturbances and immunity conducted disturbance measurements, to be replaced by KS CISPR 16-2-1: 2014+AMD 1:2017 KS IEC/CISPR 16-2-2:2005 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-2: Methods of measurement of disturbances and immunity — Measurement of disturbance power, be replaced by KS CISPR 16-2-2: 2010 KS IEC/CISPR 16-2-3:2010 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-3: Methods of measurement of disturbances and immunity radiated disturbamce measurements, be replaced by KS CISPR 16-2-3: 2016+AMD 1:2019 KS CISPR 16-4-2:2003 Kenya Standard — Specification for radio disturbance and immunity measuring apparatus and methods — Part 4 2: Uncertainties statistics and limit modelling uncertainty in EMC measurements, to be replaced by KS CISPR 2011+AMD 1:2014+AMD 2:2018 KS 1503-2:1999 Kenya Standard — Glossary of terms relating to electromagnetic interference emi and electromagnetic compatibility EMC — Part 2: Electromagnetic compatibility terms, to be replaced by KS IEC 60050-161:1990 KS IEC 60065:2010 Kenya Standard — Audio, video and similar electronic apparatus — Safety requirements, to be replaced by KS IEC 60065:2014 KS 245:1985 Kenya Standard — Specification for processed disc records, to be replaced by KS IEC 60098:2020 KS IEC 60268-3:2000 Kenya Standard — Sound system equipment — Part 3: Amplifiers, to be replaced by KS IEC 60268-3:2018 KS IEC 60268-4:1997 Kenya Standard — Sound system equipment — Part 4: Microphones, to be replaced by KS IEC 60268-4:2018 KS IEC 60268-5:1989 Kenya Standard — Sound system equipment — Part 5: Loudspeakers, to be replaced by KS IEC 60268-5:2003+AMD 1:2007 KS IEC 60268-7:1996 Kenya Standard — Sound system equipment — Part 7: Headphones and earphones, to be replaced by KS IEC 60268-7:2010+AMD 1:2020 KS IEC 60268-16:1998 Kenya Standard — Sound system equipment — Part 16: Objective rating of speech intelligibility by speech transmission index, to be replaced by KS IEC 60268-16:2020 Title: KS IEC 60268-14:1980 Kenya Standard — Sound system equipment — Part 14: Circular and elliptical loudspeakers; outer frame diameters and mounting dimensions, withdrawn without replacement (2008-03-04) KS IEC 60958-1:2008 Kenya Standard — Digital audio interface — Part 1: General, to be replaced by KS IEC 60958-1:2021 KS IEC 60958-3:2009 Kenya Standard — Digital audio interface — Part 3: Consumer applications, to be replaced by KS IEC 60958-3:2021 KS IEC 61883-6:2005 Kenya Standard — Consumer audio video equipment digital interface — Part 6: Audio and music data transmission protocol, to be replaced by KS IEC 61883-6:2014 6840 6840 KS IEC 61883-8:2008 Kenya Standard — Consumer audio video equipment digital interface — Part 8: Transmission of Itu R Bt 601 style digital video data, to be replaced by KS IEC 61883- 8:2008+AMD 1:2014 KS IEC 62104:2003 Kenya Standard — Characteristics of dab receivers, to be replaced by KS IEC 62104:2015 KS IEC 60315-5:1971 Kenya Standard — Methods of measurement on radio receivers for various classes of emission — Part 5: Specialized radio frequency measurements measurement on frequency modulated receivers of the response to impulsive (The IEC Standard was withdrawn in 1998 without replacement) KS IEC 60315-7:1995 Kenya Standard — Methods of measurement on radio receivers for various classes of emission — Part 7: Methods of measurement on digital satellite radio (DSR) receivers (The IEC Standard was withdrawn in 1998 without replacement) KS IEC 60315-8:1975 Kenya Standard — Methods of measurement on radio receivers for various classes of emission — Part 8: Radio-frequency measurements on professional receivers for frequency-modulated telegraphy systems (The IEC Standard was withdrawn in 1998 without replacement) KS 62684:2011 Kenya Standard — Interoperability specifications of common external power supply EPS for use with data enabled mobili telephones, to be replaced by KS IEC 62684:2018 KS IEC 60094-3:1979 Kenya Standard — Magnetic tape sound recording and reproducing systems — Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape, to be replaced by KS IEC 60094-3:1979+AMD 2:1988 KS IEC 60268-12:1987 Kenya Standard — Sound system equipment — Part 12: Application of connectors for broadcast and similar use, to be replaced by KS IEC 60268-12:1987+AMD 1:1991 KS IEC 60774:1983 Kenya Standard — Helical scan video tape cassette system using 12 65 Mm 0 5 in magnetic tape on type VHS, to be replaced by KS IEC 60774-1:1994 KS IEC 60958-4:2008 Kenya Standard — Digital audio interface — Part 4: Professional applications, to be replaced by KS IEC 60958-4-1:2016, KS IEC 60958-4- 2:2016 and KS IEC 60958-4-4:2016 KS IEC 60315-9:1996 Kenya Standard — Methods of measurement on radio receivers for various classes of emission — Part 8: Radio-frequency measurements on professional receivers for frequency-modulated telegraphy systems, to be replaced by KS IEC 62634:2015 KS IEC CISPR 23:1999 Kenya Standard — Specification for radio disturbance characteristics of industrial scientific and medical equipment determination of limits, to be replaced by KS CISPR/TR 16-4- 4:2020 KS IEC CISPR 21:1999 Kenya Standard — Interference to mobile radio communications in the presence of impulsive noise — Methods of judging degradation and measures to improve performance, to be replaced by KS CISPR 25:2021 KS IEC 60332-3-21: 2000 Kenya Standard — Tests on electric cables under fire conditions — Part 3-21: Test for vertical flame spread of vertically mounted bunched wires or cables — Category A F/R, to be replaced by KS IEC 60332-3-21:2018 KS 191-1:1987 Kenya Standard — Specification for test on electric cables under fire conditions — Part 1: Test on single vertical insulated wire or cable, to be replaced by KS IEC 60332-1-1:2015, KS IEC 60332-1-2:2015 and KS IEC 60332-1- 3:2015 KS 314-1:1982 Kenya Standard — Specification for cables for vehicles — Part 1: Cables with copper conductors, to be replaced by KS ISO 19642 Parts 1-10 series of standards KS 633:1986 Kenya Standard — Specification for electric toasters, to be replaced by KS IEC 60335-2- 9:2019 KS 277:1980 Kenya Standard — Specification for electric kettles for household and similar use, to be replaced by KS IEC 60335-2-15:2012+AMD 1:2016+AMD 2:2018 KS IEC 60730-2-16:1997 Kenya Standard — Automatic electrical controls for household and similar use — Part 2 16: Particular requirements for automatic electrical water level operating controls of the float type for household and similar App, withdrawn without replacement KS IEC 60730-2-17:2001 Kenya Standard — Automatic electrical controls for household and similar use — Part 2 17: Particular requirements for electrically operated gas valves including mechanical requirements, withdrawn without replacement KS IEC 60730-2-18:1997 Kenya Standard — Automatic electrical controls for household and similar use — Part 2 18: Particular requirements for automatic electrical water and air flow sensing controls including mechanical requirements, withdrawn without replacement KS IEC 60730-2-19:2001 Kenya Standard — Automatic electrical controls for household and similar use — Part 2 19: Particular requirements for electrically operated oil valves including mechanical requirements, withdrawn without replacement KS IEC 60335-2-67:2016 Kenya Standard — Household and similar electrical — Part 2-67: Particular requirements for floor treatment machines, for commercial use appliances — Safety, to be replaced by KS IEC 60335-2 67:2021 KS IEC 60079-10:1995 Kenya Standard — Electrical apparatus for explosive gas atmospheres — Part 10: Classification of hazardous areas, to be replaced by KS IEC 60079-10-1:2020 KS IEC 61000-4.1:2001 Kenya Standard — Electromagnetic Compatibility (EMC) — Part 4 1: Testing and measurement techniques overview of KS IEC 61000-4 series, to be replaced by KS IEC/TR 61000-4-1:2016 KS IEC 61000-4.2:2001 Kenya Standard — Electromagnetic Compatibility (EMC) — Part 4 2: Testing and measurement techniques electrostatic discharge immunity test, to be replaced by KS IEC 61000- 4-2:2008 KS IEC 61000-4.3:2002 Kenya Standard — Electromagnetic Compatibility (EMC) — Part 4 3: Testing and measurement techniques radiated radio frequency electromagnetic field immunity test, to be replaced by KS IEC 61000-4-3:2020 KS IEC 61000-4.4:2004 Kenya Standard — Electromagnetic Compatibility (EMC) — Part 4 4: Testing and measurement techniques electrical dast transient burst immunity test, to be replaced by KS IEC 61000-4-4:2012 KS IEC 61000-4.5:2001 Kenya Standard — Electromagnetic Compatibility (EMC) — Part 4 5: Testing and measurement techniques surge immunity test, to be replaced by KS IEC 61000-4-5:2014+AMD 1:2017 KS IEC 61000-4.6:2004 Kenya Standard — Electromagnetic Compatibility (EMC) — Part 4 6: Testing and 26th August, 2022 THE KENYA GAZETTE measurement techniques immunity to conducted disturbances induced by radio frequency fields, to be replaced by KS IEC 61000-4-6:2013 KS IEC/TS 62370:2004 Kenya Standard — Electroacoustics instruments for the measurement of sound intensity electromagnetic compatibility requirements and test procedures, to be replaced by KS IEC/TS 62370:2004+AMD 1:2017 KS IEC 60076-3:2013 Kenya Standard — Power transformers — Part 3: Insulation levels, dielectric tests and external clearances in air, to be replaced with KS IEC 60076-3:2013+AMD 1:2018 KS IEC 60076-15:2008 Kenya Standard — Power transformers — Part 15: Gas-filled power transformers; to be replaced by KS IEC 60076-15:2015 KS IEC 62208:2002 Kenya Standard — Empty enclosures for low- voltage switchgear and controlgear assemblies — General requirements, to be replaced by KS IEC 62208:2015 KS IEC 60034-1:2010 Kenya Standard — Rotating electrical machines — Part 1: Rating and performance, to be replaced by KS IEC 60034-1:2022 KS IEC 60269-2:2010 Kenya Standard — Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Examples of standardized systems of fuses A to K, to be replaced by KS IEC 60269-2:2016 KS IEC 60269-3:2010 Kenya Standard — Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) — Examples of standardized systems of fuses A to F, to be replaced by KS IEC 60269-3:2019 KS IEC 60269-4:2009 Kenya Standard — Low-voltage fuses — Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices; to be replaced by IEC 60269-4:2016 KS IEC 62056-3-1:2013 Kenya Standard — Electricity metering data exchange — The DLMS/COSEM suite — Part 3-1: Use of local area networks on twisted pair with carrier signalling, to be replaced by KS IEC 62056-3-1:2021 KS IEC 62056-6-1:2015 Kenya Standard — Electricity metering data exchange — The DLMS/COSEM suite — Part 6-1: Object Identification System (OBIS), to be replaced by KS IEC 62056-6-1:2017 KS IEC 61558-2-6:1999 Kenya Standard — Safety of transformers, reactors, power supply units and combinations thereof — Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general applications, to be replaced by KS IEC 61558-2-6:2021 KS IEC 61558-2-16:2009 + Amd 1:2013 Kenya Standard — Safety of transformers, reactors, power supply units and combinations thereof — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications; to be replaced by KS IEC 61558-2-16:2021 KS IEC 61558-2-20:2000 Kenya Standard — Safety of transformers, reactors, power supply units and combinations thereof — Part 2-20: Particular requirements and tests for small reactors, to be replaced by KS IEC 61558-2-20:2010. KS IEC 44-6:1992 Kenya Standard — Instrument transformers — Part 6: Requirements for protective current transformers for transient performance; to be replaced by KS IEC 61869-2:2012 KS IEC 60044-1:2003 Kenya Standard — Instrument transformers — Part 1: Current transformers, to be replaced by KS IEC 61869-2:2012 KS IEC 60044-3:2002 Kenya Standard — Instrument transformers — Part 3: Combined transformers; to be replaced by KS IEC 61869-4:2013 KS IEC 60044-5:2004 Kenya Standard — Instrument transformers — Part 5: Capacitor voltage transformers, to be replaced by KS IEC 61869-5:2011 KS IEC 60715:1981 Kenya Standard — Dimensions of low-voltage switchgear and controlgear — Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories, to be replaced by KS IEC 60715:2017 KS IEC 60127-1:2006 Kenya Standard — Miniature fuses — Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links, to be replaced by KS IEC 60127-2:2020 KS IEC 60127-3:2015 Kenya Standard — Miniature fuses — Part 3: Sub-miniature fuse-links, to be replaced by KS IEC 60127-3:2020 KS IEC/TS 62351-4:2007 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 4: Profiles including MMS, to be replaced by KS IEC 62351-4:2020 KS IEC/TS 62351-6:2007 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 6: Security for IEC 61850, to be replaced by KS IEC 62351-6:2020 KS IEC/TS 62351-7:2010 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 7: Network and System Management (NSM) data object models, to be replaced by KS IEC 62351-7:2017 KS IEC/TS 62351-8:2011 Kenya Standard — Power systems management and associated information exchange — Data and communications security — Part 8: Role-based access control, to be replaced by KS IEC 62351-8:2020 KS IEC 60904-1:2006 Kenya Standard — Photovoltaic devices — Part 1: Measurement of photovoltaic current- voltage characteristics, to be replaced by IEC 60904-1:2020 KS IEC 61215:2005 Kenya Standard — Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval, to be replaced by IEC 61215-1:2021 KS IEC 61646:2008 Kenya Standard — Thin-film terrestrial photovoltaic (PV) modules — Design qualification and type approval, to be replaced by IEC 61215-1:2021 KS IEC 62116:2008 Kenya Standard — Utility-interconnected photovoltaic inverters — Test procedure of islanding prevention measures, to be replaced by KS IEC 62116:2008 KS IEC 61724-1:2017 Kenya Standard — Photovoltaic system performance — Part 1: Monitoring; to be replaced by KS IEC 61724-1:2021 KS ISO 17225-1:2014 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 1: General requirements, to be replaced by KS ISO 17225- 1:2021 KS ISO 17225-2:2014 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 2: Graded wood pellets, to be replaced by KS ISO 17225- 2:2021 6842 6842 KS ISO 17225-3:2014 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 3: Graded wood briquettes, to be replaced by KS ISO 17225-3:2021 KS ISO 17225-4:2014 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 4: Graded wood chips, to be replaced by KS ISO 17225- 4:2021 KS ISO 17225-5:2014 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 5: Graded firewood, to be replaced by KS ISO 17225- 5:2021 KS ISO 17225-6:2014 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 6: Graded non-woody pellets, to be replaced by KS ISO 17225-6:2021 KS ISO 17225-7:2014 Kenya Standard — Solid biofuels — Fuel specifications and classes — Part 7: Graded non-woody briquettes, to be replaced by KS ISO 17225-7:2021 KS IEC 60947-1:1999 Kenya Standard — Low-voltage switchgear and controlgear — Part 1: General rules, to be replaced by KS IEC 60947-1:2020 KS IEC 60947-2:2019 Kenya Standard — Low-voltage switchgear and controlgear — Part 2: Circuit-breakers, to be replaced by KS IEC 60947-2:1996 KS IEC 60947-3:1999 Kenya Standard — Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse- combination units, to be replaced by KS IEC 60947-3:2020 KS IEC 60947-4-1:2012 Kenya Standard — Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters, to be replaced by KS IEC 60947-4-1:2018 KS IEC 60947-4-2:2011 Kenya Standard — Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters, to be replaced by KS IEC 60947-4-2:2020 KS IEC 60947-4-3:2014 Kenya Standard — Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters — Semiconductor controllers and semiconductor contactors for non-motor loads, to be replaced by KS IEC 60947-4-3:2020 KS IEC 60947-5-1:2001 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices, to be replaced by KS IEC 60947-5-1:2016 KS IEC 60947-5-2:2001 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches, to be replaced by KS IEC 60947-5- 2:2016 KS EAS 378-5-3:2005 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions; to be replaced by KS IEC 60947-5-3:2013 KS IEC 60947-5-3:2001 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions; to be replaced by KS IEC 60947-5-3:2013 KS IEC 60947-5-4:2001 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-4: Control circuit devices and switching elements — Method of assessing the performance of low-energy contacts — Special tests; to be replaced by KS IEC 60947-5-4:2019 KS EAS 378-5-5:2005 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function, to be replaced by KS IEC 60947-5- 5:2016 KS IEC 60947-5-5:2005 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function, to be replaced by KS IEC 60947-5- 5:2016 KS EAS 378-5-7:2005 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements — Requirements for proximity devices with analogue output, to be replaced by KS IEC 60947-5-7:2003 KS IEC 60947-5-8:2006 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-8: Control circuit devices and switching elements — Three- position enabling switches, to be replaced by KS IEC 60947-5-8:2020 KS IEC 60947-5-8:2006 Kenya Standard — Low-voltage switchgear and controlgear — Part 5-8: Control circuit devices and switching elements — Three- position enabling switches, to be replaced by KS IEC 60947-5-8:2020 KS IEC 60947-6-1:2005 Kenya Standard — Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Transfer switching equipment, to be replaced by KS IEC 60947-6-1:2021 KS IEC 60947-6-2:2007 Kenya Standard — Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices (or equipment) (CPS), to be replaced by KS IEC 60947-6-2:2020 KS IEC 60947-7-1:2001 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors, to be replaced by KS IEC 60947-7- 1:2009 KS IEC 60947-7-2:2001 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors, to be replaced by KS IEC 60947-7-2:2009 KS IEC 60947-7-3:2002 Kenya Standard — Low-voltage switchgear and controlgear — Part 7-3: Ancillary equipment — Safety requirements for fuse terminal blocks, to be replaced by KS IEC 60947-7-3:2009 KS IEC 60947-8:2003 Kenya Standard — Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines, to be replaced by KS IEC 60947-8:2021 KS IEC 61439-1:2012 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 1: General rules, to be replaced by KS IEC 61439-1:2020 KS IEC 61439-2:2012 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies, to be replaced by KS IEC 61439-2:2020 KS IEC 61439-2:2012 Kenya Standard — Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies, to be replaced by KS IEC 61439-2:2020 KS ISO 50003:2014 Kenya Standard — Energy management systems — Requirements for bodies providing audit and 26th August, 2022 THE KENYA GAZETTE certification of energy management systems, to be replaced by KS ISO 50003:2021 KS ISO 50004:2014 Kenya Standard — Energy management systems — Guidance for the implementation, maintenance and improvement of an energy management system; to be replaced by KS ISO 50004:2020 KS 2806-1:2018 Kenya Standard — Small hydropower system — Design guidelines — Part 1: Civil works, to be replaced by KS IWA 33-3:2021 KS 2806-2:2018 Kenya Standard — Small hydropower system — Design guidelines — Part 2: Technical specification for procurement of electromechanical equipment, to be replaced by KS IWA 33-3:2021 KS 2806-3:2021 Kenya Standard — Small hydropower system — Design guidelines — Part 3: Mechanical systems, to be replaced by KS IWA 33-3:2021 KS 2806-4:2018 Kenya Standard — Small hydropower system — Design guidelines — Part 4: Electrical systems, to be replaced by KS IWA 33-3:2021 KS 2806-5:2021 Kenya Standard — Small hydropower system — Design guidelines — Part 5: Environmental impact analysis and mitigation, to be replaced by KS IWA 33-3:2021 KS 2806-6:2021 Kenya Standard — Small hydropower system — Design guidelines — Part 6: Public safety, to be replaced by KS IWA 33-3:2021 KS 1687:2003 Kenya Standard — Photovoltaic PV systems characteristics of the utility interface, to be replaced by KS IEC 61727:2004 KS ISO/IEC 14763-1:1999 + Amd 1:2004 Kenya Standard — Information Technology — Implementation and operation of customer premises cabling — Part 1: Administration + Amendment 1 2004, to be replaced by KS ISO/IEC 14763-2:2019 KS ISO/IEC 14763-2:2012 Kenya Standard — Information Technology — Implementation and operation of customer premises cabling — Part 2: Planning and installation, to be replaced by KS ISO/IEC 14763-2:2019 KS ISO/IEC 18010:2002 Kenya Standard — Information Technology — Pathways and spaces for customer premises cabling, to be replaced by KS ISO/IEC 14763- 2:2019 KS ISO IEC/TR 20000-5:2013 Kenya Standard — Service management — Part 5 — Exemplar implementation plan for ISO IEC 20000-1, to be replaced by KS ISO/IEC 20000-5:2022 KS ISO IEC/TR 29110-3: 2011 Kenya Standard — Software Engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3: Assessment guide, to be replaced by 29110-3-1:2020 KS ISO/IEC 15026-4:2012 Kenya Standard — Systems and software engineering — Systems and software assurance — Part 4: Assurance in the life cycle, to be replaced by KS ISO/IEC/IEEE 15026-4:2021 KS ISO/IEC 20000-10:2015 Kenya Standard — Information Technology — Service management — Part 10: Concepts and terminology, to be replaced by KS ISO/IEC 20000-10:2018 KS ISO/IEC 20000-11:2015 Kenya Standard — Information Technology — Service management — Part 11: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks ITIL, to be replaced by KS ISO IEC/TS 20000-11:2021 KS ISO/IEC 6429:1988 Kenya Standard — Information Processing — Control functions for 7 bit and 8: bit coded character sets, to be replaced by KS ISO/IEC 6429:1992 KS ISO/IEC 9075-4:2011 Kenya Standard — Information Technology — Database languages — SQL — Part 4: Persistent stored modules (SQL/PSM), to be replaced by KS ISO/IEC 9075-4:2016 KS ISO/IEC 24702:2006 Kenya Standard — Information Technology — Generic cabling — Industrial premises, to be replaced by KS ISO/IEC 11801-3:2017 KS ISO IEC/IEEE 8802-11:2012 Kenya Standard — Information Technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications, to be replaced by KS ISO/IEC/IEEE 8802-11:2018 KS ISO IEC/IEEE 8802-3:2000 Kenya Standard — Information Technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications, to be replaced by KS ISO/IEC/IEEE 8802-3:2021 KS ISO/IEC 15802-1:1995 Kenya Standard — Information Technology — Telecommunications exchange between systems - Local area and metropolitan area networks — Part 1: Medium access control (MAC) service definition, withdrawn without replacement KS ISO/IEC 15802-2:1995 Kenya Standard — Information Technology — Telecommunications exchange between systems — Local area and metropolitan area networks — Part 2: LAN / MAN management, withdrawn without replacement KS ISO/IEC 20000-9:2015 Kenya Standard — Information Technology — Service management — Part 9: Guidance on the application of ISO IEC 20000- 1 to cloud services, withdrawn without replacement KS ISO/IEC 6592:2000 Kenya Standard — Information Technology — Guidelines for the documentation of computer based application systems, withdrawn without replacement KS ISO/IEC 8802-10:1998 Kenya Standard — Information Technology — Telecommunications and information exchange between systems local and metropolitan area networks — Specific requirements — Part 10: Interoperable Lan Man Security (SILS), withdrawn without replacement KS ISO/IEC 8802-12:1998 Kenya Standard — Information Technology — Telecommunications and information exchange between systems local and metropolitan area networks — Specific requirements — Part 12: Demand priority access method physical, withdrawn without replacement KS ISO/IEC 8802-4:1990 Kenya Standard — Information Technology — Telecommunications and information exchange between systems local and metropolitan area networks — Specific requirements — Part 4: Token passing bus access method and physical, withdrawn without replacement KS ISO/IEC 8802-5:1998 Kenya Standard — Information Technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 5: Token ring access method and physical layer specifications, withdrawn without replacement KS ISO/IEC 8802-6:1994 Kenya Standard — Information Technology — Telecommunications and information exchange between systems local and 6844 6844 metropolitan area networks — Specific requirements — Part 6: Distributed Queue Dual Bus (DQDB) access M, withdrawn without replacement KS ISO/IEC 8802-7:1991 Kenya Standard — Information Technology — Telecommunications and information exchange between systems local and metropolitan area networks — Specific requirements — Part 7: Slotted ring access method and physical, withdrawn without replacement KS ISO/IEC 8802-9:1998 Kenya Standard — Information Technology — Telecommunications and information exchange between systems local and metropolitan area networks — Specific requirements — Part 9: Integrated Services (IS) LAN interface at the medium access control (MAC) and Physical (PHY) layers — Specification of IsLAN16-T, withdrawn without replacement KS ISO/IEC 9126-1:2001 Kenya Standard — Software engineering product quality — Part 1: Quality model, withdrawn without replacement KS ISO IEC/TR 29110-3:2011 Kenya Standard — Software engineering lifecycle profiles for Very Small Entities VSEs — Part 3: Assessment Guide Already, to be replaced by KS ISO/IEC 29110- 3-1:2020 KS ISO IEC/TR 8802-1:2001 Kenya Standard — Information Technology — Specification for telecommunications and information exchange between systems — Specific requirements for local and metropolitan area networks — Part 1: Overview of local area, withdrawn without replacement KS ISO/IEC 20027:2015 Kenya Standard — Information Technology — guidelines for slap ten-print finger printture framework, to be replaced by KS ISO/IEC 20027:2018 KS ISO IEC/TR 29196:2015 Kenya Standard — Information technology — Guidance for biometric enrolment, to be replaced by KS ISO IEC/TR 29196:2018 KS ISO/IEC 10373-6:2012 Kenya Standard — Identification cards — Test methods — Part 6: Proximity cards, to be replaced by KS ISO/IEC 10373-6:2020 KS ISO/IEC 18013-1:2010 Kenya Standard — Information Technology — Personal identification — ISO- compliant driving licence — Part 1: Physical characteristics and basic data set, to be replaced by KS ISO/IEC 18013-1:2018 KS ISO/IEC 18328-2:2015 Kenya Standard — Identification cards — ICC-managed devices — Part 2: Physical characteristics and test methods for cards with devices, to be replaced by KS ISO/IEC 18328- 2:2021 KS ISO/IEC 7816-8:2016 Kenya Standard — Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations, to be replaced by KS ISO/IEC 7816-8:2021 KS ISO/IEC 14443-1:2016 Kenya Standard — Cards and security devices for personal identification — Contactless proximity objects — Part 1: Physical characteristics, to be replaced by KS ISO/IEC 14443-1:2018 KS ISO/IEC 14443-2:2016 Kenya Standard — Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio frequency power and signal interface, to be replaced by KS ISO/IEC 14443-2:2020 KS ISO/IEC 14443-3:2016 Kenya Standard — Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initialization and anti-collision, to be replaced by KS ISO/IEC 14443-3:2018 KS ISO/IEC 14443-4:2016 Kenya Standard — Cards and security devices for personal identification — Contactless proximity objects — Part 4: Transmission protocol, to be replaced by KS ISO/IEC 14443-4:2018 KS ISO/IEC 7816-9:2004 Kenya Standard — Identification cards — Integrated circuit cards — Part 9: Commands for card management, to be replaced by KS ISO/IEC 7816-9:2017 KS ISO/IEC 30106-2:2016 Kenya Standard — Information Technology — Object oriented BioAPI — Part 2: Java implementation, to be replaced by KS ISO IEC 30106-2:2020 KS ISO/IEC 30106-3:2016 Kenya Standard — Information Technology — Object oriented BioAPI — Part 3: C# implementation, to be replaced by KS ISO/IEC 30106-3:2020 KS ISO/IEC 16390:1999 Kenya Standard — Information Technology — Automatic identification and data capture techniques — Interleaved 2 of 5 bar code symbology — Specification, to be replaced by KS ISO/IEC 16390:2007 KS ISO/IEC 15416:2000 Kenya Standard — Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols, to be replaced by KS ISO/IEC 15416:2016 KS ISO/IEC 15417:2000 Kenya Standard — Information Technology — Automatic identification and data capture techniques — Code 128 bar code symbology — Specification, to be replaced by KS ISO/IEC 15417:2007 KS ISO/IEC 15420:2000 Kenya Standard — Information Technology — Automatic identification and data capture techniques — EAN/UPC bar code symbology — Specification, to be replaced by KS ISO/IEC 15420:2009 KS ISO/IEC 20933:2016 Kenya Standard — Information Technology — Distributed Application Platforms and Services (DAPS) — Framework for distributed real-time access systems, to be replaced by KS ISO/IEC 20933:2019 KS ISO/IEC 19752:2004 Kenya Standard — Information Technology — Office equipment — Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components, to be replaced by KS ISO/IEC 19752:2017 KS ISO/IEC 19785-3:2015 Kenya Standard — Information Technology — Common biometric exchange formats framework — Part 3: Patron format specifications, to be replaced by KS ISO/IEC 19785-3:2020 KS ISO 5138-1:1978 Kenya Standard — Office machines — Vocabulary — Section 01: Dictation equipment, withdrawn without replacement KS ISO 5138-2:1980 Kenya Standard — Office machines — Vocabulary — Section 02: Duplicators, withdrawn without replacement KS ISO 5138-3:1981 Kenya Standard — Office machines — Vocabulary — Section 03: Addressing machines, withdrawn without replacement KS ISO 5138-4:1981 Kenya Standard — Office machines — Vocabulary — Section 04: Letter opening machines, withdrawn without replacement KS ISO 5138-5:1981 Kenya Standard — Office machines — Vocabulary — Section 05: Letter folding machines, withdrawn without replacement 26th August, 2022 THE KENYA GAZETTE KS ISO 5138-7:1986 Kenya Standard — Office machines — Vocabulary — Part 07: Postal franking machines, withdrawn without replacement KS ISO 5138-9:1984 Kenya Standard — Office machines — Vocabulary — Part 09: Typewriters, withdrawn without replacement KS ISO 6329:1989 Kenya Standard — Duplicators and document copying machines symbols, withdrawn without replacement KS ISO 4232-1:1979 Kenya Standard — Duplicators — Minimum information to be included in specification sheets, withdrawn without replacement KS ISO 4232-2:1980 Kenya Standard — Office machines — Minimum information to be included in specifications sheets — Part 2: Document copying machines, withdrawn without replacement KS ISO 4232-3:1984 Kenya Standard — Office machines — Minimum information to be included in specification sheets — Part 3: Postal franking machines, withdrawn without replacement KS ISO 639-1:2002 Kenya Standard — Codes for the representation of names of languages — Part 1: Alpha-2 code, withdrawn without replacement KS 570:1984 Kenya Standard — Specification for safety requirements for electronic measuring apparatus, to be replaced by KS IEC 61010- 1:2016 KS 718:1985 Kenya Standard — Specification for dimensions for panel mounted indicating and recording electrical measuring instruments, to be replaced by KS IEC 61554:1999 KS 722-1:1986 Kenya Standard — Specification for quartz controlled oscillator — Part 1: general information test conditions and methods, to be replaced by KS IEC 60679-1:2017 KS 722-2:1986 Kenya Standard — Specification for quartz crystal controlled oscillators guide to the use of quartz crystal controlled oscillators, to be replaced by KS IEC 60679-2:1981 KS ISO 2178:1982 Kenya Standard — Non magnetic coating on magnetic substrates measurement of coating thickness magnetic method, to be replaced by KS ISO 2178:2016 KS ISO 2714:1980 Kenya Standard — Liquid hydrocarbons volumetric measurement by displacement meter systems other than dispensing pumps, to be replaced by KS ISO 2714:2017 KS ISO 2715:1981 Kenya Standard — Liquid hydrocarbons volumetric measurement by turbine meter systems, to be replaced by KS ISO 2715:2017 KS IEC 60601-2-45:2001 Kenya Standard — Medical electrical equipment — Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices, to be replaced by KS IEC 60601-2- 45:2015 KS ISO 13600:1997 Kenya Standard — Technical energy systems — Basic concepts, withdrawn without replacement KS ISO 13601:1998 Kenya Standard — Technical energy systems — Structure for analysis — Energyware supply and demand sectors, withdrawn without replacement KS ISO 13602-1:2002 Kenya Standard — Technical energy systems — Methods for analysis — Part 1: General, withdrawn without replacement KS ISO 13602-2:2006 Kenya Standard — Technical energy systems — Methods for analysis — Part 2: Weighting and aggregation of energywares, withdrawn without replacement KS 570:1984 Kenya Standard — Specification for safety requirements for electronic measuring apparatus, to be replaced by KS IEC 61010-1:2016 KS 718:1985 Kenya Standard — Specification for dimensions for panel mounted indicating and recording electrical measuring instruments, to be replaced by KS IEC 61554:1999 KS 722-1:1986 Kenya Standard — Specification for quartz controlled oscillator — Part 1: general information test conditions and methods, to be replaced by KS IEC 60679-1:2017 KS 722-2:1986 Kenya Standard — Specification for quartz crystal controlled oscillators guide to the use of quartz crystal controlled oscallators, to be replaced by KS IEC 60679-2:1981 KS ISO 2178:1982 Kenya Standard — Non magnetic coating on magnetic substrates measurement of coating thickness magnetic method, to be replaced by KS ISO 2178:2016 KS ISO 2714:1980 Kenya Standard — Liquid hydrocarbons volumetric measurement by displacement meter systems other than dispensing pumps, to be replaced by KS ISO 2714:2017 KS ISO 2715:1981 Kenya Standard — Liquid hydrocarbons volumetric measurement by turbine meter systems, to be replaced by KS ISO 2715:2017 KS IEC 60601-2-45:2001 Kenya Standard — Medical electrical equipment — Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices, to be replaced by KS IEC 60601-2- 45:2015 Services KS ISO 7405:1997 Kenya Standard — Dentistry — Evaluation of biocompatibility of medical devices used in dentistry, to be replaced by KS ISO 7405:2018 KS ISO/TS 22595-1:2006 Kenya Standard — Dentistry — Plant area equipment — Part 2: Compressor systems, to be replaced by KS ISO 22052: 2020 KS ISO 10139-2:2009 Kenya Standard — Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long term use, to be replaced by KS ISO 10139-2:2016 KS ISO 15098-1:1999 Kenya Standard — Dental tweezers — Part 1: General requirements, to be replaced by KS ISO 15098:2020 KS ISO 15098-2:2001 Kenya Standard — Dental tweezers — Part 2: Meriam types, to be replaced by KS ISO 15098:2020 KS ISO 15098-3:2000 Kenya Standard — Dental tweezers — Part 3: College types, to be replaced by KS ISO 15098:2020 KS ISO 1797-1:2017 Kenya Standard — Dentistry — Shanks for rotary instruments — Part 1: Shanks made of metals, to be replaced by KS ISO 1797:2017 KS ISO 1797-2:1992 Kenya Standard — Dental rotary instruments — Shanks — Part 2: shanks made of plastics, to be replaced by KS ISO 1797:2017 KS ISO 1942-1:1989 Kenya Standard — Dental vocabulary — Part 1: General and clinical terms, to be replaced by KS ISO 1942:2009 KS ISO 1942-2:1989 Kenya Standard — Dental vocabulary — Part 2: Dental materials, to be replaced by KS ISO 1942:2009 KS ISO 1942-3:1989 Kenya Standard — Dental vocabulary — Part 3: Dental instruments, to be replaced by KS ISO 1942:2009 6846 6846 KS ISO 1942-4:1989 Kenya Standard — Dental vocabulary — Part 4: Dental equipment, to be replaced by KS ISO 1942:2009 KS ISO 1942-1:1989 Kenya Standard — Dental vocabulary — Part 1: General and clinical terms, to be replaced by KS ISO 1942:2020 KS ISO 1942-2:1989 Kenya Standard — Dental vocabulary — Part 2: Dental materials, to be replaced by KS ISO 1942-2:2020 KS ISO 1942-3:1989 Kenya Standard — Dental vocabulary — Part 3: Dental instruments, to be replaced by KS ISO 1942-3:2020 KS ISO 1942-4:1989 Kenya Standard — Dental vocabulary — Part 4: Dental equipment, to be replaced by KS ISO 1942-4:2020 KS ISO 3630-1:2008 Kenya Standard — Dentistry — Toot canal instruments — Part 1: General requirements and test methods, to be replaced by KS ISO 3650:2019 KS ISO 3950:2009 Kenya Standard — Dentistry — Designation system for teeth and areas of the oral cavity, to be replaced by KS ISO 3950:2016 KS ISO 8627:1987 Kenya Standard — Dentistry — Determination of stiffness of the tufted area of toothbrushes, to be replaced by KS ISO 20126:2022 KS ISO 9873:1998 Kenya Standard — Dental hand instruments — Reusable mirrors and handles, to be replaced by KS ISO 9873:2019 KS ISO 10993-12:2002 Kenya Standard — Biological evaluation of medical devices — Part 12: Sample preparation and reference materials, to be replaced by KS ISO 10993-12:2021 KS ISO 10993-13:1998 Kenya Standard — Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices, to be replaced by KS ISO 10993-13:2010 KS ISO 10993-15:2000 Kenya Standard — Biological evaluation of medical devices — Part 15: Identification and quantification of degradation products from metals and alloys, to be replaced by KS ISO 10993-15:2019 KS ISO 10993-16:1997 Kenya Standard — Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables, to be replaced by KS ISO 10993-16:2017 KS ISO 10993-10:2002 Kenya Standard — Biological evaluation of medical devices — Part 10: Tests for irritation and delayed type hypersensitivity, to be replaced by KS ISO 10993-16:2021 KS ISO 19001:2002 Kenya Standard — In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology, to be replaced by KS ISO 19001:2013 KS ISO 8536-1:2000 Kenya Standard — Infusion equipment for medical use — Part 1: Infusion glass bottles, to be replaced by KS ISO 8536-1:2011 KS ISO 8536-2:2001 Kenya Standard — Infusion equipment for medical use — Part 2: Closure for infusion bottles, to be replaced by KS ISO 8536-2:2010 KS ISO 8536-3:1999 Kenya Standard — Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles, to be replaced by KS ISO 8536-3:2009 KS ISO 8536-4:1998 Kenya Standard — Infusion equipment for medical use — Part 4: Infusion sets for single use gravity feed, to be replaced by KS ISO 8536-4:2019 KS ISO 26722:2014 Kenya Standard — Water treatment equipment for haemodialysis applications and related therapies, to be replaced by KS ISO 23500:2019 KS IEC 60601-2-33:2002 Kenya Standard — Medical electrical equipment — Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis, to be replaced by KS IEC 60601-2-33:2010 KS IEC 60601-2-43:2000 Kenya Standard — Medical electrical equipment — Part 2-43: Particular requirements for the safety of X ray equipment for interventional procedures, to be replaced by KS IEC 60601-2-43:2010 KS ISO 1135-1:1987 Kenya Standard — Transfusion equipment for medical use — Part 1: Glass transfusion bottles closures and caps, withdrawn without replacement KS 1816:2005 Kenya Standard — Sharps containers — Specification, to be replaced by KS ISO 23907- 1:2019 and KS ISO 23907-2:2019 KS ISO 4849:1981 Kenya Standard — Personal eye protectors — Specification, to be replaced by KS ISO 16321:2021 KS ISO 4854:1981 Kenya Standard — Personal eye protectors — Optical test methods, to be replaced by KS ISO 18526-1:2020 KS ISO 4855:1981 Kenya Standard — Personal eye protectors — Non optical test methods, to be replaced by KS ISO 18526-3:2020 KS ISO 5367:2000 Kenya Standard — Breathing tubes intended for use with anaesthetic apparatus and ventilators, to be replaced by KS ISO 5367:2014 KS ISO 4135:2001 Kenya Standard — Anaesthetic and respiratory equipment — Vocabulary, to be replaced by KS ISO 4135:2022 KS ISO 7153-1:1991 Kenya Standard — Surgical instruments — Metallic materials — Specification — Part 1: Stainless steel, to be replaced by KS ISO 7153:2016 KS 1818:2005 Kenya Standard — Sterile surgical suture and ligature materials — Specification, to be replaced by KS EAS 1019-1: 2021 and KS EAS 1019-2: 2021 KS ISO 14031:2013 Kenya Standard — Environmental management — Environmental performance evaluation — Guidelines, to be replaced by KS ISO 14031:2021 KS ISO 14064-1:2006 Kenya Standard — Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals, to be replaced by KS ISO 14064-1:2018 KS ISO 14064-2:2006 Kenya Standard — Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements, to be replaced by KS ISO 14064- 2:2019 KS ISO 14064-3:2006 Kenya Standard — Greenhouse gases — Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions, to be replaced by KS ISO 14064-3:2019 KS ISO 14040:2006 Kenya Standard — Environmental management — Life cycle assessment — Principles and framework, to be replaced by KS ISO 14040:2006/Amd 1:2020 KS ISO/IEC17030:2003 Kenya Standard — Conformity assessment — General requirements for third-party marks of conformity, to be replaced by KS ISO/IEC 17030:2021 KS ISO/IEC GUIDE 23:1982 Kenya Standard — Methods of indicating conformity with standards for third- 26th August, 2022 THE KENYA GAZETTE party certification systems, to be replaced by KS ISO/IEC 17030:2021 KS ISO/IEC GUIDE 27:1983 Kenya Standard — Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of conformity, to be replaced by KS ISO/IEC 17030:2021 KS ISO 22300:2018 Kenya Standard — Security and resilience — Vocabulary, to be replaced by KS ISO 22300:2021 KS ISO 7341:2005 Kenya Standard — Banking nostro accounts reconciliation, withdrawn without replacement by ISO KS ISO 10962:2019 Kenya Standard — Securities and related financial instruments — Classification of Financial Instruments (CFI) code, to be replaced by KS ISO 10962:2021 Dated the 23rd August, 2022. BERNARD N. NJIRAINI, PTG No. 332/22-23 Secretary, National Standards Council.